Effect of adding flours from marolo fruit (Annona crassiflora Mart) and jerivá fruit (Syagrus romanzoffiana Cham Glassm) on the physicals and sensory characteristics of food bars

Abstract The marolo (Annona crassiflora Mart.) and jerivá (Syagrus romanzoffiana Cham Glassm) fruits grow in the Cerrado biome, and have important sensory and nutritional characteristics. These fruits are eaten fresh or processed and embedded in ice cream, candy, juices, and liquors. However, their use is very limited and is localized exclusively to their native region. The aim of this study was to evaluate the use of these fruits in food consumer products to improve the nutritional patterns of consumers and extend knowledge thereof. To do this, different levels (0%, 5%, 10%, 15%, and 20%) of flour derived from the marolo and jerivá fruits were incorporated into food bars, which were then characterized in terms of their physical of the texture (TPA), porosity, color and sensorial properties. The food bars enriched with marolo and jerivá flours had an intense yellow color and increased hardness relative to the control bars; the porosity of the bars progressively decreased as the amount of flour added increased. The sensorial analysis in the snack bars developed added with the fruits flour no was influence by incorporation this component, showed good averages for the scores evaluated.

Simulation and material calibration of ultra high strength steel (UHSS) S960 welded joint under static tensile test utilizing finite element method (FEM)

The aim of this work was to calibrate the material properties including strength and strain values for different material zones of ultra-high strength steel (UHSS) welded joints under monotonic static loading. The UHSS is heat sensitive and softens by heat due to welding, the affected zone is heat affected zone (HAZ). In this regard, cylindrical specimens were cut out from welded joints of Strenx® 960 MC and Strenx® Tube 960 MH, were examined by tensile test. The hardness values of specimens’ cross section were measured. Using correlations between hardness and strength, initial material properties were obtained. The same size specimen with different zones of material same as real specimen were created and defined in finite element method (FEM) software with commercial brand Abaqus 6.14-1. The loading and boundary conditions were defined considering tensile test values. Using initial material properties made of hardness-strength correlations (true stress-strain values) as Abaqus main input, FEM is utilized to simulate the tensile test process. By comparing FEM Abaqus results with measured results of tensile test, initial material properties will be revised and reused as software input to be fully calibrated in such a way that FEM results and tensile test results deviate minimum. Two type of different S960 were used including 960 MC plates, and structural hollow section 960 MH X-joint. The joint is welded by BöhlerTM X96 filler material. In welded joints, typically the following zones appear: Weld (WEL), Heat affected zone (HAZ) coarse grained (HCG) and fine grained (HFG), annealed zone, and base material (BaM). Results showed that: The HAZ zone is softened due to heat input while welding. For all the specimens, the softened zone’s strength is decreased and makes it a weakest zone where fracture happens while loading. Stress concentration of a notched specimen can represent the properties of notched zone. The load-displacement diagram from FEM modeling matches with the experiments by the calibrated material properties by compromising two correlations of hardness and strength.

Weldability of high strength aluminium alloys

The need for reduced intrinsic weight of structures and vehicles in the transportation industry has made aluminium research of interest. Aluminium has properties that are favourable for structural engineering, including good strength-to-weight ratio, corrosion resistance and machinability. It can be easily recycled saving energy used in smelting as compared to steel. Its alloys can have ultimate tensile strength of up to 750 MPa, which is comparable to steel. Aluminium alloys are generally weldable, however welding of high strength alloys like the 7xxx series pose considerable challenges. This paper presents research on the weldability of high strength aluminium alloys, principally the 7xxx series. The weldability with various weld processes including MIG, TIG, and FSW, is discussed in addition to consideration of joint types, weld defects and recommendations for minimizing or preventing weld defects. Experimental research was carried out on 7025-T6 and AW-7020 alloys. Samples were welded, and weld cross sections utilized in weld metallurgy studies. Mechanical tests were carried out including hardness tests and tensile tests. In addition, testing was done for the presence of Al2O3 on exposed aluminium alloy. It was observed that at constant weld heat input using a pulsed MIG system, the welding speed had little or no effect on the weld hardness. However, the grain size increased as the filler wire feed rate, welding current and welding speed increased. High heat input resulted in lower hardness of the weld profile. Weld preheating was detrimental to AW- 7020 welds; however, artificial aging was beneficial. Acceptable welds were attained with pulsed MIG without the removal of the Al2O3 layer prior to welding. The Al2O3 oxide layer was found to have different compositions in different aluminium alloys. These findings contribute useful additional information to the knowledge base of aluminium welding. The application of the findings of this study in welding will help reduce weld cost and improve high strength aluminium structure productivity by removing the need for pre-weld cleaning. Better understanding of aluminium weld metallurgy equips weld engineers with information for better aluminium weld design.

Suurlujuusterästen hitsausliitoksen muutosvyöhykkeen metallurgiset muutokset

Tässä kandidaatintyössä käsitellään suurlujuusteräksiä ja niiden hitsausta, keskittyen varsinkin hitsauksessa perusaineeseen syntyvään muutosvyöhykkeeseen. Työn alkuosio on suoritettu kirjallisuustutkimuksena ja siinä käydään läpi yleisesti suurlujuusterästen määrittelyä, valmistustapoja, hitsausta ja hitsaukseen liittyviä erityisnäkökohtia. Työn loppuosassa on tutustuttu suurlujuusteräksiä hitsattaessa syntyvään muutosvyöhykkeeseen koehitsien avulla. Suurlujuusteräksille ei ole luotu yleistä standardisoitua määrittelyasteikkoa, mutta teräksiä aletaan usein pitämään suurlujuusteräksinä kun niiden myötöraja ylittään 460–550 MPa. Tällaisia teräksiä voidaan valmistaa pääasiassa joko nuorruttamalla, termomekaanisesti valssaamalla tai suorakarkaisemalla. Valmistustavalla on suuri vaikutus teräksen hitsattavuuteen. Nuorrutetuille teräksille hitsattaessa muodostuvan muutosvyöhykkeen karkearakeisen osion raekoko voi kasvaa huomattavasti varsinkin suurempia lämmöntuonteja käytettäessä ja täten aiheuttaa merkittävääkin kovuuden kasvua, kuten myös tämän kandidaatintyön koehitseissä havaittiin. Termomekaanisesti valmistetuilla teräksillä ei vastaavanlaista kovuuden kasvua yleensä ilmene. Valmistustavasta riippumatta suurlujuusterästen mekaaniset ominaisuudet vaikuttaisivat heikentyvän kyseisellä vyöhykkeellä suurempia lämmöntuonteja käytettäessä. Suurlujuusterästen hitsausliitosten laatua pyritäänkin parantamaan jatkuvasti esimerkiksi kehittämällä materiaaleista paremmin hitsattavia ja hitsausprosesseista paremmin suurlujuusteräksien erityistarpeita huomioivia.

Ultralujan teräksen kaarijuotto

Tässä diplomityössä tutkitaan ultralujan rakenneteräksen kaarijuotolla valmistettujen liitosten väsymiskestävyyttä. Tutkittavat liitokset ovat kuormaa kantamattomia X-liitoksia. Tutkinnassa vertaillaan puhtaasti juottamalla valmistettua liitosta hitsauksen ja juoton kombinaatioliitokseen, jossa pohjapalkona toimivan hitsin rajaviivalle on juotettu lisäpalko. Kaarijuottoa esitellään yleisesti liittämismenetelmänä. Ultralujaa rakenneterästä esitellään yleisesti ja tarkastellaan sen metallurgista käyttäytymistä sekä juotettaessa, että hitsattaessa. Tutkimuksessa tehtiin kaikkiaan 21 väsytystestiä. Väsytystestit muodostuivat kolmesta eri koekappalesarjasta. Ensimmäisen ja toisen sarjan koekappaleet tehtiin juottamalla, eri lisäaineilla. 3. sarjassa pienat hitsattiin, jonka jälkeen hitsin rajaviivalle tehtiin juotto. Kappaleiden geometriat mitattiin ennen testejä, ja osasta kappaleista mitattiin jäännösjännitykset. Kappaleista otettiin hieitä, joista tehtiin kovuusmittaukset ja suoritettiin makro- ja mikrotason tarkastelua liitosprosessin lämmöntuonnin vaikutuksesta. Väsytyskokeiden perusteella kappaleille määritettiin nimelliset ja rakenteelliset väsymisluokat. Tuloksista piirrettiin S-N –käyrät. Liitoksista tehtiin FEA-mallit, joista määritettiin liitoksen rajaviivalle muodostuva jännitys ja 2. sarjan koekappaleiden laskennalliset kestoiät. 1. sarjan juotoksissa oli ongelmana juotoksen tarttuvuus teräksen pintaan. 2. sarjan koetulokset olivat kaikkein parhaita. 3. sarjan kombinaatioliitokset ylsivät kohtalaisiin väsymisluokkiin. 2. sarjan koetulosten perusteella kaarijuotossa on potentiaalia ultralujan rakenneteräksen liittämismenetelmänä. Jatkotutkimuksen tarve on kuitenkin laaja. Tämä työ osoitti, että kaarijuottaminen voi olla vaativa liittämisprosessi, sillä toimiakseen se vaatii varsin tarkat parametrit, ja lisäksi prosessi on melko herkkä olosuhdemuutoksille.

The crystal and molecular structure of 18-Crown-6 HgC12 and 18-Crown-6 Cdc12

Hg(18-Crown-6)C12 and Cd(18-Crown-6)C12 are isostructura1, space group Cl~ Z = 2. For the mercury compound, a = 10.444(2) A° , b = 11. 468(1) A° , c = 7.754(1) A° , a = 90.06(1)°, B = 82.20(1)°, Y = 90.07(1)°, Dobs = 1.87, Dca1c = 1.93, V = 920.05 13, R = 4.66%. For the cadmium compound, 000 a = 10.374(1) A, b = 11.419(2) A, c = 7.729(1) A, a = 89.95(1)°, B = 81.86(2)°, Y = 89.99(1)°, Dobs = 1.61, Dcalc = 1.64, V = 906.4613, R = 3.95%. The mercury and cadmium ions exhibit hexagonal bipyramidal coordination, with the metal ion located on a centre of symmetry in the plane of the oxygen atoms. The main differences between the two structures are an increase in the metal-oxygen distance and a reduction in the metalchloride distance when the central ion changes from Cd2+ to Hg2+. These differences may be explained in terms of the differences in hardness or softness of the metal ions and the donor atoms.

La réceptivité chez les adolescents agresseurs sexuels participant à une intervention de groupe basé sur la prévention de la récidive

Rapport de stage présenté à la Faculté des études supérieures en vue de l’obtention de la Maîtrise (M.Sc.) en criminologie

Parallelization of SAT on Reconfigurable Hardware

Quoique très difficile à résoudre, le problème de satisfiabilité Booléenne (SAT) est fréquemment utilisé lors de la modélisation d’applications industrielles. À cet effet, les deux dernières décennies ont vu une progression fulgurante des outils conçus pour trouver des solutions à ce problème NP-complet. Deux grandes avenues générales ont été explorées afin de produire ces outils, notamment l’approche logicielle et matérielle. Afin de raffiner et améliorer ces solveurs, de nombreuses techniques et heuristiques ont été proposées par la communauté de recherche. Le but final de ces outils a été de résoudre des problèmes de taille industrielle, ce qui a été plus ou moins accompli par les solveurs de nature logicielle. Initialement, le but de l’utilisation du matériel reconfigurable a été de produire des solveurs pouvant trouver des solutions plus rapidement que leurs homologues logiciels. Cependant, le niveau de sophistication de ces derniers a augmenté de telle manière qu’ils restent le meilleur choix pour résoudre SAT. Toutefois, les solveurs modernes logiciels n’arrivent toujours pas a trouver des solutions de manière efficace à certaines instances SAT. Le but principal de ce mémoire est d’explorer la résolution du problème SAT dans le contexte du matériel reconfigurable en vue de caractériser les ingrédients nécessaires d’un solveur SAT efficace qui puise sa puissance de calcul dans le parallélisme conféré par une plateforme FPGA. Le prototype parallèle implémenté dans ce travail est capable de se mesurer, en termes de vitesse d’exécution à d’autres solveurs (matériels et logiciels), et ce sans utiliser aucune heuristique. Nous montrons donc que notre approche matérielle présente une option prometteuse vers la résolution d’instances industrielles larges qui sont difficilement abordées par une approche logicielle.

Caractérisation des nanoparticules polymériques par la technique d'ultracentrifugation analytique

L’utilisation de nanoparticules (NPs) dans divers domaines industriels est de plus en plus fréquente ce qui génère leur propagation dans l’environnement. Selon leur persistance, mobilité, bioaccumulation et toxicité, des risques inconnus pour la santé et pour des écosystèmes peuvent en résulter. En effet, la caractérisation et la quantification sont des défis analytiques très complexes en raison de la nature dynamique (petite taille, grande réactivité et instabilité) des nanomatériaux. L'objectif de cette étude est donc de caractériser par ultracentrifugation analytique (AUC) des nanoparticules polymériques (Allosperse® dites allosphères) qui sont destinées à des fins agricoles. Pour y parvenir, différentes NPs métalliques (argent, quantum dot), oxydes métalliques (dioxyde de titane, oxyde de zinc) et NPs de polystyrène ont d’abord été mesurés par AUC à l’aide des différents systèmes de détection (absorbance, fluorescence et interférence). Dans le cas des allosphères, un grand nombre d'essais préliminaires ont été réalisés afin d'optimiser la vitesse d'ultracentrifugation, le temps d'ultracentrifugation, le nombre de numérisations et la concentration de l'échantillon. Un protocole optimisé a été utilisé pour la détermination du diamètre hydrodynamique (dh) des NPs. Les différentes analyses qui ont été réalisées dans cette étude révèlent que l’AUC permet de déterminer la taille de très petites NPs. Par ailleurs, une étude du comportement de ces allosphères pour des pH entre 4-8, des forces ioniques de 0 à 500 mM, en présence ou absence de matière organique naturelle a été entreprise. Les travaux ont montré que le dH était d’environ 7,0 nm avec de petites augmentations à faible pH, ou à très grande force ionique ou dureté. Ces résultats indiquent la grande stabilité physique et chimique des allosphères qui auront, ainsi, une grande mobilité dans les sols. La diffusion de lumière dynamique et la spectroscopie de corrélation de fluorescence ont été utilisées afin de valider les résultats obtenus par l’AUC.

Drilling for Papers in INKE

In this article, we discuss the first year research plan for the INKE interface design team, which focuses on a prototype for chaining. Interpretable as a subclass of Unsworths scholarly primitive of discovering, chaining is the process of beginning with an exemplary article, then finding the articles that it cites, the articles they cite, and so on until the reader begins to get a feel for the terrain. The chaining strategy is of particular utility for scholars working in new areas, either through doing background work for interdisciplinary interests or else by pursuing a subtopic in a domain that generates a paper storm of publications every year. In our prototype project, we plan to produce a system that accepts a seed article, tunnels through a number of levels of citation, and generates a summary report listing the most frequent authors and articles. One of the innovative features of this prototype is its use of the experimental oil and water interface effect, which uses text animation to provide the user with a sense of the underlying process.

Studies on Conductive Silicone Rubber Compounds

ABSTRACT: The electrical conductivity of silicone rubber vulcanizates containing carbon blacks [e.g., acetylene black, lamp black, and ISAF (N-234) black] were investigated. The change in electrical conductivity with varying amounts of carbon blacks and the temperature dependence was measured. The mechanical properties like tensile strength, tear strength, elongation at break, hardness, etc., of the vulcanizates were determined. A comparative study of the electrical conductivity of the composites revealed that the electrical conductivity of the composites made with acetylene black was higher than that of the composites made of other blacks.

Studies on Latex Stage Carbon Black Masterbatching of NR and its Blend with SBR

Carbon Black is incorporated In natural rubber latex in , the presence of polyethylene glycol. The dispersion of carbon blade in the vulcanizatea is analyzed using polaroid M.4 land camera The mechanical properties of the carbon black meeterbatched NR/SBR blend Is compared with that of conventional NR/SBR blend before and after ageing , The resilience, flex resistance and hardness are found to be superior for N-LCMISBR compounds. The compression set and abrasion resistance are comparable for both types of blends . The processebiity and die swell of these blends at different shear rates are also compared.

A Study on the Use of Coconut Oil as Plasticiser in Natural Rubber Compounds

Mechanical properties and thermal degradation characteristics of natural rubber compounds captaining coconut oil were compared with that of a control compound containing naphthenic oil. Cure time was marginally lower in the case of coconut oil mixes, probably due to the presence of free fatty acids. Tensile strength , tear strength, resilience and abrasion resistance were better than the naphthenic oil-based compounds . Compression set and hardness were marginally inferior The coconut oil mixes had a crosslink density comparable to that of the reference compound. Thermal studies showed that the temperature of initiation of degradation was increased by 10°C and the temperature at which the peak rate of degradation occured was increased by 7°C. The peak rate of degradation was compa rable to the control compound.

Salinity Intrusion and Seasonal Water Quality Variations in the Tidal Canals of Cochin

The study conducted on the salinity intrusion and seasonal water quality variations in the tidal canals of cochin. The main objectives are, salinity intrusion profile, water quality variation of the surface water of the canals,hierarchical utility of the water bodies and to understand the non-conservative components in the water body. The parameters monitored werepH,temperature,alkalinity,conductivity,DO(dissolvedoxygen),COD(chemical oxygen demand),BOD(biochemical oxygen demand0,chloride, total hardness, calcium hardness, dissolved phosphate, nitrate, total iron, sulphate, turbidity, total coliform and SUVA at 254nm. The tidal canals of GCDA were found to be creeks extending to the interior, canals inter connecting parts of the estuary or canals with seasonally broken segments. Based on utility the canals could be classified as: canals heavely polluted and very saline,canals polluted by urban waste , canals having fresh water for most part of the year and not much polluted, fresh water bodies heavily polluted. During the rainy months carbon fixation by plankton is nonexistent,and during the dry months Chitrapuzha becomes a sink of phosphate. The study indicated abiotic subrouts for dissolved phosphate and revealed the potential pitfalls in LOICZ modeling exercise on sewage ladentidal canals. It was also found that all canals except for the canals of West cochin and chittoorpuzha have fresh water for some part of the year. The water quality index in the durable fresh water stretches was found to be of below average category.

Thermal characterization of doped polyaniline and its composites with CoPc

Thermal diffusivity of the composites of camphor sulphonic acid (CSA) doped polyaniline (PANI) and its composites with cobalt phthalocyanine (CoPc) has been measured using open cell photoacoustic technique. Analysis of the data shows that the effective thermal diffusivity value can be tuned by varying the relative volume fraction of the constituents. It is seen that polaron assisted heat transfer mechanism is dominant in CSA doped PANI and these composites exhibit a thermal diffusivity value which is intermediate to that of CSA doped PANI and CoPc. The results obtained are correlated with the electrical conductivity and hardness measurements carried out on the samples