Non-contact specular microscopy in aphakic and pseudophakic dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Categorias e mecanismos de resistência de genótipos de couve A Spodoptera frugiperda (J. E. Smith, 1797) (Lepidoptera: Noctuidae)

Pós-graduação em Agronomia (Entomologia Agrícola) - FCAV

Cleaning Conveyor Belts in the Chicken-Cutting Area of a Poultry Processing Plant with 45 degrees C Water

Conveyor belts are widely used in food handling areas, especially in poultry processing plants. Because they are in direct contact with food and it is a requirement of the Brazilian health authority, conveyor belts are required to be continuously cleaned with hot water under pressure. The use of water in this procedure has been questioned based on the hypothesis that water may further disseminate microorganisms but not effectively reduce the organic material on the surface. Moreover, reducing the use of water in processing may contribute to a reduction in costs and emission of effluents. However, no consistent evidence in support of removing water during conveyor belt cleaning has been reported. Therefore, the objective of the present study was to compare the bacterial counts on conveyor belts that were or were not continuously cleaned with hot water under pressure. Superficial samples from conveyor belts (cleaned or not cleaned) were collected at three different times during operation (T1, after the preoperational cleaning [5 a.m.]; T2, after the first work shift [4 p.m.]; and T3, after the second work shift [1:30 a.m.]) in a poultry meat processing facility, and the samples were subjected to mesophilic and enterobacterial counts. For Enterobacteriaceae, no significant differences were observed between the conveyor belts, independent of the time of sampling or the cleaning process. No significant differences were observed between the counts of mesophilic bacteria at the distinct times of sampling on the conveyor belt that had not been subjected to continuous cleaning with water at 45 degrees C. When comparing similar periods of sampling, no significant differences were observed between the mesophilic counts obtained from the conveyor belts that were or were not subjected to continuous cleaning with water at 45 degrees C. Continuous cleaning with water did not significantly reduce microorganism counts, suggesting the possibility of discarding this procedure in chicken processing.

Effect of the Layering Technique on Bond Strength and Cohesive Resistance of a Porcelain-Zirconia System

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Aerobic Training Prevents Dexamethasone-Induced Peripheral Insulin Resistance

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Alterações nas propriedades físicas de um latossolo vermelho-escuro sob diferentes culturas

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Processamento e caracterização de compósito fibra de sisal/resina epóxi via RTM

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Resistance training with excessive training load and insufficient recovery alters skeletal muscle mass-related protein expression

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Thickness and marking quality of different occlusal contact registration strips

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Inspeção de Precaução de Contato: relato de Experiência de uma Graduanda de Enfermagem Botucatu

Infections Related to Healthcare (IRAS) is a problem of worldwide concern, responsible for much morbidity and lethality. The incidence of IRAS associated with resistant microorganisms has increased worldwide. It is also known that the etiology of bacterial resistance is multifactorial, thus controlling the spread of resistant microorganisms requires the implementation of control measures that involve the performance of standard and contact precautions, plus the use of antimicrobials. To diagnose the problem as to the likely accession of the measures of infection control was prepared in a form to inspect the practices of the health staff acting with patients in contact precautions. The inspections had an educational and awareness, no punitive measures were taken to staff as warnings, suspensions or complains of a breach of ethics. If any irregularities were found, the professional standards of care countershaft contact and the nurse responsible for the head nurse or unit area were notified and counseled about the correct practice of isolation. While an undergraduate student initiated precautionary inspections of contact in order to verify the actual use of isolation measures, since the professionals were unaware of my active participation in the Committee on Infection Control. Facilities and difficulties were encountered in the process, and from the inspections was possible interventions to facilitate compliance with standards for isolation imposed by contact. Since the instrument has significantly improved adherence to contact isolation practices, the members of the Infection Control regulated inspections and intend to use it as a permanent method

Study of corrosion resistance of laser welded Au-Pd-Ag-In alloy using electrochemical.

The aim of this work was to evaluate the corrosion resistance of AuPdAgIn alloy, submitted to laser beam welding, in 0.9% NaCl solution, using electrochemical techniques. Measures of the open circuit potential (OCP) versus time were applied to electrochemical experiments, as well as potentiodynamic direct scanning (PDS) and electrochemical impedance spectroscopy (EIS) on AuPdAgIn alloy, submitted to laser beam welding in 0.9% NaCl solution. Some differences observed in the microstructure can explain the results obtained for corrosion potential, Ecorr, and corrosion resistance, Rp. EIS spectra have been characterized by distorted capacitive components, presenting linear impedance at low frequencies, including a non-uniform diffusion. The area of the laser weld presented corrosion potential slightly superior when compared to the one of the base metal. The impedance results suggest the best resistant corrosion behavior for laser weld than base metal region. This welding process is a promising alternative to dental prostheses casting.

Implantes nanotopograficamente modificados pela ação do laser Yb-YAG

Titanium has proven its suitability as an implant material in surgery over many years. Excellent biocompatibility and corrosion resistance are outstanding features. Implant surfaces always causes concern and interest in scientific communities, due to its close relationship with the time required for osseointegration. Surface modification can be performed by several methods, being laser irradiation one of them. Titanium implants with two different surfaces were inserted in rabbits: Group I (G-I: machined surface, control group), and group II (G-II: laser irradiated, test group) being processed 30 and 60 days after surgery for histological analysis. Surface characterization was performed with SEM-EDS, contact angle measurement, and mean roughness (Ra) parameters. Surface analysis in the GII group showed a nanomorphology affected by melt and quick solidification zones following laser irradiation (SEM), as well as total wettability and Ra mean values significantly higher than in the G-I group. The laser treatment resulted in a homogenized, porous surface, with increased surface area and volume. Histological analysis of bone-implant contact linear extension (BIC) showed better results in G-II at 30 days (39.26 ± 18.23 and 68.41 ± 13.68 for G-I and G-II groups, respectively). Titanium implants modified by laser irradiation showed important features that may accelerate early osseointegration.

Efeito do teor de água na avaliação da compactação do solo causada pelo tráfego agrícola e seu reflexo nos atributos físicos do solo

Pós-graduação em Agronomia (Energia na Agricultura) - FCA

Changes in nuclear morphology and chromatin texture of basal keratinocytes in melasma

BackgroundThe pathogenesis of melasma and the role of keratinocytes in disease development and maintenance are not completely understood. Dermal abnormalities, the expression of inflammatory mediators, growth factors, epithelial expression of melanocortin and sexual hormones receptors suggest that not only melanocytes, but entire epidermal melanin unit is involved in melasma physiopathology.ObjectivesTo compare nuclear morphological features and chromatin texture between basal keratinocytes in facial melasma and adjacent normal skin.MethodsWe took facial skin biopsies (2mm melasma and adjacent normal skin) from women processed for haematoxylin and eosin. Thirty non-overlapping basal keratinocyte nuclei were segmented and descriptors of area, highest diameter, perimeter, circularity, pixel intensity, profilometric index (Ra) and fractal dimension were extracted using ImageJ software.ResultsBasal keratinocyte nuclei from facial melasma epidermis displayed larger size, irregular shape, hyperpigmentation and chromatin heterogeneity by fractal dimension than perilesional skin.ConclusionBasal keratinocytes from facial melasma display changes in nuclear form and chromatin texture, suggesting that the phenotype differences between melasma and adjacent facial skin can result from complete epidermal melanin unit alterations, not just hypertrophic melanocytes.

Phenotypic and genetic features of enteropathogenic Escherichia coli isolates from diarrheal children in the Ribeirao Preto metropolitan area, Sao Paulo State, Brazil

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)