AuxAg1-x alloy seeds: A way to control growth, morphology and defect formation in Ge nanowires

Germanium (Ge) nanowires are of current research interest for high speed nanoelectronic devices due to the lower band gap and high carrier mobility compatible with high K-dielectrics and larger excitonic Bohr radius ensuing a more pronounced quantum confinement effect [1-6]. A general way for the growth of Ge nanowires is to use liquid or a solid growth promoters in a bottom-up approach which allow control of the aspect ratio, diameter, and structure of 1D crystals via external parameters, such as precursor feedstock, temperature, operating pressure, precursor flow rate etc [3, 7-11]. The Solid-phase seeding is preferred for more control processing of the nanomaterials and potential suppression of the unintentional incorporation of high dopant concentrations in semiconductor nanowires and unrequired compositional tailing of the seed-nanowire interface [2, 5, 9, 12]. There are therefore distinct features of the solid phase seeding mechanism that potentially offer opportunities for the controlled processing of nanomaterials with new physical properties. A superior control over the growth kinetics of nanowires could be achieved by controlling the inherent growth constraints instead of external parameters which always account for instrumental inaccuracy. The high dopant concentrations in semiconductor nanowires can result from unintentional incorporation of atoms from the metal seed material, as described for the Al catalyzed VLS growth of Si nanowires [13] which can in turn be depressed by solid-phase seeding. In addition, the creation of very sharp interfaces between group IV semiconductor segments has been achieved by solid seeds [14], whereas the traditionally used liquid Au particles often leads to compositional tailing of the interface [15] . Korgel et al. also described the superior size retention of metal seeds in a SFSS nanowire growth process, when compared to a SFLS process using Au colloids [12]. Here in this work we have used silver and alloy seed particle with different compositions to manipulate the growth of nanowires in sub-eutectic regime. The solid seeding approach also gives an opportunity to influence the crystallinity of the nanowires independent of the substrate. Taking advantage of the readily formation of stacking faults in metal nanoparticles, lamellar twins in nanowires could be formed.

Sedimentology of a Middle Jurassic Base-of-Slope environment, Cutri Formation, Mallorca

The Cutri Formation’s, type location, exposed in the NW of Mallorca, Spain has previously been described by Álvaro et al., (1989) and further interpreted by Abbots (1989) unpublished PhD thesis as a base-of-slope carbonate apron. Incorporating new field and laboratory analysis this paper enhances this interpretation. From this analysis, it can be shown without reasonable doubt that the Cutri Formation was deposited in a carbonate base-of-slope environment on the palaeowindward side of a Mid-Jurassic Tethyan platform. Key evidence such as laterally extensive exposures, abundant deposits of calciturbidtes and debris flows amongst hemipelagic deposits strongly support this interpretation.

Monosyllabic Circumflexion in Lithuanian

This PhD thesis examines a phenomenon known as Monosyllabic Circumflexion (MC, hereafter) from a historical linguistics / phonological point of view. MC denotes a Lithuanian or Balto-Slavic phenomenon according to which long vowels and diphthongs in monosyllabic words exhibit a circumflex tone instead of the expected acute tone.  It is observed in the following four categories: I. 3rd person future forms of monosyllabic stems (e.g., šõks ― šókti `to jump;' vy͂s ― výti `to drive') II. reflexes of PIE root nouns (e.g., Latv. gùovs `cow;' Lith. šuõ `dog') III. prepositions/adverbs (e.g., nuõ `from' ~  nùotaka `bride;' vė͂l `again' ~ Latv. vêl `still, yet,' tė͂ (permissive particle) < *teh1) IV. pronominal forms (e.g., tuõ ~ gerúoju `the good (m.~sg.~instr.),' tie͂ ~ tíeji `id. (pl.nom)'). The unexpected circumflex tone in these categories is problematic and important for the solution of a Balto-Slavic accentological question on the etymological background of acute and non-acute tones. The aim of this thesis is to partially contribute to the solution of this problem by establishing the existence of MC and its relative chronology. The first category, the 3rd person future forms, provides a substantial number of examples and counterexamples. The examination of them has revealed the fact that the counterexamples constitute a morpho-semantic group of verbs whose future stems underwent considerable morphological changes in the prehistory, hence not exhibiting MC. This shows that the regular tonal reflex of the 3rd person future forms of monosyllabic acute stem must be circumflex, allowing for the establishment of MC as a regular phonological process, although this category does not provide much information on the relative chronology of MC. The second category, the reflexes of Proto-Indo-European root nouns, gives an important clue as to where MC is located in the relative chronology of Balto-Slavic sound changes. Next, there is a discussion of whether the results of the examinations of the first two categories can be maintained for the data of the third and fourth categories, which show an irregular distribution of the acute and circumflex tones in monosyllabic forms. It is shown that various morphological factors, such as homonymic clashes within the paradigms for pronouns, can explain why some monosyllabic forms have acute tone. Also, the linguistic feature of West Aukštaitian dialects of Lithuanian that tend to preserve the results of MC is revealed. These dialects are known to have played an important role in the formation of standard Lithuanian. In this way, the monosyllabic forms with unexpected circumflex tone in Lithuanian are explained as a combination of MC in the Proto-Balto-Slavic time and the dialectal tendency of West Aukštaitian dialects of Lithuanian.

The Pair-Bond Formation and Its Role in the Stimulation of Reproductive Function in Female Common Marmosets (Callithrix jacchus)

SILVA, H.P.A.; SOUSA, M.B.C. The pair-bond formation and its role in the stimulation of reproductive function in female common marmosets (collithrix Jacchus). International Journal of Primatology, v, 18, n.3, p.387-400, 1997.

Supervisão colaborativa para uma educação inclusiva : um estudo com professores do ensino regular

Este trabalho, desenvolvido por uma professora de educação especial no contexto onde exerce funções, resultou da vontade de aprofundar o conhecimento sobre as dinâmicas de trabalho entre os professores do Ensino Regular e entre estes e o professor de Educação Especial. Desta forma elaborámos um projeto de investigação com o propósito de aprofundar o conhecimento sobre estas dinâmicas, no âmbito de uma oficina de formação, dinamizada pela investigadora, realizada no contexto de trabalho dos participantes. Neste âmbito, foi proporcionado um conjunto de experiências vivenciadas em conjunto, procurando contribuir para novas perspetivas teóricas sobre o conhecimento, bem como o envolvimento dos participantes em situações empíricas que lhes permitissem aplicar esses conhecimentos na resolução de problemas concretos emergentes no seu contexto de trabalho. A estratégia formativa baseou-se na colaboração como factor de desenvolvimento e de aprendizagem, surgindo como relevante e necessário o envolvimento dos formandos em processos de investigação da própria prática. A formação, na modalidade de Oficina, foi promovida através do Centro de Formação da Instituição onde a escola, um estabelecimento de ensino particular e cooperativo, se integra. Neste âmbito foi acreditada pelo Conselho Científico-Pedagógico da Formação Contínua e envolveu dezasseis professores do 1.º, 2.º e 3.º ciclos do ensino básico. A formação desenvolveuse em duas fases - a primeira fase, constituída por 4 sessões, teve lugar entre maio e julho de 2011, e a segunda fase, igualmente constituída por 4 sessões, teve lugar de setembro a novembro de 2011, num total de 25 horas presenciais e 25 horas não presenciais. Trata-se de um estudo com uma dupla intencionalidade – formativa e investigativa – no qual se procura compreender (i) a relação entre as estratégias de formação e supervisão promovidas pela professora de educação especial e o desenvolvimento de dinâmicas de trabalho colaborativo entre os participantes (ii) e o impacto dessas dinâmicas no desenvolvimento profissional e nas suas práticas, tendo em vista a promoção de uma educação inclusiva. Configura-se como estudo de caso, na variante de multicaso apresentando, ainda, algumas características de investigação-ação. No âmbito deste estudo, utilizámos um conjunto diverso e complementar de procedimentos investigativos, nomeadamente, o inquérito por questionário aplicado a todos os participantes no início e no fim da oficina de formação; o inquérito por questionário de avaliação das sessões, tendo por base os objetivos do estudo; a entrevista semi-estruturada, realizada a quatro docentes do 1º CEB que constituem os subcasos e o portfolio reflexivo individual dos mesmos, os quais se constituem como estratégia de formação e de investigação. Recorreu-se, ainda, como fontes de informação secundária, ao Teaching portfolio do investigador, às videogravações das sessões de formação, aos registos em vídeo de alguns episódios relativos à intervenção dos formandos em sala de aula e aos projetos de investigação-ação, bem como aos dados recolhidos na entrevista dirigida ao Diretor do estabelecimento de educação e ensino, depois de concluído o programa de formação. Os resultados da análise parecem evidenciar a existência de dinâmicas colaborativas e um clima de inter-ajuda que caraterizou a interação ocorrida na formação, em torno de casos concretos, os quais tiveram um impacto significativo sobre o pensamento e a prática dos participantes. Todo o processo desenvolvido parece ter dado lugar à partilha de saberes e à procura conjunta de soluções para os problemas, tendo contribuído para que os professores passassem a ser mais interventivos, evidenciando novas aprendizagens e uma maior consciencialização do conceito de educação para todos e do que esta implica. Os resultados parecem ainda revelar o desenvolvimento de uma parceria estratégica entre os professores do ensino regular e a professora de educação especial, a qual passou a ser aceite como uma pessoa que pode ajudar a encontrar soluções para os problemas que surgem na sala de aula, de forma a garantir a inclusão de todos os alunos e não apenas dos que têm necessidades educativas especiais.

Functional alkali tantalate 2D structures for microelectronics and related applications

Alkali tantalates and niobates, including K(Ta / Nb)O3, Li(Ta / Nb)O3 and Na(Ta / Nb)O3, are a very promising ferroic family of lead-free compounds with perovskite-like structures. Their versatile properties make them potentially interesting for current and future application in microelectronics, photocatalysis, energy and biomedics. Among them potassium tantalate, KTaO3 (KTO), has been raising interest as an alternative for the well-known strontium titanate, SrTiO3 (STO). KTO is a perovskite oxide with a quantum paraelectric behaviour when electrically stimulated and a highly polarizable lattice, giving opportunity to tailor its properties via external or internal stimuli. However problems related with the fabrication of either bulk or 2D nanostructures makes KTO not yet a viable alternative to STO. Within this context and to contribute scientifically to the leverage tantalate based compounds applications, the main goals of this thesis are: i) to produce and characterise thin films of alkali tantalates by chemical solution deposition on rigid Si based substrates, at reduced temperatures to be compatible with Si technology, ii) to fulfil scientific knowledge gaps in these relevant functional materials related to their energetics and ii) to exploit alternative applications for alkali tantalates, as photocatalysis. In what concerns the synthesis attention was given to the understanding of the phase formation in potassium tantalate synthesized via distinct routes, to control the crystallization of desired perovskite structure and to avoid low temperature pyrochlore or K-deficient phases. The phase formation process in alkali tantalates is far from being deeply analysed, as in the case of Pb-containing perovskites, therefore the work was initially focused on the process-phase relationship to identify the driving forces responsible to regulate the synthesis. Comparison of phase formation paths in conventional solid-state reaction and sol-gel method was conducted. The structural analyses revealed that intermediate pyrochlore K2Ta2O6 structure is not formed at any stage of the reaction using conventional solid-state reaction. On the other hand in the solution based processes, as alkoxide-based route, the crystallization of the perovskite occurs through the intermediate pyrochlore phase; at low temperatures pyrochlore is dominant and it is transformed to perovskite at >800 °C. The kinetic analysis carried out by using Johnson-MehlAvrami-Kolmogorow model and quantitative X-ray diffraction (XRD) demonstrated that in sol-gel derived powders the crystallization occurs in two stages: i) at early stage of the reaction dominated by primary nucleation, the mechanism is phase-boundary controlled, and ii) at the second stage the low value of Avrami exponent, n ~ 0.3, does not follow any reported category, thus not permitting an easy identification of the mechanism. Then, in collaboration with Prof. Alexandra Navrotsky group from the University of California at Davis (USA), thermodynamic studies were conducted, using high temperature oxide melt solution calorimetry. The enthalpies of formation of three structures: pyrochlore, perovskite and tetragonal tungsten bronze K6Ta10.8O30 (TTB) were calculated. The enthalpies of formation from corresponding oxides, ∆Hfox, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -203.63 ± 2.84 kJ/mol, - 358.02 ± 3.74 kJ/mol, and -1252.34 ± 10.10 kJ/mol, respectively, whereas from elements, ∆Hfel, for KTaO3, KTa2.2O6 and K6Ta10.8O30 are -1408.96 ± 3.73 kJ/mol, -2790.82 ± 6.06 kJ/mol, and -13393.04 ± 31.15 kJ/mol, respectively. The possible decomposition reactions of K-deficient KTa2.2O6 pyrochlore to KTaO3 perovskite and Ta2O5 (reaction 1) or to TTB K6Ta10.8O30 and Ta2O5 (reaction 2) were proposed, and the enthalpies were calculated to be 308.79 ± 4.41 kJ/mol and 895.79 ± 8.64 kJ/mol for reaction 1 and reaction 2, respectively. The reactions are strongly endothermic, indicating that these decompositions are energetically unfavourable, since it is unlikely that any entropy term could override such a large positive enthalpy. The energetic studies prove that pyrochlore is energetically more stable phase than perovskite at low temperature. Thus, the local order of the amorphous precipitates drives the crystallization into the most favourable structure that is the pyrochlore one with similar local organization; the distance between nearest neighbours in the amorphous or short-range ordered phase is very close to that in pyrochlore. Taking into account the stoichiometric deviation in KTO system, the selection of the most appropriate fabrication / deposition technique in thin films technology is a key issue, especially concerning complex ferroelectric oxides. Chemical solution deposition has been widely reported as a processing method to growth KTO thin films, but classical alkoxide route allows to crystallize perovskite phase at temperatures >800 °C, while the temperature endurance of platinized Si wafers is ~700 °C. Therefore, alternative diol-based routes, with distinct potassium carboxylate precursors, was developed aiming to stabilize the precursor solution, to avoid using toxic solvents and to decrease the crystallization temperature of the perovskite phase. Studies on powders revealed that in the case of KTOac (solution based on potassium acetate), a mixture of perovskite and pyrochlore phases is detected at temperature as low as 450 °C, and gradual transformation into monophasic perovskite structure occurs as temperature increases up to 750 °C, however the desired monophasic KTaO3 perovskite phase is not achieved. In the case of KTOacac (solution with potassium acetylacetonate), a broad peak is detected at temperatures <650 °C, characteristic of amorphous structures, while at higher temperatures diffraction lines from pyrochlore and perovskite phases are visible and a monophasic perovskite KTaO3 is formed at >700 °C. Infrared analysis indicated that the differences are due to a strong deformation of the carbonate-based structures upon heating. A series of thin films of alkali tantalates were spin-coated onto Si-based substrates using diol-based routes. Interestingly, monophasic perovskite KTaO3 films deposited using KTOacac solution were obtained at temperature as low as 650 °C; films were annealed in rapid thermal furnace in oxygen atmosphere for 5 min with heating rate 30 °C/sec. Other compositions of the tantalum based system as LiTaO3 (LTO) and NaTaO3 (NTO), were successfully derived as well, onto Si substrates at 650 °C as well. The ferroelectric character of LTO at room temperature was proved. Some of dielectric properties of KTO could not be measured in parallel capacitor configuration due to either substrate-film or filmelectrode interfaces. Thus, further studies have to be conducted to overcome this issue. Application-oriented studies have also been conducted; two case studies: i) photocatalytic activity of alkali tantalates and niobates for decomposition of pollutant, and ii) bioactivity of alkali tantalate ferroelectric films as functional coatings for bone regeneration. Much attention has been recently paid to develop new type of photocatalytic materials, and tantalum and niobium oxide based compositions have demonstrated to be active photocatalysts for water splitting due to high potential of the conduction bands. Thus, various powders of alkali tantalates and niobates families were tested as catalysts for methylene blue degradation. Results showed promising activities for some of the tested compounds, and KNbO3 is the most active among them, reaching over 50 % degradation of the dye after 7 h under UVA exposure. However further modifications of powders can improve the performance. In the context of bone regeneration, it is important to have platforms that with appropriate stimuli can support the attachment and direct the growth, proliferation and differentiation of the cells. In lieu of this here we exploited an alternative strategy for bone implants or repairs, based on charged mediating signals for bone regeneration. This strategy includes coating metallic 316L-type stainless steel (316L-SST) substrates with charged, functionalized via electrical charging or UV-light irradiation, ferroelectric LiTaO3 layers. It was demonstrated that the formation of surface calcium phosphates and protein adsorption is considerably enhanced for 316L-SST functionalized ferroelectric coatings. Our approach can be viewed as a set of guidelines for the development of platforms electrically functionalized that can stimulate tissue regeneration promoting direct integration of the implant in the host tissue by bone ingrowth and, hence contributing ultimately to reduce implant failure.

The Pair-Bond Formation and Its Role in the Stimulation of Reproductive Function in Female Common Marmosets (Callithrix jacchus)

SILVA, H.P.A.; SOUSA, M.B.C. The pair-bond formation and its role in the stimulation of reproductive function in female common marmosets (collithrix Jacchus). International Journal of Primatology, v, 18, n.3, p.387-400, 1997.

FUNCTIONAL CHARACTERIZATION OF THE LINK BETWEEN CARBOHYDRATE METABOLISM AND THE PATHOGENESIS OF THE INVASIVE M1T1 GROUP A STREPTOCOCCUS

The Group A Streptococcus (GAS), or Streptococcus pyogenes, is a strict human pathogen that colonizes a variety of sites within the host. Infections can vary from minor and easily treatable, to life-threatening, invasive forms of disease. In order to adapt to niches, GAS utilizes environmental cues, such as carbohydrates, to coordinate the expression of virulence factors. Research efforts to date have focused on identifying how either components of the phosphoenolpyruvate-phosphotransferase system (PTS) or global transcriptional networks affect the regulation of virulence factors, but not the synergistic relationship between the two. The present study investigates the role of a putative PTS-fructose operon encoded by fruRBA and its role in virulence in the M1T1 strain 5448. Growth in fructose resulted in induction of fruRBA. RT-PCR showed that fruRBA formed an operon, which was repressed by FruR in the absence of fructose. Growth and carbon utilization profiles revealed that although the entire fruRBA operon was required for growth in fructose, FruA was the main fructose transporter. The ability of both ΔfruR and ΔfruB mutants to survive in whole human blood or neutrophils was impaired. However, the phenotypes were not reproduced in murine whole blood or in a mouse intraperitoneal infection, indicating a human-specific mechanism. While it is known that the PTS can affect activity of the Mga virulence regulator, further characterization of the mechanism by which sugars and its protein domains affect activity have not been studied. Transcriptional studies revealed that the core Mga regulon is activated more in a glucose-rich than a glucose-poor environment. This activation correlates with the differential phosphorylation of Mga at its PTS regulatory domains (PRDs). Using a 5448 mga mutant, transcriptome studies in THY or C media established that the Mga regulon reflects the media used. Interestingly, Mga regulates phage-encoded DNases in a low glucose environment. We also show that Mga activity is dependent on C-terminal amino acid interactions that aid in the formation of homodimers. Overall, the studies presented sought to define how external environmental cues, specifically carbohydrates, control complex regulatory networks used by GAS, contribute to pathogenesis, and aid in adaptation to various nutrient conditions encountered.

THE PHYSICS OF IDEAS: INFERRING THE MECHANICS OF OPINION FORMATION FROM MACROSCOPIC STATISTICAL PATTERNS

In a microscopic setting, humans behave in rich and unexpected ways. In a macroscopic setting, however, distinctive patterns of group behavior emerge, leading statistical physicists to search for an underlying mechanism. The aim of this dissertation is to analyze the macroscopic patterns of competing ideas in order to discern the mechanics of how group opinions form at the microscopic level. First, we explore the competition of answers in online Q&A (question and answer) boards. We find that a simple individual-level model can capture important features of user behavior, especially as the number of answers to a question grows. Our model further suggests that the wisdom of crowds may be constrained by information overload, in which users are unable to thoroughly evaluate each answer and therefore tend to use heuristics to pick what they believe is the best answer. Next, we explore models of opinion spread among voters to explain observed universal statistical patterns such as rescaled vote distributions and logarithmic vote correlations. We introduce a simple model that can explain both properties, as well as why it takes so long for large groups to reach consensus. An important feature of the model that facilitates agreement with data is that individuals become more stubborn (unwilling to change their opinion) over time. Finally, we explore potential underlying mechanisms for opinion formation in juries, by comparing data to various types of models. We find that different null hypotheses in which jurors do not interact when reaching a decision are in strong disagreement with data compared to a simple interaction model. These findings provide conceptual and mechanistic support for previous work that has found mutual influence can play a large role in group decisions. In addition, by matching our models to data, we are able to infer the time scales over which individuals change their opinions for different jury contexts. We find that these values increase as a function of the trial time, suggesting that jurors and judicial panels exhibit a kind of stubbornness similar to what we include in our model of voting behavior.

Leadership training and regular communication identified as key strategies for the development of the Australian pineapple industry

Changes in the circumstances of the Australian pineapple industry left growers with a leadership vacuum, limited technical support and no funds for conducting research and marketing. Inspirational leadership training together with regular district farm meetings were used to assist the Australian pineapple industry to successfully adapt to these challenges. All growers were assigned to one of a number of regional grower study groups and regular on-farm meetings commenced to facilitate communication between growers, transfer of technology, awareness of industry affairs and an opportunity to become involved in industry business. A leader was appointed within each study group and these leaders attended a leadership course consisting of three, three-day modules. These original course graduates formed the nucleus of a new grower representative group which subsequently instigated levies to fund research and marketing. Two more courses have since been conducted to provide the depth of leadership to satisfy the growers' desire to rotate industry leadership on a regular basis.

L'évaluation de l'autonomie fonctionnelle des personnes âgées : contribution de la didactique professionnelle à la formation des travailleuses et travailleurs sociaux au Québec

Résumé : Le vieillissement démographique est statistiquement indiscutable au Québec. Ce singulier trompeur masque les différentes manières de vieillir. Pour ceux qui ne parviennent pas à vieillir en santé, les solidarités familiales, comme les solidarités institutionnelles, c’est à dire publiques viennent en principe compenser ce qu’il est convenu de désigner de perte d’autonomie. Les politiques de santé publique au Québec organisent les services de soutien à domicile sous condition d’avoir estimé la situation de la personne avec l’outil d’évaluation multiclientèle (OEMC). Il est en usage dans l’ensemble du réseau de la santé et des services sociaux, et utilisé par les professionnels dont les travailleuses et les travailleurs sociaux (TS). Or, la gérontologie est peu soutenue dans la formation initiale des TS. Nous nous sommes interrogée sur les savoirs mobilisés par les TS quand ils évaluent. S’agissant des savoirs inscrits dans la pratique, nous avons orienté la recherche dans les théories de l’activité, la didactique professionnelle et le cadre conceptuel de la médiation. Nous avons étudié l’activité de professionnels en travail social expérimentés afin d’identifier certains des savoirs mobilisés pour les rendre disponibles à la formation des étudiant (e)s en travail social au Québec. Cent-cinquante heures d’observations et vingt-deux entretiens individuels et collectifs ont été réalisés avec des intervenants volontaires du service de soutien à domicile. Les résultats préliminaires de la recherche ont été présentés lors de groupes de discussion avec les TS ayant participé à la recherche, puis avec des enseignants en travail social. Nos résultats permettent de décrire les procédures de l’évaluation dans l’organisation du service d’aide à domicile et d’en différencier le processus de l’activité par laquelle le TS évalue l’autonomie fonctionnelle de la personne. Nous constatons que les savoirs mobilisés par les TS reposent premièrement sur une connaissance fine du territoire, de l’outil d’évaluation et des institutions. Un deuxième registre de savoir concerne la conceptualisation de l’autonomie fonctionnelle par l’outil OEMC comme objet et domaine d’intervention des TS. Enfin, un troisième registre se réfère aux savoirs mobilisés pour entrer en relation avec les personnes âgées, avec leur entourage. Or, ces trois registres de savoir n’apparaissent pas dans le discours des TS et résultent de notre propre analyse sur leur pratique. L’évaluation de l’autonomie fonctionnelle analysée par le concept de médiation est révélatrice du rapport aux savoirs du TS. S’agissant de savoirs de la pratique, nous constatons que leur classification entre les catégories usuelles de savoirs théoriques ou pratiques était inopérante. Nous empruntons le vocabulaire de la didactique professionnelle : celui des invariants opératoires reliés à l’autonomie fonctionnelle et celui des schèmes d’activité reliés à l’activité d’évaluation. C’est ainsi que nous avons identifié deux moments dans l’évaluation. Le premier assemble la collecte des informations et l’analyse des données. L’autonomie fonctionnelle se décline dans des conditions d’existence de la personne sur l’axe allant de la mobilité à la cognition avec comme balises d’intervention la sécurité et l’intégrité de la personne. Dans ce processus itératif, le TS identifie avec la personne ce qui nuit à son quotidien. L’évaluation formule comment résoudre cette incidence, comment la perte d’autonomie pourrait être compensée. La collecte d’information et le raisonnement du TS est alors un mouvement itératif, les deux éléments du processus sont liés et en continu. Le second moment de l’évaluation apparait si, dans le processus itératif, le TS perçoit une dissonance. Il est essentiel d’en identifier la nature pour la prendre en compte et maintenir la finalité de l’activité qui consiste à évaluer l’autonomie fonctionnelle à des fins compensatrices. Le TS doit identifier l’objet de la dissonance pour pouvoir cerner avec la personne le besoin inhérent à la perte d’autonomie et envisager d’y remédier. La prise en compte de cette dissonance vient ralentir le déroulement de l’activité. Le raisonnement qui, jusque-là, était relié à la collecte d’informations s’en dissocie pour analyser ce qui vient faire obstacle à l’activité d’évaluation à partir de la situation. Les composantes qui génèrent la dissonance paraissent reliées à la quotidienneté, aux conditions de vie à domicile de la personne (cohérence/incohérence, refus de services, autonégligence, maltraitance, agressivité). La dissonance génère une activité plus complexe pour évaluer la situation. L’autonomie fonctionnelle se décline toujours sur l’axe mobilité/cognition avec comme balises d’intervention la sécurité et l’intégrité de la personne. Or, pour ce faire, les TS raisonnent selon trois schèmes. Dans les situations où, pour décider de la suite du dossier, il faut en référer à une norme (de service, de profession, etc.) le raisonnement est déontologique. Il est aussi des situations où le TS agit au regard de valeurs et de représentations qui relèvent de sa sphère personnelle. Nous désignons ce raisonnement d’instinctuel. Enfin, le TS peut naviguer entre ces deux orientations et choisir la voie du raisonnement clinique que nous qualifions d’éthique et se rapproche alors des pratiques prudentielles qui sont marquées par l’incertitude.

Sequence stratigraphy and sea-level history of Kangan formation in south pars field

Dehram group includes Faraghan, Dalan and Kangan formations. Kangan formation ages lower terias. That is one of the important reservoir rocks of southern Iran and Persian Gulf. In this research Kangan formation is studied in two A and B wells. Based on 75 studies on thin section, four carbonate litho acies association A, B, C, D with 12 subfacies are identified. A lithofacies association includes 4 subfacies: A1, A2, A3 and A4. B lithofacies association consists of 3 subfacies: B1, B2 and B3. C lithofacies association consists of 3 subfacies: C1, C2, C3 and D lithofacies association includes 2 subfacies: D1 and D2. On the base of studies lithofacies association of Kangan formations are formed in 3 environments of: Tidal Flat, Lagoon and Barrier Shore Complex in a Carbonated Platform Ramp type. Diagenetic processes have effected this formation. The most important Diagenetic processes are: Cementation, Anhydritization, Micrization, Neomorphism, Bioturbation, Dissolution, Compaction, Dolomitization and Porosity. Sequence staratigraphy studies were performed base on the vertical and horizontal relationship of lithofacies association and well logging in gamma ray and sonic type that causes the identification of two sedimentary sequences: First sedimentary sequence includes: Transgressive System Tract (TST) and High Stand System Tract (HST). The lower boundary of this sequence is in Sequence Boundary 1 (SB1) which shows unconformities of Dalan and Kangan that are Permian-terias unconformities. The upper boundary is in Sequence Boundary 2 (SB2) type that is identified by carbonate facies associated by anhydrite nodular. Second sedimentary sequence includes: TST and HST. Lower and upper boundaries of these sequences are both in SB2 type. The lower and upper boundary is made of carbonate facies with anhydrite nodular.

Recombinant human endostatin reduces hypertrophic scar formation in rabbit ear model through down- regulation of VEGF and TIMP-1.

Background: Recombinant human endostatin (Endostar) has been widely used to suppress angiogenesis in carcinoma patients. Hypertrophic scar (HS) tissue, much like a carcinoma, is often associated with angiogenesis. However, there have been few studies conducted on the effects of Endostar on HS or its mechanism. Objective: This paper investigated the effects Endostar on the HS of rabbit ears and studied the effects of Endostar on VEGF and TIMP-1 expression. Methods: Sixteen New Zealand white rabbits were used to establish HS models. Then, rabbit ears containing HS were randomly assigned to either the Endostar group or the control group. The changes of appearance and histology were evaluated using the naked eye, hematoxylin eosin staining, and a scar elevation index. The VEGF and TIMP-1 expressions were detected by immunohistochemical staining, RT-PCR, and western blot. Results: The thickness of the connective tissue in the Endostar group were thinner, the numbers of micro vessels and fibroblasts were fewer, and the collagen fibers were smoother. Moreover, the mRNA and protein expressions of VEGF and TIMP-1 in the Endostar group were significantly lower than those in the control group. Conclusion: The results suggested that Endostar reduced the formation of HS by down-regulation of VEGF and TIMP-1 expressions.

Coarse-graining and renormalisation group methods for the elucidation of the kinetics of complex nucleation and growth processes

We review our work on generalisations of the Becker-Doring model of cluster-formation as applied to nucleation theory, polymer growth kinetics, and the formation of upramolecular structures in colloidal chemistry. One valuable tool in analysing mathematical models of these systems has been the coarse-graining approximation which enables macroscopic models for observable quantities to be derived from microscopic ones. This permits assumptions about the detailed molecular mechanisms to be tested, and their influence on the large-scale kinetics of surfactant self-assembly to be elucidated. We also summarise our more recent results on Becker-Doring systems, notably demonstrating that cross-inhibition and autocatalysis can destabilise a uniform solution and lead to a competitive environment in which some species flourish at the expense of others, phenomena relevant in models of the origins of life.

Methane seep carbonates yield clumped isotope signatures out of equilibrium with formation temperatures

Methane cold seep systems typically exhibit extensive buildups of authigenic carbonate minerals, resulting from local increases in alkalinity driven by methane oxidation. Here, we demonstrate that modern seep authigenic carbonates exhibit anomalously low clumped isotope values (Delta(47)), as much as similar to 0.2 parts per thousand lower than expected values. In modern seeps, this range of disequilibrium translates into apparent temperatures that are always warmer than ambient temperatures, by up to 50 degrees C. We examine various mechanisms that may induce disequilibrium behaviour in modern seep carbonates, and suggest that the observed values result from several factors including kinetic isotopic effects during methane oxidation, mixing of inorganic carbon pools, pH effects and rapid precipitation. Ancient seep carbonates studied here also exhibit potential disequilibrium signals. Ultimately, these findings indicate the predominance of disequilibrium clumped isotope behaviour in modern cold seep carbonates that must be considered when characterizing environmental conditions in both modern and ancient cold seep settings.