Economics of Using Calcium Chloride vs. Sodium Chloride for Deicing/Anti-Icing, TR-488, 2008

The use of chemicals is a critical part of a pro-active winter maintenance program. However, ensuring that the correct chemicals are used is a challenge. On the one hand, budgets are limited, and thus price of chemicals is a major concern. On the other, performance of chemicals, especially at lower pavement temperatures, is not always assured. Two chemicals that are used extensively by the Iowa Department of Transportation (Iowa DOT) are sodium chloride (or salt) and calcium chloride. While calcium chloride can be effective at much lower temperatures than salt, it is also considerably more expensive. Costs for a gallon of salt brine are typically in the range of $0.05 to $0.10, whereas calcium chloride brine may cost in the range of $1.00 or more per gallon. These costs are of course subject to market forces and will thus change from year to year. The idea of mixing different winter maintenance chemicals is by no means new, and in general discussions it appears that many winter maintenance personnel have from time to time mixed up a jar of chemicals and done some work around the yard to see whether or not their new mix “works.” There are many stories about the mixture turning to “mayonnaise” (or, more colorfully, to “snot”) suggesting that mixing chemicals may give rise to some problems most likely due to precipitation. Further, the question of what constitutes a mixture “working” in this context is a topic of considerable discussion. In this study, mixtures of salt brine and calcium chloride brine were examined to determine their ice melting capability and their freezing point. Using the results from these tests, a linear interpolation model of the ice melting capability of mixtures of the two brines has been developed. Using a criterion based upon the ability of the mixture to melt a certain thickness of ice or snow (expressed as a thickness of melt-water equivalent), the model was extended to develop a material cost per lane mile for the full range of possible mixtures as a function of temperature. This allowed for a comparison of the performance of the various mixtures. From the point of view of melting capacity, mixing calcium chloride brine with salt brine appears to be effective only at very low temperatures (around 0° F and below). However, the approach described herein only considers the material costs, and does not consider application costs or other aspects of the mixture performance than melting capacity. While a unit quantity of calcium chloride is considerably more expensive than a unit quantity of sodium chloride, it also melts considerably more ice. In other words, to achieve the same result, much less calcium chloride brine is required than sodium chloride brine. This is important in considering application costs, because it means that a single application vehicle (for example, a brine dispensing trailer towed behind a snowplow) can cover many more lane miles with calcium chloride brine than with salt brine before needing to refill. Calculating exactly how much could be saved in application costs requires an optimization of routes used in the application of liquids in anti-icing, which is beyond the scope of the current study. However, this may be an area that agencies wish to pursue for future investigation. In discussion with winter maintenance personnel who use mixtures of sodium chloride and calcium chloride, it is evident that one reason for this is because the mixture is much more persistent (i.e. it stays longer on the road surface) than straight salt brine. Operationally this persistence is very valuable, but at present there are not any established methods to measure the persistence of a chemical on a pavement. In conclusion, the study presents a method that allows an agency to determine the material costs of using various mixtures of salt brine and calcium chloride brine. The method is based upon the requirement of melting a certain quantity of snow or ice at the ice-pavement interface, and on how much of a chemical or of a mixture of chemicals is required to do that.

Clypeal patterning in the paper wasp Polistes dominulus: no evidence of adaptive value in the wild

Status signals function in a number of species to communicate competitive ability to conspecific rivals during competition for resources. In the paper wasp Polistes dominulus, variable black clypeal patterns are thought to be important in mediating competition among females. Results of previous behavioral experiments in the lab indicate that P dominulus clypeal patterns provide information about an individual's competitive ability to rivals during agonistic interactions. To date, however, there has been no detailed examination of the adaptive value of clypeal patterns in the wild. To address this, we looked for correlations between clypeal patterning and various fitness measures, including reproductive success, hierarchical rank, and survival, in a large, free-living population of P. dominulus in southern Spain. Reproductive success over the nesting season was not correlated with clypeal patterning. Furthermore, there was no relationship between a female's clypeal patterning and the rank she achieved within the hierarchy or her survival during nest founding. Overall, we found no evidence that P dominulus clypeal patterns are related to competitive ability or other aspects of quality in our population. This result is consistent with geographical variation in the adaptive value of clypeal patterns between P. dominulus populations; however, data on the relationship between patterning and fitness from other populations are required to test this hypothesis.

ESH-ESC guidelines for the management of hypertension.

The following is a brief statement of the 2003 European Society of Hypertension (ESH)-European Society of Cardiology (ESC) guidelines for the management of arterial hypertension.The continuous relationship between the level of blood pressure and cardiovascular risk makes the definition of hypertension arbitrary. Since risk factors cluster in hypertensive individuals, risk stratification should be made and decision about the management should not be based on blood pressure alone, but also according to the presence or absence of other risk factors, target organ damage, diabetes, and cardiovascular or renal damage, as well as on other aspects of the patient's personal, medical and social situation. Blood pressure values measured in the doctor's office or the clinic should commonly be used as reference. Ambulatory blood pressure monitoring may have clinical value, when considerable variability of office blood pressure is found over the same or different visits, high office blood pressure is measured in subjects otherwise at low global cardiovascular risk, there is marked discrepancy between blood pressure values measured in the office and at home, resistance to drug treatment is suspected, or research is involved. Secondary hypertension should always be investigated.The primary goal of treatment of patient with high blood pressure is to achieve the maximum reduction in long-term total risk of cardiovascular morbidity and mortality. This requires treatment of all the reversible factors identified, including smoking, dislipidemia, or diabetes, and the appropriate management of associated clinical conditions, as well as treatment of the raised blood pressure per se. On the basis of current evidence from trials, it can be recommended that blood pressure, both systolic and diastolic, be intensively lowered at least below 140/90 mmHg and to definitely lower values, if tolerated, in all hypertensive patients, and below 130/80 mmHg in diabetics.Lifestyle measures should be instituted whenever appropriate in all patients, including subjects with high normal blood pressure and patients who require drug treatment. The purpose is to lower blood pressure and to control other risk factors and clinical conditions present.In most, if not all, hypertensive patients, therapy should be started gradually, and target blood pressure achieved progressively through several weeks. To reach target blood pressure, it is likely that a large proportion of patients will require combination therapy with more than one agent. The main benefits of antihypertensive therapy are due to lowering of blood pressure per se. There is also evidence that specific drug classes may differ in some effect or in special groups of patients. The choice of drugs will be influenced by many factors, including previous experience of the patient with antihypertensive agents, cost of drugs, risk profile, presence or absence of target organ damage, clinical cardiovascular or renal disease or diabetes, patient's preference.

Abnormalities of sodium excretion and other disorders of renal function in fulminant hepatic failure

Renal function was evaluated in 40 patients with fulminant hepatic failure, They were divided into two groups on the basis of glomerular filtration rates greater than 40 ml/min or less than 25 ml/min. A number of patients in group 1 had markedly abnormal renal retention of sodium together with a reduced free water clearance and low potassium excretion which could be explained by increased proximal tubular reabsorption of sodium. The patients in group 2 had evidence that renal tubular integrity was maintained when the glomerular filtration rate was greater than or equal ml/min (functional renal failure), but evidence of tubular damage was present when this was less than 3 ml/min (acute tubular necrosis).

DFMA- Analysis and Aspects of Applying Internet Based Collaborative Design for Axial Eccentric Oil-Pump Design

The integrated system of design for manufacturing and assembly (DFMA) and internet based collaborative design are presented to support product design, manufacturing process, and assembly planning for axial eccentric oil-pump design. The presented system manages and schedules group oriented collaborative activities. The design guidelines of internet based collaborative design & DFMA are expressed. The components and the manufacturing stages of axial eccentric oil-pump are expressed in detail. The file formats of the presented system include the data types of collaborative design of the product, assembly design, assembly planning and assembly system design. Product design and assembly planning can be operated synchronously and intelligently and they are integrated under the condition of internet based collaborative design and DFMA. The technologies of collaborative modelling, collaborative manufacturing, and internet based collaborative assembly for the specific pump construction are developed. A seven-security level is presented to ensure the security of the internet based collaborative design system.

Topological aspects of DNA function and protein folding.

The Topological Aspects of DNA Function and Protein Folding international meeting provided an interdisciplinary forum for biological scientists, physicists and mathematicians to discuss recent developments in the application of topology to the study of DNA and protein structure. It had 111 invited participants, 48 talks and 21 posters. The present article discusses the importance of topology and introduces the articles from the meeting's speakers.

Evolutionary aspects of population structure for molecular and quantitative traits in the freshwater snail Radix balthica.

Detecting the action of selection in natural populations can be achieved using the QST-FST comparison that relies on the estimation of FST with neutral markers, and QST using quantitative traits potentially under selection. QST higher than FST suggests the action of directional selection and thus potential local adaptation. In this article, we apply the QST-FST comparison to four populations of the hermaphroditic freshwater snail Radix balthica located in a floodplain habitat. In contrast to most studies published so far, we did not detect evidence of directional selection for local optima for any of the traits we measured: QST calculated using three different methods was never higher than FST. A strong inbreeding depression was also detected, indicating that outcrossing is probably predominant over selfing in the studied populations. Our results suggest that in this floodplain habitat, local adaptation of R. balthica populations may be hindered by genetic drift, and possibly altered by uneven gene flow linked to flood frequency.

Evaluation de la qualité des sites internet francophones traitant de la dépendance à l'alcool [Assessing the quality of French language web sites pertaining to alcohol dependency]

The objective of this article is to systematically assess the quality of web-based information in French language on the alcohol dependence. The authors analysed, using a standardised pro forma, the 20 most highly ranked pages identified by 3 common internet search engines using 2 keywords. Results show that a total of 45 sites were analysed. The authors conclude that the overall quality of the sites was relatively poor, especially for the description of possible treatments, however with a wide variability. Content quality was not correlated with other aspects of quality such as interactivity, aesthetic or accountability.

Signature polymorphisms in the internal transcribed spacer region relevant for the differentiation of zoophilic and anthropophilic strains of Trichophyton interdigitale and other species of T. mentagrophytes sensu lato.

Summary Background Dermatophytes are the main cause of superficial mycoses in humans and animals. Molecular research has given useful insights into the phylogeny and taxonomy of the dermatophytes to overcome the difficulties with conventional diagnostics. Objectives The Trichophyton mentagrophytes complex consists of anthropophilic as well as zoophilic species. Although several molecular markers have been developed for the differentiation of strains belonging to T. mentagrophytes sensu lato, correct identification still remains problematic, especially concerning the delineation of anthropophilic and zoophilic strains of T. interdigitale. This differentiation is not academic but is essential for selection of the correct antimycotic therapy to treat infected patients. Methods One hundred and thirty isolates identified by morphological characteristics as T. mentagrophytes sensu lato were investigated using restriction fragment length polymorphism (RFLP) and sequence analysis of the polymerase chain reaction-amplified internal transcribed spacer (ITS) region of the rDNA. Results Species of this complex produced individual RFLP patterns obtained by the restriction enzyme MvaI. Subsequent sequence analysis of the ITS1, 5.8S and ITS2 region of all strains, but of T. interdigitale in particular, revealed single unique polymorphisms in anthropophilic and zoophilic strains. Conclusions Signature polymorphisms were observed to be useful for the differentiation of these strains and epidemiological data showed a host specificity among zoophilic strains of T. interdigitale/Arthroderma vanbreuseghemii compared with A. benhamiae as well as characteristic clinical pictures in humans when caused by zoophilic or anthropophilic strains. The delineation is relevant because it helps in determining the correct treatment and provides clues regarding the source of the infection.

DFM(A)-Aspects of an Advanced Cable Gland Design

Nowadays typical motor junction boxes do not incorporate cable glands, which would provide good electrical performance interms of electromagnetic compatibility. In this paper, a manufacturability and assembly analysis for the new construction of a rigid body feeder cable junction of an electric motor is presented especially for converter drives (practical tests were carried out at LUT during 2007). Although the cable junction should also clamp the cable to provide enough tensile strength, the phase conductors should not get squashed by the groundingconnection. In order to ensure good performance in an electrical mean especially in converter drives, the grounding of the cable should be connected 360 degrees around the cable. In this paper, following manufacturing technologies are discussed: traditional turning, precision and centrifugal casting, and rotation moulding. DFM(A)-aspects are presented in detail.

The potential use of microcalorimetry in rapid differentiation between septic arthritis and other causes of arthritis.

Current diagnostic methods in differentiating septic from non-septic arthritis are time-consuming (culture) or have limited sensitivity (Gram stain). Microcalorimetry is a novel method that can rapidly detect microorganisms by their heat production. We investigated the accuracy and time to detection of septic arthritis by using microcalorimetry. Patients older than 18 years of age with acute arthritis of native joints were prospectively included. Synovial fluid was aspirated and investigated by Gram stain, culture and microcalorimetry. The diagnosis of septic arthritis and non-septic arthritis were made by experienced rheumatologists or orthopaedic surgeons. Septic arthritis was diagnosed by considering the finding of acute arthritis together with findings such as positive Gram stain or positive culture of synovial fluid or positive blood culture. The sensitivity and specificity for diagnosing septic arthritis and the time to positivity of microcalorimetry were determined. Of 90 patients (mean age 64 years), nine had septic arthritis, of whom four (44 %) had positive Gram stain, six (67 %) positive synovial fluid culture and four (44 %) had positive blood culture. The sensitivity of microcalorimetry was 89 %, the specificity was 99 % and the mean detection time was 5.0 h (range, 2.2-8.0 h). Microcalorimetry is an accurate and rapid method for the diagnosis of septic arthritis. It has potential to be used in clinical practice in diagnosing septic arthritis.