Schistosoma mansoni: evaluation of the activity of oxamniquine on schistosomules, at 24 hours after infection

Mice transcutaneously infected with about 400 cercariae were submitted to treatment with oxamniquine (400 mg/kg), 24 hours after infection. The recovery of schistosomules, at 4, 24, 48 and 72 hours and 35 days after treatment, showed the activity of the drug on the parasites, thus practically preventing their migration from the skin to the lungs. Worm recovery performed in the lungs (96 hours after treatment) showed recovery means of 0.6 worms/mouse in the treated group and 53.8 in the control group (untreated). The perfusion of the portal system carried out at 35 days after treatment clearly showed the elimination of all the parasites in the treated group, whereas a recovery mean of 144.7 worms/mouse was detected in the control group (untreated). These findings confirm the efficacy of oxamniquine at the skin phase of infection, and also show similarity with the immunization method that uses irradiated cercariae. The practical application of these findings in the medical clinic is discussed too

Changes in pentobarbital induced sleeping-time in mice infected with Schistosoma mansoni and immunosuppressed

To evaluate whether the intensity of the hepatic granulomatous response induced by S. mansoni eggs plays a role in drug metabolism, mice were infected with 40 cercariae and tested to assess the sodic pentobarbital induced sleeping-time. To decrease the inflammatory reaction the animals were irradiated with 400 Rad or received azathioprine, 20mg/kg, 3 times a week, for 4 weeks, respectively in or beginning in the 33th post-infection day. In infected animals receiving azathioprine the area of the hepatic granulomas was smaller and the sleeping-time was similar to that of non-infected ones (controls). In mice infected and irradiated the granuloma dimensions were similar to those of animals only infected, in these two latter groups of animals, the sleeping-time was more prolonged than that of the control animals. These results show that: 1) mice with unaltered hepatic granulomatous reaction show reduction in metabolism of sodic pentobarbital; 2) granulomatous response diminished by azathioprine does not interfere with the capacity of metabolism of the anesthetic drug.

Impacto da Radioterapia no stress oxidativo em modelos celulares radiorresistentes em contexto de obesidade

Introdução: Estudos anteriores em modelos tumorais de glioma e melanoma, tumores radiorresistentes, indicaram que a obesidade pode estar relacionada com um aumento do status oxidativo e com a diminuição da resistência à radiação. Como a Radioterapia é o tratamento frequentemente utilizado para esta patologia, propomo-nos, desta forma, a explorar a influência da obesidade em células de glioma, as BC3H1, e melanoma, B16F10, submetidas a Radioterapia, na presença de agentes oxidantes e antioxidantes, para o estudo da sua influência ao nível da viabilidade celular e do impacto do stress oxidativo. Métodos: As células BC3H1 e B16F10 foram tratadas com t-BOOH (150μM e 50 μM, respetivamente), TUDCA (25μM e 1μM, respetivamente) e com a mistura de t-BOOH+TUDCA em meio DMEM sem soro e meio condicionado (CM), a partir de adipócitos 3T3-L1. Em seguida, parte das células foram irradiadas com uma dose total de 2Gy. Posteriormente avaliou-se a viabilidade celular (teste MTT) e o stress oxidativo (teste TBARS, atividade da catalase, concentração da GSH, e status antioxidante total), às 4h e 12h. Resultados: Observou-se um aumento da capacidade antioxidante total das células irradiadas, comparativamente com as células não irradiadas. O meio condicionado reduziu o stress oxidativo nas BC3H1, ao mesmo tempo que reduziu a sua viabilidade celular. O TUDCA nas células incubadas com MC e submetidas a radioterapia, tendencialmente diminuiu a viabilidade celular, nas concertações em estudo. Discussão/Conclusão: O meio condicionado e a radioterapia, por si só, aumentam a resposta antioxidante total na célula, às 4h e às 12h. O TUDCA nas células incubadas com meio condicionado e submetidas a radioterapia, teve um comportamento citotóxico para as BC3H1, nas concentrações testadas. Revelando a necessidade de aprofundar os estudos da ação deste composto como agente radiossensibilizador, neste e noutros modelos celulares de carcinogénese.

Ligação Adesiva de Polímeros Particularmente Difíceis de Colar

As ligações adesivas têm sido cada vez mais utilizadas nos últimos anos em detrimento de outros métodos tais como a soldadura, ligações aparafusadas e ligações rebitadas. Os plásticos de Engenharia têm um papel cada vez mais preponderante na indústria, devido às suas excelentes propriedades. Neste trabalho foram considerados três polímeros diferentes, o Policloreto de Vinilo (PVC) e o Polipropileno (PP) dado o seu baixo custo e peso e a superfície quimicamente inerte e o Politetrafluoretileno (PTFE) devido às suas boas propriedades químicas e excelentes propriedades de deslizamento. No entanto, estes materiais possuem uma baixa energia de superfície e, por isso, são muito difíceis de colar com mais relevância para o PTFE. Assim, após um estudo preliminar foi escolhido, para realizar as colagens necessárias, um adesivo da Tamarron Technology “Tam Tech Adhesive”, próprio para este tipo de substratos difíceis de colar. Posteriormente foi efetuada a sua caraterização através de ensaios de provetes maciços à tração. O principal objetivo deste trabalho foi estudar juntas de sobreposição simples de materiais poliméricos difíceis de colar tais como o PTFE, PP e PVC com recurso a um adesivo que não necessitasse de preparação de superfície. Foram fabricadas juntas de sobreposição simples (JSS) segundo os métodos Lap Shear (LS) e Block Shear (BS) dos três materiais referidos anteriormente e realizados os respetivos ensaios para avaliar o comportamento mecânico das ligações adesivas. Os materiais utilizados como substratos foram também submetidos a ensaios de tração com a finalidade de obter o módulo de elasticidade e as suas propriedades de resistência. Os substratos envolvidos nas juntas adesivas não sofreram qualquer preparação especial das superfícies. Na maioria dos casos consistiu apenas numa limpeza das superfícies com álcool etílico. Contudo, para o PTFE também se experimentou a preparação por abrasão com lixa e por chama. Foi também efetuado um trabalho de simulação numérica por elementos finitos utilizando um modelo de dano coesivo triangular. As resistências ao corte obtidas são superiores em BS comparativamente a LS, exceção feita aos substratos de PTFE aonde os resultados são similares. O tratamento por chama melhorou a resistência mecânica das juntas. Verificou-se também que o modelo numérico simulou adequadamente o comportamento das juntas principalmente das LS.

Gamma 60Co DL50/30 of Biomphalaria glabrata (Say, 1818)

The variation of resistance to 60Co gamma-rays of Biomphalaria glabrata was studied. A population of 480 mollusks was observed during 30 days - distributed in 8 groups of snails isolated and 8 groups of snails in colonies - after exposure (30 snails per group per dose) to increasing doses of gamma radiation. Doses of 10, 20, 40, 60, 80, 160, 320 and 640 Gy from a Gamma-cell 60Co irradiator, were applied to the test groups and two groups control (non-irradiated) of snails - isolated and colony - were kept apart. After have been exposed, the snails were drew back to the aquaria where they were maintained before. The survival was estimated on a daily score of the alive animals in each group-dose, starting after the irradiation exposure day. As a result, the survival self-fertilization forms (DL50/30 = 218.2 Gy) was found greater than in cross-fecundation forms. These data point to a low radio-resistance on the cross-fertilization forms - the sexual reproductive form - which is most found in nature. The lower radio-resistance of the cross-fertilization forms suggests the presence of some sex-linked hormonal factor related to this phenomenon.

Schistosoma mansoni: inflammatory foci around larvae in the peritoneal cavity of naive mice is radiosensitive

Innate attack to Schistosoma mansoni cercariae was evaluated in irradiated mice. It was observed that 70% of the larvae from mice sacrificed one day after whole body irradiation with 400 or 800 rads were surrounded by cluster reactivities, without difference from controls. Differences were apparent on day 5 after irradiation with sub lethal (400 rads) or lethal doses (800 rads) suggesting that innate defence to infection take at least 5 days to be affected by low dose whole-body radiation.

Optimizing potentiometric ionophore and electrode design for environmental on-site control of antibiotic drugs: Application to sulfamethoxazole

Potentiometric sensors are typically unable to carry out on-site monitoring of environmental drug contaminants because of their high limits of detection (LODs). Designing a novel ligand material for the target analyte and managing the composition of the internal reference solution have been the strategies employed here to produce for the first time a potentiometric-based direct reading method for an environmental drug contaminant. This concept has been applied to sulfamethoxazole (SMX), one of the many antibiotics used in aquaculture practices that may occur in environmental waters. The novel ligand has been produced by imprinting SMX on the surface of graphitic carbon nanostructures (CN) < 500 nm. The imprinted carbon nanostructures (ICN) were dispersed in plasticizer and entrapped in a PVC matrix that included (or not) a small amount of a lipophilic additive. The membrane composition was optimized on solid-contact electrodes, allowing near-Nernstian responses down to 5.2 μg/mL and detecting 1.6 μg/mL. The membranes offered good selectivity against most of the ionic compounds in environmental water. The best membrane cocktail was applied on the smaller end of a 1000 μL micropipette tip made of polypropylene. The tip was then filled with inner reference solution containing SMX and chlorate (as interfering compound). The corresponding concentrations were studied for 1 × 10−5 to 1 × 10−10 and 1 × 10−3 to 1 × 10−8 mol/L. The best condition allowed the detection of 5.92 ng/L (or 2.3 × 10−8 mol/L) SMX for a sub-Nernstian slope of −40.3 mV/decade from 5.0 × 10−8 to 2.4 × 10−5 mol/L.

Activity of Tri-N-Butyl Tin maleate in carpets against Staphylococcus aureus and Aspergillus niger, verified through two methodologies: Inhibition Halo (HZ) and Inhibition Surface (Print)

The aim of the present study was to verify the activity of the Tri-N-Butyl Tin maleate compound against Staphylococcus aureus and Aspergillus niger, after its industrial application in 40 samples of carpets of different materials (polypropylene, polyester, polyamide and wool). The qualitative assays were performed through two methodologies: Inhibition Halo (HZ) and Inhibition of Surface (Print). The carpet with the product inhibited 100% of bacterial (Staphylococcus aureus) and fungi (Aspergillus niger) growth, under the conditions of this study. The microbial inhibition was higher in upper portion of carpets. The methodologies employed appear to be adequate to test the bactericide and fungicide activities of the Tri-N-Butyl Tin maleate. The print methodology confirmed the results obtained by the inhibition zone assay. Further studies using the same methodologies are needed to confirm our results.

Abdominoplasty and Thoraco-Epigastric Flaps for Large Anterior Trunk Defects after Dermatofibrosarcoma Protuberans Wide Resection: Two Illustrative Cases

INTRODUCTION: Excision of large dermatofibrosarcoma protuberans in the anterior aspect of the trunk often results in large surgical defects that frequently dictate the need for microsurgical reconstruction. However, this option is not always available. PRESENTATION OF CASE: The authors describe two patients with very large anterior trunk dermatofibrosarcoma protuberans: one in the epigastric region and the other in the hypogastric region. In the patient with the hypogastric tumor, a classical abdominoplasty flap associated with umbilical transposition was used to cover the skin defect after muscle and fascial plication, and placement of a polypropylene mesh. In the patient with the epigastric tumor, a synthetic mesh was also placed, and the skin and subcutaneous defect was reconstructed with a reverse abdominoplasty flap and two thoraco-epigastric flaps. In both cases, complete closure was possible without immediate or late complications. DISCUSSION: The local options described in this paper present several potential advantages compared to microsurgical reconstruction, namely they are easier and faster to perform and teach; they provide a good skin color and texture match; they are not associated with distant donor site morbidity; follow-up is usually less cumbersome; the post-operative hospital stay tends to be shorter; they are less costly; they are less prone to complete failure. CONCLUSION: The authors believe that these two patients clearly show that local flaps, although frequently neglected, continue to be valid options for reconstructing large anterior trunk defects, even in the current era of microsurgery enthusiasm.

Estudo da Produção de Towpregs e Transformação por Pultrusão

Durante as últimas décadas, os materiais compósitos têm substituído com sucesso os materiais tradicionais em muitas aplicações de engenharia, muito devido às excelentes propriedades que se conseguem obter com a combinação de materiais diferentes. Nos compósitos reforçados com fibras longas ou contínuas tem-se verificado, ao longo dos últimos anos, um aumento do uso de matrizes termoplásticas, fruto de várias vantagens associadas, como o facto de serem bastante mais ecológicas, comparativamente às termoendurecíveis. No entanto, este aumento está muito dependente do desenvolvimento de novas tecnologias de processamento, pois a elevada viscosidade dos termoplásticos, comparativamente aos termoendurecíveis, dificulta significativamente o processo. Muitos equipamentos de produção de termoplásticos são resultado de adaptações de equipamentos de produção de termoendurecíveis, onde normalmente é necessário adicionar fornos de pré-aquecimento. Neste trabalho, pretendeu-se produzir pré-impregnados de fibras contínuas com matriz termoplástica, por deposição a seco de polímero em pó sobre fibras de reforço (denominados por towpreg) para, posteriormente, serem transformados por pultrusão e caracterizados. As matérias-primas utilizadas foram: Polipropileno (PP) como matriz termoplástica e fibra de carbono como reforço. Por forma a melhorar as propriedades finais do compósito, foram otimizadas as condições de processamento na produção dos towpregs, estudando-se a influência da variação dos parâmetros de processamento no teor de polímero presente nestes, tendo como objetivo teores mássicos de polímero superiores a 30%. A condição ótima e a influência dos parâmetros de processamento foram obtidas com o auxílio do Método de Taguchi. Os perfis produzidos por pultrusão foram sujeitos a ensaios de flexão, de forma a obter as suas propriedades quando sujeitos a esse tipo de esforço. Foram também realizados ensaios de calcinação de forma a obter as frações mássicas de fibra e polímero presentes no compósito final. Sabidas as frações mássicas, converteramse em frações volúmicas e obtiveram-se as propriedades teoricamente esperadas através da Lei das Misturas e compararam-se com as obtidas experimentalmente. As propriedades obtidas foram também comparadas com as de outros compósitos pultrudidos.

Projeto de molde para a injeção de peça plástica complexa para a indústria automóvel

A fabricação de moldes é um pilar da indústria metalomecânica nacional. A qualidade patenteada pelos moldes de fabrico nacional é reconhecida mundialmente. A fabricação de um molde é sempre um novo desafio, dadas as especificidades de cada peça e à complexidade geométrica que normalmente apresentam. Este trabalho teve por principal objetivo proceder ao projeto, fabricação e ajuste de um molde para uma peça plástica complexa, destinada à indústria automóvel, a qual, pela sua complexidade geométrica, elevada relação de área versus espessura e grande número de reforços bastante delgados, exige cuidados especiais no momento de se tomarem decisões quanto às melhores metodologias a adotar na sua fabricação, com vista a garantir a qualidade exigida pelo cliente final. O projeto foi desenvolvido e levado a cabo, permitindo constatar que algumas das opções tomadas na fase do projeto foram as mais adequadas, exigindo pouco trabalho de afinação no final e permitindo a extração de peças com elevada repetibilidade de características e a qualidade requerida pelo cliente.

Study of nuclear reactions relevant for astrophysics by Micro-AMS

Dissertação para obtenção do Grau de Doutor em Física

Behavior of Schistosoma mansoni-induced histopathological lesions in Biomphalaria glabrata submitted to ionizing radiation

Present report demonstrates that repeated radiation of Schistosoma mansoni-infected Biomphalaria glabrata, totaling 15,000 rads, caused a sudden, albeit transient, suppression of cercarial shedding. Initially, sporocysts practically disappeared from the snail tissues. The more resistant developing cercariae presented nuclear clumping and vacuolation, before undergoing lysis. No host tissue reaction was evident at any time. Thirty-four days after the last irradiation, the snails resumed cercarial elimination. By that time numerous sporocysts and developing cercariae were detected, disseminated throughout snail tissues in a pattern similar to that of a highly malignant neoplasm, with no signs of host cellular reactions, which on the other hand were present in non-irradiated infected controls. The region of the ovo-testis was apparently destroyed after radiation, but returned to its normal appearance around 40 days after the last radiation. Ionizing radiation affected both host and parasite in S. mansoni-infected Biomphalaria glabrata, but the resulting impressive changes were soon reversed.

Writing/erasing 3D micro and nano wrinkles in flexible elastomers for volatile organic compounds sensor

Micro/nano wrinkled patterns on cross-linked urethane/urea polymeric flexible free standing films with two soft segments, polypropylene oxide and polybutadiene, can be induced by UV-irradiation. The ability to write/erase these 3D structures, in a controlled manner, is the main focus of this work. The imprinting of the wrinkled structures was accomplished by swelling in an appropriate solvent followed by drying the membranes after the cross-linking process and UV irradiation. The surface tailoring of the elastomeric membranes was imaged by optical microscopy, scanning electronic microscopy and by atomic force microscopy. To erase the wrinkled structures the elastomers were swollen. The swelling as well as the sol/gel fraction and the UV radiation were tuned in order to control the wrinkles characteristics. It was found that the wrinkles wavelength, in the order of microns (1±0,25μm), was stamped by the UV radiation intensity and exposure time while the wrinkles' amplitude, in the order of nanometers (150-450 nm), was highly dependent on the swelling and sol/gel fraction. A prototype for volatile organic compounds detection was developed taking advantage of the unique 3D micro/nano wrinkles features.

Parasitological stool sample exam by spontaneous sedimentation method using conical tubes: effectiveness, practice, and biosafety

INTRODUCTION: Spontaneous sedimentation is an important procedure for stool examination. A modification of this technique using conical tubes was performed and evaluated. METHODS: Fifty fecal samples were processed in sedimentation glass and in polypropylene conical tubes. Another 50 samples were used for quantitative evaluation of protozoan cysts. RESULTS: Although no significant differences occurred in the frequency of protozoa and helminths detected, significant differences in protozoan cyst counts did occur. CONCLUSIONS: The use of tube predicts a shorter path in the sedimentation of the sample, increases concentration of parasites for microscopy analysis, minimizes the risks of contamination, reduces the odor, and optimizes the workspace.