Introdução da linguagem CIPE na Maternidade Dr. Francisco Feitinha nos focos gravidez, trabalho de parto e parto

Os sistemas de informação têm cada vez mais importância nos serviços de saúde. Sistemas de informação eficientes, permitem a maximização da gestão dos serviços promovendo a melhoria da qualidade dos cuidados. A ordem dos enfermeiros sugere a implementação de sistemas de registos que englobem necessidades de cuidados, intervenções de enfermagem e resultados dessas mesmas intervenções. A associação portuguesa de enfermeiros faz referência à importância de uma linguagem comum entre os enfermeiros. A linguagem CIPE® “é uma classificação de fenómenos, intervenções e resultados a nível da enfermagem. Pretende ser uma matriz unificadora em que as taxonomias e classificações de enfermagem já existentes se possam entrecruzar, de modo a permitir comparar dados em enfermagem” (CIE,2000:11) A adaptação da linguagem CIPE à gravidez, trabalho de parto e parto, é uma mais-valia no que concerne á realização de registos de qualidade que permitam uma linguagem comum, abrangente e facilitadora da comunicação entre os enfermeiros, e entre estes e outros profissionais de saúde. Através da consulta de bibliografia, dos manuais CIPE® disponíveis, de documentos existentes no serviço, dos processos clínicos e pelos conhecimentos adquiridos durante a especialização de enfermagem de saúde materna e obstetrícia, foi feito o levantamento dos fenómenos, diagnósticos e intervenções de enfermagem em relação aos focos gravidez, trabalho de parto e parto, para futura introdução no sistema informático, tendo em conta as actividades mais frequentes na maternidade para estes focos. A definição de uma Linguagem uniforme a ser utilizada por todos os enfermeiros do serviço, levou a um esforço conjunto da equipa de enfermagem e chefia. Este trabalho continua em curso, uma vez que as actividades que se realizam na maternidade têm que ser todas parametrizadas, o que torna o trabalho de parametrização um pouco mais moroso. Os dados só serão introduzidos no sistema depois da parametrização de todas actividades do serviço. Após a introdução dos dados no sistema informático e da linguagem CIPE perfeitamente adaptada à realidade da maternidade, é nossa convicção que a economia de tempo e a desburocratização dos registos libertará os profissionais para uma relação enfermeiro/utente que se pretende mais humana.

GENESIS: an efficient, transparent and easy to use cluster operating system

Present operating systems are not built to support parallel computing––they do not provide services to manage parallelism, i.e., to globally manage parallel processes and computational resources. The cluster operating environments that are used to assist the execution of parallel applications do not provide support for both programming paradigms, message passing (MP) or distributed shared memory (DSM)––they are mainly offered as separate components implemented at the user level as library and independent server processes. Due to poor operating systems users must deal with clusters as a set of independent computers rather than to see this cluster as a single powerful computer. A single system image (SSI) of the cluster is not offered to users. There is a need for an operating system for clusters. We claim and demonstrate in this paper that it is possible to develop a cluster operating system that is able to efficiently manage parallelism; use cluster resources efficiently; support MP in the form of standard MP and PVM, and DSM; offer SSI; and make it easy to use. We show that to achieve these aims this operating system should inherit many features of a distributed operating system and provide new services which address the needs of parallel processes, cluster's resources, and application developers. In order to substantiate the claim the first version of a cluster operating system managing parallelism and offering SSI, called GENESIS, has been developed.

Hybrid system simulation of computer control applications over communication networks

Discrete event-driven simulations of digital communication networks have been used widely. However, it is difficult to use a network simulator to simulate a hybrid system in which some objects are not discrete event-driven but are continuous time-driven. A networked control system (NCS) is such an application, in which physical process dynamics are continuous by nature. We have designed and implemented a hybrid simulation environment which effectively integrates models of continuous-time plant processes and discrete-event communication networks by extending the open source network simulator NS-2. To do this a synchronisation mechanism was developed to connect a continuous plant simulation with a discrete network simulation. Furthermore, for evaluating co-design approaches in an NCS environment, a piggybacking method was adopted to allow the control period to be adjusted during simulations. The effectiveness of the technique is demonstrated through case studies which simulate a networked control scenario in which the communication and control system properties are defined explicitly.

Performing composition : developing a computer assisted composition system through live coding performance

This thesis maps the author's journey from a music composition practice to a composition and performance practice. The work involves the development of a software library for the purpose of encapsulating compositional ideas in software, and realising these ideas in performance through a live coding computer music practice. The thesis examines what artistic practice emerges through live coding and software development, and does this permit a blurring between the activities of music composition and performance. The role that software design plays in affecting musical outcomes is considered to gain an insight into how software development contributes to artistic development. The relationship between music composition and performance is also examined to identify the means by which engaging in live coding and software development can bring these activities together. The thesis, situated within the discourse of practice led research, documents a journey which uses the experience of software development and performance as a means to guide the direction of the research. The journey serves as an experiment for the author in engaging an hitherto unfamiliar musical practice, and as a roadmap for others seeking to modify or broaden their artistic practice.

A computer image analysis system for microvessel density measurement in solid tumours

Microvessel density (MVD) is a widely used surrogate measure of angiogenesis in pathological specimens and tumour models. Measurement of MVD can be achieved by several methods. Automation of counting methods aims to increase the speed, reliability and reproducibility of these techniques. The image analysis system described here enables MVD measurement to be carried out with minimal expense in any reasonably equipped pathology department or laboratory. It is demonstrated that the system translates easily between tumour types which are suitably stained with minimal calibration. The aim of this paper is to offer this technique to a wider field of researchers in angiogenesis.

A computer-controlled hyperthermia system

Hyperthermia, raised temperature, has been used as a means of treating cancer for centuries. Hippocrates (400 BC) and Galen (200 BC) used red-hot irons to treat small tumours. Much later, after the Renaissance, there are many reports of spontaneous tumour regression in patients with fevers produced by erysipelas, malaria, smallpox, tuberculosis and influenza. These illnesses produce fevers of about 40 °C which last for several days. Temperatures of at least 40 °C were found to be necessary for tumour regression. Towards the end of the nineteenth century pyrogenic bacteria were injected into patients with cancer. In 1896, Coly used a mixture of erysipelas and B. prodigeosus, with some success...

Dynamics of reverse salience as technological performance gap: An empirical study of the personal computer technology system

The evolution of technological systems is hindered by systemic components, referred to as reverse salients, which fail to deliver the necessary level of technological performance thereby inhibiting the performance delivery of the system as a whole. This paper develops a performance gap measure of reverse salience and applies this measurement in the study of the PC (personal computer) technological system, focusing on the evolutions of firstly the CPU (central processing unit) and PC game sub-systems, and secondly the GPU (graphics processing unit) and PC game sub-systems. The measurement of the temporal behavior of reverse salience indicates that the PC game sub-system is the reverse salient, continuously trailing behind the technological performance of the CPU and GPU sub-systems from 1996 through 2006. The technological performance of the PC game sub-system as a reverse salient trails that of the CPU sub-system by up to 2300 MHz with a gradually decreasing performance disparity in recent years. In contrast, the dynamics of the PC game sub-system as a reverse salient trails the GPU sub-system with an ever increasing performance gap throughout the timeframe of analysis. In addition, we further discuss the research and managerial implications of our findings.

Open source computer-vision based guidance system for UAVs on-board decision making

The use of UAVs for remote sensing tasks; e.g. agriculture, search and rescue is increasing. The ability for UAVs to autonomously find a target and perform on-board decision making, such as descending to a new altitude or landing next to a target is a desired capability. Computer-vision functionality allows the Unmanned Aerial Vehicle (UAV) to follow a designated flight plan, detect an object of interest, and change its planned path. In this paper we describe a low cost and an open source system where all image processing is achieved on-board the UAV using a Raspberry Pi 2 microprocessor interfaced with a camera. The Raspberry Pi and the autopilot are physically connected through serial and communicate via MAVProxy. The Raspberry Pi continuously monitors the flight path in real time through USB camera module. The algorithm checks whether the target is captured or not. If the target is detected, the position of the object in frame is represented in Cartesian coordinates and converted into estimate GPS coordinates. In parallel, the autopilot receives the target location approximate GPS and makes a decision to guide the UAV to a new location. This system also has potential uses in the field of Precision Agriculture, plant pest detection and disease outbreaks which cause detrimental financial damage to crop yields if not detected early on. Results show the algorithm is accurate to detect 99% of object of interest and the UAV is capable of navigation and doing on-board decision making.

Digitized Processing Track Generation of a Computer Integrated Multi-Functional 5-Axis Laser Processing System

Based on the computer integrated and flexible laser processing system, an intelligent measuring sub-system was developed. A novel model has been built up to compensate the deviations of the main frame-structure, and a new 3-D laser tracker system is applied to adjust the accuracy of the system. To analyze the characteristic of all kind surfaces of automobile outer penal moulds and dies, classification of types of the surface、brim and ridge(or vale) area to be measured and processed has been established, resulting in one of the main processing functions of the laser processing system. According to different type of surfaces, a 2-D adaptive measuring method based on B?zier curve was developed; furthermore a 3-D adaptive measuring method based on Spline curve was also developed. According to the laser materials processing characteristics and data characteristics, necessary methods have been developed to generate processing tracks, they are explained in details. Measuring experiments and laser processing experiments were carried out to testify the above mentioned methods, which have been applied in the computer integrated and flexible laser processing system developed by the Institute of Mechanics, CAS.

The Intelligent Measuring Sub-System in the Computer Integrated and Flexible Laser Processing System

Based on the computer integrated and flexible laser processing system, develop the intelligent measuring sub-system. A novel model has been built to compensate the deviations of the main frame, a new-developed 3-D laser tracker system is applied to adjust the accuracy of the system. Analyzing the characteristic of all kinds of automobile dies, which is the main processing object of the laser processing system, classify the types of the surface and border needed to be measured and be processed. According to different types of surface and border, develop 2-D adaptive measuring method based on B?zier curve and 3-D adaptive measuring method based on spline curve. During the data processing, a new 3-D probe compensation method has been described in details. Some measuring experiments and laser processing experiments are carried out to testify the methods. All the methods have been applied in the computer integrated and flexible laser processing system invented by the Institute of Mechanics, CAS.