Análisis del ruido de ocio, propuesta de procedimientos y herramientas de gestión

El ruido derivado de las actividades de ocio es uno de los contaminantes acústicos más importantes en la sociedad actual. Este foco de ruido no sólo se encuentra presente en los entorno de los bares, pubs o discotecas, sino también en las zonas donde se desarrollan los eventos festivos de la ciudad. Sin embargo, son pocos los estudios y actuaciones llevadas a cabo desde el punto de vista ambiental que permitan conocer las principales características del ruido de ocio, los métodos de medida o los parámetros más adecuados. Por este motivo, se han fijado en estos aspectos los objetivos de esta tesis doctoral. Para el estudio del ruido de ocio nocturno se ha desarrollado y evaluado un método de medida, basado en la realización de medidas binaurales durante un recorrido y en medidas de larga duración en puntos fijos de las distintas zonas de ocio de Madrid y Cuenca. A partir de los resultados obtenidos, se ha realizado una caracterización acústica del ruido ocio, se ha definido un procedimiento de actuación en el que se incluye un modelo de predicción, y se ha desarrollado un modelo clasificador capaz de diferenciar el ruido de ocio del ruido de tráfico rodado. En el caso de los eventos de ocio también se ha desarrollado un método de evaluación y medida adaptado a sus características, con el que se han medido los eventos más importantes acontecidos durante un año en Madrid y Cuenca, del análisis de estas medidas se ha determinado qué eventos son los más ruidosos, así como sus características principales y las diferencias entre ellos. Este estudio pretende servir de apoyo en la gestión del ruido ambiental derivado de las actividades de ocio, presentando datos cualitativos y cuantitativos de este tipo de ruido en sus distintas facetas y aportando nuevas herramientas que faciliten su gestión. ABSTRACT Leisure noise is one of the most important environmental pollutants nowadays. This noise is not only nearby leisure venues where people go at night, but also around leisure events like popular parties or concerts placed in urban areas. There are few studies and actions about leisure noise from the environmental noise point of view, and consequently, there are no information about the leisure noise characteristics, the most appropriate measurement methods or the most interesting parameters to evaluate this kind of noise. Consequently, these are the aims of this PhD thesis. About the noise around leisure venues, a measurement method has been defined by using the Soundwalker technique. Besides, fixed point measurements have been done in different leisure areas. With the results of these measurements, a noise characterization has been done and a guide has been developed to act in case of leisure noise problems, including a method to predict the leisure noise in this kind of areas. As well as that, a classifying model has been done to differenciate leisure noise and road traffic noise. A measurement procedure has been developed in the leisure events case. Following this procedure, the most important events happened during a year in two different cities have been measured. With these results, the noisiest events, the most important characteristics of each kind of event and the differences between them have been pointed out. This study tries to support the environmental noise management in the leisure noise case. It provides cualitative and quantitative data of leisure noise levels in different situations; it also defines an action protocol to resolve leisure noise problems and it defines new tools to manage this kind of noise.

Output Impedance Correction Circuit (OICC): A New Concept to Improve the Dynamic Response of DC/DC Converters with Additional Energy Path

El desarrollo da las nuevas tecnologías permite a los ingenieros llevar al límite el funcionamiento de los circuitos integrados (Integrated Circuits, IC). Las nuevas generaciones de procesadores, DSPs o FPGAs son capaces de procesar la información a una alta velocidad, con un alto consumo de energía, o esperar en modo de baja potencia con el mínimo consumo posible. Esta gran variación en el consumo de potencia y el corto tiempo necesario para cambiar de un nivel al otro, afecta a las especificaciones del Módulo de Regulador de Tensión (Voltage Regulated Module, VRM) que alimenta al IC. Además, las características adicionales obligatorias, tales como adaptación del nivel de tensión (Adaptive Voltage Positioning, AVP) y escalado dinámico de la tensión (Dynamic Voltage Scaling, DVS), imponen requisitos opuestas en el diseño de la etapa de potencia del VRM. Para poder soportar las altas variaciones de los escalones de carga, el condensador de filtro de salida del VRM se ha de sobredimensionar, penalizando la densidad de energía y el rendimiento durante la operación de DVS. Por tanto, las actuales tendencias de investigación se centran en mejorar la respuesta dinámica del VRM, mientras se reduce el tamaño del condensador de salida. La reducción del condensador de salida lleva a menor coste y una prolongación de la vida del sistema ya que se podría evitar el uso de condensadores voluminosos, normalmente implementados con condensadores OSCON. Una ventaja adicional es que reduciendo el condensador de salida, el DVS se puede realizar más rápido y con menor estrés de la etapa de potencia, ya que la cantidad de carga necesaria para cambiar la tensión de salida es menor. El comportamiento dinámico del sistema con un control lineal (Control Modo Tensión, VMC, o Control Corriente de Pico, Peak Current Mode Control, PCMC,…) está limitado por la frecuencia de conmutación del convertidor y por el tamaño del filtro de salida. La reducción del condensador de salida se puede lograr incrementando la frecuencia de conmutación, así como incrementando el ancho de banda del sistema, y/o aplicando controles avanzados no-lineales. Usando esos controles, las variables del estado se saturan para conseguir el nuevo régimen permanente en un tiempo mínimo, así como el filtro de salida, más específicamente la pendiente de la corriente de la bobina, define la respuesta de la tensión de salida. Por tanto, reduciendo la inductancia de la bobina de salida, la corriente de bobina llega más rápido al nuevo régimen permanente, por lo que una menor cantidad de carga es tomada del condensador de salida durante el tránsito. El inconveniente de esa propuesta es que el rendimiento del sistema es penalizado debido al incremento de pérdidas de conmutación y las corrientes RMS. Para conseguir tanto la reducción del condensador de salida como el alto rendimiento del sistema, mientras se satisfacen las estrictas especificaciones dinámicas, un convertidor multifase es adoptado como estándar para aplicaciones VRM. Para asegurar el reparto de las corrientes entre fases, el convertidor multifase se suele implementar con control de modo de corriente. Para superar la limitación impuesta por el filtro de salida, la segunda posibilidad para reducir el condensador de salida es aplicar alguna modificación topológica (Topologic modifications) de la etapa básica de potencia para incrementar la pendiente de la corriente de bobina y así reducir la duración de tránsito. Como el transitorio se ha reducido, una menor cantidad de carga es tomada del condensador de salida bajo el mismo escalón de la corriente de salida, con lo cual, el condensador de salida se puede reducir para lograr la misma desviación de la tensión de salida. La tercera posibilidad para reducir el condensador de salida del convertidor es introducir un camino auxiliar de energía (additional energy path, AEP) para compensar el desequilibrio de la carga del condensador de salida reduciendo consecuentemente la duración del transitorio y la desviación de la tensión de salida. De esta manera, durante el régimen permanente, el sistema tiene un alto rendimiento debido a que el convertidor principal con bajo ancho de banda es diseñado para trabajar con una frecuencia de conmutación moderada para conseguir requisitos estáticos. Por otro lado, el comportamiento dinámico durante los transitorios es determinado por el AEP con un alto ancho de banda. El AEP puede ser implementado como un camino resistivo, como regulador lineal (Linear regulator, LR) o como un convertidor conmutado. Las dos primeras implementaciones proveen un mayor ancho de banda, acosta del incremento de pérdidas durante el transitorio. Por otro lado, la implementación del convertidor computado presenta menor ancho de banda, limitado por la frecuencia de conmutación, aunque produce menores pérdidas comparado con las dos anteriores implementaciones. Dependiendo de la aplicación, la implementación y la estrategia de control del sistema, hay una variedad de soluciones propuestas en el Estado del Arte (State-of-the-Art, SoA), teniendo diferentes propiedades donde una solución ofrece más ventajas que las otras, pero también unas desventajas. En general, un sistema con AEP ideal debería tener las siguientes propiedades: 1. El impacto del AEP a las pérdidas del sistema debería ser mínimo. A lo largo de la operación, el AEP genera pérdidas adicionales, con lo cual, en el caso ideal, el AEP debería trabajar por un pequeño intervalo de tiempo, solo durante los tránsitos; la otra opción es tener el AEP constantemente activo pero, por la compensación del rizado de la corriente de bobina, se generan pérdidas innecesarias. 2. El AEP debería ser activado inmediatamente para minimizar la desviación de la tensión de salida. Para conseguir una activación casi instantánea, el sistema puede ser informado por la carga antes del escalón o el sistema puede observar la corriente del condensador de salida, debido a que es la primera variable del estado que actúa a la perturbación de la corriente de salida. De esa manera, el AEP es activado con casi cero error de la tensión de salida, logrando una menor desviación de la tensión de salida. 3. El AEP debería ser desactivado una vez que el nuevo régimen permanente es detectado para evitar los transitorios adicionales de establecimiento. La mayoría de las soluciones de SoA estiman la duración del transitorio, que puede provocar un transitorio adicional si la estimación no se ha hecho correctamente (por ejemplo, si la corriente de bobina del convertidor principal tiene un nivel superior o inferior al necesitado, el regulador lento del convertidor principal tiene que compensar esa diferencia una vez que el AEP es desactivado). Otras soluciones de SoA observan las variables de estado, asegurando que el sistema llegue al nuevo régimen permanente, o pueden ser informadas por la carga. 4. Durante el transitorio, como mínimo un subsistema, o bien el convertidor principal o el AEP, debería operar en el lazo cerrado. Implementando un sistema en el lazo cerrado, preferiblemente el subsistema AEP por su ancho de banda elevado, se incrementa la robustez del sistema a los parásitos. Además, el AEP puede operar con cualquier tipo de corriente de carga. Las soluciones que funcionan en el lazo abierto suelen preformar el control de balance de carga con mínimo tiempo, así reducen la duración del transitorio y tienen un impacto menor a las pérdidas del sistema. Por otro lado, esas soluciones demuestran una alta sensibilidad a las tolerancias y parásitos de los componentes. 5. El AEP debería inyectar la corriente a la salida en una manera controlada, así se reduce el riesgo de unas corrientes elevadas y potencialmente peligrosas y se incrementa la robustez del sistema bajo las perturbaciones de la tensión de entrada. Ese problema suele ser relacionado con los sistemas donde el AEP es implementado como un convertidor auxiliar. El convertidor auxiliar es diseñado para una potencia baja, con lo cual, los dispositivos elegidos son de baja corriente/potencia. Si la corriente no es controlada, bajo un pico de tensión de entrada provocada por otro parte del sistema (por ejemplo, otro convertidor conectado al mismo bus), se puede llegar a un pico en la corriente auxiliar que puede causar la perturbación de tensión de salida e incluso el fallo de los dispositivos del convertidor auxiliar. Sin embargo, cuando la corriente es controlada, usando control del pico de corriente o control con histéresis, la corriente auxiliar tiene el control con prealimentación (feed-forward) de tensión de entrada y la corriente es definida y limitada. Por otro lado, si la solución utiliza el control de balance de carga, el sistema puede actuar de forma deficiente si la tensión de entrada tiene un valor diferente del nominal, provocando que el AEP inyecta/toma más/menos carga que necesitada. 6. Escalabilidad del sistema a convertidores multifase. Como ya ha sido comentado anteriormente, para las aplicaciones VRM por la corriente de carga elevada, el convertidor principal suele ser implementado como multifase para distribuir las perdidas entre las fases y bajar el estrés térmico de los dispositivos. Para asegurar el reparto de las corrientes, normalmente un control de modo corriente es usado. Las soluciones de SoA que usan VMC son limitadas a la implementación con solo una fase. Esta tesis propone un nuevo método de control del flujo de energía por el AEP y el convertidor principal. El concepto propuesto se basa en la inyección controlada de la corriente auxiliar al nodo de salida donde la amplitud de la corriente es n-1 veces mayor que la corriente del condensador de salida con las direcciones apropiadas. De esta manera, el AEP genera un condensador virtual cuya capacidad es n veces mayor que el condensador físico y reduce la impedancia de salida. Como el concepto propuesto reduce la impedancia de salida usando el AEP, el concepto es llamado Output Impedance Correction Circuit (OICC) concept. El concepto se desarrolla para un convertidor tipo reductor síncrono multifase con control modo de corriente CMC (incluyendo e implementación con una fase) y puede operar con la tensión de salida constante o con AVP. Además, el concepto es extendido a un convertidor de una fase con control modo de tensión VMC. Durante la operación, el control de tensión de salida de convertidor principal y control de corriente del subsistema OICC están siempre cerrados, incrementando la robustez a las tolerancias de componentes y a los parásitos del cirquito y permitiendo que el sistema se pueda enfrentar a cualquier tipo de la corriente de carga. Según el método de control propuesto, el sistema se puede encontrar en dos estados: durante el régimen permanente, el sistema se encuentra en el estado Idle y el subsistema OICC esta desactivado. Por otro lado, durante el transitorio, el sistema se encuentra en estado Activo y el subsistema OICC está activado para reducir la impedancia de salida. El cambio entre los estados se hace de forma autónoma: el sistema entra en el estado Activo observando la corriente de condensador de salida y vuelve al estado Idle cunado el nuevo régimen permanente es detectado, observando las variables del estado. La validación del concepto OICC es hecha aplicándolo a un convertidor tipo reductor síncrono con dos fases y de 30W cuyo condensador de salida tiene capacidad de 140μF, mientras el factor de multiplicación n es 15, generando en el estado Activo el condensador virtual de 2.1mF. El subsistema OICC es implementado como un convertidor tipo reductor síncrono con PCMC. Comparando el funcionamiento del convertidor con y sin el OICC, los resultados demuestran que se ha logrado una reducción de la desviación de tensión de salida con factor 12, tanto con funcionamiento básico como con funcionamiento AVP. Además, los resultados son comparados con un prototipo de referencia que tiene la misma etapa de potencia y un condensador de salida físico de 2.1mF. Los resultados demuestran que los dos sistemas tienen el mismo comportamiento dinámico. Más aun, se ha cuantificado el impacto en las pérdidas del sistema operando bajo una corriente de carga pulsante y bajo DVS. Se demuestra que el sistema con OICC mejora el rendimiento del sistema, considerando las pérdidas cuando el sistema trabaja con la carga pulsante y con DVS. Por lo último, el condensador de salida de sistema con OICC es mucho más pequeño que el condensador de salida del convertidor de referencia, con lo cual, por usar el concepto OICC, la densidad de energía se incrementa. En resumen, las contribuciones principales de la tesis son: • El concepto propuesto de Output Impedance Correction Circuit (OICC), • El control a nivel de sistema basado en el método usado para cambiar los estados de operación, • La implementación del subsistema OICC en lazo cerrado conjunto con la implementación del convertidor principal, • La cuantificación de las perdidas dinámicas bajo la carga pulsante y bajo la operación DVS, y • La robustez del sistema bajo la variación del condensador de salida y bajo los escalones de carga consecutiva. ABSTRACT Development of new technologies allows engineers to push the performance of the integrated circuits to its limits. New generations of processors, DSPs or FPGAs are able to process information with high speed and high consumption or to wait in low power mode with minimum possible consumption. This huge variation in power consumption and the short time needed to change from one level to another, affect the specifications of the Voltage Regulated Module (VRM) that supplies the IC. Furthermore, additional mandatory features, such as Adaptive Voltage Positioning (AVP) and Dynamic Voltage Scaling (DVS), impose opposite trends on the design of the VRM power stage. In order to cope with high load-step amplitudes, the output capacitor of the VRM power stage output filter is drastically oversized, penalizing power density and the efficiency during the DVS operation. Therefore, the ongoing research trend is directed to improve the dynamic response of the VRM while reducing the size of the output capacitor. The output capacitor reduction leads to a smaller cost and longer life-time of the system since the big bulk capacitors, usually implemented with OSCON capacitors, may not be needed to achieve the desired dynamic behavior. An additional advantage is that, by reducing the output capacitance, dynamic voltage scaling (DVS) can be performed faster and with smaller stress on the power stage, since the needed amount of charge to change the output voltage is smaller. The dynamic behavior of the system with a linear control (Voltage mode control, VMC, Peak Current Mode Control, PCMC,…) is limited by the converter switching frequency and filter size. The reduction of the output capacitor can be achieved by increasing the switching frequency of the converter, thus increasing the bandwidth of the system, and/or by applying advanced non-linear controls. Applying nonlinear control, the system variables get saturated in order to reach the new steady-state in a minimum time, thus the output filter, more specifically the output inductor current slew-rate, determines the output voltage response. Therefore, by reducing the output inductor value, the inductor current reaches faster the new steady state, so a smaller amount of charge is taken from the output capacitor during the transient. The drawback of this approach is that the system efficiency is penalized due to increased switching losses and RMS currents. In order to achieve both the output capacitor reduction and high system efficiency, while satisfying strict dynamic specifications, a Multiphase converter system is adopted as a standard for VRM applications. In order to ensure the current sharing among the phases, the multiphase converter is usually implemented with current mode control. In order to overcome the limitation imposed by the output filter, the second possibility to reduce the output capacitor is to apply Topologic modifications of the basic power stage topology in order to increase the slew-rate of the inductor current and, therefore, reduce the transient duration. Since the transient is reduced, smaller amount of charge is taken from the output capacitor under the same load current, thus, the output capacitor can be reduced to achieve the same output voltage deviation. The third possibility to reduce the output capacitor of the converter is to introduce an additional energy path (AEP) to compensate the charge unbalance of the output capacitor, consequently reducing the transient time and output voltage deviation. Doing so, during the steady-state operation the system has high efficiency because the main low-bandwidth converter is designed to operate at moderate switching frequency, to meet the static requirements, whereas the dynamic behavior during the transients is determined by the high-bandwidth auxiliary energy path. The auxiliary energy path can be implemented as a resistive path, as a Linear regulator, LR, or as a switching converter. The first two implementations provide higher bandwidth, at the expense of increasing losses during the transient. On the other hand, the switching converter implementation presents lower bandwidth, limited by the auxiliary converter switching frequency, though it produces smaller losses compared to the two previous implementations. Depending on the application, the implementation and the control strategy of the system, there is a variety of proposed solutions in the State-of-the-Art (SoA), having different features where one solution offers some advantages over the others, but also some disadvantages. In general, an ideal additional energy path system should have the following features: 1. The impact on the system losses should be minimal. During its operation, the AEP generates additional losses, thus ideally, the AEP should operate for a short period of time, only when the transient is occurring; the other option is to have the AEP constantly on, but due to the inductor current ripple compensation at the output, unnecessary losses are generated. 2. The AEP should be activated nearly instantaneously to prevent bigger output voltage deviation. To achieve near instantaneous activation, the converter system can be informed by the load prior to the load-step or the system can observe the output capacitor current, which is the first system state variable that reacts on the load current perturbation. In this manner, the AEP is turned on with near zero output voltage error, providing smaller output voltage deviation. 3. The AEP should be deactivated once the new steady state is reached to avoid additional settling transients. Most of the SoA solutions estimate duration of the transient which may cause additional transient if the estimation is not performed correctly (e.g. if the main converter inductor current has higher or lower value than needed, the slow regulator of the main converter needs to compensate the difference after the AEP is deactivated). Other SoA solutions are observing state variables, ensuring that the system reaches the new steady state or they are informed by the load. 4. During the transient, at least one subsystem, either the main converter or the AEP, should be in closed-loop. Implementing a closed loop system, preferably the AEP subsystem, due its higher bandwidth, increases the robustness under system tolerances and circuit parasitic. In addition, the AEP can operate with any type of load. The solutions that operate in open loop usually perform minimum time charge balance control, thus reducing the transient length and minimizing the impact on the losses, however they are very sensitive to tolerances and parasitics. 5. The AEP should inject current at the output in a controlled manner, thus reducing the risk of high and potentially damaging currents and increasing robustness on the input voltage deviation. This issue is mainly related to the systems where AEP is implemented as auxiliary converter. The auxiliary converter is designed for small power and, as such, the MOSFETs are rated for small power/currents. If the current is not controlled, due to the some unpredicted spike in input voltage caused by some other part of the system (e.g. different converter), it may lead to a current spike in auxiliary current which will cause the perturbation of the output voltage and even failure of the switching components of auxiliary converter. In the case when the current is controlled, using peak CMC or Hysteretic Window CMC, the auxiliary converter has inherent feed-forwarding of the input voltage in current control and the current is defined and limited. Furthermore, if the solution employs charge balance control, the system may perform poorly if the input voltage has different value than the nominal, causing that AEP injects/extracts more/less charge than needed. 6. Scalability of the system to multiphase converters. As commented previously, in VRM applications, due to the high load currents, the main converters are implemented as multiphase to redistribute losses among the modules, lowering temperature stress of the components. To ensure the current sharing, usually a Current Mode Control (CMC) is employed. The SoA solutions that are implemented with VMC are limited to a single stage implementation. This thesis proposes a novel control method of the energy flow through the AEP and the main converter system. The proposed concept relays on a controlled injection of the auxiliary current at the output node where the instantaneous current value is n-1 times bigger than the output capacitor current with appropriate directions. Doing so, the AEP creates an equivalent n times bigger virtual capacitor at the output, thus reducing the output impedance. Due to the fact that the proposed concept reduces the output impedance using the AEP, it has been named the Output Impedance Correction Circuit (OICC) concept. The concept is developed for a multiphase CMC synchronous buck converter (including a single phase implementation), operating with a constant output voltage and with AVP feature. Further, it is extended to a single phase VMC synchronous buck converter. During the operation, the main converter voltage loop and the OICC subsystem capacitor current loop is constantly closed, increasing the robustness under system tolerances and circuit parasitic and allowing the system to operate with any load-current shape or pattern. According to the proposed control method, the system operates in two states: during the steady-state the system is in the Idle state and the OICC subsystem is deactivated, while during the load-step transient the system is in the Active state and the OICC subsystem is activated in order to reduce the output impedance. The state changes are performed autonomously: the system enters in the Active state by observing the output capacitor current and it returns back to the Idle state when the steady-state operation is detected by observing the state variables. The validation of the OICC concept has been done by applying it to a 30W two phase synchronous buck converter with 140μF output capacitor and with the multiplication factor n equal to 15, generating during the Active state equivalent output capacitor of 2.1mF. The OICC subsystem is implemented as single phase PCMC synchronous buck converter. Comparing the converter operation with and without the OICC the results demonstrate that the 12 times reduction of the output voltage deviation is achieved, for both basic operation and for the AVP operation. Furthermore, the results have been compared to a reference prototype which has the same power stage and a fiscal output capacitor of 2.1mF. The results show that the two systems have the same dynamic behavior. Moreover, an impact on the system losses under the pulsating load and DVS operation has been quantified and it has been demonstrated that the OICC system has improved the system efficiency, considering the losses when the system operates with the pulsating load and the DVS operation. Lastly, the output capacitor of the OICC system is much smaller than the reference design output capacitor, therefore, by applying the OICC concept the power density can be increased. In summary, the main contributions of the thesis are: • The proposed Output Impedance Correction Circuit (OICC) concept, • The system level control based on the used approach to change the states of operation, • The OICC subsystem closed-loop implementation, together with the main converter implementation, • The dynamic losses under the pulsating load and the DVS operation quantification, and • The system robustness on the capacitor impedance variation and consecutive load-steps.

Del plan a la realidad: gobernanza y toma de decisiones en los procesos de regeneración urbana. El caso de Boston = From plan to reality: governance and decision-making in urban regeneration processes in Boston

En las últimas tres décadas, las dinámicas de restructuración económica a nivel global han redefinido radicalmente el papel de las ciudades. La transición del keynesianismo al neoliberalismo ha provocado un cambio en las políticas urbanas de los gobiernos municipales, que han abandonado progresivamente las tareas de regulación y redistribución para centrarse en la promoción del crecimiento económico y la competitividad. En este contexto, muchas voces críticas han señalado que la regeneración urbana se ha convertido en un vehículo de extracción de valor de la ciudad y está provocando la expulsión de los ciudadanos más vulnerables. Sin embargo, la regeneración de áreas consolidadas supone también una oportunidad de mejora de las condiciones de vida de la población residente, y es una política necesaria para controlar la expansión de la ciudad y reducir las necesidades de desplazamiento, promoviendo así ciudades más sostenibles. Partiendo de la hipótesis de que la gobernanza de los procesos de regeneración urbana es clave en el resultado final de las operaciones y determina el modelo de ciudad resultante, el objetivo de esta investigación es verificar si la regeneración urbana es necesariamente un mecanismo de extracción de valor o si puede mejorar la calidad de vida en las ciudades a través de la participación de los ciudadanos. Para ello, propone un marco de análisis del proceso de toma de decisiones en los planes de regeneración urbana y su impacto en los resultados de los planes, tomando como caso de estudio la ciudad de Boston, que desde los años 1990 trata de convertirse en una “ciudad de los barrios”, fomentando la participación ciudadana al tiempo que se posiciona en la escena económica global. El análisis se centra en dos operaciones de regeneración iniciadas a finales de los años 1990. Por un lado, el caso de Jackson Square nos permite comprender el papel de la sociedad civil y el tercer sector en la regeneración de los barrios más desfavorecidos, en un claro ejemplo de urbanismo “desde abajo” (bottom-up planning). Por otro, la reconversión del frente marítimo de South Boston para la construcción del Distrito de Innovación nos acerca a las grandes operaciones de regeneración urbana con fines de estímulo económico, tradicionalmente vinculadas a los centros financieros (downtown) y dirigidas por las élites gubernamentales y económicas (la growth machine) a través de procesos más tecnocráticos (top-down planning). La metodología utilizada consiste en el análisis cualitativo de los procesos de toma de decisiones y la relación entre los agentes implicados, así como de la evaluación de la implementación de dichas decisiones y su influencia en el modelo urbano resultante. El análisis de los casos permite afirmar que la gobernanza de los procesos de regeneración urbana influye decisivamente en el resultado final de las intervenciones; sin embargo, la participación de la comunidad local en la toma de decisiones no es suficiente para que el resultado de la regeneración urbana contrarreste los efectos de la neoliberalización, especialmente si se limita a la fase de planeamiento y no se extiende a la fase de ejecución, y si no está apoyada por una movilización política de mayor alcance que asegure una acción pública redistributiva. Asimismo, puede afirmarse que los procesos de regeneración urbana suponen una redefinición del modelo de ciudad, dado que la elección de los espacios de intervención tiene consecuencias sobre el equilibrio territorial de la ciudad. Los resultados de esta investigación tienen implicaciones para la disciplina del planeamiento urbano. Por una parte, se confirma la vigencia del paradigma del “urbanismo negociado”, si bien bajo discursos de liderazgo público y sin apelación al protagonismo del sector privado. Por otra parte, la planificación colaborativa en un contexto de “responsabilización” de las organizaciones comunitarias puede desactivar la potencia política de la participación ciudadana y servir como “amortiguador” hacia el gobierno local. Asimismo, la sustitución del planeamiento general como instrumento de definición de la ciudad futura por una planificación oportunista basada en la actuación en áreas estratégicas que tiren del resto de la ciudad, no permite definir un modelo coherente y consensuado de la ciudad que se desea colectivamente, ni permite utilizar el planeamiento como mecanismo de redistribución. ABSTRACT In the past three decades, the dynamics of global economic restructuring have radically redefined the role of cities. The transition from keynesianism to neoliberalism has caused a shift in local governments’ urban policies, which have progressively abandoned the tasks of regulation and redistribution to focus on promoting economic growth and competitiveness. In this context, many critics have pointed out that urban regeneration has become a vehicle for extracting value from the city and is causing the expulsion of the most vulnerable citizens. However, regeneration of consolidated areas is also an opportunity to improve the living conditions of the resident population, and is a necessary policy to control the expansion of the city and reduce the need for transportation, thus promoting more sustainable cities. Assuming that the governance of urban regeneration processes is key to the final outcome of the plans and determines the resulting city model, the goal of this research is to verify whether urban regeneration is necessarily a value extraction mechanism or if it can improve the quality of life in cities through citizens’ participation. It proposes a framework for analysis of decision-making in urban regeneration processes and their impact on the results of the plans, taking as a case study the city of Boston, which since the 1990s is trying to become a "city of neighborhoods", encouraging citizen participation, while seeking to position itself in the global economic scene. The analysis focuses on two redevelopment plans initiated in the late 1990s. The Jackson Square case allows us to understand the role of civil society and the third sector in the regeneration of disadvantaged neighborhoods, in a clear example of bottom-up planning. On the contrary, the conversion of the South Boston waterfront to build the Innovation District takes us to the big redevelopment efforts with economic stimulus’ goals, traditionally linked to downtowns and led by government and economic elites (the local “growth machine”) through more technocratic processes (top-down planning). The research is based on a qualitative analysis of the processes of decision making and the relationship between those involved, as well as the evaluation of the implementation of those decisions and their influence on the resulting urban model. The analysis suggests that the governance of urban regeneration processes decisively influences the outcome of interventions; however, community engagement in the decision-making process is not enough for the result of the urban regeneration to counteract the effects of neoliberalization, especially if it is limited to the planning phase and does not extend to the implementation of the projects, and if it is not supported by a broader political mobilization to ensure a redistributive public action. Moreover, urban regeneration processes redefine the urban model, since the choice of intervention areas has important consequences for the territorial balance of the city. The results of this study have implications for the discipline of urban planning. On the one hand, it confirms the validity of the "negotiated planning" paradigm, albeit under public leadership discourse and without a direct appeal to the leadership role of the private sector. On the other hand, collaborative planning in a context of "responsibilization" of community based organizations can deactivate the political power of citizen participation and serve as a "buffer" towards the local government. Furthermore, the replacement of comprehensive planning, as a tool for defining the city's future, by an opportunistic planning based on intervention in strategic areas that are supposed to induce change in the rest of the city, does not allow a coherent and consensual urban model that is collectively desired, nor it allows to use planning as a redistribution mechanism.

Loss of p21 increases sensitivity to ionizing radiation and delays the onset of lymphoma in atm-deficient mice

Ataxia telangiectasia (AT) is an autosomal recessive disorder characterized by growth retardation, cerebellar ataxia, oculocutaneous telangiectasias, and a high incidence of lymphomas and leukemias. In addition, AT patients are sensitive to ionizing radiation. Atm-deficient mice recapitulate most of the AT phenotype. p21cip1/waf1 (p21 hereafter), an inhibitor of cyclin-dependent kinases, has been implicated in cellular senescence and response to γ-radiation-induced DNA damage. To study the role of p21 in ATM-mediated signal transduction pathways, we examined the combined effect of the genetic loss of atm and p21 on growth control, radiation sensitivity, and tumorigenesis. As might have been expected, our data provide evidence that p21 modifies the in vitro senescent response seen in AT fibroblasts. Further, it is a downstream effector of ATM-mediated growth control. In addition, however, we find that loss of p21 in the context of an atm-deficient mouse leads to a delay in thymic lymphomagenesis and an increase in acute radiation sensitivity in vivo (the latter principally because of effects on the gut epithelium). Modification of these two crucial aspects of the ATM phenotype can be related to an apparent increase in spontaneous apoptosis seen in tumor cells and in the irradiated intestinal epithelium of mice doubly null for atm and p21. Thus, loss of p21 seems to contribute to tumor suppression by a mechanism that operates via a sensitized apoptotic response. These results have implications for cancer therapy in general and AT patients in particular.

Sulfur K-edge x-ray absorption spectroscopy: A spectroscopic tool to examine the redox state of S-containing metabolites in vivo

The sulfur K-edge x-ray absorption spectra for the amino acids cysteine and methionine and their corresponding oxidized forms cystine and methionine sulfoxide are presented. Distinct differences in the shape of the edge and the inflection point energy for cysteine and cystine are observed. For methionine sulfoxide the inflection point energy is 2.8 eV higher compared with methionine. Glutathione, the most abundant thiol in animal cells, also has been investigated. The x-ray absorption near-edge structure spectrum of reduced glutathione resembles that of cysteine, whereas the spectrum of oxidized glutathione resembles that of cystine. The characteristic differences between the thiol and disulfide spectra enable one to determine the redox status (thiol to disulfide ratio) in intact biological systems, such as unbroken cells, where glutathione and cyst(e)ine are the two major sulfur-containing components. The sulfur K-edge spectra for whole human blood, plasma, and erythrocytes are shown. The erythrocyte sulfur K-edge spectrum is similar to that of fully reduced glutathione. Simulation of the plasma spectrum indicated 32% thiol and 68% disulfide sulfur. The whole blood spectrum can be simulated by a combination of 46% disulfide and 54% thiol sulfur.

Mapping the awareness of inequalities in health programs in Spanish communities: moving forward together

The aim of this study is to map the awareness of gender, socioeconomic, immigrant and ethnic health inequalities in health at schools, maternal health and traffic injury health prevention programs. The study was conducted in the 19 health descentralized areas in Spain, 17 autonomous community (ACs) and the 2 autonomous cities (ACities). The data were collected from May 2008 to January 2009. The unit of analysis was the collection of policy documents setting out the programs mentioned above and the related support material in each AC. A reading guide was used to analyze the awareness of inequalities. With regard to health at schools, 2 of 10 programs show a high awareness of inequalities and include many specific proposals to be implemented at the local level. Regarding maternal health, 13 ACs have prepared support material with high awareness of inequalities to be implemented. A traffic injury program has been created in two ACs. We map the whole situation in Spain regarding the health programs that we have used as examples and their awareness of inequalities. We can conclude that there are differences between the regions studied in Spain and in general, the awareness of inequalities is low.

A metabolomic approach to study the rhizodeposition in the tritrophic interaction: tomato, Pochonia chlamydosporia and Meloidogyne javanica

A combined chemometrics-metabolomics approach [excitation–emission matrix (EEM) fluorescence spectroscopy, nuclear magnetic resonance (NMR) and high performance liquid chromatography–mass spectrometry (HPLC–MS)] was used to analyse the rhizodeposition of the tritrophic system: tomato, the plant-parasitic nematode Meloidogyne javanica and the nematode-egg parasitic fungus Pochonia chlamydosporia. Exudates from M. javanica roots were sampled at root penetration (early) and gall development (late). EMM indicated that late root exudates from M. javanica treatments contained more aromatic amino acid compounds than the rest (control, P. chlamydosporia or P. chlamydosporia and M. javanica). 1H NMR showed that organic acids (acetate, lactate, malate, succinate and formic acid) and one unassigned aromatic compound (peak no. 22) were the most relevant metabolites in root exudates. Robust principal component analysis (PCA) grouped early exudates for nematode (PC1) or fungus presence (PC3). PCA found (PC1, 73.31 %) increased acetate and reduced lactate and an unassigned peak no. 22 characteristic of M. javanica root exudates resulting from nematode invasion and feeding. An increase of peak no. 22 (PC3, 4.82 %) characteristic of P. chlamydosporia exudates could be a plant “primer” defence. In late ones in PC3 (8.73 %) the presence of the nematode grouped the samples. HPLC–MS determined rhizosphere fingerprints of 16 (early) and 25 (late exudates) m/z signals, respectively. Late signals were exclusive from M. javanica exudates confirming EEM and 1H NMR results. A 235 m/z signal reduced in M. javanica root exudates (early and late) could be a repressed plant defense. This metabolomic approach and other rhizosphere -omics studies could help to improve plant growth and reduce nematode damage sustainably.

Does the scientific evidence support the advertising claims made for products containing Lactobacillus casei and Bifidobacterium lactis? A systematic review

Background To analyse the scientific evidence that exists for the advertising claims made for two products containing Lactobacillus casei and Bifidobacterium lactis and to conduct a comparison between the published literature and what is presented in the corporate website. Methods Systematic review, using Medline through Pubmed and Embase. We included human clinical trials that exclusively measured the effect of Lactobacillus casei or Bifidobacterium lactis on a healthy population, and where the objective was related to the health claims made for certain products in advertising. We assessed the levels of evidence and the strength of the recommendation according to the classification criteria established by the Oxford Centre for Evidence Based Medicine (CEBM). We also assessed the outcomes of the studies published on the website that did not appear in the search. Results Of the 440 articles identified, 16 met the inclusion criteria. Only four (25%) of these presented a level of evidence of 1b and a recommendation grade of A, all corresponding to studies on product containing Bifidobacterium lactis, and only 12 of the 16 studies were published on the corporate website (47). Conclusions There is insufficient scientific evidence to support the health claims made for these products, especially in the case of product containing Lactobacillus casei.

Evaluation of the potential of InSAR time series to study the spatio-temporal evolution of piezometric levels in the Madrid aquifer

The Tertiary detritic aquifer of Madrid (TDAM), with an average thickness of 1500 m and a heterogeneous, anisotropic structure, supplies water to Madrid, the most populated city of Spain (3.2 million inhabitants in the metropolitan area). Besides its complex structure, a previous work focused in the north-northwest of Madrid city showed that the aquifer behaves quasi elastically trough extraction/recovery cycles and ground uplifting during recovery periods compensates most of the ground subsidence measured during previous extraction periods (Ezquerro et al., 2014). Therefore, the relationship between ground deformation and groundwater level through time can be simulated using simple elastic models. In this work, we model the temporal evolution of the piezometric level in 19 wells of the TDAM in the period 1997–2010. Using InSAR and piezometric time series spanning the studied period, we first estimate the elastic storage coefficient (Ske) for every well. Both, the Ske of each well and the average Ske of all wells, are used to predict hydraulic heads at the different well locations during the study period and compared against the measured hydraulic heads, leading to very similar errors when using the Ske of each well and the average Ske of all wells: 14 and 16 % on average respectively. This result suggests that an average Ske can be used to estimate piezometric level variations in all the points where ground deformation has been measured by InSAR, thus allowing production of piezometric level maps for the different extraction/recovery cycles in the TDAM.

Making the Most of EU Labour Mobility. Report of a CEPS Task Force in Cooperation with the Bertelsmann Foundation. CEPS Task Force Report, 7 October 2014

This Task Force report combines the most recent data from Eurostat with national sources to highlight the most significant labour mobility trends within the EU. Overall, the recent recession has not induced previously immobile workers to become more mobile, at least not in the larger member states. Mobility flows have moved away from crisis countries in response to the economic downturn but the desired increase in south-north mobility has not been observed so far. This leads the authors to conclude that successfully fostering mobility within EU15 countries requires tremendous effort. It is important that workers who are willing and able to move are not discouraged from doing so by unnecessary barriers to mobility. Improving the workings of the EURES system and its online job-matching platform; better cooperation of national employment agencies; streamlining the recognition of qualifications; and supporting language training within the EU are important contributions to labour mobility. The authors conclude that the EU is right to defend the free movement of workers. National governments should keep in mind that their ability to tap into an attractive foreign labour supply also hinges upon the perception of how mobile workers are treated in destination countries. If the political imperative requires regulations to be changed, such as the one guiding the coordination of social security, it is essential that no new mobility barriers are put in place.

Hostages to Moscow, clients of Beijing. Security in Central Asia as the role of the West diminishes. OSW Study 10/2014

The goal of this publication is to attempt to assess the thirteen years (2001- -2014) of the West’s military presence in the countries of post-Soviet Central Asia, closely associated with the ISAF and OEF-A (Operation Enduring Freedom – Afghanistan) missions in Afghanistan. There will also be an analysis of the actual challenges for the region’s stability after 2014. The current and future security architecture in Central Asia will also be looked at closely, as will the actual capabilities to counteract the most serious threats within its framework. The need to separately handle the security system in Central Asia and security as such is dictated by the particularities of political situation in the region, the key mechanism of which is geopolitics understood as global superpower rivalry for influence with a secondary or even instrumental role of the five regional states, while ignoring their internal problems. Such an approach is especially present in Russia’s perception of Central Asia, as it views security issues in geopolitical categories. Because of this, security analysis in the Central Asian region requires a broader geopolitical context, which was taken into account in this publication. The first part investigates the impact of the Western (primarily US) military and political presence on the region’s geopolitical architecture between 2001 and 2014. The second chapter is an attempt to take an objective look at the real challenges to regional security after the withdrawal of the coalition forces from Afghanistan, while the third chapter is dedicated to analysing the probable course of events in the security dimension following 2014. The accuracy of predictions time-wise included in the below publication does not exceed three to five years due to the dynamic developments in Central Asia and its immediate vicinity (the former Soviet Union, Afghanistan, Pakistan, Iran), and because of the large degree of unpredictability of policies of one of the key regional actors – Russia (both in the terms of its activity on the international arena, and its internal developments).

Domain Globalization: Using Languages to Support Technical and Social Coordination

When a project is realized in a globalized environment, multiple stakeholders from different organizations work on the same system. Depending on the stakeholders and their organizations, various (possibly overlapping) concerns are raised in the development of the system. In this context a Domain Specific Language (DSL) supports the work of a group of stakeholders who are responsible for addressing a specific set of concerns. This chapter identifies the open challenges arising from the coordination of globalized domain-specific languages. We identify two types of coordination: technical coordination and social coordination. After presenting an overview of the current state of the art, we discuss first the open challenges arising from the composition of multiple DSLs, and then the open challenges associated to the collaboration in a globalized environment.

A randomized, controlled trial to determine the efficacy of paper tape in preventing hypertrophic scar formation in surgical incisions that traverse Langer's skin tension lines

Background: How a scar is managed postoperatively influences Its cosmetic outcome. After Suture removal, scars are susceptible to skin tension, which may be the trigger for hypertrophic scarring. Paper tape to support the scar may reduce multidirectional forces and prevent hypertrophic scarring. Methods: Seventy patients who had under gone cesarean section at the Royal Brisbane and Women's Hospital were randomized to treatment and control groups. Patients in the control group received no postoperative intervention. Patients in the treatment group applied paper tape to their scars for 12 weeks. Scars were assessed at 6 weeks, 12 weeks, and 6 months after surgery using Ultrasound to measure intradermal scar volume. Scars were also assessed using the International Clinical Recommendations. Results: Paper tape significantly decreased scar volume by a mean of 0.16 cm(3), (95 percent confidence Interval, 0.00 to 0.29 cm(3)) At 12 weeks after surgery, 41 percent of the control group developed hypertrophic scars compared with none in the treatment group (exact test, p = 0.003). In the treatment group, one patient developed a hypertrophic scar and four developed stretched scars only after the tape was removed. The odds of developing a hypertrophic scar were 13.6 times greater in the control than in the treatment group (95 percent confidence interval, 3.6 to 66.9). Of the 70 patients randomized, 39 completed the study. Four patients in the treatment group developed a localized red rash beneath the tape. These reactions were minor and transient and resolved without medical intervention. Conclusions: The development of hypertrophic and stretched scars in the treatment group only after the tape was removed suggests that tension acting on a scar is die trigger for hypertrophic scarring. Paper tape is likely to be an effective modality for the prevention of hypertrophic scarring through its ability to eliminate scar tension.

Narrowing of the inferior dental canal in relation to the lower third molars

Objectives: To assess narrowing of the inferior dental canal in the lower third molar regions using computed tomography (CT) and to determine the value of radiographic markers on rotational panoramic radiographs in assessing the true relationships of the inferior dental canal. Methods: Patients referred for CT assessment of impacted lower third molars were used in this study. The lower third molars were assessed using CT to determine the position and morphology of the inferior dental canal relative to the roots and the cortical plates. The radiographic markers on rotational panoramic radiographs were correlated with the CT findings when rotational panoramic radiographs were available. Results: The patients referred had 202 lower third molars. Inferior positioning of the inferior dental canal was the most common location on CT. Narrowing of the inferior dental canal was found in relation to the lower third molars in 66.8% of cases. The chance of narrowing of the inferior dental canal as shown using CT increased when at least one of the radiographic markers, superimposition, narrowing, deviation or reduction in density was present on the rotational panoramic radiograph. Deviation of the inferior dental canal on rotational panoramic radiographs was found to be the most significant predictor of narrowing of the inferior dental canal and a close relationship to the roots, as shown in CT. Conclusions: Narrowing of the inferior dental canal is a common finding when impacted lower third molars are assessed using CT. On rotational panoramic radiographs deviation of the inferior dental canal is the best predictor of narrowing of the inferior dental canal and a close relationship to the roots.

The mismatch negativity (MMN) response to complex tones and spoken words in individuals with aphasia

Background: The mismatch negativity (MMN) is a fronto-centrally distributed event-related potential (ERP) that is elicited by any discriminable auditory change. It is an ideal neurophysiological tool for measuring the auditory processing skills of individuals with aphasia because it can be elicited even in the absence of attention. Previous MMN studies have shown that acoustic processing of tone or pitch deviance is relatively preserved in aphasia, whereas the basic acoustic processing of speech stimuli can be impaired (e.g., auditory discrimination). However, no MMN study has yet investigated the higher levels of auditory processing, such as language-specific phonological and/or lexical processing, in individuals with aphasia. Aims: The aim of the current study was to investigate the MMN response of normal and language-disordered subjects to tone stimuli and speech stimuli that incorporate the basic auditory processing (acoustic, acoustic-phonetic) levels of non-speech and speech sound processing, and also the language-specific phonological and lexical levels of spoken word processing. Furthermore, this study aimed to correlate the aphasic MMN data with language performance on a variety of tasks specifically targeted at the different levels of spoken word processing. Methods M Procedures: Six adults with aphasia (71.7 years +/- 3.0) and six healthy age-, gender-, and education-matched controls (72.2 years +/- 5.4) participated in the study. All subjects were right-handed and native speakers of English. Each subject was presented with complex harmonic tone stimuli, differing in pitch or duration, and consonant-vowel (CV) speech stimuli (non-word /de:/versus real world/deI/). The probability of the deviant for each tone or speech contrast was 10%. The subjects were also presented with the same stimuli in behavioural discrimination tasks, and were administered a language assessment battery to measure their auditory comprehension skills. Outcomes O Results: The aphasic subjects demonstrated attenuated MMN responses to complex tone duration deviance and to speech stimuli (words and non-words), and their responses to the frequency, duration, and real word deviant stimuli were found to strongly correlate with performance on the auditory comprehension section of the Western Aphasia Battery (WAB). Furthermore, deficits in attentional lexical decision skills demonstrated by the aphasic subjects correlated with a word-related enhancement demonstrated during the automatic MMN paradigm, providing evidence to support the word advantage effect, thought to reflect the activation of language-specific memory traces in the brain for words. Conclusions: These results indicate that the MMN may be used as a technique for investigating general and more specific auditory comprehension skills of individuals with aphasia, using speech and/or non-speech stimuli, independent of the individual's attention. The combined use of the objective MMN technique and current clinical language assessments may result in improved rehabilitative management of aphasic individuals.