Productivity characteristics of endive as a function of spacing

Endive (Cichorium intybus) is one of the vegetables least studied in Brazil with respect to the behavior of the most commercialized cultivars, but it is known that the number of plants per area is one of the factors that most influences the productivity of various crops. Thus, the objective of this work was to evaluate the behavior of endive using four spacings between rows and five spacings between plants, in the region of Jaboticabal-SP. The experiment was conducted in the field in the period of August 12, 2008 to November 6, 2008, in the experimental area of the Sector of Vegetable Crops and Aromatic-Medicinal Plants, Department of Crop Sciences, School of Agricultural and Veterinary Sciences - UNESP-FCAV. The experimental design utilized was a randomized block design with a 4 × 5 factorial scheme, i.e., four spacings between rows (0.15, 0.20, 0.25 and 0.30 m) and five spacings between plants (0.10, 0.15, 0.20, 0.25 and 0.30 m), with three repetitions. The endive cultivar studied was 'Pão-de-Acucar', obtained from the company Tecnoseed. Seedlings were established utilizing the sowing system in 200-cell Styrofoam trays containing the substrate Plantmax Vegetables® HA. The seedlings were transplanted at 37 days after planting. After harvesting, the following characteristics were determined: height (cm), diameter of the plant in rows (cm), diameter of the plant in between rows (cm), number of leaves, fresh weight (g) and total estimated productivity (t/ha). There were no interactions between the factors studied. Based on the data, we conclude that spacings of 0.15 m between rows and of 0.15 m between plants produce plants of higher quality and with greater productivity.

Performance of cultivars of crisp mini-lettuce with respect to ground cover and spacing, in three planting times

The planting of lettuce in greenhouses, as well as covering beds with a polyethylene sheet, is a viable technology, promoting improvements in microclimatic conditions of the environment. In view of the little information on mini-lettuce, the aim of this work was to evaluate the performance of three cultivars of crisp minilettuce ('Green Frizzly', 'Red Frizzly no. 1' and 'Red Frizzly no. 2') with and without ground cover, under different spacings (20 × 15 cm and 20 × 20 cm), in three planting times (1: November 16, 2004; 2: December 17, 2004; and 3: January 20, 2005). The study was conducted in a greenhouse at UNESP-FCAV, Jaboticabal-SP. The experiments were carried out using a randomized block design, following a 3 × 2 × 2 factorial scheme with 12 treatments and three repetitions. The characteristics evaluated were plant height (cm), head diameter (cm), fresh weight (g) and number of leaves per plant. Planting time 3 was shown to be favorable for all the characteristics analyzed. 'Red Frizzly no. 2' was found to be the most suited to planting time 1, and for planting times 2 and 3, this cultivar did not differ from 'Red Frizzly no. 1'. The factor ground cover was not found to affect the characteristics evaluated, and therefore, cultivation without ground cover is recommended. The spacing 20 × 15 cm was shown to be favorable, resulting in cultivation with the highest populations, thereby increasing productivity. Based on the results obtained and for the conditions in which the experiment was conducted, it can be concluded that: planting time 3 (January 20, 2005) was the most favorable; the cultivars 'Red Frizzly no. 2' and 'Red Frizzly no. 1' are adapted to all the planting times; and cultivation without ground cover using a spacing of 20 × 15 cm was the most suitable.

Qualidade estrutural de um latossolo vermelho submetido à compactação

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Programação, conexão e avaliação de psicrômetro aspirado de termopar de baixo custo em micrologger para estudos agrometeorológicos

As the psychrometric method is considered standard for the measurement of relative humidity, many studies have used aspirated thermocouple psychrometers connected to microloggers but, however, they do not detail how the aspiration of the air stream is done. However, one of the major difficulties of aspirated thermocouple psychrometers is to program and to connect it in micrologger, because specific programming and connection are requires, and still some skills in getting accurate measurements. This work aimed to provide the programming and the connection of the aspirated thermocouple psychrometer type T for the CR10X microloggers and CR23X of Campbell Scientific, evaluating the quality of measurements of temperature and air relative humidity in relation the a sensor Vaisala HMP50. The non-continuous measurements were made in the period 2006/09/04 to 2007/07/11 at Jaboticabal, SP. The air temperature measurements were similar between the Vaisala sensors and aspirated thermocouple psychrometer, but the relative humidity measurements were significantly different. The measurements obtained by the aspirated thermocouple psychrometer connected to CR10X micrologger were the most accurate. Using the programming and connection of a micro-fan to suck in the dry and moist bulbs of aspirated thermocouple psychrometer in microloggers models CR10X and CR23X, it is possible to obtain measurements of air temperature with good precision and accuracy, and measurements of air relative humidity with good precision, but accuracy is not always attainable due to the difficulties inherent to the physical processes that occur in the wet bulb, the skill in the use and maintenance of this equipment and the reservoir protection against radiative effects.

Nutrição e produtividade da nogueira-macadâmia em função de doses de nitrogênio

The objective of this work was to evaluate the influence of nitrogen doses on mineral nutrition and yield of macadamia nut (Macadamia integrifolia). The experiment was carried out during three agricultural years, in Jaboticabal, SP, Brazil. The experimental design was a complete block with four replicates. Five doses of N (0, 50, 100, 150, and 200 kg ha-1 per year), applied as urea, were evaluated. The increase in N doses increased the nutrient concentration in the leaves and the yield of nuts and almonds. Ca, Mg, and S contents decreased and the ones of Fe and Mg increased linearly with N fertilization. Nut and almond yields were positively correlated with leaf N concentration, and the range from 14 to 18 g kg-1 allowed the highest yields. The dose of 150 kg ha-1 of N per year provides higher nut yields, without reducing the recovery rate of almonds.

Spatial Distribution of Euschistus heros (F.) (Hemiptera: Pentatomidae) in Soybean

Soybean bugs are major crop pests that cause significant reduction in harvest yield and influence grain quality. The aim of this study was to verify the spatial distribution of Euschistus heros (F.) (Hemiptera: Pentatomidae) in conventional and transgenic soybean cultivars. The experiment was conducted during the 2010-2011 crop season in UNESP/FCAV, Jaboticabal, SP, Brazil, in two fields of 10,000-m2 area that were subdivided into 100 plots (10 m × 10 m). The cultivars sown were M 7908 RR and its isoline M-SOY 8001. The number of the first to fifth instars and the number of adults were determined. To evaluate insect dispersion in the area, the following indices were used: variance/mean ratio, Morisita index, Green coefficient, and the k exponent of the negative binomial distribution. To study probabilistic models to describe the spatial distribution of the insects, the adjustments of the Poisson and negative binomial distributions were tested. The first to third instars showed aggregated spatial distribution, whereas the fourth and fifth instars, and adults, isolated or grouped, showed variation in the arrangement, ranging from moderately aggregated to randomly dispersed. During the adjustment of probability distributions, the negative binomial distribution model showed adjustment for the first to third instars, fourth and fifth instars, adults, and fourth and fifth instars plus adults. © 2013 Sociedade Entomológica do Brasil.

Desempenho produtivo e qualidade pós-colheita de genótipos de feijão do grupo comercial carioca cultivados na época de inverno-primavera

The objective of this work was to evaluate the agronomic performance and grain quality, especially the grain technological characteristics in the common bean genotypes, cultivated in winter-spring season. The experiment was carried out in Jaboticabal-SP, in a Rhodic Hapludox. The experimental design was a randomized block with 17 treatments (genotypes) with three replications. The plots had been composed for 17 carioca common bean group genotypes (Pérola, BRS Cometa, BRS Pontal, IPR Juriti, CNFC 10703, CNFC 10713, CNFC 10716, CNFC 10721, CNFC 10729, CNFC 10733, CNFC 10742, CNFC 10753, CNFC 10757, CNFC 10758, CNFC 10762, CNFC 10763 and CNFC 10813). BRS Pontal and CNFC 10716 showed simultaneously the higher number of per plant and grain yield. The technological characteristics more expressive was verified in CNFC 10703, CNFC 10713, CNFC 10758, CNFC 10813 and CNFC 10716 genotypes, principally about the protein content, cooking time and grain hydration capacity. The CNFC 10716 genotype detached as promissory, because their elevated agronomic performance and satisfactory technological characteristics.

Formas de aplicación de zinc para las plantas de maíz que crecen en Oxisol: Efectos sobre el suelo, la nutrición de las plantas y la productividad

The way of applying zinc can influence the zinc uptake and productivity of crops, especially cereals that have high demand for this nutrient. The aim of this study is to evaluate methods of Zn application on soil, nutritional status and productivity of maize. For this, an experiment was undertaken at FCAV/UNESP, Jaboticabal-SP, in Oxisol clay (DTPA on Zn: 0.5 mg dm-3) with maize (hybrid Simple Impact), from December through May 2009. Nine treatments with three doses of Zn in soil banded application (in furrows) and three doses of Zn by incorporation in soil (0-20 cm depth), foliar application, seed application and control (no Zn). The treatments were arranged in a randomized block design with four replications. Regardless of the method, Zn application promoted higher contents of this micronutrient in soil and higher accumulation in the shoots as well as increasing Zn in the maize grain. However, it did not affect the nutritional status and yield of the maize. The Zn application in the soil resulted in a greater Zn uptake by plants and maize yield, compared to Zn application in the plant by seed or foliar.

Utilização de macrófitas aquáticas flutuantes no tratamento de efluentes de carcinicultura

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Indução à reprodução e desenvolvimento embrionário e larval do ciclídeo acará-açu Astronotus ocellatus (Agassiz, 1831)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Capacidade de retenção e dinâmica de um wetland construído no tratamento de águas residuais

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Dinâmica da qualidade da água em tanques de peixes de sistema pesque-pague: aspectos físico-químicos e plâncton

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Caracterização da reprodução de Astyanax fasciatus durante a domesticação

Pós-graduação em Aquicultura - FCAV

Caracterização hidráulica do microaspersor Eden Twister em posição normal e invertida

Pós-graduação em Agronomia (Ciência do Solo) - FCAV

Atributos de latossolos e produtividade da cana-de-açúcar em decorrência da diversificação de culturas no período de reforma do canavial

Pós-graduação em Agronomia (Ciência do Solo) - FCAV