Variability of nanoindentation responses of bone and artificial bone-like composites

Nanoindentation is a popular technique for measuring the intrinsic mechanical response of bone and has been used to measure a single-valued elastic modulus. However, bone is a composite material with 20-80 nm hydroxyapatite plates embedded in a collagen matrix, and modern instrumentation allows for measurements at these small length scales. The present study examines the indentation response of bone and artificial gelatin-apatite nanocomposite materials across three orders of magnitude of lengthscale, from nanometers to micrometers, to isolate the composite phase contributions to the overall response. The load-displacement responses were variable and deviated from the quadratic response of homogeneous materials at small depths. The distribution of apparent elastic modulus values narrowed substantially with increasing indentation load. Indentation of particulate nanocomposites was simulated using finite element analysis. Modeling results replicated the convergence in effective modulus seen in the experiments. It appears that the apatite particles are acting as the continuous ("matrix") phase in bone and nanocomposites. Copyright © 2004 by ASME.

A model for nonlinear viscoelastic mechanical responses of collagenous soft tissues

Experimental observations of the time-dependent mechanical responses of collagenous tissues have demonstrated behavior that deviates from standard treatments of linear or quasi-linear viscoelasticity. In particular, time-dependent deformation can be strongly coupled to strain level, and strain-rate independence can be observed under monotonic loading, even for a tissue with dramatic stress relaxation. It was postulated that this nonlinearity is fundamentally associated with gradual recruitment of individual collagen fibrils during applied mechanical loading. Based on previously observed experimental results for the time-dependent response of collagenous soft tissues, a model is developed to describe the mechanical behavior of these tissues under uniaxial loading. Tissue stresses, under applied strain-controlled loading, are assumed to be a sum of elastic and viscoelastic stress contributions. The relative contributions of elastic and viscoelastic stresses is assumed to vary with strain level, leading to strain- and time-dependent mechanical behavior. The model formulation is examined under conditions of monotonic loading at varying constant strain rates and stress-relaxation at different applied strain levels. The model is compared with experimental data for a membranous biological soft tissue, the amniotic sac, and is found to agree well with experimental results. The limiting behavior of the novel model, at large strains relative to the collagen recruitment, is consistent with the quasi-linear viscoelastic approach. © 2006 Materials Research Society.

Influence of nitrogen salts on growth and physiological responses of Rhizophora apiculata Blume in non-aerated water culture

Influence of two different forms of nitrogen on growth and physiological aspects of water-cultured seedlings of Rhizophora apiculata was studied. Of the two forms of nitrogen supplied to the growth medium, ammonium nitrogen was better than nitrate nitrogen by exhibiting increased dry matter production, shoot length, leaf area and also enhanced the contents of carotenoids, chlorophylls and their presence in photosystems and light harvesting protein complex.

Identification and characterization of novel reptile cathelicidins from elapid snakes

Three cDNA sequences coding for elapid cathelicidins were cloned from constructed venom gland cDNA libraries of Naja atra, Bungarus fasciatus and Ophiophagus hannah. The open reading frames of the cloned elapid cathelicidins were all composed of 576 bp an

Effects of rhFSH regimen and time interval on ovarian responses to repeated stimulation cycles in rhesus monkeys during a physiologic breeding season

We studied the effects of repeated stimulation by recombinant human FSH (rhFSH) at various time intervals during a physiologic breeding season in rhesus monkeys. Ovarian recovery and responses were assessed by ultrasonography, serum steroid concentrations

Differential cognitive responses to guqin music and piano music in Chinese subjects: an event-related potential study

目的 研究古琴(一种古老的中国乐器)和钢琴音乐对认知的影响.方法 记录和分析了中国被试在两种音乐背景(古琴音乐,钢琴音乐)下完成听觉oddball任务的行为和事件相关电位(event-related potential,ERP)数据.结果 中国被试在本土文化的音乐环境(古琴音乐)下,前额区诱导出更大的P300,这一结果和已有的相关研究是相符的.同时,不同音乐背景对ERP产生的影响在N1和LPC(包括P300和P500)上也表现出差别:中国被试在古琴音乐背景下比钢琴音乐背景下表现出更多的右前侧颞叶的参与.结论 因为古琴音乐的五声调式和汉语发音的音调具有对应关系,因此我们推断在古琴音乐下所表现出的这种特性与被试的汉语环境有关.

Task-dependent coordination of rapid bimanual motor responses.

Optimal feedback control postulates that feedback responses depend on the task relevance of any perturbations. We test this prediction in a bimanual task, conceptually similar to balancing a laden tray, in which each hand could be perturbed up or down. Single-limb mechanical perturbations produced long-latency reflex responses ("rapid motor responses") in the contralateral limb of appropriate direction and magnitude to maintain the tray horizontal. During bimanual perturbations, rapid motor responses modulated appropriately depending on the extent to which perturbations affected tray orientation. Specifically, despite receiving the same mechanical perturbation causing muscle stretch, the strongest responses were produced when the contralateral arm was perturbed in the opposite direction (large tray tilt) rather than in the same direction or not perturbed at all. Rapid responses from shortening extensors depended on a nonlinear summation of the sensory information from the arms, with the response to a bimanual same-direction perturbation (orientation maintained) being less than the sum of the component unimanual perturbations (task relevant). We conclude that task-dependent tuning of reflexes can be modulated online within a single trial based on a complex interaction across the arms.

Responses to seasonal changes in nutrient quality and patchiness of food in a multigroup community of Tibetan macaques at Mt. Emei

Provisioning along pedestrian trails by tourists much increased the nutrient quality and patchiness of food (NqPF)for Tibetan macaques (Macaca thibetana) at Mt Emei in spring and summer. In the habitat at a temperate-subtropical transition zone, the mncaque's NqPF could be ordered in a decreasing rank from spring summer to autumn to winter With the aid of a radio-tracking system, I collected ranging data on a multigroup community in three 70-day periods representing the different seasons in 1991-92, Rank-order correlation on the data show that with the decline of NqPF; the groups tended to increase days away from the trail, their effective range size (ERS) their exclusive area (EA) and the number of days spent in the EA, and reduced their group/community density and the ratio of the overlapped range to the seasonal range (ROR). In icy/snowy winter; the macaques searched for mature leaves slowly and carefully in the largest seasonal range with a considerable portion that was nor used in other seasons. Of the responses, the ROR decreased with the reduction in group/community density; and the ERS was the function of both group size (+) and intergroup rank (-) when favorite food was highly clumped. All above responses were clearly bound to maximize foraging effectiveness and minimize energy expenditure, and their integration in term of changes in time and space leads to better understanding macaque ecological adaptability. Based on this study and previous work on behavioral and physiological factors, I suggest a unifying theory of intergroup interactions. Ir! addition, as the rate of behavioral interactions,was also related to the group density, I Waser's (1976) gas model probably applies to behavioral, as well as spatial, data on intergroup interactions.

The use of spatial impulse responses to characterise flexible forming processes with mobile tools

A novel test method for the characterisation of flexible forming processes is proposed and applied to four flexible forming processes: Incremental Sheet Forming (ISF), conventional spinning, the English wheel and power hammer. The proposed method is developed in analogy with time-domain control engineering, where a system is characterised by its impulse response. The spatial impulse response is used to characterise the change in workpiece deformation created by a process, but has also been applied with a strain spectrogram, as a novel way to characterise a process and the physical effect it has on the workpiece. Physical and numerical trials to study the effects of process and material parameters on spatial impulse response lead to three main conclusions. Incremental sheet forming is particularly sensitive to process parameters. The English wheel and power hammer are strongly similar and largely insensitive to both process and material parameters. Spinning develops in two stages and is sensitive to most process parameters, but insensitive to prior deformation. Finally, the proposed method could be applied to modelling, classification of existing and novel processes, product-process matching and closed-loop control of flexible forming processes. © 2012 Elsevier B.V.

User responses to the learning demands of consumer products

Designers are typically male, under 35 years old and unimpaired. Users can be of any age and currently over 15% will have some form of impairment. As a result a vast array of consumer products suit youthful males and in many cases exclude other demographics (e.g. Keates and Clarkson, 2004). In studying the way a range of users learn how to use new products, key cognitive difficulties are revealed and linked back to the areas of the product causing the problems. The trials were structured so each user had to complete a specific set of tasks and were consistent across the user spectrum. The tasks set aimed to represent both everyday usage and less familiar functions. Whilst the knowledge gained could provide designers with valuable guidelines for the specific products examined, a more general abstraction provides knowledge of the pitfalls to avoid in the design of other product families.