Seals and the Need for more Deference to Vienna by WTO Adjudicators

This paper asks how World Trade Organization (WTO) panels and the Appellate Body (AB) take public international law (PIL) into account when interpreting WTO rules as a part of international economic law (IEL). Splendid isolation of the latter is not new; indeed it is intended by the negotiators of the Understanding on the Settlement of Disputes (DSU). At the same time, the Vienna Convention on the Law of Treaties (VCLT) is quite clear when it provides the general rules and the supplementary means of treaty interpretation. Despite such mandatory guidance, WTO adjudicators (when given a choice and assuming they see the conflict) prefer deference to WTO law over deference to Vienna and take a dogmatic way out of interpretation quandaries. The AB and panels make abundant reference to Vienna, though less so to substantive PIL. Often times, however, they do so simply in order to buttress their findings of violations of WTO rules. Perhaps tellingly, however, none of the reports in EC – Seals contains even a single mention of VCLT, despite numerous references to international standards addressing indigenous rights and animal welfare. In the longer term, and absent a breakthrough on the negotiation front, this pattern of carefully eschewing international treaty law and using PIL just for the sake of convenience could have serious consequences for the credibility and acceptance of the multilateral trading system. Following the adage ‘negotiate or litigate’ recourse to WTO dispute settlement increases when governments are less ready to make treaty commitments commensurate with the challenges of globalisation. This is true even for ‘societal choice’ cases on the margins of classic trade disputes. We will argue here that it is precisely for cases such as these that VCLT and PIL should be used more systematically by panels and the AB. Failing that, instead of building bridges for more coherent international regulation, WTO adjudicators could burn those same bridges which the DSU interpretation margin leaves open for accomplishing their job which is to find a ‘positive solution’. Worse, judicial incoherence could return to WTO dispute settlement like a boomerang and damage the credibility and thus the level of acceptance of the multilateral trading system per se.

A geographic information science (GIS) approach to conducting comparative area-level community assessments in the Texas CORD Study

This study assessed and compared sociodemographic and income characteristics along with food and physical activity assets (i.e. grocery stores, fast food restaurants, and park areas) in the Texas Childhood Obesity Research Demonstration (CORD) Study intervention and comparison catchment areas in Houston and Austin, Texas. The Texas CORD Study used a quasi-experimental study design, so it is necessary to establish the interval validity of the study characteristics by confirming that the intervention and comparison catchment areas are statistically comparable. In this ecological study, ArcGIS and Esri Business Analyst were used to spatially relate U.S. Census Bureau and other business listing data to the specific school attendance zones within the catchment areas. T-tests were used to compare percentages of sociodemographic and income characteristics and densities of food and physical activity assets between the intervention and comparison catchment areas.^ Only five variables were found to have significant differences between the intervention and comparison catchment areas: Age groups 0-4 and 35-64, the percentage of owner-occupied and renter-occupied households, and the percentage of Asian and Pacific Islander residents. All other variables showed no significant differences between the two groups. This study shows that the methodology used to select intervention and comparison catchment areas for the Texas CORD Study was effective and can be used in future studies. The results of this study can be used in future Texas CORD studies to confirm the comparability of the intervention and comparison catchment areas. In addition, this study demonstrates a methodology for describing detailed characteristics about a geographic area that practitioners, researchers, and educators can use.^

Table 1 Microorganisms, identified with DOGE analysis. 16S rDNA sequences, obtained from sequencing of DOGE bands, were assigned to the corresponding microorganisms

Microorganisms play an important role in the transformation of material within the earth's crust. The storage of CO2 could affect the composition of inorganic and organic components in the reservoir, consequently influencing microbial activities. To study the microbial induced processes together with geochemical, petrophysical and mineralogical changes, occurring during CO2 storage, long-term laboratory experiments under simulated reservoir P-T conditions were carried out. Clean inner core sections, obtained from the reservoir region at the CO2 storage site in Ketzin (Germany) from a depth of about 650 m, were incubated in high pressure vessels together with sterile synthetic formation brine under in situ P-T conditions of 5.5 MPa and 40°C. A 16S rDNA based fingerprinting method was used to identify the dominant species in DNA extracts of pristine sandstone samples. Members of the alpha- and beta-subdivisions of Proteobacteria and the Actinobacteria were identified. So far sequences belonging to facultative anaerobic, chemoheterotrophic bacteria (Burkholderia fungorum, Agrobacterium tumefaciens) gaining their energy from the oxidation of organic molecules and a genus also capable of chemolithoautotrophic growth (Hydrogenophaga) was identified. During CO2 incubation minor changes in the microbial community composition were observed. The majority of microbes were able to adapt to the changed conditions. During CO2 exposure increased concentrations of Ca**2+, K**+, Mg**2+ and SO4**2- were observed. Partially, concentration rises are (i) due to equilibration between rock pore water and synthetic brine, and (ii) between rock and brine, and are thus independent on CO2 exposure. However, observed concentrations of Ca**2+, K**+, Mg**2+ are even higher than in the original reservoir fluid and therefore indicate mineral dissolution due to CO2 exposure.

To fuse or not to fuse? Assessing the case for convergent disciplines on goods and services trade

Think piece by Pierre Sauvé for the E15 Initiative on Strengthening the Global Trade System In his latest essay for the ICTSD-World Economic Forum E15 initiative on Strengthening the Global Trade and Investment System for Sustainable Development, WTI Director of External Programmes and Academic Partnerships and faculty member Pierre Sauvé explores the case for fusing the law of goods with that of services in a world of global value chains. The paper does so by directing attention to the questions of whether the current architectures of multilateral and preferential trade governance are compatible with a world of trade in tasks; whether the existing rules offer globally active firms a coherent structure for doing business in a predictable environment; whether it is feasible to redesign the structure and content of existing trade rules to align them to the reality of production fragmentation; and what steps can be envisaged to better align policy and realities in the marketplace if the prospects for restructuring appear unfavourable. The paper argues that fusing trade disciplines for goods and services is neither needed nor feasible and may actually deflect attention from a number of worthwhile policy initiatives where more realistic (if never easily secured) prospects of generic rule-making may well exist.

From authoritarianism to upheaval : the political economy of the Syrian uprising and regime persistence

The ensuing bloodshed and deteriorating humanitarian crisis in Syria, the failure of the United Nations Security Council to reach a consensus on what action to take, and the involvement of contending external actors partially reflect the complexity of the current impasse. Despite the importance of regional and international factors, however, this papers attempts to argue that the domestic dynamics of the Syrian crisis have been vitally important in determining the course of the popular uprising and the regime’s response. In this, Syria’s crisis belongs with the Arab Spring the trajectories and prospects of which have been shaped by dynamics within regimes. It will be seen that the formal and informal institutional structure of the Ba‘thist regime in Syria has been critical to its resilience and ability to stay united so far while attempting to crush a peaceful popular uprising that turned into insurgency in the face of the regime’s violent crackdown.

A multinational SDI-based system to facilitate disaster risk management in the Andean Community

A useful strategy for improving disaster risk management is sharing spatial data across different technical organizations using shared information systems. However, the implementation of this type of system requires a large effort, so it is difficult to find fully implemented and sustainable information systems that facilitate sharing multinational spatial data about disasters, especially in developing countries. In this paper, we describe a pioneer system for sharing spatial information that we developed for the Andean Community. This system, called SIAPAD (Andean Information System for Disaster Prevention and Relief), integrates spatial information from 37 technical organizations in the Andean countries (Bolivia, Colombia, Ecuador, and Peru). SIAPAD was based on the concept of a thematic Spatial Data Infrastructure (SDI) and includes a web application, called GEORiesgo, which helps users to find relevant information with a knowledge-based system. In the paper, we describe the design and implementation of SIAPAD together with general conclusions and future directions which we learned as a result of this work.

Assessing the impact of adaptive accessibility on the optimal transport policy implementation by using an integrated land-use/transport model for Madrid

Accessibility is an essential concept widely used to evaluate the impact of land-use and transport strategies in transport and urban planning. Accessibility is typically evaluated by using a transport model or a land-use model independently or successively without a feedback loop, thus neglecting the interaction effects between the two systems and the induced competition effects among opportunities due to accessibility improvements. More than a mere methodological curiosity, failure to account for land- use/transport interactions and the competition effect may result in large underestimation of the policy effects. With the recent development of land-use and transport interaction (LUTI) models, there is a growing interest in using these models to adequately measure accessibility and evaluate its impact. The current study joins this research stream by embedding an accessibility measure in a LUTI model with two main aims. The first aim is to account for adaptive accessibility, namely the adjustment of the potential accessibility due to the effect of competition among opportunities (e.g., workplaces) as a result of improved accessibility. LUTI models are particularly suitable for assessing adaptive accessibility because the competition factor is a function of the number of jobs, which is related to land-use attractiveness and the number of workers which is related, among other factors, to the transport demand. The second aim is to identify the optimal implementation scenario of policy measures on the basis of the potential and adaptive accessibility and analyse the results in terms of social welfare and accessibility. The metropolitan area of Madrid is used as a case-study and two transport policy instruments, namely a cordon toll and bus frequency increase, have been chosen for the simulation study in order to present the usefulness of the approach to urban planners and policy makers. The MARS model (Metropolitan Activity Relocation Simulator) calibrated for Madrid was employed as the analysis tool. The impact of accessibility is embedded in the model through a social welfare function that includes not only costs and benefits to both road users and transport operators, but also costs and benefits for the government and society in general (external costs). An optimisation procedure is performed by the MARS model for maximizing the value of objective function in order to find the best (optimal) policy imp lementations intensity (i.e., price, frequency). Last, the two policy strategies are evaluated in terms of their accessibility. Results show that the accessibility with competition factor influences the optimal policy implementation level and also generates different results in terms of social welfare. In addition, mapping the difference between the potential and the adaptive accessibility indicators shows that the main changes occur in areas where there is a strong competition among land-use opportunities.

Drivers in adopting adaptation strategies to face increased water scarcity in agriculture. A case study in Doñana (Spain) and Makueni (Kenya)

La agricultura es uno de los sectores más afectados por el cambio climático. A pesar de haber demostrado a lo largo de la historia una gran capacidad para adaptarse a nuevas situaciones, hoy en día la agricultura se enfrenta a nuevos retos tales como satisfacer un elevado crecimiento en la demanda de alimentos, desarrollar una agricultura sostenible con el medio ambiente y reducir las emisiones de gases de efecto invernadero. El potencial de adaptación debe ser definido en un contexto que incluya el comportamiento humano, ya que éste juega un papel decisivo en la implementación final de las medidas. Por este motivo, y para desarrollar correctamente políticas que busquen influir en el comportamiento de los agricultores para fomentar la adaptación a estas nuevas condiciones, es necesario entender previamente los procesos de toma de decisiones a nivel individual o de explotación, así como los efectos de los factores que determinan las barreras o motivaciones de la implementación de medidas. Esta Tesis doctoral trata de profundizar en el análisis de factores que influyen en la toma de decisiones de los agricultores para adoptar estrategias de adaptación al cambio climático. Este trabajo revisa la literatura actual y desarrolla un marco metodológico a nivel local y regional. Dos casos de estudio a nivel local (Doñana, España y Makueni, Kenia) han sido llevados a cabo con el fin de explorar el comportamiento de los agricultores hacia la adaptación. Estos casos de estudio representan regiones con notables diferencias en climatología, impactos del cambio climático, barreras para la adaptación y niveles de desarrollo e influencia de las instituciones públicas y privadas en la agricultura. Mientras el caso de estudio de Doñana representa un ejemplo de problemas asociados al uso y escasez del agua donde se espera que se agraven en el futuro, el caso de estudio de Makueni ejemplifica una zona fuertemente amenazada por las predicciones de cambio climático, donde adicionalmente la falta de infraestructura y la tecnología juegan un papel crucial para la implementación de la adaptación. El caso de estudio a nivel regional trata de generalizar en África el comportamiento de los agricultores sobre la implementación de medidas. El marco metodológico que se ha seguido en este trabajo abarca una amplia gama de enfoques y métodos para la recolección y análisis de datos. Los métodos utilizados para la toma de datos incluyen la implementación de encuestas, entrevistas, talleres con grupos de interés, grupos focales de discusión, revisión de estudios previos y bases de datos públicas. Los métodos analíticos incluyen métodos estadísticos, análisis multi‐criterio para la toma de decisiones, modelos de optimización de uso del suelo y un índice compuesto calculado a través de indicadores. Los métodos estadísticos se han utilizado con el fin de evaluar la influencia de los factores socio‐económicos y psicológicos sobre la adopción de medidas de adaptación. Dentro de estos métodos se incluyen regresiones logísticas, análisis de componentes principales y modelos de ecuaciones estructurales. Mientras que el análisis multi‐criterio se ha utilizado con el fin de evaluar las opciones de adaptación de acuerdo a las opiniones de las diferentes partes interesadas, el modelo de optimización ha tenido como fin analizar la combinación óptima de medidas de adaptación. El índice compuesto se ha utilizado para evaluar a nivel regional la implementación de medidas de adaptación en África. En general, los resultados del estudio ponen de relieve la gran importancia de considerar diferentes escalas espaciales a la hora de evaluar la implementación de medidas de adaptación al cambio climático. El comportamiento de los agricultores es diferente entre lugares considerados a una escala local relativamente pequeña, por lo que la generalización de los patrones del comportamiento a escalas regionales o globales resulta relativamente compleja. Los resultados obtenidos han permitido identificar factores determinantes tanto socioeconómicos como psicológicos y calcular su efecto sobre la adopción de medidas de adaptación. Además han proporcionado una mejor comprensión del distinto papel que desempeñan los cinco tipos de capital (natural, físico, financiero, social y humano) en la implementación de estrategias de adaptación. Con este trabajo se proporciona información de gran interés en los procesos de desarrollo de políticas destinadas a mejorar el apoyo de la sociedad a tomar medidas contra el cambio climático. Por último, en el análisis a nivel regional se desarrolla un índice compuesto que muestra la probabilidad de adoptar medidas de adaptación en las regiones de África y se analizan las causas que determinan dicha probabilidad de adopción de medidas. ABSTRACT Agriculture is and will continue to be one of the sectors most affected by climate change. Despite having demonstrated throughout history a great ability to adapt, agriculture today faces new challenges such as meeting growing food demands, developing sustainable agriculture and reducing greenhouse gas emissions. Adaptation policies planned on global, regional or local scales are ultimately implemented in decision‐making processes at the farm or individual level so adaptation potentials have to be set within the context of individual behaviour and regional institutions. Policy instruments can play a formative role in the adoption of such policies by addressing incentives/disincentives that influence farmer’s behaviour. Hence understanding farm‐level decision‐making processes and the influence of determinants of adoption is crucial when designing policies aimed at fostering adoption. This thesis seeks to analyse the factors that influence decision‐making by farmers in relation to the uptake of adaptation options. This work reviews the current knowledge and develops a methodological framework at local and regional level. Whilst the case studies at the local level are conducted with the purpose of exploring farmer’s behaviour towards adaptation the case study at the regional level attempts to up‐scale and generalise theory on adoption of farmlevel adaptation options. The two case studies at the local level (Doñana, Spain and Makueni, Kenya) encompass areas with different; climates, impacts of climate change, adaptation constraints and limits, levels of development, institutional support for agriculture and influence from public and private institutions. Whilst the Doñana Case Study represents an area plagued with water‐usage issues, set to be aggravated further by climate change, Makueni Case study exemplifies an area decidedly threatened by climate change where a lack of infrastructure and technology plays a crucial role in the uptake of adaptation options. The proposed framework is based on a wide range of approaches for collecting and analysing data. The approaches used for data collection include the implementation of surveys, interviews, stakeholder workshops, focus group discussions, a review of previous case studies, and public databases. The analytical methods include statistical approaches, multi criteria analysis for decision‐making, land use optimisation models, and a composite index based on public databases. Statistical approaches are used to assess the influence of socio‐economic and psychological factors on the adoption or support for adaptation measures. The statistical approaches used are logistic regressions, principal component analysis and structural equation modelling. Whilst a multi criteria analysis approach is used to evaluate adaptation options according to the different perspectives of stakeholders, the optimisation model analyses the optimal combination of adaptation options. The composite index is developed to assess adoption of adaptation measures in Africa. Overall, the results of the study highlight the importance of considering various scales when assessing adoption of adaptation measures to climate change. As farmer’s behaviour varies at a local scale there is elevated complexity when generalising behavioural patterns for farmers at regional or global scales. The results identify and estimate the effect of most relevant socioeconomic and psychological factors that influence adoption of adaptation measures to climate change. They also provide a better understanding of the role of the five types of capital (natural, physical, financial, social, and human) on the uptake of farm‐level adaptation options. These assessments of determinants help to explain adoption of climate change measures and provide helpful information in order to design polices aimed at enhancing societal support for adaptation policies. Finally the analysis at the regional level develops a composite index which suggests the likelihood of the regions in Africa to adopt farm‐level adaptation measures and analyses the main causes of this likelihood of adoption.

Transformación del espacio cinemático Laban para la evaluación del movimiento

Este proyecto tiene como objetivo la implementación de un sistema capaz de analizar el movimiento corporal a partir de unos puntos cinemáticos. Estos puntos cinemáticos se obtienen con un programa previo y se captan con la cámara kinect. Para ello el primer paso es realizar un estudio sobre las técnicas y conocimientos existentes relacionados con el movimiento de las personas. Se sabe que Rudolph Laban fue uno de sus mayores exponentes y gracias a sus observaciones se establece una relación entre la personalidad, el estado anímico y la forma de moverse de un individuo. Laban acuñó el término esfuerzo, que hace referencia al modo en que se administra la energía que genera el movimiento y de qué manera se modula en las secuencias, es una manera de describir la intención de las expresiones internas. El esfuerzo se divide en 4 categorías: peso, espacio, tiempo y flujo, y cada una de estas categorías tiene una polaridad denominada elemento de esfuerzo. Con estos 8 elementos de esfuerzo un movimiento queda caracterizado. Para poder cuantificar los citados elementos de esfuerzo se buscan movimientos que representen a alguno de ellos. Los movimientos se graban con la cámara kinect y se guardan sus valores en un archivo csv. Para el procesado de estos datos se establece que el sistema más adecuado es una red neuronal debido a su flexibilidad y capacidad a la hora de procesar entradas no lineales. Para la implementación de la misma se requiere un amplio estudio que incluye: topologías, funciones de activación, tipos de aprendizaje, algoritmos de entrenamiento entre otros. Se decide que la red tenga dos capas ocultas, para mejor procesado de los datos, que sea estática, siga un proceso de cálculo hacia delante (Feedforward) y el algoritmo por el que se rija su aprendizaje sea el de retropropagación (Backpropagation) En una red estática las entradas han de ser valores fijos, es decir, no pueden variar en el tiempo por lo que habrá que implementar un programa intermedio que haga una media aritmética de los valores. Una segunda prueba con la misma red trata de comprobar si sería capaz de reconocer movimientos que estuvieran caracterizados por más de un elemento de esfuerzo. Para ello se vuelven a grabar los movimientos, esta vez en parejas de dos, y el resto del proceso es igual. ABSTRACT. The aim of this project is the implementation of a system able to analyze body movement from cinematic data. This cinematic data was obtained with a previous program. The first step is carrying out a study about the techniques and knowledge existing nowadays related to people movement. It is known that Rudolf Laban was one the greatest exponents of this field and thanks to his observations a relation between personality, mood and the way the person moves was made. Laban coined the term effort, that refers to the way energy generated from a movement is managed and how it is modulated in the sequence, this is a method of describing the inner intention of the person. The effort is divided into 4 categories: weight, space, time and flow, and each of these categories have 2 polarities named elements of effort. These 8 elements typify a movement. We look for movements that are made of these elements so we can quantify them. The movements are recorded with the kinect camera and saved in a csv file. In order to process this data a neural network is chosen owe to its flexibility and capability of processing non-linear inputs. For its implementation it is required a wide study regarding: topology, activation functions, different types of learning methods and training algorithms among others. The neural network for this project will have 2 hidden layers, it will be static and follow a feedforward process ruled by backpropagation. In a static net the inputs must be fixed, this means they cannot vary in time, so we will have to implement an intermediate program to calculate the average of our data. A second test for our net will be checking its ability to recognize more than one effort element in just one movement. In order to do this all the movements are recorded again but this time in pairs, the rest of the process remains the same.

Diseño y construcción de una mini-turbina eólica

Dado que es difícil imaginar en el futuro una sociedad moderna donde la energía no juegue un papel fundamental y puesto que numerosos estudios han demostrado que el ritmo actual de consumo de combustibles es insostenible y perjudicial para la vida del planeta, es fundamental concienciar a la humanidad de que un cambio de tendencia no solo es necesario sino que es imperativo. No se trata de erradicar por completo el uso de fuentes de carácter fósil, pues en muchos países es su principal o incluso su única forma de obtener energía, sino de avanzar hacia un equilibrio en la generación, para lo que será vital permitir el desarrollo de energías limpias, aumentar la eficiencia de la tecnología y reducir el consumo. En este contexto se ha decidido construir un rotor eólico de pequeñas dimensiones que servirá como herramienta de estudio para alumnos de ingeniería. Para diseñar la turbina se ha desarrollado un modelo de programación informática que, basado en conceptos aerodinámicos, permite calcular la geometría de las palas en función de unas condiciones iniciales, estimar la potencia del rotor y obtener sus curvas de funcionamiento. Uno de los principales problemas de la tecnología eólica es su alta variabilidad, por ello se ha implementado un sistema de regulación de velocidad; se trata de un mecanismo que actúa sobre la orientación de las palas y permite regular la potencia de un generador eléctrico acoplado al rotor. Los aerogeneradores actuales recurren a este tipo de sistemas para tratar de suavizar los desequilibrios de potencia que puedan producir las ráfagas de viento. Se ha recurrido a un software de diseño asistido por ordenador para dibujar tanto el rotor como el sistema de regulación de velocidad. La mayoría de las piezas del rotor se han fabricado con ayuda de una impresora 3D, otras, las metálicas, se han tallado en aluminio mediante un torno. Aunque el programa informático que realiza los cálculos aerodinámicos devuelve datos teóricos a cerca del comportamiento del rotor, se ha creído necesario probar el molino mediante ensayos de laboratorio a fin de obtener un resultado más realista.Abstract Given that it’s difficult to imagine any modern society in the future where energy does not play a crucial role, and as many studies have shown that the actual rate of fuel consumption is unsustainable and harmful to life on the planet, it is essential to raise mankind’s awareness that a change in the current trend is not only necessary, but is also imperative. It is not a question of completely eradicating the use of fossil fuels, as in many countries they are the main or even the only way of generating energy, but rather working towards a balance in generation. To do so it is vital to encourage the development of clean energies, increase technological efficiency and reduce consumption. In view of this we have decided to build a small scale wind turbine rotor which can be used as a study tool for engineering students. To design the turbine a software programme was developed based on aerodynamic concepts, which allows us to calculate the geometry of the blades depending on certain initial conditions, estimate the power of the turbine, and obtain performance curves. One of the main issues with wind technology is its high variability, and therefore we implemented a speed regulation system consisting of a mechanism that varies the orientation of the blades and thus allows us to regulate the power of an electric generator attached to the turbine. Current wind powered generators use this type of system to try to smooth out spikes in power that may be caused by gusts of wind. We have used CAD software to design both the turbine itself and the speed regulation system. Most of the turbine parts have been manufactured with the aid of a 3D printer, while the other metallic parts have been turned on made a lathe in aluminum. Although the software programme which calculates the aerodynamics provide us theoretical data about the operation of the rotor. We consider it necessary to test the wind turbine in a lab to obtain more accurate results.

A PESQUISA ACADÊMICA SOBRE COMUNICAÇÃO POPULAR, ALTERNATIVA E COMUNITÁRIA NO BRASIL: análise de dissertações e teses produzidas em Programas de Pós-Graduação em Comunicação entre 1972 - 2012

Mapeamento das dissertações e teses referentes à subárea da comunicação popular, alternativa e comunitária (CPAC) desenvolvidas nos Programas de Pós-Graduação em Comunicação stricto sensu no Brasil, de 1972 a 2012. Dentre os objetivos estão localizar as pesquisas; os autores; sua distribuição no tempo e espaço; identificar as instituições e orientadores que impulsionam a subárea; definir as abordagens teórico-metodológicas; e apontar autores/conceitos referência. Por meio de pesquisa exploratória e aplicação de quatro filtros, chegou-se a uma amostra final de 102 pesquisas, 87 dissertações e 15 teses, submetidas à análise quantitativa, por meio de Análise de Conteúdo a partir de partes pré-definidas (Resumo, Palavras chave, Introdução, Sumário, Considerações Finais e capítulo metodológico, quando presente), e a uma análise qualitativa do conteúdo completo das 15 teses. O método que orienta esta pesquisa é o histórico dialético, na perspectiva da busca de uma análise de conjunto e atenta às contradições e mudanças que o objeto está implicado; e a pesquisa bibliográfica que a fundamenta se ancora em autores como Jorge González, Cicilia Peruzzo, Regina Festa, Pedro Gilberto Gomes, Gilberto Giménez e Augusto Triviños e foi realizada com o apoio do software NVivo. Resultados quantitativos indicam: a) predominância de pesquisas sobre comunicação comunitária (68%) b) predominância de estudos empíricos (79%); c) a variedade de denominações atribuídas às experiências pelos pesquisadores; d) a constante luta das classes populares por democratização da comunicação e por direitos sociais ao longo dos anos; e) a influência e importância dos intelectuais orgânicos nas experiências estudadas, f) problemas metodológicos; g) UMESP, USP e UFRJ como instituições protagonistas, e, h) Cicilia Peruzzo e Raquel Paiva como as que mais orientam teses e dissertações sobre a temática. Quanto à análise qualitativa verificaram-se alguns critérios que permeiam a CPAC: 1) a definição de classes subalternas; 2) a importância da participação ativa das comunidades nos processos de comunicação; e 3) formas, conteúdos e objetivos que se complementam e dão identidade às experiências

O AGENDAMENTO DE TELEJORNAIS BRASILEIROS EM SITES NOTICIOSOS DE CONTEÚDO COLABORATIVO

The thesis investigates if with the free news production, people who post information on collaborative content sites, known as interacting, tend to reproduce information that was scheduled for Tv news. This study is a comparison of the collaborative content vehicles Vc reporter, Vc no G1 and Eu reporter with TV news SBT Brasil, Jornal Nacional, Jornal da Record and Jornal da Band. We sought to determine whether those newscasts guide the collaborative platforms. The hypothesis assumes that Brazilian TV news have been building over time a credible relationship with the viewer, so it is possible to think that the interacting use the same criteria for selecting the broadcasts and reproduce similar information in collaborative content sites. The method used was content analysis, based on the study of Laurence Bardin and the type of research used was quantitative. This research concluded that, within a small portion of the universe surveyed, there are schedules of television news across the collaborative content.

A COMUNICAÇÃO POPULAR NA CONSTRUÇÃO E PRESERVAÇÃO DA MEMÓRIA DAS LUTAS POPULARES NO BRASIL (décadas de 1970 e 1980)

Nas décadas de 1970 e 1980 houve a eclosão de experiências comunicacionais populares, em todo Brasil, com vasta produção de materiais, especialmente arquivados pelos centros de documentação. Em sua maioria, criados e financiados por setores progressistas da Igreja Católica e Protestante. Entre eles, o Centro de Pastoral Vergueiro (CPV) e o Centro de Comunicação e Educação Popular de São Miguel Paulista (CEMI) que também tiveram importante papel na construção e preservação da memória das lutas populares no período de reorganização social, no contexto de distensão da ditadura militar. No entanto, tais acervos estão em iminente risco, por falta de investimento e vontade política. O que seria um prejuízo histórico e científico para movimentos sociais atuais e à pesquisa acadêmica. O objetivo do estudo é identificar a que se deve este desinteresse. A abordagem se dá pelo método da história oral e como técnicas de investigação adotamos a pesquisa bibliográfica, documental e a pesquisa de campo, por meio da entrevista em profundidade. A falta de uma política pública que garanta a preservação dos documentos é sinal de que no Brasil predomina uma cultura que não privilegia a memória, sobretudo das camadas empobrecidas da população. Além do que, a memória pode ser subversiva. Afinal tais documentos expressam a força da participação popular no processo de transformação social e podem despertar novas ações, o que não interessa aos grupos que estão no poder.

Estimating the probability for a protein to have a new fold: A statistical computational model

Structural genomics aims to solve a large number of protein structures that represent the protein space. Currently an exhaustive solution for all structures seems prohibitively expensive, so the challenge is to define a relatively small set of proteins with new, currently unknown folds. This paper presents a method that assigns each protein with a probability of having an unsolved fold. The method makes extensive use of protomap, a sequence-based classification, and scop, a structure-based classification. According to protomap, the protein space encodes the relationship among proteins as a graph whose vertices correspond to 13,354 clusters of proteins. A representative fold for a cluster with at least one solved protein is determined after superposition of all scop (release 1.37) folds onto protomap clusters. Distances within the protomap graph are computed from each representative fold to the neighboring folds. The distribution of these distances is used to create a statistical model for distances among those folds that are already known and those that have yet to be discovered. The distribution of distances for solved/unsolved proteins is significantly different. This difference makes it possible to use Bayes' rule to derive a statistical estimate that any protein has a yet undetermined fold. Proteins that score the highest probability to represent a new fold constitute the target list for structural determination. Our predicted probabilities for unsolved proteins correlate very well with the proportion of new folds among recently solved structures (new scop 1.39 records) that are disjoint from our original training set.

RNA: a method to specifically inhibit PCR amplification of known members of a multigene family by degenerate primers

The polymerase chain reaction (PCR) is a versatile method to amplify specific DNA with oligonucleotide primers. By designing degenerate PCR primers based on amino acid sequences that are highly conserved among all known gene family members, new members of a multigene family can be identified. The inherent weakness of this approach is that the degenerate primers will amplify previously identified, in addition to new, family members. To specifically address this problem, we synthesized a specific RNA for each known family member so that it hybridized to one strand of the template, adjacent to the 3′-end of the primer, allowing the degenerate primer to bind yet preventing extension by DNA polymerase. To test our strategy, we used known members of the soluble, nitric oxide-sensitive guanylyl cyclase family as our templates and degenerate primers that discriminate this family from other guanylyl cyclases. We demonstrate that amplification of known members of this family is effectively and specifically inhibited by the corresponding RNAs, alone or in combination. This robust method can be adapted to any application where multiple PCR products are amplified, as long as the sequence of the desired and the undesired PCR product(s) is sufficiently distinct between the primers.