Biomechanical force displacement analysis of strength of fixation of tracker holding devices to bone in computer aided joint replacement

Computer aided joint replacement surgery has become very popular during recent years and is being done in increasing numbers all over the world. The accuracy of the system depends to a major extent, on accurate registration and immobility of the tracker attachment devices to the bone. This study was designed to asses the forces needed to displace the tracker attachment devices in the bone simulators. Bone simulators were used to maintain the uniformity of the bone structure during the study. The fixation devices tested were 3mm diameter self drilling, self tapping threaded pin, 4mm diameter self tapping cortical threaded pin, 5mm diameter self tapping cancellous threaded pin and a triplanar fixation device ‘ortholock’ used with three 3mm pins. All the devices were tested for pull out, translational and rotational forces in unicortical and bicortical fixation modes. Also tested was the normal bang strength and forces generated by leaning on the devices. The forces required to produce translation increased with the increasing diameter of the pins. These were 105N, 185N, and 225N for the unicortical fixations and 130N, 200N, 225N for the bicortical fixations for 3mm, 4mm and 5mm diameter pins respectively. The forces required to pull out the pins were 1475N, 1650N, 2050N for the unicortical, 1020N, 3044N and 3042N for the bicortical fixated 3mm, 4mm and 5mm diameter pins. The ortholock translational and pull out strength was tested to 900N and 920N respectively and still it did not fail. Rotatory forces required to displace the tracker on pins was to the magnitude of 30N before failure. The ortholock device had rotational forces applied up to 135N and still did not fail. The manual leaning forces and the sudden bang forces generated were of the magnitude of 210N and 150N respectively. The strength of the fixation pins increases with increasing diameter from three to five mm for the translational forces. There is no significant difference in pull out forces of four mm and five mm diameter pins though it is more that the three mm diameter pins. This is because of the failure of material at that stage rather than the fixation device. The rotatory forces required to displace the tracker are very small and much less that that can be produced by the surgeon or assistants in single pins. Although the ortholock device was tested to 135N in rotation without failing, one has to be very careful not to put any forces during the operation on the tracker devices to ensure the accuracy of the procedure.

Estimating total cross sections from neutron-nucleus collisions using a simple functional form

Total cross sections for neutron scattering from nuclei, with energies ranging from 10 to 600 MeV and from many nuclei spanning the mass range 6Li to 238U, have been analyzed using a simple, three-parameter, functional form. The calculated cross sections are compared with results obtained by using microscopic (g-folding) optical potentials as well as with experimental data. The functional form reproduces those total cross sections very well. When allowance is made for Ramsauer-like effects in the scattering, the parameters of the functional form required vary smoothly with energy and target mass. They too can be represented by functions of energy and mass.

Digital storytelling, podcasts, blogs and vlogs : exploring a range of new media texts and forms in English

Curriculum initiatives in Australia emphasise the use of technologies and new media in classrooms. Some English teachers might fear this deployment of technologies because we are not all ‘digital natives’ like our students. If we embrace new media forms such as podcasts, blogs, vodcasts, and digital stories, a whole new world of possibilities open up for literary response and recreative texts, with new audiences and publication spaces. This article encourages English teachers to embrace these new digital forms and how shows we can go about it.

Theory and its role in mathematics education

The increased recognition of the theory in mathematics education is evident in numerous handbooks, journal articles, and other publications. For example, Silver and Herbst (2007) examined ―Theory in Mathematics Education Scholarship‖ in the Second Handbook of Research on Mathematics Teaching and Learning (Lester, 2007) while Cobb (2007) addressed ―Putting Philosophy to Work: Coping with Multiple Theoretical Perspectives‖ in the same handbook. And a central component of both the first and second editions of the Handbook of International Research in Mathematics Education (English, 2002; 2008) was ―advances in theory development.‖ Needless to say, the comprehensive second edition of the Handbook of Educational Psychology (Alexander & Winne, 2006) abounds with analyses of theoretical developments across a variety of disciplines and contexts. Numerous definitions of ―theory‖ appear in the literature (e.g., see Silver & Herbst, in Lester, 2007). It is not our intention to provide a ―one-size-fits-all‖ definition of theory per se as applied to our discipline; rather we consider multiple perspectives on theory and its many roles in improving the teaching and learning of mathematics in varied contexts.

Introducing Engineering Education in the Middle School

This paper first describes a new three-year, longitudinal project that is implementing engineering education in three middle schools in Australia (grade levels 7-9). This important domain is untapped in Australia. Hence, as a starting point, we conducted a context analysis to help situate engineering education in a school system. We report on this analysis with respect to findings from one of two literature-based surveys that gathered middle-school student responses in mathematics (n=172) and science (n=166) towards understanding their dispositions for engineering education. ANOVA indicated gender differences for 3 out of 23 items in both mathematics and science. In addition, the majority of students agreed or strongly agreed with 17 of the 23 survey items, however, there were some differences between mathematics and science. We conclude the paper with some recommendations for establishing engineering education in schools, including the development of partnerships among engineering and education faculties, school systems, and industry to develop contemporary engineering resources to support school-level mathematics, science, and technology.

Future directions and perspectives for problem solving research and curriculum development

Since the 1960s, numerous studies on problem solving have revealed the complexity of the domain and the difficulty in translating research findings into practice. The literature suggests that the impact of problem solving research on the mathematics curriculum has been limited. Furthermore, our accumulation of knowledge on the teaching of problem solving is lagging. In this first discussion paper we initially present a sketch of 50 years of research on mathematical problem solving. We then consider some factors that have held back problem solving research over the past decades and offer some directions for how we might advance the field. We stress the urgent need to take into account the nature of problem solving in various arenas of today’s world and to accordingly modernize our perspectives on the teaching and learning of problem solving and of mathematical content through problem solving. Substantive theory development is also long overdue—we show how new perspectives on the development of problem solving expertise can contribute to theory development in guiding the design of worthwhile learning activities. In particular, we explore a models and modeling perspective as an alternative to existing views on problem solving.

Methodologies for investigating relationships between concept development and the development of problem solving abilities

This paper is the second in a pair that Lesh, English, and Fennewald will be presenting at ICME TSG 19 on Problem Solving in Mathematics Education. The first paper describes three shortcomings of past research on mathematical problem solving. The first shortcoming can be seen in the fact that knowledge has not accumulated – in fact it has atrophied significantly during the past decade. Unsuccessful theories continue to be recycled and embellished. One reason for this is that researchers generally have failed to develop research tools needed to reliably observe, document, and assess the development of concepts and abilities that they claim to be important. The second shortcoming is that existing theories and research have failed to make it clear how concept development (or the development of basic skills) is related to the development of problem solving abilities – especially when attention is shifted beyond word problems found in school to the kind of problems found outside of school, where the requisite skills and even the questions to be asked might not be known in advance. The third shortcoming has to do with inherent weaknesses in observational studies and teaching experiments – and the assumption that a single grand theory should be able to describe all of the conceptual systems, instructional systems, and assessment systems that strongly molded and shaped by the same theoretical perspectives that are being used to develop them. Therefore, this paper will describe theoretical perspectives and methodological tools that are proving to be effective to combat the preceding kinds or shortcomings. We refer to our theoretical framework as models & modeling perspectives (MMP) on problem solving (Lesh & Doerr, 2003), learning, and teaching. One of the main methodologies of MMP is called multi-tier design studies (MTD).

A Malaysian tale : pre-service teacher education and ICT integration for a better world

The use of Information and Communication Technologies (ICT) in education is often a topic of much discussion within all sectors of education with educators and educational researchers continually looking for innovative ways of using these technologies to support and enhance student outcomes in education. Consequently, Malaysia is no exception to this and as the Ministry of Education (MOE), Malaysia strives to meet its government’s Vision 2020, educational reform across all educational sectors has become imperative. ICT will play an integral role in the educational reform process and teacher education programs are no exception to this. ICT and capacity building will play an important role in the re-conceptualisation of teacher education programs. This paper reports on how a collaborative capacity building project between two Malaysian teacher education Institutes and an Australian University has given lecturers and pre-service teachers an opportunity to redefine their use of ICT in their prospective teaching areas of science, mathematics and design and technology. It also highlights the positive capacity building programs that occurred between both Australian university lecturers and Malaysian Institute lecturers and how this contributed to the effective integration and use of ICT.

Self-commutated current source converter with multi-level current reinjection

The multi-level current reinjection concept described in literature is well-known to produce high quality AC current waveforms in high power and high voltage self-commutating current source converters. This paper proposes a novel reinjection circuitry which is capable of producing a 7-level reinjection current. It is shown that this reinjection current effectively increases the pulse number of the converter to 72. The use of PSCAD/EMTDC simulation validates the functionality of the proposed concept illustrating its effectiveness on both AC and DC sides of the converter.

Developing a rural land investment performance index for New Zealand

Agricultural production is one of the major industries in New Zealand and accounts for over 60% of all export trade. The farming industry comprises 70,000 entities ranging in size from small individual run farms to large corporate operations. The reliance of the New Zealand economy to the international rural sector has seen considerable volatility in the rural land markets over the past four decades, with significant shifts in rural land prices based on location, land use and underlying international rural commodity prices. With the increasing attention being paid to the rural sector, especially in relation to food production and bio-fuels, there has been an increasing corporate interest in rural land ownership in relatively low subsidised agricultural producing countries such as New Zealand and Australia. A factor that has limited this participation of institutional investors previously has been a lack of reliable and up-to-date investment performance data for this asset class. This paper is the initial starting phase in the development of a New Zealand South Island rural land investment performance index and covers the period 1990-2007. The research in this paper analyses all rural sales transactions in the South Island and develops a capital return index for rural property based on major rural property land use. Additional work on this index will cover both total return performance and geographic location.

Using digital storytelling to capture responses to the Apology

This article discusses a pilot project that adapted the methods of digital storytelling and oral history to capture a range of personal responses to the official Apology to Australia’s Indigenous Peoples delivered by Prime Minister Kevin Rudd on 13 February 2008. The project was an initiative of State Library of Queensland and resulted in a small collection of multimedia stories, incorporating a variety of personal and political perspectives. The article describes how the traditional digital storytelling workshop method was adapted for use in the project, and then proceeds to reflect on the outcomes and continuing life of the project. The article concludes by suggesting that aspects of the resultant model might be applied to other projects carried out by cultural institutions and community-based media organizations.

Innovation implementation effectiveness : a multiorganizational test of Klein Conn and Sorra’s model.

In an empirical test and extension of Klein Conn and Sorra’s model of innovation implementation effectiveness, we apply structural equation modelling to identify the generalizability of their data-modified model in comparison with their theorised model. We examined the implementation of various types of innovations in a sample of 135 organizations. We found that the data supported the original model rather than the data-modified model, such that implementation climate mediated polices and practices and implementation effectiveness, while implementation effectiveness partially mediated the relationship between implementation climate and innovation effectiveness. Furthermore, we extend their model to suggest that non-financial resources availability plays a critical role in implementation policies and practices.

Does occupational stress really matter? A study of psychological climate and stress on job satisfaction in Thailand

This study explored the prediction of psychological climate and stresses on job satisfaction in non U.S. setting. A total of 450 surveys were sent to 11 organisations in Thailand and employees were asked to fill out the survey. The first hypothesis that positive psychological climate dimensions predicted lower level of stresses among Thai employees was partially accepted. Further regression analysis tested second hypothesis that positive psychological climate dimensions and low level of stresses predict job satisfaction among Thai employees. Contrary to expectation, only stress variables predicted job satisfaction. Thai culture influence was discussed.

Reflection on the 'Landscapes of Rights' Conference, Adelaide, 2009

This article presents a reflective view of three teaching colleagues from Queensland University of Technology, Brisbane who had attended and participated in the 'Landscapes of Rights' Conference in Adelaide, July 2009. The conference is a biennial event run by the Reggio Emilia-Australia Information Exchange. The authors explore and reflect on the provocations posed throughout this conference and consider these in light of their ongoing work in the field of teacher education, of early childhood teaching and as active supporters of children's rights.

The role of timber plantations in UK Investment portfolios

Although timber plantations and forests are classified as forms of agricultural production, the ownership of this land classification is not limited to rural producers. Timber plantations and forests are now regarded as a long-term investment with both institutional and absentee owners. While the NCREIF property indices have been the benchmarks for the measurement of the performance of the commercial property market in the UK, for many years the IPD timberland index has recently emerged as the U.K. forest and timberland performance indicator. The IPD Forest index incorporates 126 properties over five regions in the U.K. This paper will utilise the IPD Forestry Index to examine the performance of U.K. timber plantations and forests over the period 1981-2004. In particular, issues to be critically assessed include plantation and forest performance analysis, comparative investment analysis, and the role of plantations and forests in investment portfolios, the risk reduction and portfolio benefits of plantations and forests in mixed-asset portfolios and the strategic investment significance of U.K. timberlands.