Dimensionamento de betões autocompactáveis coloridos com agregados britados vulcânicos

A incorporação de pigmentos na composição do betão é uma técnica aplicada como alternativa arquitetónica à pintura ou colocação de revestimentos em edifícios. Tratando-se de um betão à vista importa considerar cuidados adicionais na sua aplicação para assegurar a homogeneidade e qualidade do acabamento superficial. Utilizando betões autocompactáveis, não só a homogeneidade do material é aumentada devido à eliminação da compactação, como também o acabamento superficial é melhorado devido à maior capacidade de preenchimento dos moldes que estes betões apresentam. Neste trabalho dimensionam-se cinco composições de betão autocompactável colorido utilizando agregados britados vulcânicos correntemente utilizados no fabrico de betão na Região Autónoma da Madeira. Para o dimensionamento dos betões, realizaram-se vários estudos em pastas, de seguida em argamassas e finalmente em betões. Com o estudo das pastas obtiveram-se as primeiras informações sobre o efeito da introdução de pigmentos. Depois estudaram-se argamassas que continham o mesmo volume de areia relativo mas incorporando pastas com diferentes cores. Identificaram-se as pastas que conduziam a argamassas com propriedades reológicas semelhantes às da argamassa da composição considerada como referência. Nos betões começou-se por produzir uma composição de betão autocompactável de referência que foi caracterizada em termos de autocompactabilidade pelos ensaios de espalhamento, caixa L, funil V e segregação. Finalmente, realizaram-se composições de betões coloridos cujos conteúdos em agregados e finos eram os mesmos que os da composição de referência mas substituindo parcialmente o volume de água por igual volume de pigmentos. Os resultados mostraram que a incorporação de pigmentos conduz a uma ligeira perda de trabalhabilidade, sendo essa perda de trabalhabilidade facilmente compensada com um aumento da dosagem de superplastificante, cujo volume adicionado é substituído pela remoção de igual volume de água.

Efeito da seca na dinâmica dos grupos funcionais fitoplanctônicos em reservatórios eutróficos do semiárido

Reservoirs are the main sources of surface water in Brazil´s semiarid region. The majority of these water supplies, however, are compromised by eutrophication. A severe drought in 2012 contributed to significant losses in water volume, influencing the availability of resources (nutrients and light) for phytoplankton. The aim of this study is to understand the dynamics of the functional groups of phytoplankton and the factors that affect them during a severe drought in the semiarid reservoirs of the northeast. We therefore studied the Dourado, Gargalheiras and Passagem das Traíras reservoirs in Rio Grande do Norte from January 2012 to January 2013. The effect of drought favoured homogeneity within the reservoir, in relation to biotic and abiotic variables, notably the absence of water supply given the lack of flow from its tributaries (intermittent river). The phytoplankton functional groups of bloomforming cyanobacteria (SN, S1 and M) dominated throughout the year 2012, in both the shallow and deep areas of the three reservoirs studied. The groups were related to high concentrations of volatile solids, total phosphorus and ammonia, and high turbidity. Cylindrospermopsis raciborskii (SN group) was the species with the greatest biomass in the three reservoirs. M group (Sphaerocavum brasiliense) performed better in shallow waters with more available phosphorus. Our data showed that high concentrations of nutrients and low availability of light, besides the stability of the water column due to lack of flow and the system´s high residence time, favoured the dominance of bloom-forming cyanobacteria groups, especially those tolerant to shadow

Efeito da moagem de alta energia na densificação e microestrutura do compósito AI2O3-Cu

The Cu-Al2O3 composite ceramic combines the phase of alumina, which is extremely hard and durable, yet very brittle, to metallic copper phase high ductility and high fracture toughness. These characteristics make this material a strong candidate for use as a cutting tool. Al2O3-Cu composite powders nanocrystalline and high homogeneity can be produced by high energy milling, as well as dense and better mechanical structures can be obtained by liquid phase sintering. This work investigates the effect of high-energy milling the dispersion phase Al2O3, Cu, and the influence of the content of Cu in the formation of Cu-Al2O3 composite particles. A planetary mill Pulverisatte 7 high energy was used to perform the experiments grinding. Al2O3 powder and Cu in the proportion of 5, 10 and 15% by weight of Cu were placed in a container for grinding with balls of hard metal and ethyl alcohol. A mass ratio of balls to powder of 1:5 was used. All powders were milled to 100 hours, and powder samples were collected after 2, 10, 20, 50 and 70 hours of grinding. Composite powders with compact cylindrical shape of 8 mm diameter were pressed and sintered in uniaxial matrix resistive furnace to 1200, 1300 to 1350 °C for 60 minutes under an atmosphere of argon and hydrogen. The heating rate used was 10°C/min. The powders and structures of the sintered bodies were characterized by XRD, SEM and EDS. Analysis TG, DSC and particle size were also used to characterize the milled powders, as well as dilatometry was used to observe the contraction of the sintered bodies. The density of the green and sintered bodies was measured using the geometric method (mass / volume). Vickers microhardness with a load of 500 g for 10 s were performed on sintered structures. The Cu-Al2O3 composite with 5% copper density reached 61% of theoretical density and a hardness of 129 HV when sintered at 1300 ° C for 1h. In contrast, lower densities (59 and 51% of the theoretical density) and hardness (110 HV and 105) were achieved when the copper content increases to 10 and 15%.

Síntese e caracterização de pigmentos nanométricos encapsulados pelos métodos dos precursores poliméricos, hidrotermal de microondas e co-precipitação associado à química sol-gel convencional

The demand for materials with high consistency obtained at relatively low temperatures has been leveraging the search for chemical processes substituents of the conventional ceramic method. This paper aims to obtain nanosized pigments encapsulated (core-shell) the basis of TiO2 doped with transition metals (Fe, Co, Ni, Al) through three (3) methods of synthesis: polymeric precursors (Pechini); hydrothermal microwave, and co-precipitation associated with the sol-gel chemistry. The study was motivated by the simplicity, speed and low power consumption characteristic of these methods. Systems costs are affordable because they allow achieving good control of microstructure, combined with high purity, controlled stoichiometric phases and allowing to obtain particles of nanometer size. The physical, chemical, morphological, structural and optical properties of the materials obtained were analyzed using different techniques for materials characterization. The powder pigments were tested in discoloration and degradation using a photoreactor through the solution of Remazol yellow dye gold (NNI), such as filtration, resulting in a separation of solution and the filter pigments available for further UV-Vis measurements . Different calcination temperatures taken after obtaining the post, the different methods were: 400 º C and 1000 º C. Using a fixed concentration of 10% (Fe, Al, Ni, Co) mass relative to the mass of titanium technologically and economically enabling the study. By transmission electron microscopy (TEM) technique was possible to analyze and confirm the structural formation nanosized particles of encapsulated pigment, TiO2 having the diameter of 20 nm to 100 nm, and thickness of coated layer of Fe, Ni and Co between 2 nm and 10 nm. The method of synthesis more efficient has been studied in the work co-precipitation associated with sol-gel chemistry, in which the best results were achieved without the need for the obtainment of powders the calcination process

Comparação entre técnicas de nitretação em cátodo oco e gaiola catódica na deposição de TiN

The plasma nitriding has been used in industrial and technological applications for large-scale show an improvement in the mechanical, tribological, among others. In order to solve problems arising in the conventional nitriding, for example, rings constraint (edge effect) techniques have been developed with different cathodes. In this work, we studied surfaces of commercially pure titanium (Grade II), modified by plasma nitriding treatment through different settings cathodes (hollow cathode, cathodic cage with a cage and cathodic cage with two cages) varying the temperature 350, 400 and 430oC, with the goal of obtaining a surface optimization for technological applications, evaluating which treatment generally showed better results under the substrate. The samples were characterized by the techniques of testing for Atomic Force Microscopy (AFM), Raman spectroscopy, microhardness, X-ray diffraction (XRD), and a macroscopic analysis. Thus, we were able to evaluate the processing properties, such as roughness, topography, the presence of interstitial elements, hardness, homogeneity, uniformity and thickness of the nitrided layer. It was observed that all samples were exposed to nitriding modified relative to the control sample (no treatment) thus having increased surface hardness, the presence of TiN observed by XRD as per both Raman and a significant change in the roughness of the treated samples . It was found that treatment in hollow cathode, despite having the lowest value of microhardness between treated samples, was presented the lowest surface roughness, although this configuration samples suffer greater physical aggressiveness of treatment

Pressão de sono e perfil acadêmico de estudante de medicina do 1º período da UFRN

Academic demands, new social context, new routines and decrease of the parental control, are factors that may influence the sleep pattern of freshman students at the University. Medical students from the Federal University of Rio Grande do Norte (UFRN) have a full-time course, subjects with high-level content, and, at the first semester, classes begin at 7 a.m. This group composed by young adults who still suffering with delayed sleep phase, common in adolescence, indicating that this class schedule can be inappropriate at this age. The reduction of nocturnal sleep during school days, and the attempt to recover sleep on free days – social jet lag (JLS), suggests that in the first semester, students suffer from high sleep pressure. High sleep pressure may reflect on cognitive tasks and performance. Therefore, the aim of this study was to investigate the relationship between sleep pressure and the academic profile of medical students from the first semester of UFRN, characterizing this population socio-demographically and investigating possible impacts on therestactivity rhytm and academic performance. A sample of 88 students, healthy men and women awswered the following questionnaires: Pittsburgh Sleep Quality (PSQI), Epworth Sleepiness Scale (ESS), Horne & Ostberg Chronotype (HO), Munich Chronotype (MCTQ) and “Health and Sleep” adapted. Actigraphy was used during 14 days to make actogramas and obtain non-parametric variables of the rest-activity rhythm and the grades of the morning schedule were used as academic performance. The JLS was used as a measure of sleep pressure. Statistics significance level was 95%. The population was sociodemographic homogeneous. Most students have healthy lifestyle, practice physical activity, use car to go to the university and take between 15 and 30 minutes for this route. Regarding CSV, most were classify as intermediate (38.6%) and evening (32%) chronotypes, needs to nap during the week, suffer daytime sleepiness and have poor sleep quality. 83% of the sample has at least 1h JLS, which led us to divide into two groups: Group <2h JLS (N = 44) and Group ≥ 2h JLS (N = 44). The groups have differences only in chronotype, showing that most evening individuals have more JLS, however, no differences were found in relation to sociodemographic aspect, rest-activity rhythm or academic performance. The homogeneity of the sample was limited to compare the groups, however, is alarming that students already present in the first half: JLG, poor sleep quality and excessive daytime sleepiness, which can be accentuated through the university years, with the emergence of night shifts and increased academic demand. Interventionsaddressingthe importance of good sleep habits and the change of the class start time are strategies aimed to improve student’s health.

Efeito agudo do exercício físico associado a praxias ideomotoras sobre as concentrações séricas de cortisol e memória declarativa em indivíduos com idade entre 51 e 74 anos

Introduction: Several modifications are identified as aging, causing more or less limitation imposed by over the years. Among these, one can highlight the different degrees of cognitive decline, particularly memory that can involve the daily activities and the subject functionality. Studies have shown an association between levels of serum cortisol and stress imposed by the exercise on this. However, there are few studies that references the performance on cognitive aspects of declarative memory and cortisol on the exercise in the water with automatic and práxicos movements and moderate. Objective: Check the effect based on the acute physical exercise and práxicos automatic movements on the performance of visual declarative memory and in serum cortisol in subjects aged between 51 and 74 years. Materials and Methods: It builds a survey characterized as cross with a first sample of 32 physically active subjects aged between 51 and 74 years, divided into two exercise groups (March of Automatic Group - MAG and the March of Praxis Group - MPG). We used a probabilistic and random sampling for sample selection. Used the MMSE (Mini Mental State Examination) to check the general cognitive status, visual acuity test - optotypes chart "E" Rasquin and was even used the declarative visual memory test proposed by Nitrini and collaborators (1994), applying before motor stimulation and immediately after, and the day of blood collection with 2 ml for analysis of cortisol hormone. The normality and homogeneity were verified from the Shapiro-Wilk and Levene tests. Thus we adopted a descriptive statistics to characterize the sample. The Split-Plot ANOVA was used along with the paired t-test to verify the identified differences. We adopted a significance level of p <0.05. Results: It was observed that the groups (MAG and MPG) and the anthropometric variables, perceived exertion, education, cognitive assessment and visual acuity showed no significant differences (p > 0.05), showing that the groups are homogeneous, with variables and similar means. After the stimulation session, lasting 30 min, it was observed that the amount of hits for Δ of declarative memory questionnaire visual images increased, presenting significant for both groups (MAG, p < 0.001; MPG, p = 0.042). The same was observed for cortisol concentration with a reduction in the levels immediately after the stimulus (MAG and MPG, p < 0.001). Conclusion: The results showed that the exercises proposed in its acute effect provide significantly memories of gains and also showed a reduction in cortisol levels.

Análise de tendência e caracterização sazonal e interanual da evapotranspiração de referência para o sudoeste da amazônia brasileira: Acre, Brasil

The objective of this research was to investigate monthly climatological, seasonal, annual and interdecadal of the reference evapotranspiration (ETo) in Acre state in order to better understand its spatial and temporal variability and identify possible trends in the region. The study was conducted with data from Rio Branco municipalities, the state capital, Tarauacá and Cruzeiro do Sul considering a 30-year period (1985-2014), from monthly data from weather stations surface of the National Institute of Meteorology. The methodology was held, first, the consistency of meteorological data. Thus, it was made the gap filling in the time series by means of multivariate techniques. Subsequently were performed statistical tests trend (Mann-Kendall) and homogeneity, by Sen's estimator of the magnitude of this trend is estimated, as well as computational algorithms containing parametric and non-parametric tests for two samples to identify from that year the trend has become significant. Finally, analysis of variance technique (ANOVA) was adopted in order to verify whether there were significant differences in average annual evapotranspiration between locations. The indirect method of Penman-Montheith parameterized by FAO was used to calculate the ETo. The results of this work through examination of the descriptive statistics showed that the ETo the annual average was 3.80, 2.92 and 2.86 mm day-1 year, to Rio Branco, Tarauacá and Cruzeiro do Sul, respectively. Featuring quite remarkable seasonal pattern with a minimum in June and a maximum in October, with Rio Branco to town one with the strongest signal (amplitudes) on the other hand, the Southern Cross presented the highest variability among the studied locations. By ANOVA it was found that the average annual statistically different for a significance level of 1% between locations, but the annual average between Cruzeiro do Sul and Tarauacá no statistically significant differences. For the three locations, the 2000s was the one with the highest ETo values associated with warmer waters of the North Atlantic basin and the 80s to lower values, associated with cooler waters of this basin. By analyzing the Mann-kendall and Sen estimator test, there was a trend of increasing the seasonal reference evapotranspiration (fall, winter and spring) on the order of 0.11 mm per decade and that from the years of 1990, 1996 and 2001 became statistically significant to the localities of Cruzeiro do Sul Tarauacá and Rio Branco, respectively. For trend analysis of meteorological parameters was observed positive trend in the 5% level of significance, for average temperature, minimum temperature and solar radiation.

Análise de métodos para detecção de mudanças estruturais em séries temporais climáticas

The time series analysis has played an increasingly important role in weather and climate studies. The success of these studies depends crucially on the knowledge of the quality of climate data such as, for instance, air temperature and rainfall data. For this reason, one of the main challenges for the researchers in this field is to obtain homogeneous series. A time series of climate data is considered homogeneous when the values of the observed data can change only due to climatic factors, i.e., without any interference from external non-climatic factors. Such non-climatic factors may produce undesirable effects in the time series, as unrealistic homogeneity breaks, trends and jumps. In the present work it was investigated climatic time series for the city of Natal, RN, namely air temperature and rainfall time series, for the period spanning from 1961 to 2012. The main purpose was to carry out an analysis in order to check the occurrence of homogeneity breaks or trends in the series under investigation. To this purpose, it was applied some basic statistical procedures, such as normality and independence tests. The occurrence of trends was investigated by linear regression analysis, as well as by the Spearman and Mann-Kendall tests. The homogeneity was investigated by the SNHT, as well as by the Easterling-Peterson and Mann-Whitney-Pettit tests. Analyzes with respect to normality showed divergence in their results. The von Neumann ratio test showed that in the case of the air temperature series the data are not independent and identically distributed (iid), whereas for the rainfall series the data are iid. According to the applied testings, both series display trends. The mean air temperature series displays an increasing trend, whereas the rainfall series shows an decreasing trend. Finally, the homogeneity tests revealed that all series under investigations present inhomogeneities, although they breaks depend on the applied test. In summary, the results showed that the chosen techniques may be applied in order to verify how well the studied time series are characterized. Therefore, these results should be used as a guide for further investigations about the statistical climatology of Natal or even of any other place.

Estimativas, variabilidade e análise de tendência da evapotranspiração de referência em perímetros irrigados, no semiárido do nordeste brasileiro

The variability / climate change has generated great concern worldwide, is one of the major issues as global warming, which can is affecting the availability of water resources in irrigated perimeters. In the semiarid region of Northeastern Brazil it is known that there is a predominance of drought, but it is not enough known about trends in climate series of joint water loss by evaporation and transpiration (evapotranspiration). Therefore, this study aimed to analyze whether there is increase and / or decrease evidence in the regime of reference evapotranspiration (ETo), for the monthly, annual and interdecadal scales in irrigated polo towns of Juazeiro, BA (9 ° 24'S, 40 ° 26'W and 375,5m) and Petrolina, PE (09 ° 09'S, 40 ° 22'W and 376m), which is the main analysis objective. The daily meteorological data were provided by EMBRAPA Semiárido for the period from 01.01.1976 to 31.12.2014, estimated the daily ETo using the standard method of Penman-Monteith (EToPM) parameterized by Smith (1991). Other methods of more simplified estimatives were calculated and compared to EToPM, as the ones following: Solar Radiation (EToRS), Linacre (EToL), Hargreaves and Samani (EToHS) and the method of Class A pan (EToTCA). The main statistical analysis were non-parametric tests of homogeneity (Run), trend (Mann-kendall), magnitude of the trend (Sen) and early trend detection (Mann-Whitney). The statistical significance adopted was 5 and / or 1%. The Analysis of Variance - ANOVA was used to detect if there is a significant difference in mean interdecadal mean. For comparison between the methods of ETo, it were used the correlation test (r), the Student t test and Tukey levels of 5% significance. Finally, statistics Willmott et al. (1985) statistics was used to evaluate the concordance index and performance of simplified methods compared to the standard method. It obtained as main results that there was a decrease in the time series of EToPM in irrigated areas of Juazeiro, BA and Petrolina, PE, significant respectively at 1 and 5%, with an annual magnitude of -14.5 mm (Juazeiro) and -7.7 mm (Petrolina) and early trend in 1996. The methods which had better for better agreement with EToPM were EToRS with very good performance, in both locations, followed by the method of EToL with good performance (Juazeiro) and median (Petrolina). EToHS had the worst performance (bad) for both locations. It is suggested that this decrease of EToPM can be associated with the increase in irrigated agricultural areas and the construction of Sobradinho lake upstream of the perimeters.

Efeito tardio do kinesio taping na função do membro inferior e no desempenho neuromuscular do quadríceps femoral de mulheres saudáveis: ensaio clínico e randomizado

Introduction: Kinesio Taping (KT) has been used in healthy people to improve neuromuscular performance, however, few studies have evaluated its chronic effects, despite being suggested. Objective: To analyze the chronic effects of KT on neuromuscular performance of the quadriceps, the oscillation of the center of pressure and lower limb function in healthy women. Methods: blinded, randomized, controlled trial, composed of 60 women (mean age 21.9 ± 3.3 years and BMI 22.3 ± 2.2 kg / m2) submitted to the evaluation of oscillation of the center of pressure through the baropodometry, the lower limb function by the hop test, isokinetic knee performance, the electromyographic activity of the vastus lateralis (VL) and joint position sense of the knee (JPS). Then, participants were randomly divided into three groups of twenty: control - did not apply the KT; placebo - application of KT without tension on the quadriceps; Kinesio Taping - application of KT with tension in the same muscle group. The evaluations were conducted in five moments: prior to application of KT, immediately after the application, 24h, 48h after application and 24 hours after its removal (72h). SPSS 20.0 was used for statistical analysis. The KS test was used to verify the data normality, the Levene test for homogeneity of variances and a mixed-model ANOVA 3x5 to check intra and inter-group differences. Results: there was no difference in peak torque, the power, nor the electromyographic activity or SPA (p> 0.05) between groups. The displacement speed of center of pressure reduced immediately after the application on kinesio taping group (p <0.001), but with no differences between the groups (p = 0.28). There was a reduction in the time of peak torque among the three groups in the evaluations after KT application (p <0.001) and an increase in single hop in all groups (p <0.001), but with no differences between them. Conclusion: KT can not change, in a chronic way, the lower limb function, the oscillation of the center of pressure, the isokinetic performance, the JPS of the knee and the electromyographic activity of VL muscle in healthy women.

Obtenção e caracterização de um compósito de matriz polimérica com carga de resíduos vegetal proveniente do sabugo de milho

The feasibility of using the corn cob to obtain a polymer matrix composite was studied. To obtain the bran, corncob passed the drying process in a solar dryer, and was subsequently triturated in forage and to obtain the different particle sizes, by sieving. Three different grain sizes were used: fine particles (FP) size between 0,10 and 2mm; sized particles (PM) with sizes between 2,10 and 3,35 mm; large particles (PG) sizes between 3,45 and 4,10 mm. Using 20% of residue relative to the resin, the test samples were constructed for characterization of the composite, taking into account thermal and mechanical parameters. The main advantage of the proposed composite is that it has a low density, below the relative resin, about 1.06 kg / m³ for the PG. The composite showed a mechanical behavior less than of the resin to the grain sizes and for all formulations studied. Showed better results for the bending, reaching 25.3 MPa for the PG. The composite also showed be feasible for thermal applications, with thermal conductivity less than 0.21 W / m, ranking as insulation. In terms of homogeneity of the mixture, the most viable grain size is the PF, which also showed improved aesthetics and better processability. This composite can be used to make structures that do not require significant mechanical strength, such as tables, chairs, planks, and solar and wind prototypes, such as ovens and cookers and turbines blades.

Obtenção e caracterização de um compósito de matriz polimérica com carga de resíduos vegetal proveniente do sabugo de milho

The feasibility of using the corn cob to obtain a polymer matrix composite was studied. To obtain the bran, corncob passed the drying process in a solar dryer, and was subsequently triturated in forage and to obtain the different particle sizes, by sieving. Three different grain sizes were used: fine particles (FP) size between 0,10 and 2mm; sized particles (PM) with sizes between 2,10 and 3,35 mm; large particles (PG) sizes between 3,45 and 4,10 mm. Using 20% of residue relative to the resin, the test samples were constructed for characterization of the composite, taking into account thermal and mechanical parameters. The main advantage of the proposed composite is that it has a low density, below the relative resin, about 1.06 kg / m³ for the PG. The composite showed a mechanical behavior less than of the resin to the grain sizes and for all formulations studied. Showed better results for the bending, reaching 25.3 MPa for the PG. The composite also showed be feasible for thermal applications, with thermal conductivity less than 0.21 W / m, ranking as insulation. In terms of homogeneity of the mixture, the most viable grain size is the PF, which also showed improved aesthetics and better processability. This composite can be used to make structures that do not require significant mechanical strength, such as tables, chairs, planks, and solar and wind prototypes, such as ovens and cookers and turbines blades.

Foraminíferos, ostracodes e microfauna associada da plataforma continental equatorial norte-rio-grandense, NE Brasil: área Porto do Mangue a Galinhos

This study was conducted in the adjacent Brazilian equatorial inner shelf to Rio Grande do Norte, between the region of Porto do Mangue and Galinhos. The main objective is the characterization of biogenic sediments, especially foraminifera and ostracod collected on the surface of the seafloor. The methodology involved standard procedures including literature, surveys, processing of samples in the laboratory and identification of foraminifera and ostracods by genera or species under stereo microscopy and scanning electron microscopy (SEM). Multivariate statistical analyzes and study of ecological indexes were also applied to the study of foraminifera. Three transects, from inner shelf to slope were sampled: profile 01 (east, near Galos), profile 02 (center, near the city of Macau) and profile 03 (west, near Ponta do Mel). Results indicated the predominance of benthic foraminifera and little plankton occurrence. Benthic foraminifera genera observed in abundance were Quinqueloculina, Textularia, Globigerina and Pyrgo, Quinqueloculina, Textularia, Pyrgo, Ammonia, Elphidium, Pseudononion, Peneroplis, Bolivina and Poroeponides, occurred more frequently. Less frequently been described Amphistegina, Archaias, Bigenerina, Cibicides, Cassidulina, Amphicorina, Cornuspira, Paterina, Hopkunsina, Oolina, Uvigerina, Fusenkoina, Nonionella, Amphisorus, Wiesrella, Reussella, Reophax, Nodosaria, Marginulina and Cyclogyra. Six genera of ostracods were also identified: Puriana variabilis / P. convoluted?, Loxoconcha sp, Bairdiidae, Xestoleberis sp, Hemicytheridae and Ruggiericythere sp. Groups of organisms found in the studied shelf presented chemical composition of Ca, C, O, Na, Cl, Al, Mg, and Si. The proportions of chemical elements may vary according to the type of biogenic sediment, with the highest values identified as Ca, C, Cl, Na and O. The absolute dating by carbon 14 method indicated sediments of different colors (light and dark), correspond to a single age from 3000 to 6000 years BP, related to the Quaternary. These data intend to complement information about biogenic sediments in the Brazilian continental shelf, especially in the Northeast, where there is a lack of such studies.

Foraminíferos, ostracodes e microfauna associada da plataforma continental equatorial norte-rio-grandense, NE Brasil: área Porto do Mangue a Galinhos

This study was conducted in the adjacent Brazilian equatorial inner shelf to Rio Grande do Norte, between the region of Porto do Mangue and Galinhos. The main objective is the characterization of biogenic sediments, especially foraminifera and ostracod collected on the surface of the seafloor. The methodology involved standard procedures including literature, surveys, processing of samples in the laboratory and identification of foraminifera and ostracods by genera or species under stereo microscopy and scanning electron microscopy (SEM). Multivariate statistical analyzes and study of ecological indexes were also applied to the study of foraminifera. Three transects, from inner shelf to slope were sampled: profile 01 (east, near Galos), profile 02 (center, near the city of Macau) and profile 03 (west, near Ponta do Mel). Results indicated the predominance of benthic foraminifera and little plankton occurrence. Benthic foraminifera genera observed in abundance were Quinqueloculina, Textularia, Globigerina and Pyrgo, Quinqueloculina, Textularia, Pyrgo, Ammonia, Elphidium, Pseudononion, Peneroplis, Bolivina and Poroeponides, occurred more frequently. Less frequently been described Amphistegina, Archaias, Bigenerina, Cibicides, Cassidulina, Amphicorina, Cornuspira, Paterina, Hopkunsina, Oolina, Uvigerina, Fusenkoina, Nonionella, Amphisorus, Wiesrella, Reussella, Reophax, Nodosaria, Marginulina and Cyclogyra. Six genera of ostracods were also identified: Puriana variabilis / P. convoluted?, Loxoconcha sp, Bairdiidae, Xestoleberis sp, Hemicytheridae and Ruggiericythere sp. Groups of organisms found in the studied shelf presented chemical composition of Ca, C, O, Na, Cl, Al, Mg, and Si. The proportions of chemical elements may vary according to the type of biogenic sediment, with the highest values identified as Ca, C, Cl, Na and O. The absolute dating by carbon 14 method indicated sediments of different colors (light and dark), correspond to a single age from 3000 to 6000 years BP, related to the Quaternary. These data intend to complement information about biogenic sediments in the Brazilian continental shelf, especially in the Northeast, where there is a lack of such studies.