Inhibitor of cytochrome c messenger RNA -protein interaction in stimulated rat skeletal muscle

The purpose of this work was to examine the possible mechanisms for the regulation of cytochrome c gene expression in response to increased contractile activity in rat skeletal muscle. The working hypothesis was that increased contractile activity enhances cytochrome c gene expression through a cis-element. A 110% increase in cytochrome c mRNA concentration was observed in tibialis anterior (TA) muscle after 9 days of chronic stimulation. Similar difference (120%) exists between soleus (SO) muscle of higher contractile activity and white vastus lateralis (WV) muscle of lower contractile activity. These results suggest that the endogenous cytochrome c gene expression is regulated by contractile activity. Cytochrome c-reporter genes were injected into skeletal muscles to identify the cis-element that is responsible for the regulation. Although the data was inconclusive, part of it suggested the importance of the 3$\sp\prime$-untranslated region (3$\sp\prime$-UTR) in mediating the response to increased contractile activity.^ RNA gel mobility shift (GMSA) and ultraviolet (UV) cross-linking assays revealed specific RNA-protein interaction in a 50-nucleotide region of the 3$\sp\prime$-UTR in unstimulated TA muscle. Computer analysis predicted a stem-loop structure of 17 nucleotides, which provides a structural basis for RNA-protein interaction. These 17 nucleotides are 100% conserved among rat, mouse and human cytochrome c genes and their 13 pseudogenes, suggesting a functional role for this region. The RNA-protein interaction was significantly less in highly active SO muscle than in inactive WV muscle and was dramatically decreased in stimulated TA muscle due to a protein inhibitor(s) associated with ribosome. It is possible that cytochrome c mRNAs undergoing translation are subject to a compartmentalized regulatory influence.^ The conclusion from these results is that increases in contractile activity induce or activate a protein inhibitor(s) associated with ribosome in rat skeletal muscle. The inhibitor decreases RNA-protein interaction in the 3$\sp\prime$-UTR of cytochrome c mRNA, which may result in increased mRNA stability and/or translation. ^

Artificial Neural Nets with Interaction of Afferents

The aim is to obtain computationally more powerful, neuro physiologically founded, artificial neurons and neural nets. Artificial Neural Nets (ANN) of the Perceptron type evolved from the original proposal by McCulloch an Pitts classical paper [1]. Essentially, they keep the computing structure of a linear machine followed by a non linear operation. The McCulloch-Pitts formal neuron (which was never considered by the author’s to be models of real neurons) consists of the simplest case of a linear computation of the inputs followed by a threshold. Networks of one layer cannot compute anylogical function of the inputs, but only those which are linearly separable. Thus, the simple exclusive OR (contrast detector) function of two inputs requires two layers of formal neurons

Models for Lateral Dynamic Interaction of High-Speed Trains and Bridges

In this work a methodology for analysing the lateral coupled behavior of large viaducts and high-speed trains is proposed. The finite element method is used for the structure, multibody techniques are applied for vehicles and the interaction between them is established introducing wheel-rail nonlinear contact forces. This methodology is applied for the analysis of the railway viaduct of the R´ıo Barbantino, which is a very long and tall bridge in the north-west spanish high-speed line.

Anticorrelation between Ion Acceleration and Nonlinear Coherent Structures from Laser-Underdense Plasma Interaction

In laser-plasma experiments, we observed that ion acceleration from the Coulomb explosion of the plasma channel bored by the laser, is prevented when multiple plasma instabilities such as filamentation and hosing, and nonlinear coherent structures (vortices/post-solitons) appear in the wake of an ultrashort laser pulse. The tailoring of the longitudinal plasma density ramp allows us to control the onset of these insabilities. We deduced that the laser pulse is depleted into these structures in our conditions, when a plasma at about 10% of the critical density exhibits a gradient on the order of 250 {\mu}m (gaussian fit), thus hindering the acceleration. A promising experimental setup with a long pulse is demonstrated enabling the excitation of an isolated coherent structure for polarimetric measurements and, in further perspectives, parametric studies of ion plasma acceleration efficiency.

Application of backend database contents and structure to the design of spoken dialog services

Current development platforms for designing spoken dialog services feature different kinds of strategies to help designers build, test, and deploy their applications. In general, these platforms are made up of several assistants that handle the different design stages (e.g. definition of the dialog flow, prompt and grammar definition, database connection, or to debug and test the running of the application). In spite of all the advances in this area, in general the process of designing spoken-based dialog services is a time consuming task that needs to be accelerated. In this paper we describe a complete development platform that reduces the design time by using different types of acceleration strategies based on using information from the data model structure and database contents, as well as cumulative information obtained throughout the successive steps in the design. Thanks to these accelerations, the interaction with the platform is simplified and the design is reduced, in most cases, to simple confirmations to the “proposals” that the platform automatically provides at each stage. Different kinds of proposals are available to complete the application flow such as the possibility of selecting which information slots should be requested to the user together, predefined templates for common dialogs, the most probable actions that make up each state defined in the flow, different solutions to solve specific speech-modality problems such as the presentation of the lists of retrieved results after querying the backend database. The platform also includes accelerations for creating speech grammars and prompts, and the SQL queries for accessing the database at runtime. Finally, we will describe the setup and results obtained in a simultaneous summative, subjective and objective evaluations with different designers used to test the usability of the proposed accelerations as well as their contribution to reducing the design time and interaction.

In situ control of the GE(100)surface domain structure for III-V multijunction solar cells

Vicinal Ge(100) is the common substrate for state of the art multi-junction solar cells grown by metal-organic vapor phase epitaxy (MOVPE). While triple junction solar cells based on Ge(100) present efficiencies mayor que 40%, little is known about the microscopic III-V/Ge(100) nucleation and its interface formation. A suitable Ge(100) surface preparation prior to heteroepitaxy is crucial to achieve low defect densities in the III-V epilayers. Formation of single domain surfaces with double layer steps is required to avoid anti-phase domains in the III-V films. The step formation processes in MOVPE environment strongly depends on the major process parameters such as substrate temperature, H2 partial pressure, group V precursors [1], and reactor conditions. Detailed investigation of these processes on the Ge(100) surface by ultrahigh vacuum (UHV) based standard surface science tools are complicated due to the presence of H2 process gas. However, in situ surface characterization by reflection anisotropy spectroscopy (RAS) allowed us to study the MOVPE preparation of Ge(100) surfaces directly in dependence on the relevant process parameters [2, 3, 4]. A contamination free MOVPE to UHV transfer system [5] enabled correlation of the RA spectra to results from UHV-based surface science tools. In this paper, we established the characteristic RA spectra of vicinal Ge(100) surfaces terminated with monohydrides, arsenic and phosphorous. RAS enabled in situ control of oxide removal, H2 interaction and domain formation during MOVPE preparation.

User Experience in Human-Technology Interaction. Communication, context and evaluation methodology

En esta Tesis se presentan dos líneas de investigación relacionadas y que contribuyen a las áreas de Interacción Hombre-Tecnología (o Máquina; siglas en inglés: HTI o HMI), lingüística computacional y evaluación de la experiencia del usuario. Las dos líneas en cuestión son el diseño y la evaluación centrada en el usuario de sistemas de Interacción Hombre-Máquina avanzados. En la primera parte de la Tesis (Capítulos 2 a 4) se abordan cuestiones fundamentales del diseño de sistemas HMI avanzados. El Capítulo 2 presenta una panorámica del estado del arte de la investigación en el ámbito de los sistemas conversacionales multimodales, con la que se enmarca el trabajo de investigación presentado en el resto de la Tesis. Los Capítulos 3 y 4 se centran en dos grandes aspectos del diseño de sistemas HMI: un gestor del diálogo generalizado para tratar la Interacción Hombre-Máquina multimodal y sensible al contexto, y el uso de agentes animados personificados (ECAs) para mejorar la robustez del diálogo, respectivamente. El Capítulo 3, sobre gestión del diálogo, aborda el tratamiento de la heterogeneidad de la información proveniente de las modalidades comunicativas y de los sensores externos. En este capítulo se propone, en un nivel de abstracción alto, una arquitectura para la gestión del diálogo con influjos heterogéneos de información, apoyándose en el uso de State Chart XML. En el Capítulo 4 se presenta una contribución a la representación interna de intenciones comunicativas, y su traducción a secuencias de gestos a ejecutar por parte de un ECA, diseñados específicamente para mejorar la robustez en situaciones de diálogo críticas que pueden surgir, por ejemplo, cuando se producen errores de entendimiento en la comunicación entre el usuario humano y la máquina. Se propone, en estas páginas, una extensión del Functional Mark-up Language definido en el marco conceptual SAIBA. Esta extensión permite representar actos comunicativos que realizan intenciones del emisor (la máquina) que no se pretende sean captadas conscientemente por el receptor (el usuario humano), pero con las que se pretende influirle a éste e influir el curso del diálogo. Esto se consigue mediante un objeto llamado Base de Intenciones Comunicativas (en inglés, Communication Intention Base, o CIB). La representación en el CIB de intenciones “no claradas” además de las explícitas permite la construcción de actos comunicativos que realizan simultáneamente varias intenciones comunicativas. En el Capítulo 4 también se describe un sistema experimental para el control remoto (simulado) de un asistente domótico, con autenticación de locutor para dar acceso, y con un ECA en el interfaz de cada una de estas tareas. Se incluye una descripción de las secuencias de comportamiento verbal y no verbal de los ECAs, que fueron diseñados específicamente para determinadas situaciones con objeto de mejorar la robustez del diálogo. Los Capítulos 5 a 7 conforman la parte de la Tesis dedicada a la evaluación. El Capítulo 5 repasa antecedentes relevantes en la literatura de tecnologías de la información en general, y de sistemas de interacción hablada en particular. Los principales antecedentes en el ámbito de la evaluación de la interacción sobre los cuales se ha desarrollado el trabajo presentado en esta Tesis son el Technology Acceptance Model (TAM), la herramienta Subjective Assessment of Speech System Interfaces (SASSI), y la Recomendación P.851 de la ITU-T. En el Capítulo 6 se describen un marco y una metodología de evaluación aplicados a la experiencia del usuario con sistemas HMI multimodales. Se desarrolló con este propósito un novedoso marco de evaluación subjetiva de la calidad de la experiencia del usuario y su relación con la aceptación por parte del mismo de la tecnología HMI (el nombre dado en inglés a este marco es Subjective Quality Evaluation Framework). En este marco se articula una estructura de clases de factores subjetivos relacionados con la satisfacción y aceptación por parte del usuario de la tecnología HMI propuesta. Esta estructura, tal y como se propone en la presente tesis, tiene dos dimensiones ortogonales. Primero se identifican tres grandes clases de parámetros relacionados con la aceptación por parte del usuario: “agradabilidad ” (likeability: aquellos que tienen que ver con la experiencia de uso, sin entrar en valoraciones de utilidad), rechazo (los cuales sólo pueden tener una valencia negativa) y percepción de utilidad. En segundo lugar, este conjunto clases se reproduce para distintos “niveles, o focos, percepción del usuario”. Éstos incluyen, como mínimo, un nivel de valoración global del sistema, niveles correspondientes a las tareas a realizar y objetivos a alcanzar, y un nivel de interfaz (en los casos propuestos en esta tesis, el interfaz es un sistema de diálogo con o sin un ECA). En el Capítulo 7 se presenta una evaluación empírica del sistema descrito en el Capítulo 4. El estudio se apoya en los mencionados antecedentes en la literatura, ampliados con parámetros para el estudio específico de los agentes animados (los ECAs), la auto-evaluación de las emociones de los usuarios, así como determinados factores de rechazo (concretamente, la preocupación por la privacidad y la seguridad). También se evalúa el marco de evaluación subjetiva de la calidad propuesto en el capítulo anterior. Los análisis de factores efectuados revelan una estructura de parámetros muy cercana conceptualmente a la división de clases en utilidad-agradabilidad-rechazo propuesta en dicho marco, resultado que da cierta validez empírica al marco. Análisis basados en regresiones lineales revelan estructuras de dependencias e interrelación entre los parámetros subjetivos y objetivos considerados. El efecto central de mediación, descrito en el Technology Acceptance Model, de la utilidad percibida sobre la relación de dependencia entre la intención de uso y la facilidad de uso percibida, se confirma en el estudio presentado en la presente Tesis. Además, se ha encontrado que esta estructura de relaciones se fortalece, en el estudio concreto presentado en estas páginas, si las variables consideradas se generalizan para cubrir más ampliamente las categorías de agradabilidad y utilidad contempladas en el marco de evaluación subjetiva de calidad. Se ha observado, asimismo, que los factores de rechazo aparecen como un componente propio en los análisis de factores, y además se distinguen por su comportamiento: moderan la relación entre la intención de uso (que es el principal indicador de la aceptación del usuario) y su predictor más fuerte, la utilidad percibida. Se presentan también resultados de menor importancia referentes a los efectos de los ECAs sobre los interfaces de los sistemas de diálogo y sobre los parámetros de percepción y las valoraciones de los usuarios que juegan un papel en conformar su aceptación de la tecnología. A pesar de que se observa un rendimiento de la interacción dialogada ligeramente mejor con ECAs, las opiniones subjetivas son muy similares entre los dos grupos experimentales (uno interactuando con un sistema de diálogo con ECA, y el otro sin ECA). Entre las pequeñas diferencias encontradas entre los dos grupos destacan las siguientes: en el grupo experimental sin ECA (es decir, con interfaz sólo de voz) se observó un efecto más directo de los problemas de diálogo (por ejemplo, errores de reconocimiento) sobre la percepción de robustez, mientras que el grupo con ECA tuvo una respuesta emocional más positiva cuando se producían problemas. Los ECAs parecen generar inicialmente expectativas más elevadas en cuanto a las capacidades del sistema, y los usuarios de este grupo se declaran más seguros de sí mismos en su interacción. Por último, se observan algunos indicios de efectos sociales de los ECAs: la “amigabilidad ” percibida los ECAs estaba correlada con un incremento la preocupación por la seguridad. Asimismo, los usuarios del sistema con ECAs tendían más a culparse a sí mismos, en lugar de culpar al sistema, de los problemas de diálogo que pudieran surgir, mientras que se observó una ligera tendencia opuesta en el caso de los usuarios del sistema con interacción sólo de voz. ABSTRACT This Thesis presents two related lines of research work contributing to the general fields of Human-Technology (or Machine) Interaction (HTI, or HMI), computational linguistics, and user experience evaluation. These two lines are the design and user-focused evaluation of advanced Human-Machine (or Technology) Interaction systems. The first part of the Thesis (Chapters 2 to 4) is centred on advanced HMI system design. Chapter 2 provides a background overview of the state of research in multimodal conversational systems. This sets the stage for the research work presented in the rest of the Thesis. Chapers 3 and 4 focus on two major aspects of HMI design in detail: a generalised dialogue manager for context-aware multimodal HMI, and embodied conversational agents (ECAs, or animated agents) to improve dialogue robustness, respectively. Chapter 3, on dialogue management, deals with how to handle information heterogeneity, both from the communication modalities or from external sensors. A highly abstracted architectural contribution based on State Chart XML is proposed. Chapter 4 presents a contribution for the internal representation of communication intentions and their translation into gestural sequences for an ECA, especially designed to improve robustness in critical dialogue situations such as when miscommunication occurs. We propose an extension of the functionality of Functional Mark-up Language, as envisaged in much of the work in the SAIBA framework. Our extension allows the representation of communication acts that carry intentions that are not for the interlocutor to know of, but which are made to influence him or her as well as the flow of the dialogue itself. This is achieved through a design element we have called the Communication Intention Base. Such r pr s ntation of “non- clar ” int ntions allows th construction of communication acts that carry several communication intentions simultaneously. Also in Chapter 4, an experimental system is described which allows (simulated) remote control to a home automation assistant, with biometric (speaker) authentication to grant access, featuring embodied conversation agents for each of the tasks. The discussion includes a description of the behavioural sequences for the ECAs, which were designed for specific dialogue situations with particular attention given to the objective of improving dialogue robustness. Chapters 5 to 7 form the evaluation part of the Thesis. Chapter 5 reviews evaluation approaches in the literature for information technologies, as well as in particular for speech-based interaction systems, that are useful precedents to the contributions of the present Thesis. The main evaluation precedents on which the work in this Thesis has built are the Technology Acceptance Model (TAM), the Subjective Assessment of Speech System Interfaces (SASSI) tool, and ITU-T Recommendation P.851. Chapter 6 presents the author’s work in establishing an valuation framework and methodology applied to the users’ experience with multimodal HMI systems. A novel user-acceptance Subjective Quality Evaluation Framework was developed by the author specifically for this purpose. A class structure arises from two orthogonal sets of dimensions. First we identify three broad classes of parameters related with user acceptance: likeability factors (those that have to do with the experience of using the system), rejection factors (which can only have a negative valence) and perception of usefulness. Secondly, the class structure is further broken down into several “user perception levels”; at the very least: an overall system-assessment level, task and goal-related levels, and an interface level (e.g., a dialogue system with or without an ECA). An empirical evaluation of the system described in Chapter 4 is presented in Chapter 7. The study was based on the abovementioned precedents in the literature, expanded with categories covering the inclusion of an ECA, the users’ s lf-assessed emotions, and particular rejection factors (privacy and security concerns). The Subjective Quality Evaluation Framework proposed in the previous chapter was also scrutinised. Factor analyses revealed an item structure very much related conceptually to the usefulness-likeability-rejection class division introduced above, thus giving it some empirical weight. Regression-based analysis revealed structures of dependencies, paths of interrelations, between the subjective and objective parameters considered. The central mediation effect, in the Technology Acceptance Model, of perceived usefulness on the dependency relationship of intention-to-use with perceived ease of use was confirmed in this study. Furthermore, the pattern of relationships was stronger for variables covering more broadly the likeability and usefulness categories in the Subjective Quality Evaluation Framework. Rejection factors were found to have a distinct presence as components in factor analyses, as well as distinct behaviour: they were found to moderate the relationship between intention-to-use (the main measure of user acceptance) and its strongest predictor, perceived usefulness. Insights of secondary importance are also given regarding the effect of ECAs on the interface of spoken dialogue systems and the dimensions of user perception and judgement attitude that may have a role in determining user acceptance of the technology. Despite observing slightly better performance values in the case of the system with the ECA, subjective opinions regarding both systems were, overall, very similar. Minor differences between two experimental groups (one interacting with an ECA, the other only through speech) include a more direct effect of dialogue problems (e.g., non-understandings) on perceived dialogue robustness for the voice-only interface test group, and a more positive emotional response for the ECA test group. Our findings further suggest that the ECA generates higher initial expectations, and users seem slightly more confident in their interaction with the ECA than do those without it. Finally, mild evidence of social effects of ECAs was also found: the perceived friendliness of the ECA increased security concerns, and ECA users may tend to blame themselves rather than the system when dialogue problems are encountered, while the opposite may be true for voice-only users.

Modifications in the Dynamic Properties of a Structure due to Human Actions

The interest for modelling of human actions acting on structures has been recurrent since the first accidents on suspension bridges in the nineteenth century such as Broughton (1831) in the U.K. or Angers (1850) in France. Stadiums, gymnasiums are other types of structure where human induced vibration is very important. In these structures a particular phenomenon appears such as the interaction personstructure (lock-in), the person-person synchronization, and the influence of the mass and damping of the people in the structural behaviour. This paper focuses on the latter topic. In order to evaluate these property modifications several tests have been carried out on a stand-alone building. For the test an electro-dynamic shaker was installed at a fixed point of the gym slab and different groups of people were located around the shaker. The dynamic characteristics of the structure without people inside have been calculated by two methods: using a three-dimensional finite element model of the building and by operational modal analysis. These calculated experimental and numerical values are the reference values used to evaluate the modifications in the dynamic properties of the structure.

Polymer interaction with macroscopic carbon nanotube fibres and fabrication of nanostructured composites

El ensamblado de nanotubos de carbono (CNT) como una fibra macroscópica en la cual están orientados preferentemente paralelos entre sí y al eje de la fibra, ha dado como resultado un nuevo tipo de fibra de altas prestaciones derivadas de la explotación eficiente de las propiedades axiales de los CNTs, y que tiene un gran número de aplicaciones potenciales. Fibras continuas de CNTs se produjeron en el Instituto IMDEA Materiales mediante el proceso de hilado directo durante la reacción de síntesis por deposición química de vapores. Uno de los objetivos de esta tesis es el estudio de la estructura de estas fibras mediante técnicas del estado del arte de difracción de rayos X de sincrotrón y la elaboración de un modelo estructural de dicho material. Mediciones texturales de adsorción de gases, análisis de micrografías de electrones y dispersión de rayos X de ángulo alto y bajo (WAXS/SAXS) indican que el material tiene una estructura mesoporosa con una distribución de tamaño de poros ancha derivada del amplio rango de separaciones entre manojos de CNTs, así como una superficie específica de 170m2/g. Los valores de dimensión fractal obtenidos mediante SAXS y análisis Barrett-Joyner-Halenda (BJH) de mediciones texturales coinciden en 2.4 y 2.5, respectivamente, resaltando el carácter de red de la estructura de dichas fibras. La estructura mesoporosa y tipo hilo de las fibra de CNT es accesible a la infiltración de moléculas externas (líquidos o polímeros). En este trabajo se estudian los cambios en la estructura multiescala de las fibras de CNTs al interactuar con líquidos y polímeros. Los efectos de la densificación en la estructura de fibras secas de CNT son estudiados mediante WAXS/SAXS. El tratamiento de densificación junta los manojos de la fibra (los poros disminuyen de tamaño), resultando en un incremento de la densidad de la fibra. Sin embargo, los dominios estructurales correspondientes a la transferencia de esfuerzo mecánica y carga eléctrica en los nanotubos no son afectados durante este proceso de densificación; como consecuencia no se produce un efecto sustancial en las propiedades mecánicas y eléctricas. Mediciones de SAXS and fibra de CNT antes y después de infiltración de líquidos confirman la penetración de una gran cantidad de líquidos que llena los poros internos de la fibra pero no se intercalan entre capas de nanotubos adyacentes. La infiltración de cadenas poliméricas de bajo peso molecular tiende a expandir los manojos en la fibra e incrementar el ángulo de apertura de los poros. Los resultados de SAXS indican que la estructura interna de la fibra en términos de la organización de las capas de tubos y su orientación no es afectada cuando las muestras consisten en fibras infiltradas con polímeros de alto peso molecular. La cristalización de varios polímeros semicristalinos es acelerada por la presencia de fibras de CNTs alineados y produce el crecimiento de una capa transcristalina normal a la superficie de la fibra. Esto es observado directamente mediante microscopía óptica polarizada, y detectado mediante calorimetría DSC. Las lamelas en la capa transcristalina tienen orientación de la cadena polimérica paralela a la fibra y por lo tanto a los nanotubos, de acuerdo con los patrones de WAXS. Esta orientación preferencial se sugiere como parte de la fuerza impulsora en la nucleación. La nucleación del dominio cristalino polimérico en la superficie de los CNT no es epitaxial. Ocurre sin haber correspondencia entre las estructuras cristalinas del polímero y los nanotubos. Estas observaciones contribuyen a la compresión del fenómeno de nucleación en CNTs y otros nanocarbonos, y sientan las bases para el desarrollo de composites poliméricos de gran escala basados en fibra larga de CNTs alineados. ABSTRACT The assembly of carbon nanotubes into a macroscopic fibre material where they are preferentially aligned parallel to each other and to the fibre axis has resulted in a new class of high-performance fibres, which efficiently exploits the axial properties of the building blocks and has numerous applications. Long, continuous CNT fibres were produced in IMDEA Materials Institute by direct fibre spinning from a chemical vapour deposition reaction. These fibres have a complex hierarchical structure covering multiple length scales. One objective of this thesis is to reveal this structure by means of state-of-the-art techniques such as synchrotron X-ray diffraction, and to build a model to link the fibre structural elements. Texture and gas absorption measurements, using electron microscopy, wide angle and small angle X-ray scattering (WAXS/SAXS), and pore size distribution analysis by Barrett-Joyner-Halenda (BJH), indicate that the material has a mesoporous structure with a wide pore size distribution arising from the range of fibre bundle separation, and a high surface area _170m2/g. Fractal dimension values of 2.4_2.5 obtained from the SAXS and BJH measurements highlight the network structure of the fibre. Mesoporous and yarn-like structure of CNT fibres make them accessible to the infiltration of foreign molecules (liquid or polymer). This work studies multiscale structural changes when CNT fibres interact with liquids and polymers. The effects of densification on the structure of dry CNT fibres were measured by WAXS/SAXS. The densification treatment brings the fibre bundles closer (pores become smaller), leading to an increase in fibre density. However, structural domains made of the load and charge carrying nanotubes are not affected; consequently, it has no substantial effect on mechanical and electrical properties. SAXS measurements on the CNT fibres before and after liquid infiltration imply that most liquids are able to fill the internal pores but not to intercalate between nanotubes. Successful infiltration of low molecular weight polymer chains tends to expand the fibre bundles and increases the pore-opening angle. SAXS results indicate that the inner structure of the fibre, in terms of the nanotube layer arrangement and the fibre alignment, are not largely affected when infiltrated with polymers of relatively high molecular weight. The crystallisation of a variety of semicrystalline polymers is accelerated by the presence of aligned fibres of CNTs and results in the growth of a transcrystalline layer perpendicular to the fibre surface. This can be observed directly under polarised optical microscope, and detected by the exothermic peaks during differential scanning calorimetry. The discussion on the driving forces for the enhanced nucleation points out the preferential chain orientation of polymer lamella with the chain axis parallel to the fibre and thus to the nanotubes, which is confirmed by two-dimensional WAXS patterns. A non-epitaxial polymer crystal growth habit at the CNT-polymer interface is proposed, which is independent of lattice matching between the polymer and nanotubes. These findings contribute to the discussion on polymer nucleation on CNTs and other nanocarbons, and their implication for the development of large polymer composites based on long and aligned fibres of CNTs.

Vortex-induced vibrations on bridges : the interaction mechanism in complex sections and a new proposed semi-empirical model

El presente trabajo de investigación se ocupa del estudio de las vibraciones verticales inducidas por vórtices (VIV) en aquellos puentes que, por sus características geométricas y propiedades dinámicas, muestran cierta sensibilidad este tipo de fenómeno aeroelástico. El objeto principal es el análisis del mecanismo de interacción viento-estructura sobre secciones no fuseladas de geometría simple, con objeto de realizar una adecuada caracterización del problema y poder abordar posteriormente el análisis de otras secciones de geometría más compleja, representativas de los principales elementos estructurales de los puentes, como arcos, tableros, torres y pilas. Este aspecto es fundamental durante la fase de diseño del puente, donde deberán tenerse en cuenta también una serie de detalles que pueden influir significativamente su sensibilidad ante problemas aerodinámicos, como la morfología y dimensiones principales de la sección transversal del tablero, la disposición de barreras de seguridad y barreras cortaviento, o las riostras que unen diferentes elementos estructurales. La configuración de dos elementos en tándem o la construcción de un puente en las inmediaciones de otro existente son otros aspectos a considerar respecto a la sensibilidad frente a efectos aeroelásticos. El estudio se ha llevado a cabo principalmente mediante la implementación de simulaciones numéricas que reproducen la interacción entre la corriente de aire y secciones representativas de modelos estructurales, a partir de un código CFD basado en el método de las partículas de vórtices (VPM), siguiendo por tanto un esquema Lagrangiano. Los resultados han sido validados con datos experimentales existentes, valores procedentes de ensayos en túnel de viento y registros reales a partir de diferentes casos de estudio: Alconétar (2006), Niterói (1980), Trans- Tokyo Bay (1995) y Volgogrado (2010). Finalmente, se propone un modelo semi-empírico para la estimación del rango de velocidades críticas y amplitudes de oscilación basado en la utilización de las derivadas de flameo de Scanlan, y la densidad espectral de las fuerzas aerodinámicas en el dominio de la frecuencia. The present research work concerns the study of vertical vortex-induced vibrations (VIV) in bridges which show certain sensitivity to this type of aeroelastic phenomenon. It focuses on the analysis of the wind-structure interaction mechanism on bluff sections, with the objective of making a good characterisation of the problem and subsequently addressing the analysis of sections with a complex geometry, which are representative of the bridge structural elements, such as arches, decks, towers and piers. This issue is of relative importance during the bridge design phase, since minor details of the aforementioned elements can significantly influence its sensitivity to aerodynamic problems. The shape and main dimensions of the deck cross section, the addition of safety barriers and windshields, the presence of braces to enhance the structure mechanical properties, the utilisation of cross sections in tandem arrangement, or the erection of a new bridge in the vicinity of another existing one are some of the aspects to be considered regarding the sensitivity to the aeroelastic effects. The study has been carried out mainly through the implementation of numerical simulations that reproduces the interaction between the airflow and the representative cross section of a structural bridge model, by the use of a CFD code based on the vortex particle method (VPM), thus following a Lagrangian scheme. The results have been validated with existing experimental data, values from wind tunnel tests and full scale observations from the different case studies: Alconétar (2006), Niterói (1980), Trans-Tokyo Bay (1995) and Volgograd (2010). Finally, a new semi-empirical model is proposed for the estimation of the critical wind velocity ranges and oscillation amplitudes based on the use of the Scanlan’s flutter derivatives and the power spectral density of aerodynamic force time history in the frequency domain.

VHDL-based system design of a cognitive sensorimotor loop (CSL) for haptic Human-Machine Interaction (HMI)

This document is a summary of the Bachelor thesis titled “VHDL-Based System Design of a Cognitive Sensorimotor Loop (CSL) for Haptic Human-Machine Interaction (HMI)” written by Pablo de Miguel Morales, Electronics Engineering student at the Universidad Politécnica de Madrid (UPM Madrid, Spain) during an Erasmus+ Exchange Program at the Beuth Hochschule für Technik (BHT Berlin, Germany). The tutor of this project is Dr. Prof. Hild. This project has been developed inside the Neurobotics Research Laboratory (NRL) in close collaboration with Benjamin Panreck, a member of the NRL, and another exchange student from the UPM Pablo Gabriel Lezcano. For a deeper comprehension of the content of the thesis, a deeper look in the document is needed as well as the viewing of the videos and the VHDL design. In the growing field of automation, a large amount of workforce is dedicated to improve, adapt and design motor controllers for a wide variety of applications. In the specific field of robotics or other machinery designed to interact with humans or their environment, new needs and technological solutions are often being discovered due to the existing, relatively unexplored new scenario it is. The project consisted of three main parts: Two VHDL-based systems and one short experiment on the haptic perception. Both VHDL systems are based on a Cognitive Sensorimotor Loop (CSL) which is a control loop designed by the NRL and mainly developed by Dr. Prof. Hild. The CSL is a control loop whose main characteristic is the fact that it does not use any external sensor to measure the speed or position of the motor but the motor itself. The motor always generates a voltage that is proportional to its angular speed so it does not need calibration. This method is energy efficient and simplifies control loops in complex systems. The first system, named CSL Stay In Touch (SIT), consists in a one DC motor system controller by a FPGA Board (Zynq ZYBO 7000) whose aim is to keep contact with any external object that touches its Sensing Platform in both directions. Apart from the main behavior, three features (Search Mode, Inertia Mode and Return Mode) have been designed to enhance the haptic interaction experience. Additionally, a VGA-Screen is also controlled by the FPGA Board for the monitoring of the whole system. This system has been completely developed, tested and improved; analyzing its timing and consumption properties. The second system, named CSL Fingerlike Mechanism (FM), consists in a fingerlike mechanical system controlled by two DC motors (Each controlling one part of the finger). The behavior is similar to the first system but in a more complex structure. This system was optional and not part of the original objectives of the thesis and it could not be properly finished and tested due to the lack of time. The haptic perception experiment was an experiment conducted to have an insight into the complexity of human haptic perception in order to implement this knowledge into technological applications. The experiment consisted in testing the capability of the subjects to recognize different objects and shapes while being blindfolded and with their ears covered. Two groups were done, one had full haptic perception while the other had to explore the environment with a plastic piece attached to their finger to create a haptic handicap. The conclusion of the thesis was that a haptic system based only on a CSL-based system is not enough to retrieve valuable information from the environment and that other sensors are needed (temperature, pressure, etc.) but that a CSL-based system is very useful to control the force applied by the system to interact with haptic sensible surfaces such as skin or tactile screens. RESUMEN. Este documento es un resumen del proyecto fin de grado titulado “VHDL-Based System Design of a Cognitive Sensorimotor Loop (CSL) for Haptic Human-Machine Interaction (HMI)” escrito por Pablo de Miguel, estudiante de Ingeniería Electrónica de Comunicaciones en la Universidad Politécnica de Madrid (UPM Madrid, España) durante un programa de intercambio Erasmus+ en la Beuth Hochschule für Technik (BHT Berlin, Alemania). El tutor de este proyecto ha sido Dr. Prof. Hild. Este proyecto se ha desarrollado dentro del Neurorobotics Research Laboratory (NRL) en estrecha colaboración con Benjamin Panreck (un miembro del NRL) y con Pablo Lezcano (Otro estudiante de intercambio de la UPM). Para una comprensión completa del trabajo es necesaria una lectura detenida de todo el documento y el visionado de los videos y análisis del diseño VHDL incluidos en el CD adjunto. En el creciente sector de la automatización, una gran cantidad de esfuerzo está dedicada a mejorar, adaptar y diseñar controladores de motor para un gran rango de aplicaciones. En el campo específico de la robótica u otra maquinaria diseñada para interactuar con los humanos o con su entorno, nuevas necesidades y soluciones tecnológicas se siguen desarrollado debido al relativamente inexplorado y nuevo escenario que supone. El proyecto consta de tres partes principales: Dos sistemas basados en VHDL y un pequeño experimento sobre la percepción háptica. Ambos sistemas VHDL están basados en el Cognitive Sesnorimotor Loop (CSL) que es un lazo de control creado por el NRL y cuyo desarrollador principal ha sido Dr. Prof. Hild. El CSL es un lazo de control cuya principal característica es la ausencia de sensores externos para medir la velocidad o la posición del motor, usando el propio motor como sensor. El motor siempre genera un voltaje proporcional a su velocidad angular de modo que no es necesaria calibración. Este método es eficiente en términos energéticos y simplifica los lazos de control en sistemas complejos. El primer sistema, llamado CSL Stay In Touch (SIT), consiste en un sistema formado por un motor DC controlado por una FPGA Board (Zynq ZYBO 7000) cuyo objetivo es mantener contacto con cualquier objeto externo que toque su plataforma sensible en ambas direcciones. Aparte del funcionamiento básico, tres modos (Search Mode, Inertia Mode y Return Mode) han sido diseñados para mejorar la interacción. Adicionalmente, se ha diseñado el control a través de la FPGA Board de una pantalla VGA para la monitorización de todo el sistema. El sistema ha sido totalmente desarrollado, testeado y mejorado; analizando su propiedades de timing y consumo energético. El segundo sistema, llamado CSL Fingerlike Mechanism (FM), consiste en un mecanismo similar a un dedo controlado por dos motores DC (Cada uno controlando una falange). Su comportamiento es similar al del primer sistema pero con una estructura más compleja. Este sistema no formaba parte de los objetivos iniciales del proyecto y por lo tanto era opcional. No pudo ser plenamente desarrollado debido a la falta de tiempo. El experimento de percepción háptica fue diseñado para profundizar en la percepción háptica humana con el objetivo de aplicar este conocimiento en aplicaciones tecnológicas. El experimento consistía en testear la capacidad de los sujetos para reconocer diferentes objetos, formas y texturas en condiciones de privación del sentido del oído y la vista. Se crearon dos grupos, en uno los sujetos tenían plena percepción háptica mientras que en el otro debían interactuar con los objetos a través de una pieza de plástico para generar un hándicap háptico. La conclusión del proyecto fue que un sistema háptico basado solo en sistemas CSL no es suficiente para recopilar información valiosa del entorno y que debe hacer uso de otros sensores (temperatura, presión, etc.). En cambio, un sistema basado en CSL es idóneo para el control de la fuerza aplicada por el sistema durante la interacción con superficies hápticas sensibles tales como la piel o pantallas táctiles.

The structure of the two amino-terminal domains of human ICAM-1 suggests how it functions as a rhinovirus receptor and as an LFA-1 integrin ligand

The normal function of human intercellular adhesion molecule-1 (ICAM-1) is to provide adhesion between endothelial cells and leukocytes after injury or stress. ICAM-1 binds to leukocyte function-associated antigen (LFA-1) or macrophage-1 antigen (Mac-1). However, ICAM-1 is also used as a receptor by the major group of human rhinoviruses and is a catalyst for the subsequent viral uncoating during cell entry. The three-dimensional atomic structure of the two amino-terminal domains (D1 and D2) of ICAM-1 has been determined to 2.2-Å resolution and fitted into a cryoelectron microscopy reconstruction of a rhinovirus–ICAM-1 complex. Rhinovirus attachment is confined to the BC, CD, DE, and FG loops of the amino-terminal Ig-like domain (D1) at the end distal to the cellular membrane. The loops are considerably different in structure to those of human ICAM-2 or murine ICAM-1, which do not bind rhinoviruses. There are extensive charge interactions between ICAM-1 and human rhinoviruses, which are mostly conserved in both major and minor receptor groups of rhinoviruses. The interaction of ICAMs with LFA-1 is known to be mediated by a divalent cation bound to the insertion (I)-domain on the α chain of LFA-1 and the carboxyl group of a conserved glutamic acid residue on ICAMs. Domain D1 has been docked with the known structure of the I-domain. The resultant model is consistent with mutational data and provides a structural framework for the adhesion between these molecules.

A novel glutamine–RNA interaction identified by screening libraries in mammalian cells

The arginine-rich motif provides a versatile framework for RNA recognition in which few amino acids other than arginine are needed to mediate specific binding. Using a mammalian screening system based on transcriptional activation by HIV Tat, we identified novel arginine-rich peptides from combinatorial libraries that bind tightly to the Rev response element of HIV. Remarkably, a single glutamine, but not asparagine, within a stretch of polyarginine can mediate high-affinity binding. These results, together with the structure of a Rev peptide-Rev response element complex, suggest that the carboxamide groups of glutamine or asparagine are well-suited to hydrogen bond to G-A base pairs and begin to establish an RNA recognition code for the arginine-rich motif. The screening approach may provide a relatively general method for screening expression libraries in mammalian cells.

Crystal structure of chemically synthesized [N33A] stromal cell-derived factor 1α, a potent ligand for the HIV-1 “fusin” coreceptor

Stromal cell-derived factor-1α (SDF-1α ) is a member of the chemokine superfamily and functions as a growth factor and chemoattractant through activation of CXCR4/LESTR/Fusin, a G protein-coupled receptor. This receptor also functions as a coreceptor for T-tropic syncytium-inducing strains of HIV-1. SDF-1α antagonizes infectivity of these strains by competing with gp120 for binding to the receptor. The crystal structure of a variant SDF-1α ([N33A]SDF-1α ) prepared by total chemical synthesis has been refined to 2.2-Å resolution. Although SDF-1α adopts a typical chemokine β-β-β-α topology, the packing of the α-helix against the β-sheet is strikingly different. Comparison of SDF-1α with other chemokine structures confirms the hypothesis that SDF-1α may be either an ancestral protein from which all other chemokines evolved or the chemokine that is the least divergent from a primordial chemokine. The structure of SDF-1α reveals a positively charged surface ideal for binding to the negatively charged extracellular loops of the CXCR4 HIV-1 coreceptor. This ionic complementarity is likely to promote the interaction of the mobile N-terminal segment of SDF-1α with interhelical sites of the receptor, resulting in a biological response.

Crystal structure of the BTB domain from PLZF

The BTB domain (also known as the POZ domain) is an evolutionarily conserved protein–protein interaction motif found at the N terminus of 5–10% of C2H2-type zinc-finger transcription factors, as well as in some actin-associated proteins bearing the kelch motif. Many BTB proteins are transcriptional regulators that mediate gene expression through the control of chromatin conformation. In the human promyelocytic leukemia zinc finger (PLZF) protein, the BTB domain has transcriptional repression activity, directs the protein to a nuclear punctate pattern, and interacts with components of the histone deacetylase complex. The association of the PLZF BTB domain with the histone deacetylase complex provides a mechanism of linking the transcription factor with enzymatic activities that regulate chromatin conformation. The crystal structure of the BTB domain of PLZF was determined at 1.9 Å resolution and reveals a tightly intertwined dimer with an extensive hydrophobic interface. Approximately one-quarter of the monomer surface area is involved in the dimer intermolecular contact. These features are typical of obligate homodimers, and we expect the full-length PLZF protein to exist as a branched transcription factor with two C-terminal DNA-binding regions. A surface-exposed groove lined with conserved amino acids is formed at the dimer interface, suggestive of a peptide-binding site. This groove may represent the site of interaction of the PLZF BTB domain with nuclear corepressors or other nuclear proteins.