Development of Abutment Design Standards for Local Bridge Designs, Volume 3 of 3, Verification of Design Methodology, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume (this volume) provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Development of Abutment Design Standards for Local Bridge Designs, Volume 2 of 3, Design Manual, August 2004

Several superstructure design methodologies have been developed for low volume road bridges by the Iowa State University Bridge Engineering Center. However, to date no standard abutment designs have been developed. Thus, there was a need to establish an easy to use design methodology in addition to generating generic abutment standards and other design aids for the more common substructure systems used in Iowa. The final report for this project consists of three volumes. The first volume summarizes the research completed in this project. A survey of the Iowa County Engineers was conducted from which it was determined that while most counties use similar types of abutments, only 17 percent use some type of standard abutment designs or plans. A literature review revealed several possible alternative abutment systems for future use on low volume road bridges in addition to two separate substructure lateral load analysis methods. These consisted of a linear and a non-linear method. The linear analysis method was used for this project due to its relative simplicity and the relative accuracy of the maximum pile moment when compared to values obtained from the more complex non-linear analysis method. The resulting design methodology was developed for single span stub abutments supported on steel or timber piles with a bridge span length ranging from 20 to 90 ft and roadway widths of 24 and 30 ft. However, other roadway widths can be designed using the foundation design template provided. The backwall height is limited to a range of 6 to 12 ft, and the soil type is classified as cohesive or cohesionless. The design methodology was developed using the guidelines specified by the American Association of State Highway Transportation Officials Standard Specifications, the Iowa Department of Transportation Bridge Design Manual, and the National Design Specifications for Wood Construction. The second volume (this volume) introduces and outlines the use of the various design aids developed for this project. Charts for determining dead and live gravity loads based on the roadway width, span length, and superstructure type are provided. A foundation design template was developed in which the engineer can check a substructure design by inputting basic bridge site information. Tables published by the Iowa Department of Transportation that provide values for estimating pile friction and end bearing for different combinations of soils and pile types are also included. Generic standard abutment plans were developed for which the engineer can provide necessary bridge site information in the spaces provided. These tools enable engineers to design and detail county bridge substructures more efficiently. The third volume provides two sets of calculations that demonstrate the application of the substructure design methodology developed in this project. These calculations also verify the accuracy of the foundation design template. The printouts from the foundation design template are provided at the end of each example. Also several tables provide various foundation details for a pre-cast double tee superstructure with different combinations of soil type, backwall height, and pile type.

Role of intracellular cysteines in ENaC function

The epithelial sodium channel (ENaC) regulates the sodium reabsorption in the collecting duct principal cells of the nephron. ENaC is mainly regulated by hormones such as aldosterone and vasopressin, but also by serine proteases, Na+ and divalent cations. The crystallization of an ENaC/Deg member, the Acid Sensing Ion Channel, has been recently published but the pore-lining residues constitution of ENaC internal pore remains unclear. It has been reported that mutation aS589C of the selectivity filter on the aENaC subunit, a three residues G/SxS sequence, renders the channel permeant to divalent cations and sensitive to extracellular Cd2+. We have shown in the first part of my work that the side chain of aSer589 residue is not pointing toward the pore lumen, permitting the Cd2+ to permeate through the ion pore and to coordinate with a native cysteine, gCys546, located in the second transmembrane domain of the gENaC subunit. In a second part, we were interested in the sulfhydryl-reagent intracellular inhibition of ENaC-mediated Na+ current. Kellenberger et al. have shown that ENaC is rapidly and reversibly inhibited by internal sulfhydryl reagents underlying the involvement of intracellular cysteines in the internal regulation of ENaC. We set up a new approach comprising a Substituted Cysteine Analysis Method (SCAM) using intracellular MTSEA-biotin perfusion coupled to functional and biochemical assays. We were thus able to correlate the cysteine-modification of ENaC by methanethiosulfonate (MTS) and its effect on sodium current. This allowed us to determine the amino acids that are accessible to intracellular MTS and the one important for the inhibition of the channel. RESUME : Le canal épithélial sodique ENaC est responsable de la réabsorption du sodium dans les cellules principales du tubule collecteur rénal. Ce canal est essentiellement régulé par voie hormonale via l'aldostérone et la vasopressine mais également par des sérines protéases, le Na+ lui-même et certains cations divalents. La cristallisation du canal sodique sensible au pH acide, ASIC, un autre membre de la famille ENaC/Deg, a été publiée mais les acides aminés constituant le pore interne d'ENaC restent indéterminés. Il a été montré que la mutation aS589C du filtre de sélectivité de la sous-unité aENaC permet le passage de cations divalents et l'inhibition du canal par le Cd2+ extracellulaire. Dans un premier temps, nous avons montré que la chaîne latérale de la aSer589 n'est pas orientée vers l'intérieur du pore, permettant au Cd2+ de traverser le canal et d'interagir avec une cysteine native du second domaine transrnembranaire de la sous-unité γENaC, γCys546. Dans un second temps, nous nous sommes intéressés au mécanisme d'inhibition d'ENaC par les réactifs sulfhydryl internes. Kellenberger et al. ont montré l'implication de cystéines intracellulaires dans la régulation interne d'ENaC par les réactifs sulfhydryl. Nous avons mis en place une nouvelle approche couplant la méthode d'analyse par substitution de cystéines (SCAM) avec des perfusions intracellulaires de MTSEAbiotine. Ainsi, nous pouvons meure en corrélation les modifications des cystéines d'ENaC par les réactifs methanethiosulfonates (MTS) avec leur effet sur le courant sodique, et donc mettre en évidence les acides aminés accessibles aux MTS intracellulaires et ceux qui sont importants dans la fonction du canal.

Les coûts des dommages éléments naturels aux bâtiments et l'influence des facteurs du risque dans un contexte d'assurance immobilière : analyse de cas des innondations et de la grêle en Suisse

In Switzerland, the annual cost of damage by natural elements has been increasing for several years despite the introduction of protective measures. Mainly induced by material destruction building insurance companies have to pay the majority of this cost. In many European countries, governments and insurance companies consider prevention strategies to reduce vulnerability. In Switzerland, since 2004, the cost of damage due to natural hazards has surpassed the cost of damage due to fire; a traditional activity of the Cantonal Insurance company (EGA). Therefore, the strategy for efficient fire prevention incorporates a reduction of the vulnerability of buildings. The thesis seeks to illustrate the relevance of such an approach when applied to the damage caused by natural hazards. It examines the role of insurance place and its involvement in targeted prevention of natural disasters. Integrated risk management involves a faultless comprehension of all risk parameters The first part of the thesis is devoted to the theoretical development of the key concepts that influence risk management, such as: hazard, vulnerability, exposure or damage. The literature on this subject, very prolific in recent years, was taken into account and put in perspective in the context of this study. Among the risk parameters, it is shown in the thesis that vulnerability is a factor that we can influence efficiently in order to limit the cost of damage to buildings. This is confirmed through the development of an analysis method. This method has led to the development of a tool to assess damage to buildings by flooding. The tool, designed for the property insurer or owner, proposes several steps, namely: - Vulnerability and damage potential assessment; - Proposals for remedial measures and risk reduction from an analysis of the costs of a potential flood; - Adaptation of a global strategy in high-risk areas based on the elements at risk. The final part of the thesis is devoted to the study of a hail event in order to provide a better understanding of damage to buildings. For this, two samples from the available claims data were selected and analysed in the study. The results allow the identification of new trends A second objective of the study was to develop a hail model based on the available data The model simulates a random distribution of intensities and coupled with a risk model, proposes a simulation of damage costs for the determined study area. Le coût annuel des dommages provoqués par les éléments naturels en Suisse est conséquent et sa tendance est en augmentation depuis plusieurs années, malgré la mise en place d'ouvrages de protection et la mise en oeuvre de moyens importants. Majoritairement induit par des dégâts matériels, le coût est supporté en partie par les assurances immobilières en ce qui concerne les dommages aux bâtiments. Dans de nombreux pays européens, les gouvernements et les compagnies d'assurance se sont mis à concevoir leur stratégie de prévention en termes de réduction de la vulnérabilité. Depuis 2004, en Suisse, ce coût a dépassé celui des dommages dus à l'incendie, activité traditionnelle des établissements cantonaux d'assurance (ECA). Ce fait, aux implications stratégiques nombreuses dans le domaine public de la gestion des risques, résulte en particulier d'une politique de prévention des incendies menée efficacement depuis plusieurs années, notamment par le biais de la diminution de la vulnérabilité des bâtiments. La thèse, par la mise en valeur de données actuarielles ainsi que par le développement d'outils d'analyse, cherche à illustrer la pertinence d'une telle approche appliquée aux dommages induits par les phénomènes naturels. Elle s'interroge sur la place de l'assurance et son implication dans une prévention ciblée des catastrophes naturelles. La gestion intégrale des risques passe par une juste maîtrise de ses paramètres et de leur compréhension. La première partie de la thèse est ainsi consacrée au développement théorique des concepts clés ayant une influence sur la gestion des risques, comme l'aléa, la vulnérabilité, l'exposition ou le dommage. La littérature à ce sujet, très prolifique ces dernières années, a été repnse et mise en perspective dans le contexte de l'étude, à savoir l'assurance immobilière. Parmi les paramètres du risque, il est démontré dans la thèse que la vulnérabilité est un facteur sur lequel il est possible d'influer de manière efficace dans le but de limiter les coûts des dommages aux bâtiments. Ce raisonnement est confirmé dans un premier temps dans le cadre de l'élaboration d'une méthode d'analyse ayant débouché sur le développement d'un outil d'estimation des dommages aux bâtiments dus aux inondations. L'outil, destiné aux assurances immobilières, et le cas échéant aux propriétaires, offre plusieurs étapes, à savoir : - l'analyse de la vulnérabilité et le potentiel de dommages ; - des propositions de mesures de remédiation et de réduction du risque issues d'une analyse des coûts engendrés par une inondation potentielle; - l'adaptation d'une stratégie globale dans les zones à risque en fonction des éléments à risque. La dernière partie de la thèse est consacrée à l'étude d'un événement de grêle dans le but de fournir une meilleure compréhension des dommages aux bâtiments et de leur structure. Pour cela, deux échantillons ont été sélectionnés et analysés parmi les données de sinistres à disposition de l'étude. Les résultats obtenus, tant au niveau du portefeuille assuré que de l'analyse individuelle, permettent de dégager des tendances nouvelles. Un deuxième objectif de l'étude a consisté à élaborer une modélisation d'événements de grêle basée sur les données à disposition. Le modèle permet de simuler une distribution aléatoire des intensités et, couplé à un modèle d'estimation des risques, offre une simulation des coûts de dommages envisagés pour une zone d'étude déterminée. Les perspectives de ce travail permettent une meilleure focalisation du rôle de l'assurance et de ses besoins en matière de prévention.

Confronting a victim of intimate partner violence in nursing care : a literature review

Intimate partner violence is a growing problem in health care. The purpose of this thesis was to find ways of confronting a victim of intimate partner violence in nursing care and methods how nurses can encourage the victim to disclose the abuse. The aim of this thesis was to help the health care professionals to understand the issue and the need of the victims better, and that way provide a better care. This thesis is a literature review of previously made research articles about intimate partner violence. The research material consisted of 10 published articles, which were collected from different databases. The articles were published within 10 years. A content analysis method was used to examine the articles by making descriptive summary tables according to each questions. The results of this study showed multiple factors which the health care providers should take into consideration when caring the patients. Asking with a non-judgemental attitude, in a safe, confidential setting without the partner present and prioritizing the abuse was mentioned to be important for the victims. Routinely screening and different kind of brochures was considered as good methods to encourage the victims to disclose the abuse. The need for better training and counselling of the health care providers was also discovered. The results of this thesis, did answer to the chosen study questions and that way the purpose of the thesis was filled. Hopefully, in the future this problem can be minimized and prevented in advanced. Further studies are needed to examine whether these caring methods are actually being used in clinical settings and do they have any effect.

Conservation of mayflies (Insecta, Ephemeroptera) in Espírito Santo, southeastern Brazil

Conservation of mayflies (Insecta, Ephemeroptera) in Espírito Santo, southeastern Brazil. Ephemeroptera exhibits great diversity among bodies of freshwater in the Atlantic Forest, a biome that is suffering from massive human impact. Within this context, the creation of conservation units using biological information is more recommended than economic, cultural, or political criteria. The distribution pattern of 76 Ephemeroptera species was analyzed using the biogeographical methods Parsimony Analysis of Endemicity and Network Analysis Method in order to infer relevant areas for conservation of the mayfly community in Espírito Santo. The results obtained from both analyses were largely congruent, and pointed out four relevant areas for conservation: two in the south of the state, where conservation units or priority areas for conservation are well established; and two in the north, a region in the state where little conservation efforts have been historically done. Therefore, based on our analyses on mayflies, we recommend the expansion of the existing APCs or the creation of new APCs on the north of Espírito Santo.

Growth and metabolic activity of the extramatrical mycelium of endomycorrhizal maize plants

The objective of this experiment was to quantify the extramatrical mycelium of the arbuscular mycorrhizal (AM) fungus Glomus etunicatum (Becker & Gerdemann) grown on maize (Zea mays L. var. Piranão) provided with various levels of phosphate fertilizer and harvested at 30, 60 and 90 days after planting (DAP). Total extramatrical mycelium (TEM) was extracted from soil using a modified membrane filtration method, followed by quantification using a grid intersection technique. Active extramatrical mycelium (AEM) proportion was determined using an enzymatic method which measured dehydrogenase activity by following iodonitrotetrazolium reduction. At low levels of added P, there was relatively less TEM than at high levels of added P, but the AEM proportion at low soil P availability was significantly greater than at high soil P.

Nanocrystalline M-type hexaferrite powders: preparation, geometric and magnetic propertiess

Co-Ti-Sn-Ge substituted M-type bariumhexaferrite powders with mean grain sizes between about 10 nm and about 1 ¿m and a narrow size distribution were prepared reproducibly by means of a modified glass crystallization method. At annealing temperatures between 560 and 580°C of the amorphous flakes nanocrystalline particles grow. They behave superparamagnetically at room temperature and change into stable magnetic single domains at lower temperatures. The magnetic volume of the powders is considerably less than the geometric one. However, the effective anisotropy fields are larger by a Factor of two to three.

Magnetic susceptibility to identify landscape segments on a detailed scale in the region of Jaboticabal, São Paulo, Brazil

The agricultural potential is generally assessed and managed based on a one-dimensional vision of the soil profile, however, the increased appreciation of sustainable production has stimulated studies on faster and more accurate evaluation techniques and methods of the agricultural potential on detailed scales. The objective of this study was to investigate the possibility of using soil magnetic susceptibility for the identification of landscape segments on a detailed scale in the region of Jaboticabal, São Paulo State. The studied area has two slope curvatures: linear and concave, subdivided into three landscape segments: upper slope (US, concave), middle slope (MS, linear) and lower slope (LS, linear). In each of these segments, 20 points were randomly sampled from a database with 207 samples forming a regular grid installed in each landscape segment. The soil physical and chemical properties, CO2 emissions (FCO2) and magnetic susceptibility (MS) of the samples were evaluated represented by: magnetic susceptibility of air-dried fine earth (MS ADFE), magnetic susceptibility of the total sand fraction (MS TS) and magnetic susceptibility of the clay fraction (MS Cl) in the 0.00 - 0.15 m layer. The principal component analysis showed that MS is an important property that can be used to identify landscape segments, because the correlation of this property within the first principal component was high. The hierarchical cluster analysis method identified two groups based on the variables selected by principal component analysis; of the six selected variables, three were related to magnetic susceptibility. The landscape segments were differentiated similarly by the principal component analysis and by the cluster analysis using only the properties with higher discriminatory power. The cluster analysis of MS ADFE, MS TS and MS Cl allowed the formation of three groups that agree with the segment division established in the field. The grouping by cluster analysis indicated MS as a tool that could facilitate the identification of landscape segments and enable the mapping of more homogeneous areas at similar locations.

Nanocrystalline M-type hexaferrite powders: preparation, geometric and magnetic propertiess

Co-Ti-Sn-Ge substituted M-type bariumhexaferrite powders with mean grain sizes between about 10 nm and about 1 ¿m and a narrow size distribution were prepared reproducibly by means of a modified glass crystallization method. At annealing temperatures between 560 and 580°C of the amorphous flakes nanocrystalline particles grow. They behave superparamagnetically at room temperature and change into stable magnetic single domains at lower temperatures. The magnetic volume of the powders is considerably less than the geometric one. However, the effective anisotropy fields are larger by a Factor of two to three.

Performance of the 47-Kilodalton Membrane Protein versus DNA Polymerase I Genes for Detection of Treponema pallidum by PCR in Ulcers.

Treponema pallidum PCR (Tp-PCR) is a direct diagnostic method for primary and secondary syphilis, but there is no recommendation regarding the best choice of target gene. In this study, we sequentially tested 272 specimens from patients with sexually transmitted ulcers using Tp-PCR targeting the tpp47 and then polA genes. The two methods showed similar accuracies and an almost-perfect agreement.

Structural and magnetic characterization of the lithiated iron oxide LixFe3O4

The Rietveld profile‐analysis method is used to investigate the x‐ray diffraction pattern of lithiated Fe3O4. It is shown that, after exposure to air, pure magnetite coexists with a lithium‐inserted LixFe3O4 phase. The Mössbauer spectra at 300 and 4.2 K have been used to estimate the lithium content of the sample, the pure magnetite concentration, and the iron distribution over the available 16c and 16d sites of the spinel structure. Magnetization measurements from 4.2 to 120 K with an external magnetic field up to 150 kOe have been used to obtain the saturation magnetic moment, the magnetic anisotropy constants, and the susceptibility. It is concluded that a noncollinear spin structure should be present in Li0.5Fe3O4. These results indicate that there is no room‐temperature extrusion of iron even for x→2.0, but that on exposure to air LixFe3O4 samples with x>0.5 are oxidized at room temperature by delithiation.

Affective state and voice : cross-cultural assessment of speaking behavior and voice sound characteristics : a normative multicenter study of 577 + 36 healthy subjects

BACKGROUND: Human speech is greatly influenced by the speakers' affective state, such as sadness, happiness, grief, guilt, fear, anger, aggression, faintheartedness, shame, sexual arousal, love, amongst others. Attentive listeners discover a lot about the affective state of their dialog partners with no great effort, and without having to talk about it explicitly during a conversation or on the phone. On the other hand, speech dysfunctions, such as slow, delayed or monotonous speech, are prominent features of affective disorders. METHODS: This project was comprised of four studies with healthy volunteers from Bristol (English: n = 117), Lausanne (French: n = 128), Zurich (German: n = 208), and Valencia (Spanish: n = 124). All samples were stratified according to gender, age, and education. The specific study design with different types of spoken text along with repeated assessments at 14-day intervals allowed us to estimate the 'natural' variation of speech parameters over time, and to analyze the sensitivity of speech parameters with respect to form and content of spoken text. Additionally, our project included a longitudinal self-assessment study with university students from Zurich (n = 18) and unemployed adults from Valencia (n = 18) in order to test the feasibility of the speech analysis method in home environments. RESULTS: The normative data showed that speaking behavior and voice sound characteristics can be quantified in a reproducible and language-independent way. The high resolution of the method was verified by a computerized assignment of speech parameter patterns to languages at a success rate of 90%, while the correct assignment to texts was 70%. In the longitudinal self-assessment study we calculated individual 'baselines' for each test person along with deviations thereof. The significance of such deviations was assessed through the normative reference data. CONCLUSIONS: Our data provided gender-, age-, and language-specific thresholds that allow one to reliably distinguish between 'natural fluctuations' and 'significant changes'. The longitudinal self-assessment study with repeated assessments at 1-day intervals over 14 days demonstrated the feasibility and efficiency of the speech analysis method in home environments, thus clearing the way to a broader range of applications in psychiatry. © 2014 S. Karger AG, Basel.

Quantify this! Report on a round table discussion on quantitative mass spectrometry in proteomics.

Following the success of the first round table in 2001, the Swiss Proteomic Society has organized two additional specific events during its last two meetings: a proteomic application exercise in 2002 and a round table in 2003. Such events have as their main objective to bring together, around a challenging topic in mass spectrometry, two groups of specialists, those who develop and commercialize mass spectrometry equipment and software, and expert MS users for peptidomics and proteomics studies. The first round table (Geneva, 2001) entitled "Challenges in Mass Spectrometry" was supported by brief oral presentations that stressed critical questions in the field of MS development or applications (Stöcklin and Binz, Proteomics 2002, 2, 825-827). Topics such as (i) direct analysis of complex biological samples, (ii) status and perspectives for MS investigations of noncovalent peptide-ligant interactions; (iii) is it more appropriate to have complementary instruments rather than a universal equipment, (iv) standardization and improvement of the MS signals for protein identification, (v) what would be the new generation of equipment and finally (vi) how to keep hardware and software adapted to MS up-to-date and accessible to all. For the SPS'02 meeting (Lausanne, 2002), a full session alternative event "Proteomic Application Exercise" was proposed. Two different samples were prepared and sent to the different participants: 100 micro g of snake venom (a complex mixture of peptides and proteins) and 10-20 micro g of almost pure recombinant polypeptide derived from the shrimp Penaeus vannamei carrying an heterogeneous post-translational modification (PTM). Among the 15 participants that received the samples blind, eight returned results and most of them were asked to present their results emphasizing the strategy, the manpower and the instrumentation used during the congress (Binz et. al., Proteomics 2003, 3, 1562-1566). It appeared that for the snake venom extract, the quality of the results was not particularly dependant on the strategy used, as all approaches allowed Lication of identification of a certain number of protein families. The genus of the snake was identified in most cases, but the species was ambiguous. Surprisingly, the precise identification of the recombinant almost pure polypeptides appeared to be much more complicated than expected as only one group reported the full sequence. Finally the SPS'03 meeting reported here included a round table on the difficult and challenging task of "Quantification by Mass Spectrometry", a discussion sustained by four selected oral presentations on the use of stable isotopes, electrospray ionization versus matrix-assisted laser desorption/ionization approaches to quantify peptides and proteins in biological fluids, the handling of differential two-dimensional liquid chromatography tandem mass spectrometry data resulting from high throughput experiments, and the quantitative analysis of PTMs. During these three events at the SPS meetings, the impressive quality and quantity of exchanges between the developers and providers of mass spectrometry equipment and software, expert users and the audience, were a key element for the success of these fruitful events and will have definitively paved the way for future round tables and challenging exercises at SPS meetings.

Degeneracy of antigen recognition as the molecular basis for the high frequency of naive A2/Melan-a peptide multimer(+) CD8(+) T cells in humans.

In contrast with the low frequency of most single epitope reactive T cells in the preimmune repertoire, up to 1 of 1,000 naive CD8(+) T cells from A2(+) individuals specifically bind fluorescent A2/peptide multimers incorporating the A27L analogue of the immunodominant 26-35 peptide from the melanocyte differentiation and melanoma associated antigen Melan-A. This represents the only naive antigen-specific T cell repertoire accessible to direct analysis in humans up to date. To get insight into the molecular basis for the selection and maintenance of such an abundant repertoire, we analyzed the functional diversity of T cells composing this repertoire ex vivo at the clonal level. Surprisingly, we found a significant proportion of multimer(+) clonotypes that failed to recognize both Melan-A analogue and parental peptides in a functional assay but efficiently recognized peptides from proteins of self- or pathogen origin selected for their potential functional cross-reactivity with Melan-A. Consistent with these data, multimers incorporating some of the most frequently recognized peptides specifically stained a proportion of naive CD8(+) T cells similar to that observed with Melan-A multimers. Altogether these results indicate that the high frequency of Melan-A multimer(+) T cells can be explained by the existence of largely cross-reactive subsets of naive CD8(+) T cells displaying multiple specificities.