982 resultados para Fk-960
Resumo:
A invenção descreve uma classe de materiais compósitos cerâmicos ferroelétricos nanoestruturados à base do óxido niobato de estróncio e potássio obtidos via sinterização aditivada com óxidos de cobre (CuO/Cu~ 2~O), preferencialmente o óxido de cobre II, e óxido de boro (B~ 2~O~ 3~). Os materiais compósitos cerâmicos KSN - CuO:B~ 2~O~ 3~ são sinterizados entre 960<198>C a 1250<198>C, diversas razões em massa CuO:B~ 2~O~ 3~ (1:1, 1:2, e 1:4) são utilizadas como aditivos de sinterização.
Resumo:
OBJECTIVES: There are no data in the literature with regard to the acute effects of different styles of music on the geometric indices of heart rate variability. In this study, we evaluated the acute effects of relaxant baroque and excitatory heavy metal music on the geometric indices of heart rate variability in women. METHODS: We conducted this study in 21 healthy women ranging in age from 18 to 35 years. We excluded persons with previous experience with musical instruments and persons who had an affinity for the song styles. We evaluated two groups: Group 1 (n = 21), who were exposed to relaxant classical baroque musical and excitatory heavy metal auditory stimulation; and Group 2 (n = 19), who were exposed to both styles of music and white noise auditory stimulation. Using earphones, the volunteers were exposed to baroque or heavy metal music for five minutes. After the first music exposure to baroque or heavy metal music, they remained at rest for five minutes; subsequently, they were re-exposed to the opposite music (70-80 dB). A different group of women were exposed to the same music styles plus white noise auditory stimulation (90 dB). The sequence of the songs was randomized for each individual. We analyzed the following indices: triangular index, triangular interpolation of RR intervals and Poincaré plot (standard deviation of instantaneous beat-by-beat variability, standard deviation of the long-term RR interval, standard deviation of instantaneous beat-by-beat variability and standard deviation of the long-term RR interval ratio), low frequency, high frequency, low frequency/high frequency ratio, standard deviation of all the normal RR intervals, root-mean square of differences between the adjacent normal RR intervals and the percentage of adjacent RR intervals with a difference of duration greater than 50 ms. Heart rate variability was recorded at rest for 10 minutes. RESULTS: The triangular index and the standard deviation of the long-term RR interval indices were reduced during exposure to both music styles in the first group and tended to decrease in the second group whereas the white noise exposure decreased the high frequency index. We observed no changes regarding the triangular interpolation of RR intervals, standard deviation of instantaneous beat-by-beat variability and standard deviation of instantaneous beat-by-beat variability/standard deviation in the long-term RR interval ratio. CONCLUSION: We suggest that relaxant baroque and excitatory heavy metal music slightly decrease global heart rate variability because of the equivalent sound level.
Resumo:
An experiment was conducted to evaluate the performance, bone densitometry and carcass yield of broilers chicks, using different levels of phytase enzyme. Nine hundred and sixty male one-day-old broiler chicks were used. The birds were distributed in a completely randomized experimental design, involving five treatments and six replications of 32 chicks each. The treatments consisted of a control diet for each phase, and four other diets were formulated adding growing levels of the phytase enzyme (250, 500, 750 and 1,000 FTU of phytase kg-1 feed). When adding the phytase enzyme, the nutritional matrix was valued to guarantee the same nutritional levels as the control diet. In general, the addition of phytase enzyme determined a linear decrease on the performance of the birds. However, the performance obtained with the level of 250 FTU phytase kg-1 feed were no different from the control treatment. The best bone density results were observed in the control treatment with no phytase, and the highest leg and thigh yield were obtained at the level of 514 FTU phytase kg-1.
Resumo:
Pós-graduação em Genética e Melhoramento Animal - FCAV
Resumo:
Pós-graduação em Genética e Melhoramento Animal - FCAV
Resumo:
A serial of factors related to development of glyphosate-tolerant corn should be approached and best studied. This work was developed to evaluate foliar levels of N, P, K, Ca, Mg, S, B, Cu, Fe, Mn and Zn, besides the grain yield of glyphosate-tolerant corn (DKB390 RR hybrid). An experiment was carried out under field conditions, during the crop year of 2010/2011. A randomized complete block design with four repetitions was used to distribute the treatments in the field. Twelve herbicide treatments were studied: glyphosate (720, 1200 and sequential application of 960 plus 720 g ha(-1) of the acid glyphosate equivalent), atrazine (2500 g ha(-1)), nicosulfuron (60 g ha(-1)), mesotrione (192 g ha(-1)), tembotrione (100,8 g ha(-1)), atrazine plus glyphosate (1000 + 960 g ha(-1)), atrazine plus nicosulfuron (1000 + 20 g ha(-1)), atrazine plus mesotrione (1000 + 144 g ha(-1)) and atrazine plus tembotrione (1000 + 75,6 g ha(-1)) and one control treatment without herbicide. The glyphosate and mesotrione alone did not cause no visible injury to corn. The other herbicides caused intoxication symptoms classified as light (<5%). The treatments studied did not affect foliar levels of N, P, K, Ca, Mg, S, B, Mn and Zn in the corn plants. But, the plants treated with atrazine plus nicosulfuron had more leaf Fe content, and the plants sprayed with glyphosate (in the three doses) and atrazine, more accumulation of Cu in the leaf. The Grain yield of corn was reduced with application single of glyphosate (1200 g ha(-1)), nicosulfuron, tembotrione and with the mixture atrazine plus nicosulfuron.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Pós-graduação em Agronomia - FEIS
Resumo:
Objective. To determine the effects of different aging methods on the degradation and flexural strength of yttria-stabilized tetragonal zirconia (Y-TZP)Methods. Sixty disc-shaped specimens (0, 12 mm; thickness, 1.6 mm) of zirconia (Vita InCeram 2000 YZ Cubes, VITA Zahnfabrik) were prepared (ISO 6872) and randomly divided into five groups, according to the aging procedures (n=10): (C) control; (M) mechanical cycling (15,000,000 cycles/3.8 Hz/200N); (T) thermal cycling (6,000 cycles/5-55 degrees C/30 s); (TM) thermomechanical cycling (1,200,000 cycles/3.8 Hz/200N with temperature range from 5 C to 55 C for 60s each); (AUT) 12h in autoclave at 134 degrees C/2 bars; and (STO) storage in distilled water (37 degrees C/400 days). After the aging procedures, the monoclinic phase percentages were evaluated by X-ray diffraction (XRD), and topographic surface analysis was performed by 3D profilometry. The specimens were then subjected to biaxial flexure testing (1 mm/min, load 100 kgf, in water). The biaxial flexural strength data (MPa) were analyzed by 1-way ANOVA and Tukey's test (alpha = 0.05). The data for monoclinic phase percentage and profilometry (Ra) were analyzed by Kruskal-Wallis and Dunn's tests.Results. ANOVA revealed that flexural strength was affected by the aging procedures (p = 0.002). The M (781.6 MPa) and TM (771.3 MPa) groups presented lower values of flexural strength than did C (955 MPa), AUT (955.8 MPa), T (960.8 MPa) and STO (910.4 MPa). The monoclinic phase percentage was significantly higher only for STO (12.22%) and AUT (29.97%) when compared with that of the control group (Kruskal-Wallis test, p = 0.004). In addition, the surface roughnesses were similar among the groups (p = 0.165).Signcance. Water storage for 400 days and autoclave aging procedures induced higher phase transformation from tetragonal to monoclinic; however, they did not affect the flexural strength of Y-TZP ceramic, which decreased only after mechanical and thermomechanical cycling. (C) 2014 Academy of Dental Materials. Published by Elsevier Ltd. All rights reserved.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Dentre os reagentes alternativos, têm-se destacado o peróxido de hidrogênio, visando atender às demandas de produção de celulose ECF. Reagentes como cloro e dióxido de cloro reagem com a lignina residual, levando à formação de compostos organoclorados, fator negativo para as questões relacionadas ao meio ambiente. O fator kappa (FK) é determinante para a dosagem de dióxido de cloro em seqüencias de branqueamento que determinarão a alvura requerida e reduzirão a formação de compostos organoclorados no licor residual. O presente estudo avaliará o efeito da lignina residual através do número de permanganato, após o estágio D1, no branqueamento com peróxido de hidrogênio. Foram realizados cinco branqueamentos de polpas iguais por seqüências ECF em ensaios laboratoriais, variando-se o fator kappa entre eles. O branqueamento foi realizado com uma polpa kraft de eucalipto, prédeslignificada com oxigênio, utilizando a quantidade de reagentes requeridas para cada estágio, em sacos de polietileno e mantidas em banho de vapor com controle de temperatura pelo tempo requerido. A seqüência D(E+P)DP proposta foi comparada com a seqüência D(E+P)DD. Os métodos utilizados para realizar este estudo são os de procedimento padrão conforme as normas TAPPI e CPPA para branqueamento em laboratório de polpa celulósica. Foram avaliados os parâmetros de qualidade da polpa branqueada com os valores de alvura, viscosidade, número kappa, número de permanganato, reversão de alvura e custo do processo de branqueamento e a influência do fator kappa sobre cada uma das condições propostas. Os resultados foram interpretados com base para as polpas que atingiram a alvura objetivo de 90 %ISO. Verificou-se que o FK ideal obtido foi de 0,20 para as seqüências avaliadas. A lignina residual afetou negativamente o branqueamento de todas as sequências, sendo a sequência D(E+P)DP com FK de 0,20 e carga ...
Resumo:
Immunosuppressive drugs are used to suppress immune system activity in transplant patients and reduce the risk of organ rejection. The present study evaluated the potential cytotoxic, genotoxic and mutagenic of the immunosuppressive drugs cyclosporine (CsA) and tacrolimus (FK-506) on normal human fibroblasts (MRC-5 cells). Based on plasma concentrations of the immunosuppressive drugs, which were obtained from the records of kidney transplant patients at the Kidney Institute of Londrina, Brazil, 11 concentrations of each immunosuppressive were chosen to evaluate cell viability using the MIT assay. From these results, CsA and FK-506 concentrations of 135, 300, 675, and 1520 ng/ml and 8, 16, 24, and 32 ng/ml, respectively, were evaluated using (i) the comet assay, (ii) the nuclear division index (NDI), (iii) the micronucleus test (CBMN) and (iv) cell proliferation curves generated by quantifying cell numbers and protein levels. In this study, 1520 to 3420 ng/ml CsA decreased cell viability after 48 h of exposure. Genotoxic effects were observed only with a concentration of 1520 ng/ml after 3 h of exposure and with concentrations of 675 and 1520 ng/ml after 24 h of exposure. Mutagenic effects were observed only for the concentration of 1520 ng/ml. FK-506 decreased cell viability after 72 h of exposure for concentrations up to 20 ng/ml; genotoxic effects were observed with concentrations up to 8 ng/ml for both treatment times (3 and 24 h) and mutagenic effects were observed with concentrations of 24 and 32 ng/ml after 24 h of treatment. The cell proliferation curves demonstrated the absence of cytostatic effects of these drugs, and these data were confirmed by the NDI analysis. Our results suggest that concentrations lower than 300 ng/ml of CsA and 16 ng/ml of FK-506 are safe for use, as they did not induce genotoxic and mutagenic damage or affect MRC-5 cell viability and proliferation. (C) 2014 Elsevier GmbH. All rights reserved.
Resumo:
Drug-resistant tuberculosis (TB) is a growing global threat. Approximately 450,000 people developed multidrugresistant TB worldwide in 2012 and an estimated 170,000 people died from the disease. This paper describes the sociodemographic, clinical-epidemiological and bacteriological aspects of TB and correlates these features with the distribution of anti-TB drug resistance. Mycobacterium tuberculosis (MT) cultures and drug susceptibility testing were performed according to the BACTEC MGIT 960 method. The results demonstrated that MT strains from individuals who received treatment for TB and people who were infected with human immunodeficiency virus were more resistant to TB drugs compared to other individuals (p < 0.05). Approximately half of the individuals received supervised treatment, but most drug-resistant cases were positive for pulmonary TB and exhibited positive acid-fast bacilli smears, which are complicating factors for TB control programs. Primary healthcare is the ideal level for early disease detection, but tertiary healthcare is the most common entry point for patients into the system. These factors require special attention from healthcare managers and professionals to effectively control and monitor the spread of TB drug-resistant cases.