The costs and controls of flowering and fruiting in {\it Spondias purpurea\/}

Small potted trees of Spondias purpurea were monitored to determine the costs and controls of flowering and fruiting. The effect of photoperiod, extremes in moisture and temperature, and defoliation were examined. The carbon exchange rates of the leaves, shoots and fruits were determined. Light response curves and diurnal levels were also investigated. $\sp{13}$Carbon labeling was used to determine which plant parts are carbon sinks. Photoperiod induces dormancy and bud activity. Extremes in soil moisture and temperature induce leaf fall. Flowers, fruits, and roots are carbon sinks. The results were used to develop a phenological model with latitude, soil moisture, and air temperature as variables. ^

Inspection of parts with complex geometry and welds with structural health monitoring techniques

Structural Health Monitoring (SHM) systems were developed to evaluate the integrity of a system during operation, and to quickly identify the maintenance problems. They will be used in future aerospace vehicles to improve safety, reduce cost and minimize the maintenance time of a system. Many SHM systems were already developed to evaluate the integrity of plates and used in marine structures. Their implementation in manufacturing processes is still expected. The application of SHM methods for complex geometries and welds are two important challenges in this area of research. This research work started by studying the characteristics of piezoelectric actuators, and a small energy harvester was designed. The output voltages at different frequencies of vibration were acquired to determine the nonlinear characteristics of the piezoelectric stripe actuators. The frequency response was evaluated experimentally. AA battery size energy harvesting devices were developed by using these actuators. When the round and square cross section devices were excited at 50 Hz frequency, they generated 16 V and 25 V respectively. The Surface Response to Excitation (SuRE) and Lamb wave methods were used to estimate the condition of parts with complex geometries. Cutting tools and welded plates were considered. Both approaches used piezoelectric elements that were attached to the surfaces of considered parts. The variation of the magnitude of the frequency response was evaluated when the SuRE method was used. The sum of the square of the differences was calculated. The envelope of the received signal was used for the analysis of wave propagation. Bi-orthogonal wavelet (Binlet) analysis was also used for the evaluation of the data obtained during Lamb wave technique. Both the Lamb wave and SuRE approaches along with the three methods for data analysis worked effectively to detect increasing tool wear. Similarly, they detected defects on the plate, on the weld, and on a separate plate without any sensor as long as it was welded to the test plate.

Design, fabrication, and evaluation of on-chip micro-supercapacitors

Due to the increasing demand for high power and reliable miniaturized energy storage devices, the development of micro-supercapacitors or electrochemical micro-capacitors have attracted much attention in recent years. This dissertation investigates several strategies to develop on-chip micro-supercapacitors with high power and energy density. Micro-supercapacitors based on interdigitated carbon micro-electrode arrays are fabricated through carbon microelectromechanical systems (C-MEMS) technique which is based on carbonization of patterned photoresist. To improve the capacitive behavior, electrochemical activation is performed on carbon micro-electrode arrays. The developed micro-supercapacitors show specific capacitances as high as 75 mFcm-2 at a scan rate of 5 mVs -1 after electrochemical activation for 30 minutes. The capacitance loss is less than 13% after 1000 cyclic voltammetry (CV) cycles. These results indicate that electrochemically activated C-MEMS micro-electrode arrays are promising candidates for on-chip electrochemical micro-capacitor applications. The energy density of micro-supercapacitors was further improved by conformal coating of polypyrrole (PPy) on C-MEMS structures. In these types of micro-devices the three dimensional (3D) carbon microstructures serve as current collectors for high energy density PPy electrodes. The electrochemical characterizations of these micro-supercapacitors show that they can deliver a specific capacitance of about 162.07 mFcm-2 and a specific power of 1.62mWcm -2 at a 20 mVs-1 scan rate. Addressing the need for high power micro-supercapacitors, the application of graphene as electrode materials for micro-supercapacitor was also investigated. The present study suggests a novel method to fabricate graphene-based micro-supercapacitors with thin film or in-plane interdigital electrodes. The fabricated micro-supercapacitors show exceptional frequency response and power handling performance and could effectively charge and discharge at rates as high as 50 Vs-1. CV measurements show that the specific capacitance of the micro-supercapacitor based on reduced graphene oxide and carbon nanotube composites is 6.1 mFcm -2 at scan rate of 0.01Vs-1. At a very high scan rate of 50 Vs-1, a specific capacitance of 2.8 mFcm-2 (stack capacitance of 3.1 Fcm-3) is recorded. This unprecedented performance can potentially broaden the future applications of micro-supercapacitors.

Isotope measurements from ODP Hole 104-642B

The Pliocene (5.3-2.6 Ma) is often described as a relatively stable climatic period, with warm temperatures characterizing high latitudes. New suborbital resolved stable isotope records from ODP Hole 642B in the Eastern Nordic Seas document that the Pliocene was not a stable period characterized by one climate. Rather, seven distinct climate phases, each lasting between 150,000 and 400,000 years, are identified and characterized in the time interval 5.1-3.1 Ma. Four of the transitions between the defined climate phases occurred close to an eccentricity minimum and a minimum in amplitude of change for Northern Hemisphere summer insolation, while two occurred around an eccentricity maximum and a maximum in amplitude in insolation change. Hence, a low frequency response of the Nordic Seas to insolation forcing is indicated. In addition, paleogeographic and related paleoceanographic changes, expansion of the Arctic sea ice cover and onset of NHG were important factors behind the evolving Pliocene low frequency variability in the eastern Nordic Seas. It is likely that the identified climate phases and transitions are important beyond the Nordic Seas, due to their association with changes to both insolation and paleogeography. Also, a strong and variable degree of diagenetic calcite overgrowth is documented for the planktic foraminifera, especially influencing the planktic d18O results; the absolute values and amplitude of change cannot be taken at face value.

Análise wavelet em curvas de luz estelares de sistemas binários da missão espacial CoRoT

Binary systems are key environments to study the fundamental properties of stars. In this work, we analyze 99 binary systems identified by the CoRoT space mission. From the study of the phase diagrams of these systems, our sample is divided into three groups: those whose systems are characterized by the variability relative to the binary eclipses; those presenting strong modulations probably due to the presence of stellar spots on the surface of star; and those whose systems have variability associated with the expansion and contraction of the surface layers. For eclipsing binary stars, phase diagrams are used to estimate the classification in regard to their morphology, based on the study of equipotential surfaces. In this context, to determine the rotation period, and to identify the presence of active regions, and to investigate if the star exhibits or not differential rotation and study stellar pulsation, we apply the wavelet procedure. The wavelet transform has been used as a powerful tool in the treatment of a large number of problems in astrophysics. Through the wavelet transform, one can perform an analysis in time-frequency light curves rich in details that contribute significantly to the study of phenomena associated with the rotation, the magnetic activity and stellar pulsations. In this work, we apply Morlet wavelet (6th order), which offers high time and frequency resolution and obtain local (energy distribution of the signal) and global (time integration of local map) wavelet power spectra. Using the wavelet analysis, we identify thirteen systems with periodicities related to the rotational modulation, besides the beating pattern signature in the local wavelet map of five pulsating stars over the entire time span.

Análise wavelet em curvas de luz estelares de sistemas binários da missão espacial CoRoT

Binary systems are key environments to study the fundamental properties of stars. In this work, we analyze 99 binary systems identified by the CoRoT space mission. From the study of the phase diagrams of these systems, our sample is divided into three groups: those whose systems are characterized by the variability relative to the binary eclipses; those presenting strong modulations probably due to the presence of stellar spots on the surface of star; and those whose systems have variability associated with the expansion and contraction of the surface layers. For eclipsing binary stars, phase diagrams are used to estimate the classification in regard to their morphology, based on the study of equipotential surfaces. In this context, to determine the rotation period, and to identify the presence of active regions, and to investigate if the star exhibits or not differential rotation and study stellar pulsation, we apply the wavelet procedure. The wavelet transform has been used as a powerful tool in the treatment of a large number of problems in astrophysics. Through the wavelet transform, one can perform an analysis in time-frequency light curves rich in details that contribute significantly to the study of phenomena associated with the rotation, the magnetic activity and stellar pulsations. In this work, we apply Morlet wavelet (6th order), which offers high time and frequency resolution and obtain local (energy distribution of the signal) and global (time integration of local map) wavelet power spectra. Using the wavelet analysis, we identify thirteen systems with periodicities related to the rotational modulation, besides the beating pattern signature in the local wavelet map of five pulsating stars over the entire time span.

Método híbrido para projeto de superfícies seletivas em frequência

This thesis presents a hybrid technique of frequency selective surfaces project (FSS) on a isotropic dielectric layer, considering various geometries for the elements of the unit cell. Specifically, the hybrid technique uses the equivalent circuit method in conjunction with genetic algorithm, aiming at the synthesis of structures with response single-band and dual-band. The equivalent circuit method allows you to model the structure by using an equivalent circuit and also obtaining circuits for different geometries. From the obtaining of the parameters of these circuits, you can get the transmission and reflection characteristics of patterned structures. For the optimization of patterned structures, according to the desired frequency response, Matlab™ optimization tool named optimtool proved to be easy to use, allowing you to explore important results on the optimization analysis. In this thesis, numeric and experimental results are presented for the different characteristics of the analyzed geometries. For this, it was determined a technique to obtain the parameter N, which is based on genetic algorithms and differential geometry, to obtain the algebraic rational models that determine values of N more accurate, facilitating new projects of FSS with these geometries. The optimal results of N are grouped according to the occupancy factor of the cell and the thickness of the dielectric, for modeling of the structures by means of rational algebraic equations. Furthermore, for the proposed hybrid model was developed a fitness function for the purpose of calculating the error occurred in the definitions of FSS bandwidths with transmission features single band and dual band. This thesis deals with the construction of prototypes of FSS with frequency settings and band widths obtained with the use of this function. The FSS were initially reviewed through simulations performed with the commercial software Ansoft Designer ™, followed by simulation with the equivalent circuit method for obtaining a value of N in order to converge the resonance frequency and the bandwidth of the FSS analyzed, then the results obtained were compared. The methodology applied is validated with the construction and measurement of prototypes with different geometries of the cells of the arrays of FSS.

Método híbrido para projeto de superfícies seletivas em frequência

This thesis presents a hybrid technique of frequency selective surfaces project (FSS) on a isotropic dielectric layer, considering various geometries for the elements of the unit cell. Specifically, the hybrid technique uses the equivalent circuit method in conjunction with genetic algorithm, aiming at the synthesis of structures with response single-band and dual-band. The equivalent circuit method allows you to model the structure by using an equivalent circuit and also obtaining circuits for different geometries. From the obtaining of the parameters of these circuits, you can get the transmission and reflection characteristics of patterned structures. For the optimization of patterned structures, according to the desired frequency response, Matlab™ optimization tool named optimtool proved to be easy to use, allowing you to explore important results on the optimization analysis. In this thesis, numeric and experimental results are presented for the different characteristics of the analyzed geometries. For this, it was determined a technique to obtain the parameter N, which is based on genetic algorithms and differential geometry, to obtain the algebraic rational models that determine values of N more accurate, facilitating new projects of FSS with these geometries. The optimal results of N are grouped according to the occupancy factor of the cell and the thickness of the dielectric, for modeling of the structures by means of rational algebraic equations. Furthermore, for the proposed hybrid model was developed a fitness function for the purpose of calculating the error occurred in the definitions of FSS bandwidths with transmission features single band and dual band. This thesis deals with the construction of prototypes of FSS with frequency settings and band widths obtained with the use of this function. The FSS were initially reviewed through simulations performed with the commercial software Ansoft Designer ™, followed by simulation with the equivalent circuit method for obtaining a value of N in order to converge the resonance frequency and the bandwidth of the FSS analyzed, then the results obtained were compared. The methodology applied is validated with the construction and measurement of prototypes with different geometries of the cells of the arrays of FSS.

The role of supraspinal excitability in the development of healthy-limb deficits following anterior cruciate ligament injury

In the current study, we examined how supraspinal and spinal excitability were altered bilaterally after unilateral anterior cruciate ligament reconstruction (ACLr). 7 participants with ACLr and 7 healthy controls underwent transcranial magnetic stimulation (TMS) and electrical stimulation. To evaluate supraspinal excitability, resting motor thresholds (RMT) and motor evoked potential (MEP) stimulus response curves (SRC) were used. To measure spinal excitability, H-reflex SRC gain was assessed. Mixed factorial ANOVAs were used to compare measures between limbs and between groups. Cohen’s d was used to assess effect sizes between groups. Data indicated no significant differences between subject groups or between limbs. However, large effect sizes were found between limbs for H-reflex gain and RMTs suggesting that ACLr can have an effect on some of the variables examined. This study identified decreases in strength in the injured limbs and that subjects with an ACL injury exhibited decreases in spinal and supraspinal excitability of the quadriceps compared to Healthy controls.

Caractérisation de l’activité Nur77 et de ses complexes en essais BRET par complémentation

Dans le système nerveux central, la dopamine joue un rôle crucial dans de nombreuses fonctions physiologiques telles que : l’apprentissage, le mouvement volontaire, la motivation, la cognition et la production hormonale. Il a été aussi démontré que le système de signalisation dopaminergique est altéré dans plusieurs maladies neurologiques et psychiatriques comme la maladie de Parkinson et la schizophrénie. Des études, effectuées dans le laboratoire du Dr.Daniel Lévesque (laboratoire d’accueil), ont montré que les récepteurs nucléaires Nur77 (NR4A1, NGFI-B) et RXRγ (retinoid X receptors γ) sont impliqués dans la régulation des effets de la dopamine dans le système nerveux central. De plus, ces données suggèrent que le complexe Nur77 et RXR joueraient un rôle crucial dans l’effet des médicaments antipsychotiques et antiparkinsoniens. Toutefois, très peu de médicaments ciblant Nur77 ont été identifiés à ce jour et les médicaments agissant sur RXRγ restent mal caractérisés. En outre, les analyses actuellement disponibles ne peuvent pas résumer la complexité des activités des NRs et génèrent des mesures indirectes des activités des drogues. Afin de mieux comprendre comment est régulée l’interaction Nur77/RXRγ dans ces processus, mon projet a été de mettre au point un essai BRET (Bioluminescence Resonance Energy Transfer) et PCA-BRET (Protein Complementation Assay-BRET) basé sur le recrutement d'un motif mimant un co-activateur fusionné avec la YFP. Nos différents essais ont été validés par courbes dose-réponse en utilisant différents composés RXR . Les EC50 (concentration efficace médiane, qui permet de mesurer l'efficacité d'un composé) obtenues étaient très semblables aux valeurs précédemment rapportées dans la littérature. Nous avons aussi pu identifier un composé le SR11237 (BMS649) qui semble posséder une sélectivité pour le complexe Nur77/RXRγ par rapport aux complexes Nurr1/RXRγ et RXRγ /RXRγ. Nos résultats indiquent que ces essais de BRET peuvent être utilisés pour évaluer la sélectivité de nouveaux composés pour les complexes Nur77/RXRγ, Nurr1/RXRγ et RXRγ /RXRγ. Un autre aspect de mon projet de doctorat a été de mettre en évidence par BRET l’importance de la SUMOylation dans la régulation de l'activité de Nur77 dans sa forme monomèrique, homodimèrique et hétérodimèrique. Nous avons ainsi identifié que Nur77 recrute principalement SUMO2 sur sa lysine 577. Il est intéressant de noté que le recrutement de la SUMO2 à Nur77 est potentialisé en présence de la SUMO E3 Ligase PIASγ. Aussi, la perte de la SUMOylation sur la lysine 577 entraîne l'incapacité de Nur77 de recruter divers motifs de co-activation mais pas pour ses formes homo- et hétérodimèrique. Cependant, la présence de PIASγ ne potentialise pas le recrutement du co-activateur, suggérant que cette SUMO E3 Ligase est seulement impliqué dans le processus de recrutement de la SUMO mais pas dans celui du co-activateur. Nous avons ainsi déterminé une nouvelle modification post-traductionnelle sur Nur77 régulant spécifiquement son activité monomérique Ces projets pourraient donc apporter de nouvelles données cruciales pour l’amélioration du traitement de la maladie de Parkinson ou de la schizophrénie, ainsi que d'obtenir une meilleure compréhension sur les mécanismes permettant la régulation de la fonction de Nur77

Dasatinib (BMS-35482) potentiates the activity of gemcitabine and docetaxel in uterine leiomyosarcoma cell lines.

BACKGROUND: To explore the activity of dasatinib alone and in combination with gemcitabine and docetaxel in uterine leiomyosarcoma (uLMS) cell lines, and determine if dasatinib inhibits the SRC pathway. METHODS: SK-UT-1 and SK-UT-1B uLMS cells were treated with gemcitabine, docetaxel and dasatinib individually and in combination. SRC and paxcillin protein expression were determined pre- and post-dasatinib treatment using Meso Scale Discovery (MSD) multi-array immunogenicity assay. Dose-response curves were constructed and the coefficient of drug interaction (CDI) and combination index (CI) for drug interaction calculated. RESULTS: Activated phosphorylated levels of SRC and paxillin were decreased after treatment with dasatinib in both cell lines (p < 0.001). The addition of a minimally active concentration of dasatinib (IC25) decreased the IC50 of each cytotoxic agent by 2-4 fold. The combination of gemcitabine-docetaxel yielded a synergistic effect in SK-UT-1 (CI = 0.59) and an antagonistic effect in SK-UT-1B (CI = 1.36). Dasatinib combined with gemcitabine or docetaxel revealed a synergistic anti-tumor effect (CDI < 1) in both cell lines. The triple drug combination and sequencing revealed conflicting results with a synergistic effect in SK-UT-1B and antagonistic in SK-UT-1. CONCLUSION: Dasatinib inhibits the SRC pathway and yields a synergistic effect with the two-drug combination with either gemcitabine or docetaxel. The value of adding dasatinib to gemcitabine and docetaxel in a triple drug combination is uncertain, but may be beneficial in select uLMS cell lines. Based on our pre-clinical data and known activity of gemcitabine and docetaxel, further evaluation of dasatinib in combination with these agents for the treatment of uLMS is warranted.

Modelled niche centres and niche breadths of open ocean phytoplankton taxa

This data contains realized ecological niche estimates of phytoplankton taxa within the mixed layer of the open ocean. The estimates are based on data from the MARine Ecosystem DATa (MAREDAT) initiative, and cover five phytoplankton functional types: coccolithophores (40 species), diatoms (87 species), diazotrophs (two genera), Phaeocystis (two species) and picophytoplankton (two genera). Considered as major niche dimensions were temperature (°C), mixed layer depth (MLD; m), nitrate concentration (µmoles/L), mean photosynthetically active radiation in the mixed layer (MLPAR; µmoles/m**2/s), salinity, and the excess of phosphate versus nitrate relative to the Redfield ratio (P*; µmoles/L). For each niche dimension at a time, conditions at presence locations of the taxa were contrasted with conditions in 12 000 randomly sampled points from the open ocean using MaxEnt models. We used the quartiles of the response curves of these models to parameterize realized niche centers and niche breadths: the median (q50) of the response curves was considered to be the niche center and the distance between the lower quartile (q25) and the upper quartile (q75) was used as a rough estimate of niche breadth. We only reported meaningful niche estimates, i.e., estimates based on MaxEnt models that perform significantly better than random, as indicated by an area under the curve (AUC) score significantly larger than 0.5.

(Table 1) Radionuclides and ESR dating of sediment cores PS1535-10 and PS1535-8

ESR-spectra of foraminifera in arctic sediment cores display the [CO2]- -signal (g=2.0006). Research on the thermal behaviour of the [CO2]- -signal shows that both natural and artificial irradiation generates a precursor and a thermal unstable component of the [CO2]- -signal. The precursor can be transfered to the stable radical, and unstable radicals can be removed by heating. The signal-change by heating depends on the irradiation dose. Because of the varying response on thermal treatment, the dose-response curves show systematic differences depending on the applied procedure (single- or multi-aliquot method with or without heating). A model for the description of the [CO2]- -signal-change is presented. The combination of two exponential saturation functions seems to be an adequate analytical description of the dose-response curve of the [CO2]- -signal in foraminifera. Due to the limited thermal stability this signal can be used for dating foraminifera with ages up to about 190 ka.

Calcification repsonse of m,arione bivalves to changed carbonate chemistry

Bivalve calcification, particularly of the early larval stages, is highly sensitive to the change in ocean carbonate chemistry resulting from atmospheric CO2 uptake. Earlier studies suggested that declining seawater [CO32-] and thereby lowered carbonate saturation affect shell production. However, disturbances of physiological processes such as acid-base regulation by adverse seawater pCO2 and pH can affect calcification in a secondary fashion. In order to determine the exact carbonate system component by which growth and calcification are affected it is necessary to utilize more complex carbonate chemistry manipulations. As single factors, pCO2 had no effects and [HCO3-] and pH had only limited effects on shell growth, while lowered [CO32-] strongly impacted calcification. Dissolved inorganic carbon (CT) limiting conditions led to strong reductions in calcification, despite high [CO32-], indicating that [HCO3-] rather than [CO32-] is the inorganic carbon source utilized for calcification by mytilid mussels. However, as the ratio [HCO3-] / [H+] is linearly correlated with [CO32-] it is not possible to differentiate between these under natural seawater conditions. An equivalent of about 80 µmol kg-1 [CO32-] is required to saturate inorganic carbon supply for calcification in bivalves. Below this threshold biomineralization rates rapidly decline. A comparison of literature data available for larvae and juvenile mussels and oysters originating from habitats differing substantially with respect to prevailing carbonate chemistry conditions revealed similar response curves. This suggests that the mechanisms which determine sensitivity of calcification in this group are highly conserved. The higher sensitivity of larval calcification seems to primarily result from the much higher relative calcification rates in early life stages. In order to reveal and understand the mechanisms that limit or facilitate adaptation to future ocean acidification, it is necessary to better understand the physiological processes and their underlying genetics that govern inorganic carbon assimilation for calcification.

Molecular docking and geographical information systems as tools to assess the potential impact of veterinary medicines on non-target organisms and the environment

Veterinary medicines (VMs) from agricultural industry can enter the environment in a number of ways. This includes direct exposure through aquaculture, accidental spillage and disposal, and indirect entry by leaching from manure or runoff after treatment. Many compounds used in animal treatments have ecotoxic properties that may have chronic or sometimes lethal effects when they come into contact with non-target organisms. VMs enter the environment in mixtures, potentially having additive effects. Traditional ecotoxicology tests are used to determine the lethal and sometimes reproductive effects on freshwater and terrestrial organisms. However, organisms used in ecotoxicology tests can be unrepresentative of the populations that are likely to be exposed to the compound in the environment. Most often the tests are on single compound toxicity but mixture effects may be significant and should be included in ecotoxicology testing. This work investigates the use, measured environmental concentrations (MECs) and potential impact of sea lice treatments on salmon farms in Scotland. Alternative methods for ecotoxicology testing including mixture toxicity, and the use of in silico techniques to predict the chronic impact of VMs on different species of aquatic organisms were also investigated. The Scottish Environmental Protection Agency (SEPA) provided information on the use of five sea lice treatments from 2008-2011 on Scottish salmon farms. This information was combined with the recently available data on sediment MECs for the years 2009-2012 provided by SEPA using ArcGIS 10.1. In depth analysis of this data showed that from a total of 55 sites, 30 sites had a MEC higher than the maximum allowable concentration (MAC) as set out by SEPA for emamectin benzoate and 7 sites had a higher MEC than MAC for teflubenzuron. A number of sites that were up to 16 km away from the nearest salmon farm reported as using either emamectin benzoate or teflubenzuron measured positive for the two treatments. There was no relationship between current direction and the distribution of the sea lice treatments, nor was there any evidence for alternative sources of the compounds e.g. land treatments. The sites that had MECs higher than the MAC could pose a risk to non-target organisms and disrupt the species dynamics of the area. There was evidence that some marine protected sites might be at risk of exposure to these compounds. To complement this work, effects on acute mixture toxicity of the 5 sea lice treatments, plus one major metabolite 3-phenoxybenzoic acid (3PBA), were measured using an assay using the bioluminescent bacteria Aliivibrio fischeri. When exposed to the 5 sea lice treatments and 3PBA A. fischeri showed a response to 3PBA, emamectin benzoate and azamethiphos as well as combinations of the three. In order to establish any additive effect of the sea lice treatments, the efficacy of two mixture prediction equations, concentration addition (CA) and independent action ii(IA) were tested using the results from single compound dose response curves. In this instance IA was the more effective prediction method with a linear regression confidence interval of 82.6% compared with 22.6% of CA. In silico molecular docking was carried out to predict the chronic effects of 15 VMs (including the five used as sea lice control). Molecular docking has been proposed as an alternative screening method for the chronic effects of large animal treatments on non-target organisms. Oestrogen receptor alpha (ERα) of 7 non-target bony fish and the African clawed frog Xenopus laevis were modelled using SwissModel. These models were then ‘docked’ to oestradiol, the synthetic oestrogen ethinylestradiol, two known xenoestrogens dichlorodiphenyltrichloroethane (DDT) and bisphenol A (BPA), the antioestrogen breast cancer treatment tamoxifen and 15 VMs using Auto Dock 4. Based on the results of this work, four VMs were identified as being possible xenoestrogens or anti-oestrogens; these were cypermethrin, deltamethrin, fenbendazole and teflubenzuron. Further investigation, using in vitro assays, into these four VMs has been suggested as future work. A modified recombinant yeast oestrogen screen (YES) was attempted using the cDNA of the ERα of the zebrafish Danio rerio and the rainbow trout Oncorhynchus mykiss. Due to time and difficulties in cloning protocols this work was unable to be completed. Use of such in vitro assays would allow for further investigation of the highlighted VMs into their oestrogenic potential. In conclusion, VMs used as sea lice treatments, such as teflubenzuron and emamectin benzoate may be more persistent and have a wider range in the environment than previously thought. Mixtures of sea lice treatments have been found to persist together in the environment, and effects of these mixtures on the bacteria A. fischeri can be predicted using the IA equation. Finally, molecular docking may be a suitable tool to predict chronic endocrine disrupting effects and identify varying degrees of impact on the ERα of nine species of aquatic organisms.