De la formation en general et en particulier de celle de l'homme /

Mode of access: Internet.

A chapter on Fresnel's theory of double refraction,

Author's presentation copy.

Cost-exergy optimisation of linear Fresnel reflectors

This paper presents a new method for the optimisation of the mirror element spacing arrangement and operating temperature of linear Fresnel reflectors (LFR). The specific objective is to maximise available power output (i.e. exergy) and operational hours whilst minimising cost. The method is described in detail and compared to an existing design method prominent in the literature. Results are given in terms of the exergy per total mirror area (W/m2) and cost per exergy (US $/W). The new method is applied principally to the optimisation of an LFR in Gujarat, India, for which cost data have been gathered. It is recommended to use a spacing arrangement such that the onset of shadowing among mirror elements occurs at a transversal angle of 45°. This results in a cost per exergy of 2.3 $/W. Compared to the existing design approach, the exergy averaged over the year is increased by 9% to 50 W/m2 and an additional 122 h of operation per year are predicted. The ideal operating temperature at the surface of the absorber tubes is found to be 300 °C. It is concluded that the new method is an improvement over existing techniques and a significant tool for any future design work on LFR systems

An Algorithm for Fresnel Diffraction Computing Based on Fractional Fourier Transform

The fractional Fourier transform (FrFT) is used for the solution of the diffraction integral in optics. A scanning approach is proposed for finding the optimal FrFT order. In this way, the process of diffraction computing is speeded up. The basic algorithm and the intermediate results at each stage are demonstrated.

Dual-parameters sensing based on multimode microfiber with Fresnel reflection

A compact and low cost fiber sensor based on microfiber with Fresnel reflection is proposed and demonstrated for simultaneous measurement of refractive index (RI) and temperature with high sensitivities. © OSA 2015.

Linear Fresnel mirror solar concentrator with tracking

Solar energy is the most abundant, widely distributed and clean renewable energy resource. Since the insolation intensity is only in the range of 0.5 - 1.0 kW/m2, solar concentrators are required for attaining temperatures appropriate for medium and high temperature applications. The concentrated energy is transferred through an absorber to a thermal fluid such as air, water or other fluids for various uses. This paper describes design and development of a 'Linear Fresnel Mirror Solar Concentrator' (LFMSC) using long thin strips of mirrors to focus sunlight on to a fixed receiver located at a common focal line. Our LFMSC system comprises a reflector (concentrator), receiver (target) and an innovative solar tracking mechanism. Reflectors are mirror strips, mounted on tubes which are fixed to a base frame. The tubes can be rotated to align the strips to focus solar radiation on the receiver (target). The latter comprises a coated tube carrying water and covered by a glass plate. This is mounted at an elevation of few meters above the horizontal, parallel to the plane of the mirrors. The reflector is oriented along north-south axis. The most difficult task is tracking. This is achieved by single axis tracking using a four bar link mechanism. Thus tracking has been made simple and easy to operate. The LFMSC setup is used for generating steam for a variety of applications. © 2013 The Authors. Published by Elsevier Ltd.

Construction and experimental study of an elevation linear Fresnel reflector

This paper outlines a novel elevation linear Fresnel reflector (ELFR) and presents and validates theoretical models defining its thermal performance. To validate the models, a series of experiments were carried out for receiver temperatures in the range of 30-100 °C to measure the heat loss coefficient, gain in heat transfer fluid (HTF) temperature, thermal efficiency, and stagnation temperature. The heat loss coefficient was underestimated due to the model exclusion of collector end heat losses. The measured HTF temperature gains were found to have a good correlation to the model predictions - less than a 5% difference. In comparison to model predictions for the thermal efficiency and stagnation temperature, measured values had a difference of -39% to +31% and 22-38%, respectively. The difference between the measured and predicted values was attributed to the low-temperature region for the experiments. It was concluded that the theoretical models are suitable for examining linear Fresnel reflector (LFR) systems and can be adopted by other researchers.

Optimized square Fresnel zone plates for microoptics applications

Polygonal Fresnel zone plates with a low number of sides have deserved attention in micro and nanoptics, because they can be straightforwardly integrated in photonic devices, and, at the same time, they represent a balance between the high-focusing performance of a circular zone plate and the easiness of fabrication at micro and nano-scales of polygons. Among them, the most representative family are Square Fresnel Zone Plates (SFZP). In this work, we propose two different customized designs of SFZP for optical wavelengths. Both designs are based on the optimization of a SFZP to perform as close as possible as a usual Fresnel Zone Plate. In the first case, the criterion followed to compute it is the minimization of the difference between the area covered by the angular sector of the zone of the corresponding circular plate and the one covered by the polygon traced on the former. Such a requirement leads to a customized polygon-like Fresnel zone. The simplest one is a square zone with a pattern of phases repeating each five zones. On the other hand, an alternative SFZP can be designed guided by the same criterion but with a new restriction. In this case, the distance between the borders of different zones remains unaltered. A comparison between the two lenses is carried out. The irradiance at focus is computed for both and suitable merit figures are defined to account for the difference between them.

Optimal phase distributions for polygonal Fresnel lenses

Polygonal Fresnel zone plates can be configured in a variety of forms depending on the number of sides of the polygon and the number of phase steps used. This contribution deals with some specific polygonal designs that tessellate the plane: triangles, squares, and hexagons. The phase distribution is chosen as a continuous one to form a polygonal kinoform. The selected designs have been simulated and its behaviour compared. Although their performance is worse than the circular Fresnel plate, they may present some other advantages as the tessellation capability, and the possibility to fabricate them as extruded profiles.

Multimode microfiber interferometer for dual-parameters sensing assisted by Fresnel reflection

A compact and low cost fiber sensor based on single multimode microfiber with Fresnel reflection is proposed and demonstrated for simultaneous measurement of refractive index and temperature. The sensor is fabricated with two simple steps including fiber tapering and then fiber endface cleaving. The reflection spectrum is an intensity modulated interference spectrum, as the tapered fiber generates interference pattern and the cleaved endface provides intensity modulation. By demodulating the fringe power and free spectrum range (FSR) of the spectrum, RI sensitivities of -72.247dB/RIU and 68.122nm/RIU, as well as temperature sensitivities of 0.0283dB/degrees C and -17pm/degrees C are obtained. Further, the sensing scheme could also provide the feasibility to construct a more compact sensing probe for dual-paramters measurement, which has great potential in bio/chemical detection.

Sintesi di oligotiofeni “push-pull” per applicazioni in celle solari di tipo bulkheterojunction (BHJ)

Sintesi e caratterizzazione di cinque eptameri "push-pull" a base tiofenica con sequenza D-A-D-A-D-A-D e D-D-D-A-D-D-D per applicazioni in celle solari di tipo bulkheterojunction (BHJ).

Sintesi, caratterizzazione e nano-strutturazione di politiofeni e loro applicazione in celle solari

Negli ultimi decenni i polimeri coniugati, grazie alla loro peculiarità di essere dei semiconduttori organici, hanno attirato l’attenzione della ricerca scientifica, e tra questi composti rientrano i politiofeni. Versatilità, robustezza chimica strutturale e fluorescenza sono alcune delle proprietà che caratterizzano tali composti e che hanno permesso di esplorare nuovi materiali da un punto di vista scientifico e tecnologico. Recentemente molto interessanti sono risultate essere le nanoparticelle politiofeniche poiché permettono di modulare le proprietà chimico-fisiche dei relativi polimeri, ampliandone le potenzialità a trovare applicazione in molteplici dispositivi elettronici, tra cui le celle solari (CS) organiche. Infatti, molto attivo è l’interesse della comunità scientifica per ottimizzare questi dispositivi ricercando nuovi prodotti che soddisfino diversi requisiti, come riduzione dell’impatto ambientale, la facilità di preparazione e compatibilità con substrati flessibili. In tale contesto, uno degli obiettivi della ricerca attualmente si focalizza sulla preparazione di nuovi accettori da usare in CS organiche alternativi ai derivati fullerenici, i quali presentano diversi svantaggi. Alla luce dei più recenti risultati si è visto che i politiofeni push-pull, caratterizzati dall’alternanza di gruppi accettori (A) e gruppi donatori (D), hanno una notevole potenzialità a rimpiazzare tali materiali e ad essere usati come accettori non-fullerenici. Infatti, questi hanno permesso di ottenere buoni risultati in termini di conversioni ed efficienze delle celle fotovoltaiche. Lo scopo di questo lavoro di tesi è sintetizzare sei nuovi polimeri a base tiofenica (quattro con sequenza A-D e due con sequenza A-A) per studiarne le possibili applicazioni come materiali accettori non-fullerenici e la loro organizzazione in strutture ordinate di nanoparticelle.

Sistemi di testing per celle a combustibile

La tesi tratta funzionamento, ottimizzazione e applicazioni delle celle a combustibile PEM (PEM Fuel cells) che sono dispositivi capaci di convertire reversibilmente l’energia chimica contenuta nel combustibile in energia elettrica, energia termica e prodotti di reazione. Vengono analizzati gli effetti di temperatura, pressione e umidità sulla cinetica, sulle prestazioni, sull’OCV, sulla conduttività della membrana e sul trasferimento di massa. In generale, per utilizzare una cella a combustibile PEM, ogni componente, materiale e l'assemblaggio delle celle dovrebbe essere realizzabile e ottimizzato per ottenere alte prestazioni. Vengono, quindi, trattate le tecniche di test e diagnosi che rappresentano il modo più popolare e affidabile per convalidare i progetti di questi componenti e della cella combustibile stessa. Inoltre, si affronta il discorso sull’idrogeno definito come vettore di energia che ha assunto un ruolo di primo piano per un mercato a basse emissioni; infatti ha un grande potenziale come combustibile alternativo e assume un ruolo centrale nello scenario energetico del futuro. Infine, si parla anche di applicazioni pratiche ed esistenti riguardanti le celle a combustibile in veicoli, come le proposte di Nuvera ed EH Group.

Piaget segundo seus próprios argumentos

Neste artigo tivemos a intenção de oferecer ao leitor o resumo de um dos aspectos mais importantes da análise estrutural que realizamos, durante décadas, do texto de Jean Piaget, sobretudo as estreitas relações entre a Biologia e a Lógica na construção e na explicação do conhecimento científico. Nesse sentido, procuramos demonstrar que, a partir dos conceitos de implicação significante e de imagem mental criados por Piaget, um novo campo de investigações se abre, a saber, aquele que denominamos como o dos sistemas de significação não lógica, campo de suma relevância e que vem preencher uma secular lacuna entre a razão e a emoção até hoje presente nas pesquisas sobre os fenômenos normais e patológicos do psiquismo.

Sublimação e pulsão de morte: a desfusão pulsional

Com o advento do segundo dualismo pulsional freudiano, surge uma série de mudanças no entendimento da sublimação. Essa passa a se apresentar como a causa por excelência da desfusão das pulsões, o que nos leva a um paradoxo: ao mesmo tempo em que a sublimação é a base da cultura, ela é também causa da destrutividade no seio dessa mesma cultura. A pulsão de morte resultante da desfusão das pulsões, por sua vez, teria consequências tanto em cada indivíduo quanto na cultura como um todo, tal como o que se observa em relação ao primado da imagem na sociedade contemporânea. Este artigo busca discutir alguns dos efeitos da pulsão de morte desfusionada, entendida como resultado da sublimação, principalmente no que tange à sublimação implicada na criação literária.