Avaliação da disseminação de Salmonella Senftenberg isoladas de diversos ambientes avícolas utilizando a técnica de Pulsed Field Gel Electrophoresis

Pós-graduação em Microbiologia - IBILCE

Transverse changes after surgically assisted rapid palatal expansion

The aim of this retrospective study was to investigate the amount of skeletal and dental expansion in patients submitted to surgically assisted rapid palatal expansion (SARPE). The sample consisted of 21 patients (14 female and seven male) with a mean age of 25.4 years (range 17.4-41.8 years). Postero-anterior (PA) cephalograms were taken pre-expansion (T1), immediately after expansion (T2), and at post-expansion retention of 120 days (T3). SARPE promoted significant transverse skeletal changes, which were maintained from T2 to T3. Dentoalveolar expansion and dental tipping were also observed in the region of the first molars and first premolars; however the net effect at the first molars was significantly less than that at the first premolars. No statistically significant effect on the width of the nasal cavity was observed. The findings indicate that peculiarities inherent to dental effects may influence the clinical options for SARPE. Skeletal expansions with SARPE were significant and stable. Dental changes were different between molars and premolars. The transverse changes after SARPE should be observed for future procedures related to the retention and the completion of orthodontic treatment.

Ultrastructural features of spermatogenesis in Melanorivulus punctatus (Cyprinodontiformes: Rivulidae)

Fish belonging to the family Rivulidae possess one of the most complex reproductive systems. Rivulus, a genus of freshwater fish in the Rivulidae family, was recently reclassified into five genera, including Melanorivulus. Its type species, M. punctatus, is widely distributed and probably represents a species complex. The ultrastructure of sperm has been broadly used in systematics, and we hereby describe the ultrastructural features of spermatogenesis in M. punctatus. Ten M. punctatus males were collected from the reservoir of Parque Estadual da Quineira, municipality of Chapada dos Guimardes, Mato Grosso, Brazil, and prepared for analysis by light microscopy and transmission electron microscopy. M. punctatus undergoes cystic spermatogenesis. Its cysts consist of groups of germ cells that are in synchronous development and are surrounded by cytoplasmic projections of Sertoli cells. With the breakdown of the cysts, the spermatozoa are released and their maturation is completed in the duct, where part of the cytoplasmic material is discarded through the vesicles. The mature spermatozoon is characterized by a spherical head with homogeneously condensed chromatin, a symmetric midpiece consisting of a pair of perpendicular centrioles, a ring of mitochondria, several vesicles, and one flagellum medial to the nucleus. Early stages of spermatogenesis show no peculiarities; however, in spermiogenesis, we observed that the spermatids remain interconnected by cytoplasmic bridges and have pockets of residual cytoplasm. The sperm is of the aquasperm type and is similar to that observed in the members of the family Rivulidae. The spermatozoa have a single flagellum that consists of a classic axoneme (9 +2), as found in most groups of fish, despite the lateral extensions. (c) 2014 Elsevier Ltd. All rights reserved.

A aplicação da distribuição exponencial geométrica estendida para modelagem de dados pluviométricos

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Comparação da composição bioquímica do líquido amniótico equino colhido em diferentes estágios gestacionais e no momento do parto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Characteristics and associated factors with sports injuries among children and adolescents

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Transtorno de déficit de atenção e hiperatividade: a medicalização e a coação no desenvolvimento moral

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

As interconexões entre a gestão da informação e a gestão do conhecimento para o gerenciamento dos fluxos informacionais

Discusses the interconnections between information management and knowledge management for themanaging of information flows. Starting at a literature review to obtain a grounding that allows clarifythis question. Presents the peculiarities involving the formal flows management [informationmanagement] and informal flows management [knowledge management], as well as factors thatprovide a better understanding in regard to the focus of information management and knowledgemanagement. The efficient information flows management demands the need to deploy the informationand knowledge management to its true effectiveness. We can see that these two modes of managementare interrelated such that, in the absence of a, the other is affected, directly impacting the informationflows management and thus in the organization capacity to create knowledge and make decisions withcompetitive differential.

Influência de fatores individuais, organizacionais e relativos ao trabalho na adesão às precauções padrão

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Famílias com gêmeos: um estudo sobre o relacionamento fraterno e a dinâmica das relações familiares

Pós-graduação em Psicologia do Desenvolvimento e Aprendizagem - FC

Combined active and semi-supervised learning using particle walking temporal dynamicscombined active and semi-supervised learning using particle walking temporal dynamics

Both Semi-Supervised Leaning and Active Learning are techniques used when unlabeled data is abundant, but the process of labeling them is expensive and/or time consuming. In this paper, those two machine learning techniques are combined into a single nature-inspired method. It features particles walking on a network built from the data set, using a unique random-greedy rule to select neighbors to visit. The particles, which have both competitive and cooperative behavior, are created on the network as the result of label queries. They may be created as the algorithm executes and only nodes affected by the new particles have to be updated. Therefore, it saves execution time compared to traditional active learning frameworks, in which the learning algorithm has to be executed several times. The data items to be queried are select based on information extracted from the nodes and particles temporal dynamics. Two different rules for queries are explored in this paper, one of them is based on querying by uncertainty approaches and the other is based on data and labeled nodes distribution. Each of them may perform better than the other according to some data sets peculiarities. Experimental results on some real-world data sets are provided, and the proposed method outperforms the semi-supervised learning method, from which it is derived, in all of them.

Processing and characterization of ablative composites used in rocket motors

The main objective of this research work was to obtain two formulations of ablative composites. These composites are also known as ablative structural composites, for applications in atmospherically severe conditions according to the high-temperature, hot gaseous products flow generated from the burning of solid propellants. The formulations were manufactured with phenolic resin reinforced with chopped carbon fiber. The composites were obtained by the hot compression molding technique. Another purpose of this work was to conduct the physical and chemical characterization of the matrix, the reinforcements and the composites. After the characterization, a nozzle divergent of each formulation was manufactured and its performance was evaluated through the rocket motor static firing test. According to the results found in this work, it was possible to observe through the characterization of the raw materials that phenolic resins showed peculiarities in their properties that differentiate one from the other, but did not exhibit significant differences in performance as a composite material for use in ablation conditions. Both composites showed good performance for use in thermal protection, confirmed by firing static tests (rocket motor). Composites made with phenolic resin and chopped carbon fiber showed that it is a material with excellent resistance to ablation process. This composite can be used to produce nozzle parts with complex geometry or shapes and low manufacturing cost.

Biological studies of puccina species using germinatelia

Despite the importance of plant pathogens belonging to the Order Pucciniales (=Uredinales), popularly called rusts, certain peculiarities of its biology is poorly known, mainly due to the difficulty of growing them in culture media and also by the lack of appropriate methodologies for the development of research. Therefore, this study was to verify the efficiency of apparatus called germinatelia to obtain data about the basidiospores production biology of different Pucciniales species. Were used in the study Puccinia pampeana, P. psidii, P. pelargonii-zonalis, P. arachidis, P. mogiphanis, P. emiliae, P. hetereospora, P. malvacearum and P. cnici-oleracei. The use of germinatelia have revealed high basidiospores production for a period up to 5 months at temperatures between 12 degrees and 21 degrees C. Furthermore, in P. malvacearum was possible to record the germination by repetition (survival strategy) in 4.5% of basidiospores produced. All species were favored to mild temperatures. These results therefore demonstrate that the use of germinatelios is efficient, assisting in obtaining data about the biology and cycles of different Puccinia species, enabling better understanding of these pathogens, resulting in management and control measures most appropriate/accurate.

Educação a distância online

This work includes an analysis about the distance learning Online. By bibliographic researches were was observed some Distance Learning peculiarities in Brazil, since its implementation until the present days. Was considered aspects of activities the teachers, main problems, advantages, needed resources for implementation the distance learning course and the approach on a virtual learning environment. (TelEduc) The text was written from books, articles and web pages related to Online distance learning in order to provide the reader an overview of this teaching modality increasingly growing in Brazil

Revisitando a dicotomia fala/escrita

This work has by main objective revisit the dichotomy speech/writing from the perspective of scholars in the field of linguistics in relation to the communicative and interactional aspects of language. The research is based on the study of traditional dichotomies that classically distinguish between the oral form and the written form of the language. It is noted here the importance of the study of communication and interaction of individuals, as language being the main aspect responsible for the organization of society, and, of course, also being indispensable for the development of human being. This study shows that the distinctive peculiarities between speech and writing are not of the characteristics of a particular procedure, but differences that are necessary due to the specific moment of creation of an utterance or text, because both the oral and the mode writing may have traces of formality/informality; completeness/incompleteness, among other things. In other words, there is not a distinctive feature that is present only in speech or writing. Thus, this research shows that, by the numberless technological advances, the communication between people has gone through changes and crossed barriers. Therefore, it is clear that with the collaboration of the media, the old dichotomies recommended for speech and writing are being overcome and can no longer be treated strictly to any of the modalities