Effects of Silicon and Drought Stress on Tuber Yield and Leaf Biochemical Characteristics in Potato

Silicon has beneficial effects on many crops, mainly under biotic and abiotic stresses. Silicon can affect biochemical, physiological, and photosynthetic processes and, consequently, alleviates drought stress. However, the effects of Si on potato (Solanum tuberosum L.) plants under drought stress are still unknown. The objective of this study was to evaluate the effect of Si supply on some biochemical characteristics and yield of potato tubers, either exposed or not exposed to drought stress. The experiment was conducted in pots containing 50 dm(3) of a Typic Acrortox soil (33% clay, 4% silt, and 63% sand). The treatments consisted of the absence or presence of Si application (0 and 284.4 mg dm(-3)), through soil amelioration with dolomitic lime and Ca and Mg silicate, and in the absence or presence of water deficit (-0.020 MPa and -0.050 MPa soil water potential, respectively), with eight replications. Silicon application and water deficit resulted in the greatest Si concentration in potato leaves. Proline concentrations increased under lower water availability and higher Si availability in the soil, which indicates that Si may be associated with plant osmotic adjustment. Water deficit and Si application decreased total sugars and soluble proteins concentrations in the leaves. Silicon application reduced stalk lodging and increased mean tuber weight and, consequently, tuber yield, especially in the absence of water stress.

Severity of banana leaf spot in an intercropping system in two cycles of banana Prata Ana

Prata Ana is the most planted banana cultivar in northern Minas Gerais, Brazil. It is however susceptible to several pathogens. This study was carried out to evaluate the disease severity of banana leaf spot in the Prata Ana cv. in the first and second cycle under six different planting systems. The randomized block experimental design was used with six treatments and four replications. lit an evaluation of the severity of banana leaf spot, no disease symptoms were found on Thap Maeo and Caipira. The evolution curve of the disease indicated seasonal effects in the first and second cycles. The severity, of banana leaf spot was highest soon after the regional rainy period from November to March. A comparison of the means of the evaluations indicated a reduction in disease severity from the first to the second cycle.

A simple and non-destructive model for individual leaf area estimation in citrus

Introduction. Leaf area is often related to plant growth, development, physiology and yield. Many non-destructive models have been proposed for leaf area estimation of several plant genotypes, demonstrating that leaf length, leaf width and leaf area are closely correlated. Thus, the objective of our study was to develop a reliable model for leaf area estimation from linear measurements of leaf dimensions for citrus genotypes. Materials and methods. Leaves of citrus genotypes were harvested, and their dimensions (length, width and area) were measured. Values of leaf area were regressed against length, width, the square of length, the square of width and the product (length x width). The most accurate equations, either linear or second-order polynomial, were regressed again with a new data set; then the most reliable equation was defined. Results and discussion. The first analysis showed that the variables length, width and the square of length gave better results in second-order polynomial equations, while the linear equations were more suitable and accurate when the width and the product (length x width) were used. When these equations were regressed with the new data set, the coefficient of determination (R(2)) and the agreement index 'd' were higher for the one that used the variable product (length x width), while the Mean Absolute Percentage Error was lower. Conclusion. The product of the simple leaf dimensions (length x width) can provide a reliable and simple non-destructive model for leaf area estimation across citrus genotypes.

Impacts of limestone and nitrogen top dressing application on the potassium content in the soil profile and marandu-grass leaf concentration

Objetivou-se avaliar os efeitos de nitrogênio (0, 100, 200, 300 e 400 kg/ha.ano), com ou sem aplicação de calcário dolomítico em cobertura, sobre o teor de potássio (K) do solo nas profundidades de 0 a 5; 5 a 10; e 10 a 20 cm e a concentração de potássio na planta. O experimento foi realizado em Latossolo Vermelho distroférrico de relevo suavemente ondulado, disposto em esquema fatorial 5 × 2, em blocos casualizados, com quatro repetições. A adubação nitrogenada promoveu aumento linear na concentração de potássio na planta e no teor desse mineral na camada de 0 a 5 cm do solo. Ocorreu efeito de inibição competitiva entre a absorção de potássio e cálcio e entre potássio e magnésio. Embora uma fração significativa de potássio retorne à camada superficial do solo pelo resíduo de forragem, em decorrência da maior produção de massa, o aumento da concentração de potássio na planta nas mais altas doses de nitrogênio comprova a importância do suprimento de potássio para a planta, por intensificar a massa de forragem.

Structural characteristics and forage mass of Tifton 85 pastures managed under three post-grazing residual leaf areas

The experiment was carried out on Cynodon spp cv. Tifton 85 pastures grazed by sheep under rotational stocking, with the objective of evaluating the structural characteristics as well as the forage mass of the pastures subjected to three grazing intensities in successive cycles. Treatments were composed of three residual leaf area indices (rLAI; 2.4; 1.6 and 0.8), allocated in completely randomized blocks with seven replications, totaling 21 experimental units. Tiller population density, pasture height, leaf area index, forage morphological composition and pasture forage mass were evaluated. The rLAI modified the tiller population density, which increased linearly with decrease in the rLAI of the pastures. Dry masses of leaf blade, stem and dead material were inferior when the rLAI imposed were lower, which resulted in differentiated forage production among the treatments. Tifton 85 pastures grazed by sheep in rotational stocking under tropical conditions with different rLAI show a modified sward structure over successive grazing cycles, mainly by alteration in the height and LAI of the plants at pre-grazing and by light interception post-grazing, which change the tiller population density. The residual leaf area index of 1.6 is the most suitable for pasture management for being equivalent to the heights of entrance and exit of animals on and from paddocks of 33 and 19 cm, respectively, which avoid great accumulation of dead material and excessive stem elongation, in addition to ensuring tillering in the sward.

Cellulose nanocomposites with nanofibres isolated from pineapple leaf fibers for medical applications

Nanocellulose is the crystalline domains obtained from renewable cellulosic sources, used to increase mechanical properties and biodegrability in polymer composites. This work has been to study how high pressure defibrillation and chemical purification affect the PALF fibre morphology from micro to nanoscale. Microscopy techniques and X-ray diffraction were used to study the structure and properties of the prepared nanofibers and composites. Microscopy studies showed that the used individualization processes lead to a unique morphology of interconnected web-like structure of PALF fibers. The produced nanofibers were bundles of cellulose fibers of widths ranging between 5 and 15 nm and estimated lengths of several micrometers. Percentage yield and aspect ratio of the nanofiber obtained by this technique is found to be very high in comparison with other conventional methods. The nanocomposites were prepared by means of compression moulding, by stacking the nanocellulose fibre mats between polyurethane films. The results showed that the nanofibrils reinforced the polyurethane efficiently. The addition of 5 wt% of cellulose nanofibrils to PU increased the strength nearly 300% and the stiffness by 2600%. The developed composites were utilized to fabricate various versatile medical implants. (C) 2011 Elsevier Ltd. All rights reserved.

Leaf nutritional levels in peach and nectarine grown in subtropical climate

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Production of polysaccharidases in different carbon sources by Leucoagaricus gongylophorus Moller (Singer), the symbiotic fungus of the leaf-cutting ant Atta sexdens linnaeus

Leucoagaricus gongylophorus, the fungus cultured by the leaf-cutting ant Atta sexdens, produces polysaccharidases that degrade leaf components by generating nutrients believed to be essential for ant nutrition. We evaluated pectinase, amylase, xylanase, and cellulase production by L. gongylophorus in laboratory cultures and found that polysaccharidases are produced during fungal growth on pectin, starch, cellulose, xylan, or glucose but not cellulase, whose production is inhibited during fungal growth on xylan. Pectin was the carbon source that best stimulated the production of enzymes, which showed that pectinase had the highest production activity of all of the carbon sources tested, indicating that the presence of pectin and the production of pectinase are key features for symbiotic nutrition on plant material. During growth on starch and cellulose, polysaccharidase production level was intermediate, although during growth on xylan and glucose, enzyme production was very low. We propose a possible profile of polysaccharide degradation inside the nest, where the fungus is cultured on the foliar substrate.

Evaluation of the adequacy of diflubenzuron and dechlorane in toxic baits for leaf-cutting ants (Hymenoptera : Formicidae) based on formicidal activity

Studies assessing the characteristics of active ingredients (AIs) of toxic baits for leaf-cutting ants are still scarce, although the need for a delayed action of these compounds on adult workers has been well accepted (mortality <= 15% at 24 h and <= 90% at 21 days). Therefore, we determined the insecticidal action of two AIs used in commercial baits, diflubenzuron and dechlorane, over time in workers, and discussed the control of colonies in relation to the existing literature. Dechlorane presented excellent insecticidal activity with a delayed action at all concentrations tested, although its commercial use has been prohibited due to its organochlorine nature. In contrast, diflubenzuron did not cause significant mortality or symptoms of intoxication, indicating that the successful cases reported with the use of baits containing this AI were in fact due to an accidental contamination with dechlorane. We comment about the ineffectiveness of diflubenzuron on alternative targets, i.e., young forms and the mutualistic fungus, supporting the concept that the AI needs to a have a delayed action on adult workers.

Larval isolation and brood care in Acromyrmex leaf-cutting ants

The larvae of leaf-cutting ants are maintained within the fungus gardens of their colonies and are fed pieces of fungus by the adult workers. However, little else is known about the nature of the worker-larva interaction in these ecologically important ants. To examine whether workers can gauge the needs of individual larvae, we isolated larvae without adult workers for different lengths of time. We then placed workers with the larvae and recorded the type and frequency of the subsequent behaviours of the workers. Workers scraped the mouthparts of larvae, ingested their faecal fluid, fed them with fungal hyphae, transported them around the fungus garden and, most frequently, licked their bodies. The workers were also observed to 'plant' fungal hyphae on the bodies of larvae. Workers interacted more frequently with larvae that had been isolated without workers than with those that had not, but there was no effect of the length of isolation. The results suggest that the interactions are complex, involving a number of behaviours that probably serve different functions, and that workers are to some extent able to assess the individual needs of larvae.

Filamentous fungi found on foundress queens of leaf-cutting ants (Hymenoptera: Formicidae)

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Geographic Distribution and Population Estimate of Leaf-cutting Ants of the Genus Acromyrmex (Hymenoptera: Formicidae) in Southwestern Bahia

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Digging effort in leaf-cutting ant queens (Atta sexdens rubropilosa) and its effects on survival and colony growth during the claustral phase

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Nest Digging by Leaf-Cutting Ants: Effect of Group Size and Functional Structures.

Leaf-cutting ant workers dig underground chambers, for housing their symbiotic fungus, interconnected by a vast quantity of tunnels whose function is to permit the entrance of food (leaves), gaseous exchanges, andmovement of workers, offspring, and the queen. Digging is a task executed by a group of workers, but little is known about the group effect and group-constructed functional structures. Thus, we analyzed the structures formed by worker groups (5, 10, 20, and 40 individuals) of the leaf-cutting ant, Atta sexdens rubropilosa, for 2 days of excavation. The digging arena was the same for the 4 groups, with each group corresponding to a different density. Our results verified a pattern of tunneling by the workers, but no chamber was constructed. The group effect is well known, since the 40-worker group dug significantly more than the groups of 5, 10, and 20. These groups did not differ statistically from each other. Analysis of load/worker verified that workers of the smallest group carried the greatest load. Our paper demonstrates the group effect on the digging of nests, namely, that excavation is proportional to group size, but without emergence of a functional structure such as a chamber.