Global engineering education: Australia and the Bologna process

This paper presents a critical comparison of major changes in engineering education in both Australia and Europe. European engineering programs are currently being reshaped by the Bologna process, representing a move towards quality assurance in higher education and the mutual recognition of degrees among universities across Europe. Engineering education in Australia underwent a transformation after the 1996 review of engineering education1. The paper discusses the recent European developments in order to give up-to-date information on this fast changing and sometimes obscure process. The comparison draws on the implications of the Bologna Process on the German engineering education system as an example. It concludes with issues of particular interest, which can help to inform the international discussion on how to meet today’s challenges for engineering education. These issues include ways of achieving diversityamong engineering programs, means of enabling student and staff mobility, and the preparation of engineering students for professional practic e through engineering education. As a result, the benefits of outcomes based approaches in education are discussed. This leads to an outlook for further research into the broader attributes required by future professional engineers. © 2005, Australasian Association for Engineering Education

Applying a Systems Approach to the Analysis of the Benefits of Conversion to Organic Production

Although the current level of organic production in industrialised countries amounts to little more than 1-2 percent, it is recognised that one of the major issues shaping agricultural output over the next several decades will be the demand for organic produce (Dixon et al. 2001). In Australia, the issues of healthy food and environmental concern contribute to increasing demand and market volumes for organic produce. However, in Indonesia, using more economical inputs for organic production is a supply-side factor driving organic production. For individual growers and processors, conversion from conventional to organic agriculture is often a challenging step, entailing a thorough revision of established practices and heightened market insecurity. This paper examines the potential for a systems approach to the analysis of the conversion process, to yield insights for household and community decisions. A framework for applying farming systems research to investigate the benefits of organic production in both Australia and Indonesia is discussed. The framework incorporates scope for farmer participation, crucial to the understanding of farming systems; analysis of production; and relationships to resources, technologies, markets, services, policies and institutions in their local cultural context. A systems approach offers the potential to internalise the external effects that may be constraining decisions to convert to organic production, and for the design of decision-making tools to assist households and the community. Systems models can guide policy design and serve as a mechanism for predicting the impact of changes to the policy and market environments. The increasing emphasis of farming systems research on community and environment in recent years is in keeping with the proposed application to organic production, processing and marketing issues. The approach will also facilitate the analysis of critical aspects of the Australian production, marketing and policy environment, and the investigation of these same features in an Indonesian context.

Evolutionary neurobiology and art

In his important book on evolutionary theory, Darwin's Dangerous Idea, Daniel Dennett warns that Darwin's idea seeps through every area of human discourse like a "universal acid" (Dennett, 1995). Art and the aesthetic response cannot escape its influence. So my approach in this chapter is essentially naturalistic. Friedrich Nietzsche writes of observing the human comedy from afar, "like a cold angel...without anger, but without warmth" (Nietzsche, 1872, p. 164). Whether Nietzsche, of all people, could have done this is a matter of debate. But we know what he means. It describes a stance outside the human world as if looking down on human folly from Mount Olympus. From this stance, humans, their art and neurology are all part of the natural world, all part of the evolutionary process, the struggle for existence. The anthropologist David Dutton, in his contribution to the Routledge Companion to Aesthetics, says that all humans have an aesthetic sense (Dutton, 2001). It is a human universal. Biologists argue that such universals have an evolutionary basis. Furthermore, many have argued that not only humans but also animals, at least the higher mammals and birds, have an appreciation of the beautiful and the ugly (Eibl-Eibesfeldt, 1988).11Charles Darwin indeed writes "Birds appear to be the most aesthetic of all animals, excepting, of course, man, and they have nearly the same sense of the beautiful that we have" (1871, The Descent of Man and Selection in Relation to Sex, London: John Murray, vol.2, xiii, 39). This again suggests that aesthetics has an evolutionary origin. In parenthesis here, I should perhaps say that I am well aware of the criticism leveled at evolutionary psychology. I am well aware that it has been attacked as just so many "just-so" stories. This is neither the time nor the place to mount a defense but simply just to say that I believe that a defense is eminently feasible. © 2006 Elsevier Inc. All rights reserved.

Regulation - the movie:a semiotic study of the periodic review of UK regulated industry

This paper explores the regulatory process of UK privatised utilities as manifest in the periodic review of prices. Two separate review processes are identified, operating concurrently - a covert dialogue between the regulator and the regulated and an overt dialogue taking place in the public arena. Using a semiotic analysis of the review the authors argue that the overt event is the real review. Furthermore they argue that the unfolding of each review is so similar that it can be likened to a film script which is constantly re-enacted. The purpose of the review as a legitimating vehicle for the regulator and regulated, who exist in a symbiotic relationship, is explored in terms of the semiotics involved and the myth creation role of legitimation in order to explain the significance of the regulatory process.

Organizing the innovation process:complementarities in innovation networking

This paper contributes to the developing literature on complementarities in organizational design. We test for the existence of complementarities in the use of external networking between stages of the innovation process in a sample of UK and German manufacturing plants. Our evidence suggests some differences between the UK and Germany in terms of the optimal combination of innovation activities in which to implement external networking. Broadly, there is more evidence of complementarities in the case of Germany, with the exception of the product engineering stage. By contrast, the UK exhibits generally strong evidence of substitutability in external networking in different stages, except between the identification of new products and product design and development stages. These findings suggest that previous studies indicating strong complementarity between internal and external knowledge sources have provided only part of the picture of the strategic dilemmas facing firms.

Organising the innovation process:complementarities in innovation networking

This paper contributes to the developing literature on complementarities in organisational design. We test for the existence of complementarities in the use of external networking between phases of the innovation process in a sample of UK and German manufacturing plants. Our evidence suggests some differences between the UK and Germany in terms of the optimal combination of innovation activities in which to implement external networking. Broadly, there is more evidence of complementarities in the case of Germany, with the exception of the product engineering phase. By contrast, the UK exhibits generally strong evidence of substitutability in external networking in different phases, except between the identification of new products and product design and development phases.

Multiphase modelling of the characteristics of close coupled gas atomization

Not withstanding the high demand of metal powder for automotive and High Tech applications, there are still many unclear aspects of the production process. Only recentlyhas supercomputer performance made possible numerical investigation of such phenomena. This thesis focuses on the modelling aspects of primary and secondary atomization. Initially two-dimensional analysis is carried out to investigate the influence of flow parameters (reservoir pressure and gas temperature principally) and nozzle geometry on final powder yielding. Among the different types, close coupled atomizers have the best performance in terms of cost and narrow size distribution. An isentropic contoured nozzle is introduced to minimize the gas flow losses through shock cells: the results demonstrate that it outperformed the standard converging-diverging slit nozzle. Furthermore the utilization of hot gas gave a promising outcome: the powder size distribution is narrowed and the gas consumption reduced. In the second part of the thesis, the interaction of liquid metal and high speed gas near the feeding tube exit was studied. Both axisymmetric andnon-axisymmetric geometries were simulated using a 3D approach. The filming mechanism was detected only for very small metal flow rates (typically obtained in laboratory scale atomizers). When the melt flow increased, the liquid core overtook the adverse gas flow and entered in the high speed wake directly: in this case the disruption isdriven by sinusoidal surface waves. The process is characterized by fluctuating values of liquid volumes entering the domain that are monitored only as a time average rate: it is far from industrial robustness and capability concept. The non-axisymmetric geometry promoted the splitting of the initial stream into four cores, smaller in diameter and easier to atomize. Finally a new atomization design based on the lesson learned from previous cases simulation is presented.

The evaluation of information systems in the organisational context of the National Health Service. Available in 2 volumes.

This thesis describes a project which has investigated the evaluation of information systems. The work took place in, and is related to, a specific organisational context, that of the National Health Service (NHS). It aims to increase understanding of the evaluation which takes place in the service and the way in which this is affected by the NHS environment. It also investigates the issues which surround some important types of evaluation and their use in this context. The first stage of the project was a postal survey in which respondents were asked to describe the evaluation which took place in their authorities and to give their opinions about it. This was used to give an overview of the practice of IS evaluation in the NHS and to identify its uses and the problems experienced. Three important types of evaluation were then examined in more detail by means of action research studies. One of these dealt with the selection and purchase of a large hospital information system. The study took the form of an evaluation of the procurement process, and examined the methods used and the influence of organisational factors. The other studies are concerned with post-implementation evaluation, and examine the choice of an evaluation approach as well as its application. One was an evaluation of a community health system which had been operational for some time but was of doubtful value, and suffered from a number of problems. The situation was explored by means of a study of the costs and benefits of the system. The remaining study was the initial review of a system which was used in the administration of a Breast Screening Service. The service itself was also newly operational and the relationship between the service and the system was of interest.

Negotiating regional futures:the successes and failures of the West Midlands Regional Development Agency Network

The introduction of Regional Development Agencies (RDAs) in the English regions in 1999 presented a new set of collaborative challenges to existing local institutions. The key objectives of the new policy impetus emphasise increased joined-up thinking and holistic regional governance. Partners were enjoined to promote cross-sector collaboration and present a coherent regional voice. This study aims to evaluate the impact of an RDA on the partnership infrastructure of the West Midlands. The RDA network incorporates a wide spectrum of interest and organisations with diverse collaborative histories, competencies and capacities. The study has followed partners through the process over an eighteen-month period and has sought to explore the complexities and tensions of partnership working 'on the ground'. A strong qualitative methodology has been employed in generating 'thick descriptions' of the policy domain. The research has probed beyond the 'rhetoric' of partnerships and explores the sensitivities of the collaboration process. A number of theoretical frameworks have been employed, including policy network theory; partnership and collaboration theory; organisational learning; and trust and social capital. The structural components of the West Midlands RDA network are explored, including the structural configuration of the network and stocks of human and social capital assets. These combine to form the asset base of the network. Three sets of network behaviours are then explored, namely, strategy, the management of perceptions, and learning. The thesis explores how the combination of assets and behaviours affect, and in turn are affected by, each other. The findings contribute to the growing body of knowledge and understanding surrounding policy networks and collaborative governance.

A study in Britain and France of the development of cross-cultural in-house sales training using distance learning.

The thesis is concerned with cross-cultural distance learning in two countries: Great Britain and France. Taking the example of in-house sales training, it argues that it is possible to develop courses for use in two or more countries of differing culture and language. Two courses were developed by the researcher. Both were essentially print-based distance-learning courses designed to help salespeople achieve a better understanding of their customers. One used a quantitative, the other qualitative approach. One considered the concept of the return on investment and the other, for which a video support was also developed, considered the analysis of a customer's needs. Part 1 of the thesis considers differences in the training context between France and Britain followed by a review of the learning process with reference to distance learning. Part 2 looks at the choice of training medium course design and evaluation and sets out the methodology adopted, including problems encountered in this type of fieldwork. Part 3 analyses the data and draws conclusions from the findings, before offering a series of guidelines for those concerned with the development of cross-cultural in-house training courses. The results of the field tests on the two courses were analysed in relation to the socio-cultural, educational and experiential background of the learners as well as their preferred learning styles. The thesis argues that it is possible to develop effective in-house sales training courses to be used in two cultures and identifies key considerations which need to be taken into account when carrying out this type of work.

Seminars and examinations:students' perceptions of the seminar in their examination revision strategy

Students’ performance in examinations is often weaker than in other forms of assessment. Yet it should not be assumed that examination technique is innate or skill based. Successful examination performance calls on students to synthesize information and to demonstrate academic competence. Successful academic performance is primarily concerned with articulatory principles of subject formation and appropriation. However, research into seminars, lectures and examination performances mostly seek to establish a relationship between ‘performance’ and ‘potential’, with much attention focused discretely upon either organizational considerations or the reluctant learner. By emphasizing the social construction of learning situations, this project locates the learning process within a notion of collective social experiences and mutual cooperation. In the broader sense it is interested in questions of meaning and understanding and the process by which concepts are constructed and understood. This process depends on ‘ritualization’, ‘participation frameworks’ and ‘embedding’ (Goffman, 1981). Some students experience difficulties in participating in the ritualized behaviour, which may affect their academic development. By seeking to investigate students’ perception of how they use seminars to develop their academic expertise, this project seeks to contribute to our understanding of the learning process, in particular, the relationship between students’ participation in the examination process and assessment strategies.

Servitization of the manufacturing firm:exploring the operations practices and technologies that deliver advanced services

Purpose: This paper aims to explore practices and technologies successfully servitised manufacturers employ in the delivery of advanced services. Design/methodology/approach: A case study methodology is applied across four manufacturing organisations successful in servitization. Through interviews with personnel across host manufacturers, their partners, and key customers, extensive data are collected about service delivery systems. Analyses identify convergence in their practices and technologies. Findings: Six distinct technologies and practices are revealed: facilities and their location, micro-vertical integration and supplier relationships, information and communication technologies (ICTs), performance measurement and value demonstration, people deployment and their skills, and business processes and customer relationships. These are then combined in an integrative framework that illustrates how operations are configured to successfully deliver advanced services. Research limitations/implications: The analyses are reductive and rationalising. Future studies could identify other technologies and practices. Case study as a method is inherently limited in the extent to which findings can be generalised. Practical implications: Awareness and interest in servitization is growing, yet adoption of a servitization strategy requires particular organisational capabilities on the part of the manufacturer. This study identifies technologies and practices that underpin these capabilities. Originality/value: This paper contributes to the understanding of the servitization process and, in particular, the implications to broader operations of the firm. © Emerald Group Publishing Limited.

Breakup of a multisoliton state of the linearly damped nonlinear Schrödinger equation

We address the breakup (splitting) of multisoliton solutions of the nonlinear Schrödinger equation (NLSE), occurring due to linear loss. Two different approaches are used for the study of the splitting process. The first one is based on the direct numerical solution of the linearly damped NLSE and the subsequent analysis of the eigenvalue drift for the associated Zakharov-Shabat spectral problem. The second one involves the multisoliton adiabatic perturbation theory applied for studying the evolution of the solution parameters, with the linear loss taken as a small perturbation. We demonstrate that in the case of strong nonadiabatic loss the evolution of the Zakharov-Shabat eigenvalues can be quite nontrivial. We also demonstrate that the multisoliton breakup can be correctly described within the framework of the adiabatic perturbation theory and can take place even due to small linear loss. Eventually we elucidate the occurrence of the splitting and its dependence on the phase mismatch between the solitons forming a two-soliton bound state. © 2007 The American Physical Society.

An examination of the determinants of entrepreneurship at the regional level:the case of East Midlands region

Despite the importance of new firms to the economy, determinants of start-ups have mainly been examined at a country level and discussion of regional entrepreneurial activity has received less attention. Since there are significant variations in entrepreneurship rates across and within countries, such an investigation at a regional level would help in gaining an in depth understanding of the impact of the individual level resource endowments and neighbourhood characteristics on an individual’s decision to engage in entrepreneurial activity. The main aim of the thesis is to explore various theories of entrepreneurship and develop integrated frameworks for examining the determinants of entrepreneurial activity at a neighbourhood level in the East Midlands region in England. The specific objectives of the thesis are to examine how the individual level resources and the neighbourhood characteristics: (i) combine to influence an individual to engage in the different stages of the entrepreneurial process, (ii) influence natives and migrants to engage in start up activity and (iii) influence women and men to become self-employed and ambitious entrepreneurs. In terms of the methodology, the empirical analysis is based on two databases combined: 2006 to 2009 GEM East Midlands region and the English Index of Multiple Deprivation dataset. Based on the critical review of the literature on entrepreneurship the thesis develop theoretical frameworks which led to formulate hypotheses related to the differentiated impact of both individual and neighbourhood level factors on the propensity of an individual to be involved in entrepreneurial activity. The findings indicate that the determinants of entrepreneurial activity vary with human, financial and the local environment factors affecting the entrepreneurial process. Finally, the thesis calls for caution when developing and applying generic and specific policy measures aimed at promoting entry into entrepreneurship.

Using the Business Process Execution Language for Managing Scientific Processes

This paper describes the use of the Business Process Execution Language for Web Services (BPEL4WS/BPEL) for managing scientific workflows. This work is result of our attempt to adopt Service Oriented Architecture in order to perform Web services – based simulation of metal vapor lasers. Scientific workflows can be more demanding in their requirements than business processes. In the context of addressing these requirements, the features of the BPEL4WS specification are discussed, which is widely regarded as the de-facto standard for orchestrating Web services for business workflows. A typical use case of calculation the electric field potential and intensity distributions is discussed as an example of building a BPEL process to perform distributed simulation constructed by loosely-coupled services.