Dependence of spatial coherence of 23.2-23.6-nm radiation on the geometry of a multielement germanium x-ray laser target

The spatial coherence of a nanosecond pulsed germanium collisionally excited x-ray laser is measured experimentally for three target configurations. The diagnostic is based on Young's slit interference fringes with a dispersing element to resolve the 23.2- and 23.6-nm spectral lines. Target configurations include a double-slab target, known as the injector, and geometries in which the injector image is image relayed to seed either an additional single-slab target or a second double-slab target. A special feature of this study is the observation of the change in the apparent source size with angle of refraction across the diverging laser beam. Source sizes derived with a Gaussian source model decrease from 44 mu m for the injector target by a variable factor of as much as 2, according to target configuration, for beams leaving the additional amplifiers after strong refraction in the plasma. (C) 1998 Optical Society of America [S0740-3224(98)00810-8].

Fast plasma heating in a cone-attached geometry - towards fusion ignition

We have developed a PW (0.5 ps/500J) laser system to demonstrate fast heating of imploded core plasmas using a hollow cone shell target. Significant enhancement of thermal neutron yield has been realized with PW-laser heating, confirming that the high heating efficiency is maintained as the short-pulse laser power is substantially increased to a value nearly equivalent to the ignition condition. It appears that the efficient heating is realized by the guiding of the PW laser pulse energy within the hollow cone and by self-organized relativistic electron transport. Based on the experimental results, we are developing a 10kJ-PW laser system to study the fast heating physics of high-density plasmas at an ignition-equivalent temperature.

An Experimental Assessment of the Effects of Stator Vane Tip Clearance and Back Swept Blading on an Automotive Variable Geometry Turbocharger

Off-design performance is of key importance now in the design of automotive turbocharger turbines. Due to automotive drive cycles, a turbine that can extract more energy at high pressure ratios and lower rotational speeds is desirable. Typically a radial turbine provides peak efficiency at U/C values of 0.7, but at high pressure ratios and low rotational speeds, the U/C value will be low and the rotor will experience high values of positive incidence at the inlet. The positive incidence causes high blade loading resulting in additional tip leakage flow in the rotor as well as flow separation on the suction surface of the blade. An experimental assessment has been performed on a scaled automotive VGS (variable geometry system). Three different stator vane positions have been analyzed: minimum, 25%, and maximum flow position. The first tests were to establish whether positioning the endwall clearance on the hub or shroud side of the stator vanes produced a different impact on turbine efficiency. Following this, a back swept rotor was tested to establish the potential gains to be achieved during off-design operation. A single passage CFD model of the test rig was developed and used to provide information on the flow features affecting performance in both the stator vanes and turbine. It was seen that off-design performance was improved by implementing clearance on the hub side of the stator vanes rather than on the shroud side. Through CFD analysis and tests, it was seen that two leakage vortices form, one at the leading edge and one after the spindle of the stator vane. The vortices affect the flow angle at the inlet to the rotor, in the hub region. The flow angle is shifted to more negative values of incidence, which is beneficial at the off-design conditions but detrimental at the design point. The back swept rotor was tested with the hub side stator vane clearance configuration. The efficiency and MFR were increased at the minimum and 25% stator vane position. At the design point, the efficiency and MFR were decreased. The CFD investigation showed that the incidence angle was improved at the off-design conditions for the back swept rotor. This reduction in the positive incidence angle, along with the improvement caused by the stator vane tip leakage flow, reduced flow separation on the suction surface of the rotor. At the design point, both the tip leakage flow of the stator vanes and the back swept blade angle caused flow separation on the pressure surface of the rotor. This resulted in additional blockage at the throat of the rotor reducing MFR and efficiency.

The geometry of unstented and stented pig common carotid artery bypass grafts

The long-term success of arterial bypass grafting with autologous saphenous veins is limited by neointimal hyperplasia (NIH), which seemingly develops preferentially at sites where hydrodynamic wall shear is low. Placement of a loose-fitting, porous stent around end-to-end, or end-to-side, autologous saphenous vein grafts on the porcine common carotid artery has been found significantly to reduce NIH, but the mechanism is unclear. In a preliminary study, we implanted autologous saphenous vein grafts bilaterally on the common carotid arteries of pigs, placing a stent around one graft and leaving the contralateral graft unstented. At sacrifice 1 month post implantation, the grafts were pressure fixed in situ and resin casts were made. Unstented graft geometry was highly irregular, with non-uniform dilatation, substantial axial lengthening, curvature, kinking, and possible long-pitch helical distortion. In contrast, stented grafts showed no major dilatation, lengthening or curvature, but there was commonly fine corrugation, occasional slight kinking or narrowing of segments, and possible long-pitch helical distortion. Axial growth of grafts against effectively tethered anastomoses could account for these changes. CFD studies are planned, using 3D MR reconstructions, on the effects of graft geometry on the flow. Abnormality of the flow could favour the development of vascular pathology, including NIH.

The geometry and ionization structure of the wind in the eclipsing nova-like variables RW Tri and UX UMa

The UV spectra of nova-like variables are dominated by emission from the accretion disk, modified by scattering in a wind emanating from the disk. Here, we model the spectra of RW Tri and UX UMa, the only two eclipsing nova-like variables which have been observed with the Hubble Space Telescope in the far-ultraviolet, in an attempt to constrain the geometry and the ionization structure of their winds. Using our Monte Carlo radiative transfer code, we computed spectra for simply parameterized axisymmetric biconical outflow models and were able to find plausible models for both systems. These reproduce the primary UV resonance lines-N v, Si iv, and C iv-in the observed spectra in and out of eclipse. The distribution of these ions in the wind models is similar in both cases as is the extent of the primary scattering regions in which these lines are formed. The inferred mass-loss rates are 6%-8% of the mass accretion rates for the systems. We discuss the implication of our point models for our understanding of accretion disk winds in cataclysmic variables. © 2010. The American Astronomical Society. All rights reserved.

Depression associates with Mini Nutritional Assessment (MNA), Vitamin B12 and Folate status::Findings from Belfast Elderly Longitudinal Free-Living Ageing STudy (BELFAST)

Introduction: An association between depression and folate has been found in clinical studies. Depression and dementia can contribute to nutritional deficiency. This study clinical depression in in octo/nonagenarians from the BELFAST study.
Method: In the BELFAST study, 38 free-living octo/nonagenarians (mean age 82 years), who apparently well and cognitively intact were followed up at 5 years and assessed using the Geriatric Depression Scale (GDS), Folstein (30 point), Mini Nutritional Assessment Tool (MNA) together with serum folate and vitamin B12 levels.
Results: Mean GDS was 3.4 (SD 2.5), serum folate 7.1 umol/l (SD 5.3) and B12 553 umol/l (458). With mean MNA and Folstein -25.8 (SD 2.7) and 27.6 (SD 2.7) respectively with no sex difference (p = 0.78; p = 0.36). 25% of subjects showed a GDS >5 indicating risk of mild depression and 21% had compromised nutritional status. MNA associated with GDS in male (r2 = 0.56 p = 0.01), but not in female elderly subjects (r2 = 0.01; p = 0.44). GDS score and lower serum folate were associated (r2 = -0.23; p = 0.01).
Conclusion: Overall there was the suggestion that nutritional status and depression might be linked in male subjects at 5 year follow-up in octo/nonagenarians from the BEFLAST study. The lower folate in subjects categorised at risk of mild depression might suggest vitamin supplementation could be useful.

Numerical investigation of the effects of drill geometry on drilling induced delamination of carbon fiber reinforced composites

Drilling is a major process in the manufacturing of holes required for the assemblies of composite laminates in aerospace industry. Simulation of drilling process is an effective method in optimizing the drill geometry and process parameters in order to improve hole quality and to reduce the drill wear. In this research we have developed three-dimensional (3D) FE model for drilling CFRP. A 3D progressive intra-laminar failure model based on the Hashin's theory is considered. Also an inter-laminar delamination model which includes the onset and growth of delamination by using cohesive contact zone is developed. The developed model with inclusion of the improved delamination model and real drill geometry is used to make comparison between the step drill of different stage ratio and twist drill. Thrust force, torque and work piece stress distributions are estimated to decrease by the use of step drill with high stage ratio. The model indicates that delamination and other workpiece defects could be controlled by selection of suitable step drill geometry. Hence the 3D model could be used as a design tool for drill geometry for minimization of delamination in CFRP drilling. © 2013 Elsevier Ltd.

USING ‘NUTRITIONAL NARRATIVE’ AND FOCUS GROUPS TO UNDERSTAND HOW NUTRITIONAL CARE CAN BETTER PRIORITISED FOR OLDER PEOPLE IN HOSPITAL SETTINGS

Introduction: Poor nutritional status among older people is well documented with 40% of older people reported as malnourished on hospital admission. Poor nutrition contributes to increased infection, poorer patient outcomes and death and longer hospital stays. In this study, we assessed the ‘nutrition narrative’ from older hospital patients together with nutrition knowledge among nursing and medical staff and students.
Methods: The study used a convenience sample of older people (30, mean age 82 years) in two large geographically separate city hospitals. Patients mentally alert and consenting, gave a recorded ‘nutrition narrative’ to get a sense of how they felt their nutritional needs were being met in hospital. Main themes were identified by grounded analysis framework. Focus groups were recruited from medical/nursing teachers and students to assess their working knowledge of nutrition and the nutritional needs of the older patient group.
Results: Analysis of the ‘nutrition narrative’ suggested several themes (i) staff should listen to patients' needs/wishes in discussion with themselves and family members (ii) staff should continue to encourage and progress a positive eating experience (iii) staff should monitor food eaten/or not eaten and increase regular monitoring of weight. The focus groups with medical and nursing students suggested a limited knowledge about nutritional care of older people and little understanding about roles or cross-talk about nutrition across the multidisciplinary groups.
Conclusions: The ‘nutrition narrative’ themes suggested that the nutritional experience of older people in hospital can and must be improved. Nursing and medical staff providing medical and nursing care need better basic knowledge of nutrition and nutritional assessment, an improved understanding of the roles of the various multidisciplinary staff and of hospital catering pathways. Care professionals need to prioritise patient nutrition much more highly and recognise nutritional care as integral to patient healing and recovery