Mineralogy of ODP Site 105-645

Cores from the upper 70 meters below seafloor (mbsf) (upper Pleistocene) at Ocean Drilling Program (ODP) Site 645 in Baffin Bay show dramatic meter-scale changes in color and mineralogy. Below this interval, mineralogical changes are more gradual to the top of the Miocene at about 550 mbsf. The Pliocene-Pleistocene section can be divided into five facies: Facies 1 - massive, poorly sorted, gravel-bearing muds; Facies 2 - gray silty clays and silty muds; Facies 3 - laminated detricarbonate silty muds; Facies 4 - silty sand and sandy silt; and Facies 5 - poorly sorted muddy sands and silty muds. Facies 4 and 5 are restricted to the Pliocene section below depths of about 275 mbsf. The mineralogical/color cycles in the upper 70 mbsf are the result of alternations between Facies 2 and three lithotypes of Facies 1: lithotype A - tan-colored, carbonate-rich, gravel-bearing mud; lithotype B - weak, red-colored, gravel-bearing mud rich in sedimentary rock fragments; and lithotype C - gray, gravel-bearing mud. A fourth lithotype, D, is restricted to depths of 168-275 mbsf and is dark gray, carbonate-poor, gravel-bearing mud. We believe that all lithotypes of Facies 1 and the sand and gravel fractions of Facies 2 and 3 were deposited by ice rafting. Depositional processes for Facies 4 and 5 probably include ice rafting and bottom- and turbidity-current transport. Data from petrographic analyses of light and heavy sand-sized grains and X-ray analyses of silt- and clay-size fractions suggest that tan-colored sediments (lithotype A of Facies 1; Facies 3) were derived mainly from Paleozoic carbonates of Ellesmere, Devon, and northern Baffin islands. Weak red sediments (lithotype B) contain significant red sedimentary clasts, reworked quartzarenite grains and clasts, and rounded colorless garnets, all derived from Proterozoic sequences of the Borden and Thule basins, and from minor Mesozoic red beds. Other sediments in the upper 335 mbsf at Site 645 contain detritus from a heterogeneous mixture of sources, including Precambrian shield terranes around Baffin Bay. Sediments from 335 to 550 mbsf (Facies 5) are rich in friable sedimentary clasts and detrital micas and contain glauconite and, in a few samples, reworked diatoms. These components suggest derivation from poorly consolidated Mesozoic-Tertiary sediments in coastal outcrops and beneath the modern shelves of northeastern Baffin Island and western Greenland. For the upper Pleistocene section (about 0-100 mbsf), marked mineralogical cyclicity is attributed to fluctuating glacial margins, calving rates, and iceberg melting rates, particularly around the northern end of Baffin Bay. Tan-colored, carbonate-rich units were derived at times of maximum advance of glaciers on Ellesmere and Devon islands, during relatively warm intervals induced by incursion of warm Atlantic surface water into the bay. At the beginning of these warmer episodes, most icebergs were contributed by glaciers near sea level around the Arctic channels, which resulted in deposition of weak red, ice-rafted units rich in Proterozoic sedimentary clasts.

Ages, lithologie descriptions and mineral analyses from different DSDP holes in the Indian Ocean

The present work is based on mineralogical studies of sand and silt layers from a number of Deep Sea Drilling Project sites in the Indian Ocean belonging to different physiographic provinces of different ages. The minerals can be grouped into two major associations: a hornblende-opaque association with varying amounts of pyroxene, garnet, epidote, zircon, etc. and a biotite-chlorite-muscovite assemblage. The dominance of unstable minerals indicates a first generation, though evidence of reworking is reflected in the zircon and tourmaline grains at some sites. A large variety of minerals at some sites indicates a complex source. The mineral composition is nearly homogeneous at different sites for the entire length of the core, indicating that they have been derived from the same source during the deposition of that interval. However, the provenance changed by tectonic activity, the effect of which has been reflected in the mineralogy of some sites. An attempt was made to describe the mineralogic characteristics and their tectonic interpretations in the Pliocene and Miocene periods in the Ganges and Indus fan sites and also in the Wharton and Mozambique basin sites. Similar attempts could not be made for other ages in other physiographic provinces as the numbers of samples were too few. Within the limited scope, some idea about the mineralogical character of different basins and different physiographic provinces can be obtained from the present study. Mineralogical evidence also suggests very long transport of sediments in the deep sea. Regional variation of mineralogy has resulted due to source, sea-floor configuration, selective removal, reworking by different agencies and the processes operating in the ocean. There is no relation between a particular age and a set mineral assemblage for the Cenozoic sediments of the Indian Ocean.

Mud, sand, heavy and light minerals composition in lower Cretaceous at DSDP Hole 93-603B

During the drilling of Hole 603B on Deep Sea Drilling Project Leg 93, an unexpected series of sand-, silt-, and claystone turbidites was encountered from Cores 603B-45 through -76 (1224-1512 m sub-bottom depth). Complete and truncated Bouma sequences were observed, some indicating deposition by debris flows. Sand emplacement culminated with the deposition of a 30-m-thick, unconsolidated sand unit (Cores 603B-48 through -45). The purpose of this preliminary study is to determine the nature of the heavy mineral suites of this sediment in order to make tentative correlations with onshore equivalents. The heavy mineralogy of Lower Cretaceous North American mid-Atlantic coastal plain sediment has been extensively studied. This sediment is classified as the Potomac Group, which has a varied heavy mineral suite in its lower part (Patuxent Formation), and a limited suite in its upper part (Patapsco Formation). The results of this study reveal a similar trend in the heavy mineral suites of sediment in Hole 603B. Hauterivian through lower Barremian sediment has a heavy mineral suite that is dominated by zircon, apatite, and garnet, with minor amounts of staurolite and kyanite. Beginning in the mid-Barremian, a new source of sediment becomes dominant, one which supplies an epidote-rich heavy mineral suite. The results of the textural analyses show that average grain size of the light mineral fraction increases upsection, whereas sorting decreases. The epidote-rich source may have delivered sediment with a slightly coarser mean grain size. This sediment may represent a more direct continental input at times of maximum turbidite activity (mid-Barremian) and during deposition of the upper, unconsolidated sand unit.

Coarse-fraction composition in sediments of ODP Leg 104

Coarse-fraction studies of sediments recovered during ODP Leg 104 are used to reconstruct paleoclimatic and paleoceanographic environments on a time scale of 0.1 to 0.5 m.y. for the past 20 Ma. These investigations suggest that relatively warm climates and isolated deep water conditions prevailed prior to 13.6 Ma and between 5.6-4.8 Ma. The first major deep water outflow from the Norwegian-Greenland Sea into the North Atlantic took place at about 13.6 Ma. Progressive cooling linked to increased deep water renewal in the Norwegian-Greenland Sea appears to have occurred between 13.6-5.6 Ma and 4.8-3.1 Ma. A major onset of ice-rafted debris is recorded at 2.56 Ma. Terrigenous coarsefraction components show important fluctuations with two major peaks during the past 0.8 Ma.

Description and geochemical composition of tephra layers from ODP Hole 186-1150A and Site 186-1151

The sediments collected at Sites 1150 and 1151 during Leg 186 included many tephra layers and volcaniclastic detritus. In order to identify these tephras, the major oxide compositions of individual glass shards were determined by electron probe microanalyzer. The uppermost four tephras in sediments from Hole 1150A are correlated with the Towada-Hachinohe tephra (To-H; Tohoku district), Shikotsu Daiichi (1st) tephra (Spfa-1; Hokkaido district), Narugo-Yanagisawa tephra (Nr-Y; Tohoku district), and Aso-4 tephra (Kyushu district), respectively. The uppermost tephra in Hole 1151C is correlated with To-H tephra. To-H, Spfa-1, and Aso-4 tephras are also present in piston core KH94-3, LM-8, collected between Sites 1150 and 1151. Eruptive ages of To-H and Spfa-1 estimated from the oxygen isotopic Stages of core KH94-3, LM-8 are between 14.9-15.3 and 39.5-40.1 ka.

Processing results from drill hole VNIIO-1988-Sht-01 on the shelf of the Barents Sea (Report 6404, Murmansk)

Interareal correlation has been carried out; composition of the deposits has been determined; sections recovered by marine drilling have been compared; reconstructed paleogeographic conditions confirm previous views on Jurassic and Cretaceous sedimentation in the area: 1. Determinate changes of continental and shallow marine mainly sandy Middle Jurassic deposits by sandy-clayey marine ones to the north and west occur. This indicates similar direction of clastic material migration and converse direction of Jurassic marine transgressions. 2. Increase of sand contents in the deposits also to the east and to the southeast indicates an important source of clastic material. It can result from incipience and development of the epiplatform orogen of Novaya Zemlya - Pai-Khoi in the Late Triassic - Early Jurassic. 3. Compositional and facial changes as well as changes in thicknesses of some Early Cretaceous lithologic-stratigraphic complexes indicate fast change of terrigenous material transport from the north to the south - south-east in the Late Valanginian - Hauterivian. Besides within the South Barents Sea region up to the Shtokman area there occurs weak variability in lithologic parameters of Neocomian avandeltaic deposits and turbidites composed of clays, claystones, and clayey siltstones. Correlation of drilling sections from the Shtokman area and from the South Basin of the Barents Sea together with paleotectonic analysis result to the conclusion about significant structure-forming movements in the Late Jurassic - Early Neocomian. During this time there occurred maximal growth of the Shtokman structure and likely of many other structures belonging to the South Basin of the Barents Sea.

Mineral composition of 356 sediment profiles from the Arctic seas

This data set contains the mineralogical analyses (binocular counting) of the 100-50 µm grain size fraction from bottom sediments collected by scientists of the V.P. Zenkovich Laboratory of Shelf and Sea Coasts (P.P. Shirshov Institute of Oceanology, Russian Academy of Sciences) during the Project ''Arctic Shelf of the Eurasia in the Late Quaternary'' in a number of expeditions to the Barents, Kara, East Siberian and Chukchi Seas on board research vessels R/V Professor Shtokman, H/V Dmitry Laptev, H/V Malygin, and icebreaker Georgy Sedov between 1978 and 1990. The analyses have been carried out according to the methods published by Petelin V.P. (1961) in the Analytical Laboratory of the P.P. Shirshov Institute of Oceanology. Archiving and electronic publication was performed through a data rescue by Evgeny Gurvich in 2003.

¿Qué Método Utilizar Para Estimar la Temperatura estática de una formación de Petróleo?

Conocer la temperatura estática de una formación de petróleo es importante a la hora de evaluar y terminar un pozo. Existe una gran variedad de métodos para la determinación de esta temperatura. Cada método utiliza hipótesis y simplificaciones distintas que llevan a estimaciones diferentes, en algunos casos bastante alejadas del valor real. Esto hace difícil saber qué método utilizar. En este trabajo, se aplican los métodos de cálculo más comunes - Horner (HM), flujo radial y esférico (SRM), de las dos medidas (TLM) y de fuente de calor cilíndrica (CSM)- a cuatro pozos distintos. Se describe cómo aplicarlos en casos reales. Se presta especial atención a establecer los datos necesarios en cada caso: propiedades termo-físicas y número de medidas, y se proporcionan criterios para estimarlos en caso de no conocer su valor real. Como conclusiones a este trabajo se presentan una serie de pautas que permiten seleccionar el método de cálculo más conveniente en función de la información de que se disponga