The Kim Dynasty and North-East Asian security:breaking the cycle of crises?

Purpose—This article considers North Korea and the notion of crisis, by linking historical development over the Korean peninsula to the conflict resolution literature, and investigates why despite a large number of destabilizing events, a war involving Pyongyang has yet to erupt. Design/methodology—This article uses historical data and a framework developed by Aggarwal et al., in order to highlight patterns of interaction between states such as the United States, North Korea and South Korea, organizations such as the United Nations, as well as processes such as the Six- Party Talks and the Agreed Framework. The article then develops a crisis framework based on conflict resolution and negotiation literature, and applies it to three North Korean administrations. Findings—Findings suggest that an open- ended understanding of time (for all parties involved on the peninsula) leads to an impossibility to reach a threshold where full- scale war would be triggered, thus leaving parties in a stable state of crisis for which escalating moves and de- escalating techniques might become irrelevant. Practical implications—It is hoped that this article will help further endeavors linking conflict resolution theoretical frameworks to the Korean peninsula security situation. In the case of the Korean peninsula, time has been understood as open-ended, leading parties to a lingering state of heightened hostilities that oscillates toward war, but that is controlled enough not to reach it. In-depth analysis of particular security sectors such as nuclear energy, food security, or missile testing would prove particularly useful in understanding the complexity of the Korean peninsula situation to a greater extent. It is hoped that this paper will help further endeavours linking conflict resolution theoretical frameworks to the Korean peninsula security situation. Originality/value—This research suggests that regarding the Korean peninsula, time has been understood as open- ended, leading parties to a lingering state of heightened.

The Kim Dynasty and North-East Asian security:breaking the cycle of crises

This article considers North Korea and the notion of crisis, by linking historical development over the Korean peninsula to the conflict resolution literature, and investigates why despite a large number of destabilising events, a war involving Pyongyang has yet to erupt. The paper considers historical data and uses a framework developed by Aggarwal et al. in order to highlight patterns of interaction between states such as the United States, North Korea and South Korea, organisations such as the United Nations, as well as processes such as the Six-Party Talk and the Agreed Framework. The paper then develops a crisis framework based on conflict resolution and negotiation literature, and applies it to three North Korean administrations. Findings suggests that an elastic understanding of time (for all parties involved on the peninsula) leads to an impossibility to reach a threshold where full-scale war would be triggered, thus leaving parties in a stable state of crisis for which escalating moves and de-escalating techniques might become irrelevant.

"Rentier States" or the Relationship between Regime Stability and Exercising Power in Post-Soviet Central Asia

The paper intends to give an insight into the relations of the economic and political systems of the Central Asian republics using the theoretical framework of the "rentier economy" and "rentier state" approach. The main findings of the paper are that two (Kazakhstan and Turkmenistan) of the five states examined are commodity export dependent “full-scale” rentier states. The two political systems are of a stable neo-patrimonial regime character, while the Kyrgyz Republic and Tajikistan, poor in natural resources but dependent on external rents, may be described as "semi-rentier" states or "rentier economies". They are politically more instable, but have an altogether authoritarian, oligarchical “clan-based” character. Uzbekistan with its closed economy, showing tendencies of economic autarchy, is also a potentially politically unstable clan-based regime. Thus, in the Central Asian context, the rentier state or rentier economy character affects the political stability of the actual regimes rather than having a direct impact on whether power is exercised in an autocratic or democratic way.

The nitrate to ammonia and ceramic (NAC) process for the denitration and immobilization of low-level radioactive liquid waste (LLW)

Hazardous radioactive liquid waste is the legacy of more than 50 years of plutonium production associated with the United States' nuclear weapons program. It is estimated that more than 245,000 tons of nitrate wastes are stored at facilities such as the single-shell tanks (SST) at the Hanford Site in the state of Washington, and the Melton Valley storage tanks at Oak Ridge National Laboratory (ORNL) in Tennessee. In order to develop an innovative, new technology for the destruction and immobilization of nitrate-based radioactive liquid waste, the United State Department of Energy (DOE) initiated the research project which resulted in the technology known as the Nitrate to Ammonia and Ceramic (NAC) process. However, inasmuch as the nitrate anion is highly mobile and difficult to immobilize, especially in relatively porous cement-based grout which has been used to date as a method for the immobilization of liquid waste, it presents a major obstacle to environmental clean-up initiatives. Thus, in an effort to contribute to the existing body of knowledge and enhance the efficacy of the NAC process, this research involved the experimental measurement of the rheological and heat transfer behaviors of the NAC product slurry and the determination of the optimal operating parameters for the continuous NAC chemical reaction process. Test results indicate that the NAC product slurry exhibits a typical non-Newtonian flow behavior. Correlation equations for the slurry's rheological properties and heat transfer rate in a pipe flow have been developed; these should prove valuable in the design of a full-scale NAC processing plant. The 20-percent slurry exhibited a typical dilatant (shear thickening) behavior and was in the turbulent flow regime due to its lower viscosity. The 40-percent slurry exhibited a typical pseudoplastic (shear thinning) behavior and remained in the laminar flow regime throughout its experimental range. The reactions were found to be more efficient in the lower temperature range investigated. With respect to leachability, the experimental final NAC ceramic waste form is comparable to the final product of vitrification, the technology chosen by DOE to treat these wastes. As the NAC process has the potential of reducing the volume of nitrate-based radioactive liquid waste by as much as 70 percent, it not only promises to enhance environmental remediation efforts but also effect substantial cost savings. ^

Aerodynamic load characteristics evaluation and tri-axial performance testing on fiber reinforced polymer connections and metal fasteners to promote hurricane damage mitigation

Damages during extreme wind events highlight the weaknesses of mechanical fasteners at the roof-to-wall connections in residential timber frame buildings. The allowable capacity of the metal fasteners is based on results of unidirectional component testing that do not simulate realistic tri-axial aerodynamic loading effects. The first objective of this research was to simulate hurricane effects and study hurricane-structure interaction at full-scale, facilitating better understanding of the combined impacts of wind, rain, and debris on inter-component connections at spatial and temporal scales. The second objective was to evaluate the performance of a non-intrusive roof-to-wall connection system using fiber reinforced polymer (FRP) materials and compare its load capacity to the capacity of an existing metal fastener under simulated aerodynamic loads. ^ The Wall of Wind (WoW) testing performed using FRP connections on a one-story gable-roof timber structure instrumented with a variety of sensors, was used to create a database on aerodynamic and aero-hydrodynamic loading on roof-to-wall connections tested under several parameters: angles of attack, wind-turbulence content, internal pressure conditions, with and without effects of rain. Based on the aerodynamic loading results obtained from WoW tests, sets of three force components (tri-axial mean loads) were combined into a series of resultant mean forces, which were used to test the FRP and metal connections in the structures laboratory up to failure. A new component testing system and test protocol were developed for testing fasteners under simulated triaxial loading as opposed to uni-axial loading. The tri-axial and uni-axial test results were compared for hurricane clips. Also, comparison was made between tri-axial load capacity of FRP and metal connections. ^ The research findings demonstrate that the FRP connection is a viable option for use in timber roof-to-wall connection system. Findings also confirm that current testing methods of mechanical fasteners tend to overestimate the actual load capacities of a connector. Additionally, the research also contributes to the development a new testing protocol for fasteners using tri-axial simultaneous loads based on the aerodynamic database obtained from the WoW testing. ^

Effects of architectural features of air-permeable roof cladding materials on wind-induced uplift loading

Widespread damage to roofing materials (such as tiles and shingles) for low-rise buildings, even for weaker hurricanes, has raised concerns regarding design load provisions and construction practices. Currently the building codes used for designing low-rise building roofs are mainly based on testing results from building models which generally do not simulate the architectural features of roofing materials that may significantly influence the wind-induced pressures. Full-scale experimentation was conducted under high winds to investigate the effects of architectural details of high profile roof tiles and asphalt shingles on net pressures that are often responsible for damage to these roofing materials. Effects on the vulnerability of roofing materials were also studied. Different roof models with bare, tiled, and shingled roof decks were tested. Pressures acting on both top and bottom surfaces of the roofing materials were measured to understand their effects on the net uplift loading. The area-averaged peak pressure coefficients obtained from bare, tiled, and shingled roof decks were compared. In addition, a set of wind tunnel tests on a tiled roof deck model were conducted to verify the effects of tiles' cavity internal pressure. Both the full-scale and the wind tunnel test results showed that underside pressure of a roof tile could either aggravate or alleviate wind uplift on the tile based on its orientation on the roof with respect to the wind angle of attack. For shingles, the underside pressure could aggravate wind uplift if the shingle is located near the center of the roof deck. Bare deck modeling to estimate design wind uplift on shingled decks may be acceptable for most locations but not for field locations; it could underestimate the uplift on shingles by 30-60%. In addition, some initial quantification of the effects of roofing materials on wind uplift was performed by studying the wind uplift load ratio for tiled versus bare deck and shingled versus bare deck. Vulnerability curves, with and without considering the effects of tiles' cavity internal pressure, showed significant differences. Aerodynamic load provisions for low-rise buildings' roofs and their vulnerability can thus be more accurately evaluated by considering the effects of the roofing materials.

Front-of-the-House Computer Systems: A User's Guide

In a previous issue, DL Alan J. Parker presented a case for the smart utilization of microcomputers in the hospitality industry. But what should hotel managers of today look for when utilizing a full scale hotel computer system? This article attempts to aid the hotelier in compiling a series of functions which management should expect from any system chosen

Relationships between gifted selection criteria and performance in sixth -grade gifted science

This study examined the relationships between gifted selection criteria used in the Dade County Public Schools of Miami, Florida and performance in sixth grade gifted science classes.^ The goal of the study was to identify significant predictors of performance in sixth grade gifted science classes. Group comparisons of performance were also made. Performance in sixth grade gifted science was defined as the numeric average of nine weeks' grades earned in sixth grade gifted science classes.^ The sample consisted of 100 subjects who were formerly enrolled in sixth grade gifted science classes over two years at a large, multiethnic public middle school in Dade County.^ The predictors analyzed were I.Q. score (all scales combined), full scale I.Q. score, verbal scale I.Q. score, performance scale I.Q. score, combined Stanford Achievement Test (SAT) score (Reading Comprehension plus Math Applications), SAT Reading Comprehension score, and SAT Math Applications score. Combined SAT score and SAT Math Applications score were significantly positively correlated to performance in sixth grade gifted science. Performance scale I.Q. score was significantly negatively correlated to performance in sixth grade gifted science. The other predictors examined were not significantly correlated to performance.^ Group comparison results showed the mean average of nine weeks grades for the full scale I.Q. group was greater than the verbal and performance scale I.Q. groups. Females outperformed males to a highly significant level. Mean g.p.a. for ethnic groups was greatest for Asian students, followed by white non-Hispanic, Hispanic, and black. Students not receiving a lunch subsidy outperformed those receiving subsidies.^ Comparisons of performance based on gifted qualification plan showed the mean g.p.a. for traditional plan and Plan B groups were not different. Mean g.p.a. for students who qualified for gifted using automatic Math Applications criteria was highest, followed by automatic Reading Comprehension criteria and Plan B Matrix score. Both automatic qualification groups outperformed the traditional group. The traditional group outperformed the Plan B Matrix group. No significant differences in mean g.p.a. between the Plan B subgroups and the traditional plan group were found. ^

Developing an enhanced model for combined heat and air infiltration energy simulation

The need for efficient, sustainable, and planned utilization of resources is ever more critical. In the U.S. alone, buildings consume 34.8 Quadrillion (1015) BTU of energy annually at a cost of $1.4 Trillion. Of this energy 58% is utilized for heating and air conditioning. ^ Several building energy analysis tools have been developed to assess energy demands and lifecycle energy costs in buildings. Such analyses are also essential for an efficient HVAC design that overcomes the pitfalls of an under/over-designed system. DOE-2 is among the most widely known full building energy analysis models. It also constitutes the simulation engine of other prominent software such as eQUEST, EnergyPro, PowerDOE. Therefore, it is essential that DOE-2 energy simulations be characterized by high accuracy. ^ Infiltration is an uncontrolled process through which outside air leaks into a building. Studies have estimated infiltration to account for up to 50% of a building's energy demand. This, considered alongside the annual cost of buildings energy consumption, reveals the costs of air infiltration. It also stresses the need that prominent building energy simulation engines accurately account for its impact. ^ In this research the relative accuracy of current air infiltration calculation methods is evaluated against an intricate Multiphysics Hygrothermal CFD building envelope analysis. The full-scale CFD analysis is based on a meticulous representation of cracking in building envelopes and on real-life conditions. The research found that even the most advanced current infiltration methods, including in DOE-2, are at up to 96.13% relative error versus CFD analysis. ^ An Enhanced Model for Combined Heat and Air Infiltration Simulation was developed. The model resulted in 91.6% improvement in relative accuracy over current models. It reduces error versus CFD analysis to less than 4.5% while requiring less than 1% of the time required for such a complex hygrothermal analysis. The algorithm used in our model was demonstrated to be easy to integrate into DOE-2 and other engines as a standalone method for evaluating infiltration heat loads. This will vastly increase the accuracy of such simulation engines while maintaining their speed and ease of use characteristics that make them very widely used in building design.^

Experimental and Analytical Methodologies for Predicting Peak Loads on Building Envelopes and Roofing Systems

The performance of building envelopes and roofing systems significantly depends on accurate knowledge of wind loads and the response of envelope components under realistic wind conditions. Wind tunnel testing is a well-established practice to determine wind loads on structures. For small structures much larger model scales are needed than for large structures, to maintain modeling accuracy and minimize Reynolds number effects. In these circumstances the ability to obtain a large enough turbulence integral scale is usually compromised by the limited dimensions of the wind tunnel meaning that it is not possible to simulate the low frequency end of the turbulence spectrum. Such flows are called flows with Partial Turbulence Simulation. In this dissertation, the test procedure and scaling requirements for tests in partial turbulence simulation are discussed. A theoretical method is proposed for including the effects of low-frequency turbulences in the post-test analysis. In this theory the turbulence spectrum is divided into two distinct statistical processes, one at high frequencies which can be simulated in the wind tunnel, and one at low frequencies which can be treated in a quasi-steady manner. The joint probability of load resulting from the two processes is derived from which full-scale equivalent peak pressure coefficients can be obtained. The efficacy of the method is proved by comparing predicted data derived from tests on large-scale models of the Silsoe Cube and Texas-Tech University buildings in Wall of Wind facility at Florida International University with the available full-scale data. For multi-layer building envelopes such as rain-screen walls, roof pavers, and vented energy efficient walls not only peak wind loads but also their spatial gradients are important. Wind permeable roof claddings like roof pavers are not well dealt with in many existing building codes and standards. Large-scale experiments were carried out to investigate the wind loading on concrete pavers including wind blow-off tests and pressure measurements. Simplified guidelines were developed for design of loose-laid roof pavers against wind uplift. The guidelines are formatted so that use can be made of the existing information in codes and standards such as ASCE 7-10 on pressure coefficients on components and cladding.

Aerodynamic Load Characteristics Evaluation and Tri-Axial Performance Testing on Fiber Reinforced Polymer Connections and Metal Fasteners to Promote Hurricane Damage Mitigation

Damages during extreme wind events highlight the weaknesses of mechanical fasteners at the roof-to-wall connections in residential timber frame buildings. The allowable capacity of the metal fasteners is based on results of unidirectional component testing that do not simulate realistic tri-axial aerodynamic loading effects. The first objective of this research was to simulate hurricane effects and study hurricane-structure interaction at full-scale, facilitating better understanding of the combined impacts of wind, rain, and debris on inter-component connections at spatial and temporal scales. The second objective was to evaluate the performance of a non-intrusive roof-to-wall connection system using fiber reinforced polymer (FRP) materials and compare its load capacity to the capacity of an existing metal fastener under simulated aerodynamic loads. The Wall of Wind (WoW) testing performed using FRP connections on a one-story gable-roof timber structure instrumented with a variety of sensors, was used to create a database on aerodynamic and aero-hydrodynamic loading on roof-to-wall connections tested under several parameters: angles of attack, wind-turbulence content, internal pressure conditions, with and without effects of rain. Based on the aerodynamic loading results obtained from WoW tests, sets of three force components (tri-axial mean loads) were combined into a series of resultant mean forces, which were used to test the FRP and metal connections in the structures laboratory up to failure. A new component testing system and test protocol were developed for testing fasteners under simulated tri-axial loading as opposed to uni-axial loading. The tri-axial and uni-axial test results were compared for hurricane clips. Also, comparison was made between tri-axial load capacity of FRP and metal connections. The research findings demonstrate that the FRP connection is a viable option for use in timber roof-to-wall connection system. Findings also confirm that current testing methods of mechanical fasteners tend to overestimate the actual load capacities of a connector. Additionally, the research also contributes to the development a new testing protocol for fasteners using tri-axial simultaneous loads based on the aerodynamic database obtained from the WoW testing.

An investigation of twentieth century observant Jewish fine artists

People of the Jewish faith base their belief on the written word of the Torah. Presented in this paper are fine artists that produce work within these laws. The Torah sets guidelines for life and morality. The belief system within this domain is that visual images have an impact on the viewers, and artists are accountable for what they produce. This is in opposition with art education, where freedom of expression takes precedence over morality. The results of this study will form the basis for a curriculum for the community college. The researcher's area of inquiry is directed to painting and sculpture made by artists of the Jewish faith who follow the Torah, meaning those who are observant of their faith and practices. Their skills and perceptions will be presented to educate the viewer about their visions. The research questions were posed to rabbinical authorities and artists in order to establish a clear and defined statement of what the Jewish law is regarding the fine arts. The evidence presented was obtained by questionnaires, personal interviews, articles, and opinions from Jewish scholars. Four rabbis were selected based on their erudition on Torah law, and their strong leadership positions in Jewish educational institutions. The ten artists were selected based on recommendations from art historians, and art and gallery directors. The artists and the rabbis were mailed questionnaires, which was followed by an interview. The conclusion from this study is that fine artists are encouraged to use their talents, this is supported by the Torah text, and rabbinic explanation. The restriction for the Jewish artist is in making a replication of a realistic full-scale figure, making a visual rendition of G-d, a nude, or violent image. Art is made by the observant Jew with the intention of enhancing the world with visions inspired by their belief in the Torah. A crucial belief in Judaism is that there is but one G-d, and all man-made images should reflect the majesty of G-d's creations.

Influência da estratigrafia mecânica no desenvolvimento de falhas distensionais em bacias do tipo Rifte: contribuição da modelagem física

In the last decades, analogue modelling has been used in geology to improve the knowledge of how geological structures are nucleated, how they grow and what are the main important points in such processes. The use of this tool in the oil industry, to help seismic interpretations and mainly to search for structural traps contributed to disseminate the use of this tool in the literature. Nowadays, physical modelling has a large field of applications, since landslide to granite emplacement along shear zones. In this work, we deal with physical modelling to study the influence of mechanical stratifications in the nucleation and development of faults and fractures in a context of orthogonal and conjugated oblique basins. To simulate a mechanical stratigraphy we used different materials, with distinct physical proprieties, such as gypsum powder, glass beads, dry clay and quartz sand. Some experiments were run along with a PIV (Particle Image Velocimetry), an instrument that shows the movement of the particles to each deformation moment. Two series of experiments were studied: i) Series MO: We tested the development of normal faults in a context of an orthogonal (to the extension direction) basin. Experiments were run taking into account the change of materials and strata thickness. Some experiments were done with sintectonic sedimentation. We registered differences in the nucleation and growth of faults in layers with different rheological behavior. The gypsum powder layer behaves in a more competent mode, which generates a great number of high angle fractures. These fractures evolve to faults that exhibit a higher dip than when they cross less competent layers, like the one of quartz sand. This competent layer exhibits faulted blocks arranged in a typical domino-style. Cataclastic breccias developed along the faults affecting the competent layers and showed different evolutional history, depending on the deforming stratigraphic sequence; ii) Series MOS2: Normal faults were analyzed in conjugated sub-basins (oblique to the extension direction) developed in a sequence with and without rheological contrast. In experiments with rheological contrast, two important grabens developed along the faulted margins differing from the subbasins with mechanical stratigraphy. Both experiments developed oblique fault systems and, in the area of sub-basins intersection, faults traces became very curved.

Estudo da redução de arrasto induzido por polímeros em escoamentos internos turbulentos em dutos

The flows turbulent and laminar are present in various applications of engineering and one of the villain of energy loss big is the surface friction. Currently, there are several research aimed for the study of reducing drag (DR) with the objective of developing effective methods to reduce the friction. Regardless of numerous research carried out until today, the phenomenon DR still remains in study not it is fully understood. This paper studied the drag reduction by polymer induction in turbulent internal flows in ducts. We constructed a testing bench to perform the analysis of drag reduction, the bench has basically two manometers with a 8.5 psi full scale, a peripheral pump 0.5 HP, an acrylic tank, valves and tubes pvc and is situated in the Laboratory Fluid Mechanics UFRN. Were used as polymer additives to polyethylene glycol 4000, the Polyox WSR N60K, Polyox WSR 301 and Polyox WSR 205. The rationale for the choice of these polymers is their wide application in situations requiring greater energy efficiency, such as the addition reducing polymers for the jet used by the fire department to achieve greater distances. The induced drag reduction polymers is investigated from the turbulent flow analysis, with Reynolds number in a range between 2×104

Estudo da redução de arrasto induzido por polímeros em escoamentos internos turbulentos em dutos

The flows turbulent and laminar are present in various applications of engineering and one of the villain of energy loss big is the surface friction. Currently, there are several research aimed for the study of reducing drag (DR) with the objective of developing effective methods to reduce the friction. Regardless of numerous research carried out until today, the phenomenon DR still remains in study not it is fully understood. This paper studied the drag reduction by polymer induction in turbulent internal flows in ducts. We constructed a testing bench to perform the analysis of drag reduction, the bench has basically two manometers with a 8.5 psi full scale, a peripheral pump 0.5 HP, an acrylic tank, valves and tubes pvc and is situated in the Laboratory Fluid Mechanics UFRN. Were used as polymer additives to polyethylene glycol 4000, the Polyox WSR N60K, Polyox WSR 301 and Polyox WSR 205. The rationale for the choice of these polymers is their wide application in situations requiring greater energy efficiency, such as the addition reducing polymers for the jet used by the fire department to achieve greater distances. The induced drag reduction polymers is investigated from the turbulent flow analysis, with Reynolds number in a range between 2×104