Evaluation of in vitro resistance of titanium and resorbable (poly-L-DL-lactic acid) fixation systems on the mandibular angle fracture

The purpose of this study was to compare, by mechanical in vitro testing, a 2.0-mm system made with poly-L-DL-lactide acid with an analogue titanium-based system. Mandible replicas were used as a substrate and uniformly sectioned on the left mandibular angle. The 4-hole plates were adapted and stabilized passively in the same site in both groups using four screws, 6.0 mm long. During the resistance-to-load test, the force was applied perpendicular to the occlusal plane at three different points: first molar at the plated side; first molar at the contralateral side; and between the central incisors. At 1 mm of displacement, no statistically significant difference was found. At 2 mm displacement, a statistically significant difference was observed when an unfavourable fracture was simulated and the load was applied in the contralateral first molar and when a favourable fracture was simulated and the load was applied between the central incisors. At the failure displacement, a statistically significant difference was observed only when the favourable fracture was simulated and the load was applied on the first molar at the plated side. In conclusion, despite more failure, the poly-L-DL-lactic acid-based system was effective.

Absence of Melatonin Induces Night-Time Hepatic Insulin Resistance and Increased Gluconeogenesis Due to Stimulation of Nocturnal Unfolded Protein Response

It is known that the circadian rhythm in hepatic phosphoenolpyruvate carboxykinase expression (a limiting catalytic step of gluconeogenesis) and hepatic glucose production is maintained by both daily oscillation in autonomic inputs to the liver and night feeding behavior. However, increased glycemia and reduced melatonin (Mel) levels have been recently shown to coexist in diabetic patients at the end of the night period. In parallel, pinealectomy (PINX) is known to cause glucose intolerance with increased basal glycemia exclusively at the end of the night. The mechanisms that underlie this metabolic feature are not completely understood. Here, we demonstrate that PINX rats show night-time hepatic insulin resistance characterized by reduced insulin-stimulated RAC-alpha serine/threonine-protein kinase phosphorylation and increased phosphoenolpyruvate carboxykinase expression. In addition, PINX rats display increased conversion of pyruvate into glucose at the end of the night. The regulatory mechanism suggests the participation of unfolded protein response (UPR), because PINX induces night-time increase in activating transcription factor 6 expression and prompts a circadian fashion of immunoglobulin heavy chain-binding protein, activating transcription factor 4, and CCAAT/enhancer-binding protein-homologous protein expression with Zenith values at the dark period. PINX also caused a night-time increase in Tribble 3 and regulatory-associated protein of mammalian target of rapamycin; both were reduced in liver of PINX rats treated with Mel. Treatment of PINX rats with 4-phenyl butyric acid, an inhibitor of UPR, restored night-time hepatic insulin sensitivity and abrogated gluconeogenesis in PINX rats. Altogether, the present data show that a circadian oscillation of UPR occurs in the liver due to the absence of Mel. The nocturnal UPR activation is related with night-time hepatic insulin resistance and increased gluconeogenesis in PINX rats. (Endocrinology 152: 1253-1263, 2011)

UPR induces transient burst of apoptosis in islets of early lactating rats through reduced AKT phosphorylation via ATF4/CHOP stimulation of TRB3 expression

Bromati CR, Lellis-Santos C, Yamanaka TS, Nogueira TC, Leonelli M, Caperuto LC, Gorjao R, Leite AR, Anhe GF, Bordin S. UPR induces transient burst of apoptosis in islets of early lactating rats through reduced AKT phosphorylation via ATF4/CHOP stimulation of TRB3 expression. Am J Physiol Regul Integr Comp Physiol 300: R92-R100, 2011. First published November 10, 2010; doi:10.1152/ajpregu.00169.2010.-Endocrine pancreas from pregnant rats undergoes several adaptations that comprise increase in beta-cell number, mass and insulin secretion, and reduction of apoptosis. Lactogens are the main hormones that account for these changes. Maternal pancreas, however, returns to a nonpregnant state just after the delivery. The precise mechanism by which this reversal occurs is not settled but, in spite of high lactogen levels, a transient increase in apoptosis was already reported as early as the 3rd day of lactation (L3). Our results revealed that maternal islets displayed a transient increase in DNA fragmentation at L3, in parallel with decreased RAC-alpha serine/threonine-protein kinase (AKT) phosphorylation (pAKT), a known prosurvival kinase. Wortmannin completely abolished the prosurvival action of prolactin (PRL) in cultured islets. Decreased pAKT in L3-islets correlated with increased Tribble 3 (TRB3) expression, a pseudokinase inhibitor of AKT. PERK and eIF2 alpha phosphorylation transiently increased in islets from rats at the first day after delivery, followed by an increase in immunoglobulin heavy chain-binding protein (BiP), activating transcription factor 4 (ATF4), and C/EBP homologous protein (CHOP) in islets from L3 rats. Chromatin immunoprecipitation (ChIP) and Re-ChIP experiments further confirmed increased binding of the heterodimer ATF4/CHOP to the TRB3 promoter in L3 islets. Treatment with PBA, a chemical chaperone that inhibits UPR, restored pAKT levels and inhibited the increase in apoptosis found in L3. Moreover, PBA reduced CHOP and TRB3 levels in beta-cell from L3 rats. Altogether, our study collects compelling evidence that UPR underlies the physiological and transient increase in beta-cell apoptosis after delivery. The UPR is likely to counteract prosurvival actions of PRL by reducing pAKT through ATF4/CHOP-induced TRB3 expression.

UPR-mediated TRIB3 expression correlates with reduced AKT phosphorylation and inability of interleukin 6 to overcome palmitate-induced apoptosis in RINm5F cells

Unfolded protein response (UPR)-mediated pancreatic beta-cell death has been described as a common mechanism by which palmitate (PA) and pro-inflammatory cytokines contribute to the development of diabetes. There are evidences that interleukin 6 (IL6) has a protective action against beta-cell death induced by proinflammatory cytokines; the effects of IL6 on PA-induced apoptosis have not been investigated yet. In the present study, we have demonstrated that PA selectively disrupts IL6-induced RAC-alpha serine/threonine-protein kinase (AKT) activation without interfering with signal transducer and activator of transcription 3 phosphorylation in RINm5F cells. The inability of IL6 to activate AKT in the presence of PA correlated with an inefficient protection against PA-induced apoptosis. In contrast to PA, IL6 efficiently reduced apoptosis induced by pro-inflammatory cytokines. In addition, we have demonstrated that IL6 is unable to overcome PA-stimulated UPR, as assessed by activating transcription factor 4 (ATF4) andC/EBP homologous protein (CHOP) expression, X-box binding protein-1 gene mRNA splicing, and pancreatic eukaryotic initiation factor-2 alpha kinase phosphorylation, whereas no significant induction of UPR by pro-inflammatory cytokines was detected. This unconditional stimulation of UPR and apoptosis by PA was accompanied by the stimulation of CHOP and tribble3 (TRIB3) expression, irrespective of the presence of IL6. These findings suggest that IL6 is unable to protect pancreatic beta-cells from PA-induced apoptosis because it does not repress UPR activation. In this way, CHOP and ATF4 might mediate PA-induced TRIB3 expression and, by extension, the suppression of IL6 activation of pro-survival kinase AKT. Journal of Endocrinology (2010) 206, 183-193

Osmotin from Calotropis procera latex: New insights into structure and antifungal properties

This study aimed at investigating the structural properties and mechanisms of the antifungal action of CpOsm, a purified osmotin from Calotropis procera latex. Fluorescence and CD assays revealed that the CpOsm structure is highly stable, regardless of pH levels. Accordingly, CpOsm inhibited the spore germination of Fusarium solani in all pH ranges tested. The content of the secondary structure of CpOsm was estimated as follows: alpha-helix (20%), beta-sheet (33%), turned (19%) and unordered (28%). RMSD 1%. CpOsm was stable at up to 75 degrees C, and thermal denaturation (T(m)) was calculated to be 77.8 degrees C. This osmotin interacted with the negatively charged large unilamellar vesicles (LUVs) of 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-rac-1-glycerol (POPG), inducing vesicle permeabilization by the leakage of calcein. CpOsm induced the membrane permeabilization of spores and hyphae from Fusarium solani, allowing for propidium iodide uptake. These results show that CpOsm is a stable protein, and its antifungal activity involves membrane permeabilization, as property reported earlier for other osmotins and thaumatin-like proteins. (C) 2011 Elsevier B.V. All rights reserved.

Immobilization of liposomes in nanostructured layer-by-layer films containing dendrimers

Artificial vesicles or liposomes composed of lipid bilayers have been widely exploited as building blocks for artificial membranes, in attempts to mimic membrane interaction with drugs and proteins and to investigate drug delivery processes. In this study we report on the immobilization of liposomes of 1,2-dipalmitoyi-sn-Glycero-3-[Phospho-rac-(1-glycerol)] (Sodium Salt) (DPPG) in layer-by-layer (LbL) films, alternated with poly (amidoamine) G4 (PAMAM) dendrimer layers. The average size of the liposomes in solution was 120 nm as determined by dynamic light scattering, with their spherical shape being inferred from scanning electron microscopy (SEM) in cast films. LbL films containing up to 20 PAMAM/DPPG bilayers were assembled onto glass and/or silicon wafer substrates. The growth of the multilayers was achieved by alternately immersing the substrates into the PAMAM and DPPG solutions for 5 and 10 min, respectively. The formation of PAMAM/DPPG liposome multilayers and its ability to interact with BSA were confirmed by Fourier transform infrared spectroscopy (FTIR). The structural features and film thickness were obtained using X-ray diffraction and surface plasmon resonance (SPR). (c) 2007 Elsevier B.V. All rights reserved.

First stereocontrolled acetylation of a hydroxypropargylpiperidone by lipase CALB

Hydroxypropargylpiperidones rac-1-3 were efficiently obtained by a one-pot three-component coupling reaction; enantioenriched propargylpiperidones were then obtained by a kinetic resolution process using the lipase from Candida antarctica. Lipase CALB has been shown to efficiently catalyse the stereocontrolled acetylation of hydroxypropargylpiperidones rac-3 by promoting stereodiscrimination at the carbinolic centre. The enzymatic catalytic processes allow the separation of the (S,R)- and (S,S)-3 diastereoisomers into the corresponding acetates produced as a (R,S)- and (R,R)-6 diastereoisomeric pair. The CALB was able to discriminate the stereogenic centre of the secondary (R)-enantiomer of rac-3 according to the Kaslauzkas rule. The remote stereogenic centre was not discriminated by the lipase. The functionalised enantioenriched diastereoisomers obtained are important building blocks in organic synthesis. (C) 2010 Elsevier Ltd. All rights reserved.

Synthesis of new fluorous modular chiral ligand derivatives from amino alcohols and application in enantioselective carbon-carbon bond-forming alkylation reactions

N-Trifluoracyl beta-chalcogeno amides and N-perfluoracyl beta-thio amide ligands were prepared by a simple and efficient reaction sequence. These new ligands were evaluated in palladium-catalyzed alkylation of rac-(E)-1,3-diphenyl-2-propenyl acetate in the presence of dimethyl malonate and an enantioselectivity of up to 99% was obtained. After catalysis, the fluorous ligand can be easily recovered by liquid-liquid extraction and reused without loss in the activity. (C) 2010 Elsevier Ltd. All rights reserved.

Block Copolymers Containing (R)-3-Hydroxybutyrate and Isosorbide Succinate or (S)-Lactic Acid Mers

A new aliphatic block copolyester was synthesized in bulk from transesterification techniques between poly((R)-3-hydroxybutyrate) (PHB) and poly(isosorbide succinate) (PIS). Additionally, other two block copolyesters were synthesized in bulk either from transesterification reactions involving PHB and poly(l-lactide) (PLLA) or from ring-opening copolymerization of l-lactide and hydroxyl-terminated PHB, as result of a previous transesterification reactions with isosorbide. Two-component blends of PHB and PIS or PLLA were also prepared as comparative systems. SEC, MALDI-TOF mass spectrometry (MALDI-TOFMS), (1)H and (13)C NMR spectroscopy, WAXD, solubility tests, and TG thermal analysis were used for characterization. The block copolymer structures of the products were evidenced by MALDI-TOFMS, (13)C NMR, and WAXD data. The block copolymers and the corresponding binary blends presented different solubility properties, as revealed by solubility tests. Although the incorporation of PIS sequences into PHB main backbone did not enhance the thermal stability of the product, it reduced its crystallinity, which could be advantageous for faster biodegradation rate. These products, composed of PHB and PIS or PLLA sequences, are an interesting alternative in biomedical applications.

Thermal behavior and stability of biodegradable spray-dried microparticles containing triamcinolone

Thermal analysis has been widely used for obtaining information about drug-polymer interactions and for pre-formulation studies of pharmaceutical dosage forms. In this work, biodegradable microparticles Of Poly (D,L-lactide-co-glycolide) (PLGA) containing triamcinolone (TR) in various drug:polymer ratios were produced by spray drying. The main purpose of this study was to study the effect of the spray-drying process not only on the drug-polymer interactions but also on the stability of microparticles using differential scanning calorimetry (DSC), thermogravimetry (TG) and derivative thermogravimetry (DTG), X-ray analysis (XRD), and infrared spectroscopy (IR). The evaluation of drug-polymer interactions and the pre-formulation studies were assessed using the DSC, TG and DTG, and IR. The quantitative analysis of drugs entrapped in PLGA microparticles was performed by the HPLC method. The results showed high levels of drug-loading efficiency for all used drug: polymer ratio, and the polymorph used for preparing the microparticles was the form B. The DSC and TG/DTG profiles for drug-loaded microparticles were very similar to those for the physical mixtures of the components. Therefore, a correlation between drug content and the structural and thermal properties of drug-loaded PLGA microparticles was established. These data indicate that the spray-drying technique does not affect the physico-chemical stability of the microparticle components. These results are in agreement with the IR analysis demonstrating that no significant chemical interaction occurs between TR and PLGA in both physical mixtures and microparticles. The results of the X-ray analysis are in agreement with the thermal analysis data showing that the amorphous form of TR prevails over a small fraction of crystalline phase of the drug also present in the TR-loaded microparticles. From the pre-formulation studies, we have found that the spray-drying methodology is an efficient process for obtaining TR-loaded PLGA microparticles. (C) 2008 Elsevier B.V. All rights reserved.

Thermal analysis of biodegradable microparticles containing ciprofloxacin hydrochloride obtained by spray drying technique

Thermal analysis has been extensively used to obtain information about drug-polymer interactions and to perform pre-formulation studies of pharmaceutical dosage forms. In this work, biodegradable microparticles of poly(D,L-lactide-co-glycolide) (PLGA) containing ciprofloxacin hydrochloride (CP) in various drug:polymer ratios were obtained by spray drying. The main purpose of this study was to investigate the effect of the spray drying process on the drug-polymer interactions and on the stability of microparticles using differential scanning calorimetry (DSC), thermogravimetry (TG) and derivative thermogravimetry (DTG) and infrared spectroscopy (IR). The results showed that the high levels of encapsulation efficiency were dependant on drug:polymer ratio. DSC and TG/DTG analyses showed that for physical mixtures of the microparticles components the thermal profiles were different from those signals obtained with the pure substances. Thermal analysis data disclosed that physical interaction between CP and PLGA in high temperatures had occurred. The DSC and TG profiles for drug-loaded microparticles were very similar to the physical mixtures of components and it was possible to characterize the thermal properties of microparticles according to drug content. These data indicated that the spray dryer technique does not affect the physicochemical properties of the microparticles. In addition, the results are in agreement with IR data analysis demonstrating that no significant chemical interaction occurs between CP and PLGA in both physical mixtures and microparticles. In conclusion, we have found that the spray drying procedure used in this work can be a secure methodology to produce CP-loaded microparticles. (C) 2007 Elsevier B.V. All rights reserved.

Gestão e sucessão de empresas familiares: uma revisão de literatura.

O presente estudo contempla propostas para algumas lacunas encontradas nos trabalhos sobre empresas familiares, por meio de uma análise da produção científica, com enfoque conceitual e no relacionamento intergeracional, de todos os artigos publicados nos eventos da Associação Nacional de Pós-Graduação e Pesquisa em Administração (EnANPAD, Eneo, 3ES e EnGPR), e nos periódicos RAC, RAE, RAUSP e O&S, no período de 1961 a 2008, de acordo com a disponibilidade em seus sitios, realizada em outubro de 2008, além de consultas nas bibliotecas da Fundação Getúlio Vargas, no Rio de Janeiro (em dezembro de 2008) e em São Paulo (em dezembro de 2008 e em maio de 2009). Nove critérios de análise foram utilizados: pesquisas em empresas familiares, frequência das publicações, citações e referências, autores mais prolíficos, instituições que mais publicam, média de artigos publicados, fundamentação teórica das investigações, aspectos conceituais e pai e filho. Dos 154 artigos encontrados que, a priori, estavam direcionados para esta temática, somente 89 foram incluídos por apresentarem adequação aos objetivos da pesquisa. Os resultados alcançados revelam diversas contradições entre as pesquisas, tanto sob o ponto de vista conceitual quanto metodológico. Não é possível, ainda, encontrar um conceito de empresa familiar. Diversos fatores influenciam na imagem negativa associada a essas organizações, mas que não vão ser capazes de ofuscar o brilhantismo daquelas que são as principais responsáveis pela distribuição de riqueza, geração de emprego e crescimento econômico, no Brasil e no mundo. E quando aproveitam as vantagens competitivas que possuem, são capazes de se sobressair perante a concorrência e reverter qualquer situação que vá de contra aos seus interesses.

Padrões de citação na produção científica de administração no Brasil : 1997-2002

Nesta pesquisa a bibliometria foi utilizada para mapear e analisar os padrões de citação na área de Administração com base nos artigos publicados nos principal congresso de Administração nacional, o ENANPAD, e nos principais periódicos acadêmicos da área (RAC, RAE, RAP e RAUSP) entre os anos de 1997 e 2002. A falta de uma análise aprofundada da base teórica/ metodológica ¿ representada pelas referências teóricas - utilizada na pesquisa nacional em administração motivou esse estudo no sentido de analisar de aspectos da produção científica, anteriormente não investigados, que são refletidos na base bibliográfica utilizada pelos autores na área de Administração: a densidade da publicação em geral e ao longo do tempo, os autores mais prolíficos, as instituições que geram mais pesquisadores e o padrão de citações, os tipos de publicação mais utilizadas em pesquisas nacionais, as obras mais referenciadas, os veículos mais citados, o tempo de impacto da pesquisa nacional e o fator de impacto dos periódicos nacionais. Todos esses fatores quando analisados permitem contribuir para o preenchimento das lacunas na análise da produção científica nacional.

Determinação da microestrutura e relação com as propriedades dos terpolímeros de etileno-propileno-alfa-olefinas

Na busca por novos materiais, foram sintetizados uma série de terpolímeros de etilenopropileno –α-olefinas superiores (1-hexeno, 1-deceno e 1-octadeceno) usando o sistema catalítico rac-Et[Ind]2ZrCl2/MAO. A razão entre E/P foi variada e duas concentrações de termonômeros foram estudadas. Neste trabalho foram apresentados os resultados qualitativos e quantitativos da caracterização desses terpolímeros através da técnica de ressonância magnética de carbono 13 (RMN de 13C). Foram apresentados os deslocamentos químicos observados e devidamente identificados, assim como a análise quantitativa da distribuição das tríades, do comprimento médio de unidades consecutivas e das razões de reatividade. O efeito da adição de uma olefina de cadeia longa ao sistema etileno-propileno foi avaliado através dos resultados obtidos da atividade catalítica, teor de incorporação, nas propriedades térmicas, na massa molar e propriedades mecânicas. Também foi realizado um estudo da heterogeneidade de algumas amostras através do fracionamento por eluição com gradiente de temperatura (TREF). O sistema rac-Et[Ind]2ZrCl2/MAO mostrou-se eficiente na terpolimerização do etileno e a técnica de RMN de 13C permitiu a completa caracterização de todos os terpolímeros obtidos. Esses terpolímeros mostraram-se como um sistema complexo onde foi possível observar que, dependendo do tipo de olefina que irá coordenar no sítio ativo do rac- Et[Ind]2ZrCl2/MAO, haverá mudanças significativas nas atividade e nas propriedades desses materiais. Verificou-se que as três α-olefinas superiores estudadas foram incorporadas a cadeia polimérica, sendo que na maioria dos casos a α-olefina mais incorporada foi o 1-octadeceno nas duas concentrações de termonômero analisadas. O aumento da incorporação de propeno acarreta uma diminuição no teor de termonômero incorporado. A incorporação do propeno acarreta uma diminuição das unidades cristalizáveis de etileno, provocando um decréscimo na temperatura de fusão, com o aumento da incorporação de propeno ocorre um aumento das seqüências de propeno cristalizáveis e conseqüentemente a temperatura de fusão. A massa molecular também diminui devido ao aumento das reações de terminação por β-eliminação de hidreto. Observou-se que os terpolímero apresentaram um módulo menor do que os copolímeros. Esses terpolímeros estudados apresentaram um comportamento elastomérico, podendo ser classificados como Elastômeros Termoplásticos.

Síntese e caracterização do poli (L-ácido láctico) para uso como biomaterial

O poli (ácido L-láctico) (PLLA) é um material de grande interesse na área científica, por ser um polímero biodegradável e bioabsorvível, e pela sua grande utilização na área biomédica. Este estudo teve como objetivo a síntese de PLA através de policondensação direta e em meio supercrítico (scCO2) e sua caracterização. As duas rotas buscam um processo limpo de síntese dos polímeros, livre de solvente orgânico. Além disso, procurou-se reduzir os custos de obtenção utilizando matéria-prima nacional (ácido láctico P.A. comercial). As reações de polimerização de PLLA realizada por policondensação e em scCO2 foram feitas em dois estágios. No primeiro estágio da síntese, para ambos os processos, o pré-polímero do ácido láctico foi obtido através de uma reação simples de condensação, com retirada de água, sob atmosfera inerte de N2 e 160ºC. Na segunda etapa, para a reação de policondensação, o polímero PLLA, foi obtido a partir do pré-polímero em uma temperatura de 140ºC e sob pressão reduzida por o tempo desejado (100h, 200h e 350h). As reações em meio scCO2 foram realizadas em um reator de aço inoxidável de 100 mL equipado com uma barra de agitação magnética, sob pressão de CO2 (80atm) e a 90ºC por 4 horas. Em ambas as reações de polimerização foram usadas complexos de estanho como catalisador. No início deste trabalho foram realizadas algumas reações utilizando o D, L-ácido láctico em scCO2. Também foi realizada a síntese do lactide e a polimerização deste por abertura de anel. Para efeito comparativo, também foi realizada a polimerização do lactide comercial. Os polímeros obtidos foram caracterizados por espectroscopia de Ressonância Magnética Nuclear de Próton (1HRMN), por espectroscopia de infravermelho (IV), por cromatografia de permeação em gel (GPC), por calorimetria exploratória de varredura (DSC) e pela técnica de análise termogravimétrica (TGA) A reação de policondensação revelou ser uma rota sintética excelente na obtenção de polímeros de PLA com peso molecular variados. A formação dos polímeros a partir do monômero de ácido láctico foi confirmada pelo desaparecimento da banda de OH em 3500 cm-1 no espectro de infravermelho. O espectro de 1H-RMN de ambos os polímeros, mostrou um sinal atribuído ao hidrogênio do grupo CH3 em 1,52 ppm e um sinal atribuído aos hidrogênios do grupo do CH em 5,16 ppm, que estão de acordo com a literatura. Os polímeros obtidos possuem potencial para uso clínico como materiais de implante.