Down scaling to regional assessment of greenhouse gas emissions to enable consistency in accounting for emissions reduction projects and national inventory accounts for northern beef production in Australia

This paper explores the effect of using regional data for livestock attributes on estimation of greenhouse gas (GHG) emissions for the northern beef industry in Australia, compared with using state/territory-wide values, as currently used in Australia’s national GHG inventory report. Regional GHG emissions associated with beef production are reported for 21 defined agricultural statistical regions within state/territory jurisdictions. A management scenario for reduced emissions that could qualify as an Emissions Reduction Fund (ERF) project was used to illustrate the effect of regional level model parameters on estimated abatement levels. Using regional parameters, instead of state level parameters, for liveweight (LW), LW gain and proportion of cows lactating and an expanded number of livestock classes, gives a 5.2% reduction in estimated emissions (range +12% to –34% across regions). Estimated GHG emissions intensity (emissions per kilogram of LW sold) varied across the regions by up to 2.5-fold, ranging from 10.5 kg CO2-e kg–1 LW sold for Darling Downs, Queensland, through to 25.8 kg CO2-e kg–1 LW sold for the Pindan and North Kimberley, Western Australia. This range was driven by differences in production efficiency, reproduction rate, growth rate and survival. This suggests that some regions in northern Australia are likely to have substantial opportunities for GHG abatement and higher livestock income. However, this must be coupled with the availability of management activities that can be implemented to improve production efficiency; wet season phosphorus (P) supplementation being one such practice. An ERF case study comparison showed that P supplementation of a typical-sized herd produced an estimated reduction of 622 t CO2-e year–1, or 7%, compared with a non-P supplemented herd. However, the different model parameters used by the National Inventory Report and ERF project means that there was an anomaly between the herd emissions for project cattle excised from the national accounts (13 479 t CO2-e year–1) and the baseline herd emissions estimated for the ERF project (8 896 t CO2-e year–1) before P supplementation was implemented. Regionalising livestock model parameters in both ERF projects and the national accounts offers the attraction of being able to more easily and accurately reflect emissions savings from this type of emissions reduction project in Australia’s national GHG accounts.

Resource use and greenhouse gas emissions from grain-finishing beef cattle in seven Australian feedlots: a life cycle assessment

Grain finishing of cattle has become increasingly common in Australia over the past 30 years. However, interest in the associated environmental impacts and resource use is increasing and requires detailed analysis. In this study we conducted a life cycle assessment (LCA) to investigate impacts of the grain-finishing stage for cattle in seven feedlots in eastern Australia, with a particular focus on the feedlot stage, including the impacts from producing the ration, feedlot operations, transport, and livestock emissions while cattle are in the feedlot (gate-to-gate). The functional unit was 1 kg of liveweight gain (LWG) for the feedlot stage and results are included for the full supply chain (cradle-to-gate), reported per kilogram of liveweight (LW) at the point of slaughter. Three classes of cattle produced for different markets were studied: short-fed domestic market (55–80 days on feed), mid-fed export (108–164 days on feed) and long-fed export (>300 days on feed). In the feedlot stage, mean fresh water consumption was found to vary from 171.9 to 672.6 L/kg LWG and mean stress-weighted water use ranged from 100.9 to 193.2 water stress index eq. L/kg LWG. Irrigation contributed 57–91% of total fresh water consumption with differences mainly related to the availability of irrigation water near the feedlot and the use of irrigated feed inputs in rations. Mean fossil energy demand ranged from 16.5 to 34.2 MJ lower heating values/kg LWG and arable land occupation from 18.7 to 40.5 m2/kg LWG in the feedlot stage. Mean greenhouse gas (GHG) emissions in the feedlot stage ranged from 4.6 to 9.5 kg CO2-e/kg LWG (excluding land use and direct land-use change emissions). Emissions were dominated by enteric methane and contributions from the production, transport and milling of feed inputs. Linear regression analysis showed that the feed conversion ratio was able to explain >86% of the variation in GHG intensity and energy demand. The feedlot stage contributed between 26% and 44% of total slaughter weight for the classes of cattle fed, whereas the contribution of this phase to resource use varied from 4% to 96% showing impacts from the finishing phase varied considerably, compared with the breeding and backgrounding. GHG emissions and total land occupation per kilogram of LWG during the grain finishing phase were lower than emissions from breeding and backgrounding, resulting in lower life-time emissions for grain-finished cattle compared with grass finishing.

Essays in Greenhouse/Nursery Economics

This dissertation focuses on the greenhouse and nursery industry in the United States. Two major issues are explored: irrigation and plant disease. The first two essays examine wireless soil-moisture sensor networks, an emerging technology that measures soil moisture and optimizes irrigation levels in real time. The first essay describes a study in which a nationwide survey of commercial growers was administered to generate estimates of grower demand and willingness to pay for sensor networks. We find that adoption rates for a base system and demand for expansion components are decreasing in price, as expected. The price elasticity of the probability of adoption suggests that sensor networks are likely to diffuse at a rate somewhat greater than that of drip irrigation. In the second essay, yields, time-to-harvest, and plant quality were analyzed to measure sensor network profitability. Sensor-based irrigation was found to increase revenue by 62% and profit by 65% per year. The third essay investigates greenhouse nursery growers’ response to a quarantine imposed on the west coast of the United States from 2002 to present for the plant pathogen that causes Sudden Oak Death. I investigate whether growers choose to 1) improve their sanitation practices, which reduces the underlying risk of disease without increasing the difficulty of detecting the pathogen, 2) increase fungicide use, which also prevents disease but makes existing infections much harder to detect, or 3) change their crop composition towards more resistant species. First, a theoretical model is derived to formalize hypotheses on grower responses to the quarantine, and then these predictions are empirically tested using several public data sources. I do not find evidence that growers improve their sanitation practices in response to the quarantine. I do, however, find evidence that growers heavily increase their fungicide use in response to a quarantine policy that requires visual (as opposed to laboratory) inspection for the disease before every crop shipment, suggesting that the quarantine may have the adverse effect of making the pathogen harder to identify. I also do find evidence that growers shift away from susceptible crops and towards resistant crops.

Branch and Bound algorithms in greenhouse climate control

The horticultural sector has become an increasingly important sector of food production, for which greenhouse climate control plays a vital role in improving its sustainability. One of the methods to control the greenhouse climate is Model Predictive Control, which can be optimized through a branch and bound algorithm. The application of the algorithm in literature is examined and analyzed through small examples, and later extended to greenhouse climate simulation. A comparison is made of various alternative objective functions available in literature. Subsequently, a modidified version of the B&B algorithm is presented, which reduces the number of node evaluations required for optimization. Finally, three alternative algorithms are developed and compared to consider the optimization problem from a discrete to a continuous control space.

Comparative study of the dissipation of triadimefon in greenhouse and field conditions

The dissipation of triadimefon, {1-(4-chlorophenoxy)-3,3-dimethyl-1-(1H-1,2,4-triazol-1-yl)butanone}, was studied after its application to melon leaves, glass and paper, both in greenhouse and field conditions. The dissipation rate of triadimefon in its commercial formulation Bayleton 5 was found to be lower in greenhouse than field. The results for different samples in the same conditions show that the dissipation of triadimefon was found to be biphasic. This result can be accounted by a semi-empirical model which assumes an initial fast decline of the dissipation rate, attributed to an exponential decay of the volatilization rates, followed by a second phase where the dissipation is due to a first order degradation processes.The dissipation of triadimefon, {1-(4-chlorophenoxy)-3,3-dimethyl-1-(1H- 1,2,4-triazol-1-yl)butan-one}, was studied after its application to melon leaves, glass and paper, both in greenhouse and field conditions. The dissipation rate of triadimefon in its commercial formulation Bayleton 5 was found to be lower in greenhouse than field. The results for different samples in the same conditions show that the dissipation of triadimefon was found to be biphasic. This result can be accounted by a semi-empirical model which assumes an initial fast decline of the dissipation rate, attributed to an exponential decay of the volatilization rates, followed by a second phase where the dissipation is due to a first order degradation processes.

The impact of occupant behaviour on residential greenhouse gas emissions reduction

In 2011-12, greenhouse gas emissions from the Australian residential sector were 101.6 Mt and are expected to grow by 38% by 2050. In order to reduce these emissions, much emphasis has been placed on increasing the energy efficiency of buildings and appliances. Occupant behaviour, however, is probably the single most significant factor which determines energy use and emissions. This paper describes research undertaken to rank the most common occupant behaviours, based upon their impact on greenhouse gas emissions associated with residential energy use, in an architect-designed house in Australia. The occupant behaviours investigated were changing: the heating and cooling temperature set points, window openings, external blind use and lighting use. Simulations were carried out using Primero and EnergyPlus software. Based on the simulation results of greenhouse gas emissions, the following ranking of overall influence (from most influential to the least) has been determined: external blind use was one of the most effective measures to reduce emissions. Cooling set point temperature was similarly important with the magnitude of impact depending on the set point e.g. a 2°C increase had an impact comparable to the use of external blinds. The impact of the heating set point temperature was also dependent on the set point and overall slightly lower compared to the cooling set point temperature. Lighting use was the least influential parameter in the context of this study.

An Analysis of the Potential Risk Exposure to Lead (Pb) through Urban Community Gardens

Community gardening in cities is increasing, driven by social interaction and food security. City soils are sinks for heavy metals; including neurotoxic lead (Pb). Exposure routes are primarily through inhalation/ingestion of soil, or second by ingestion of plants that have accumulated Pb. This research evaluates soil at three Liberty City, Florida sites estimating risk of Pb exposure through primary and secondary pathways. Soil cores were collected from Liberty City, and red Malabar spinach (Basella rubra) was grown in Pb soil treatments in a greenhouse. Total soil Pb levels and plant tissues were measured after acid digestion, by ICP-OES. In Liberty City, two sites had hotspots with areas of elevated soil Pb levels. Plants grown on Pb contaminated soil all accumulated statistically significant Pb concentrations. Therefore, there is a potential risk of Pb exposure to residents in Liberty City by exposure in hotspot sites through both the primary and secondary pathways.

Composting of different agro-food wastes: Effects of the phenolic and lignocellulosic fractions on greenhouse gases emissions

Currently, society faces a number of challenges related to the large amounts of organic wastes generated and accumulated by the increasing expansion of agroindustrial activities1. Most of these wastes are rich in lignocellulosic compounds, which represents a major fraction of all plant biomass (of above 90%), so, its degradation is crucial for global carbon cycle2. These organic wastes may be introduced directly on agriculture sector as soil organic amendment, however, these might contain phytochemicals, such as phenolic compounds which may introduce toxic effects to soil and to beneficial organisms. Transformation and degradation of these renewable organic wastes into composts (COMPOSTING) is a possible solution for these problems and an environmentally friendly processes that allows make use of natural resources efficiently3. The main potential handicap is generation and emission of greenhouse gases such as carbon dioxide (CO2 ), methane (CH4 ) and nitrous oxide (N2O) and another ones which may led serious problems like nitric oxide (NO) and ammonia (NH3) 4. For this reason, quantification of GHG emissions from composting and finding possible relations with the chemical and structural composition of the wastes used is crucial to the development of technologies for mitigating emissions and should help to make decisions concerning waste management.

Application of multi-criteria decision making methods to compression ignition engine efficiency and gaseous, particulate and greenhouse gas emissions

Compression ignition (CI) engine design is subject to many constraints which presents a multi-criteria optimisation problem that the engine researcher must solve. In particular, the modern CI engine must not only be efficient, but must also deliver low gaseous, particulate and life cycle greenhouse gas emissions so that its impact on urban air quality, human health, and global warming are minimised. Consequently, this study undertakes a multi-criteria analysis which seeks to identify alternative fuels, injection technologies and combustion strategies that could potentially satisfy these CI engine design constraints. Three datasets are analysed with the Preference Ranking Organization Method for Enrichment Evaluations and Geometrical Analysis for Interactive Aid (PROMETHEE-GAIA) algorithm to explore the impact of 1): an ethanol fumigation system, 2): alternative fuels (20 % biodiesel and synthetic diesel) and alternative injection technologies (mechanical direct injection and common rail injection), and 3): various biodiesel fuels made from 3 feedstocks (i.e. soy, tallow, and canola) tested at several blend percentages (20-100 %) on the resulting emissions and efficiency profile of the various test engines. The results show that moderate ethanol substitutions (~20 % by energy) at moderate load, high percentage soy blends (60-100 %), and alternative fuels (biodiesel and synthetic diesel) provide an efficiency and emissions profile that yields the most “preferred” solutions to this multi-criteria engine design problem. Further research is, however, required to reduce Reactive Oxygen Species (ROS) emissions with alternative fuels, and to deliver technologies that do not significantly reduce the median diameter of particle emissions.

Preaching to the converted? Designing wildlife gardening programs to engage the unengaged

If wildlife gardening programs wish to maximize their contribution to the biodiversity of their area, they need to be recruiting individuals who would not have undertaken wildlife activities of their own accord. This study sought to assess which program features equate to the most success in recruiting previously unengaged members. Providing site assessments and native/indigenous plants or vouchers to members were features shown to increase the likelihood of recruiting individuals who were not planning on creating a wildlife garden; however, these are not currently recruiting unengaged participants on a large scale and there is a need to develop other strategies to attract more previously unengaged individuals to the wildlife gardening cause.

2008 Greenhouse Gas Emissions from Selected Iowa Source Categories

This report is the second inventory of point source-specific greenhouse gas emissions conducted by the Department of Natural Resources, covering more industrial sectors and greenhouse gas pollutants than the previous year. This report is required by Iowa Code 455B.851 to be submitted annually to the Iowa General Assembly and the Governor,

2009 Greenhouse Gas Emissions from Selected Iowa Source Categories

This objective report is the third inventory of point source-specific greenhouse gas emissions conducted by the Department of Natural Resources. This report is required by Iowa Code 455B.851

2010 Iowa Greenhouse Gas Inventory Report

This policy-neutral report is the fifth statewide greenhouse gas inventory as required by Iowa Code 455B.104.

2011 Iowa Statewide Greenhouse Gas Emissions Inventory Report

This policy-neutral report is the sixth statewide greenhouse gas inventory conducted for Iowa as required by Iowa Code 455B.104.