Effect of uroguanylin on potassium and bicarbonate transport in rat renal tubules

The effect of uroguanylin (UGN) oil K(+) and H(+) secretion in the renal tubules of the rat kidney was studied using in vivo stationary microperfusion. For the study of K(+) secretion, a tubule was Punctured to inject a column of FDC-green-colored Ringer's solution with 0.5 mmol KCI/L 10(-6)(mol UGN/L, and oil was Used to block fluid flow. K(+) activity and transepithelial potential differences (PD) were measured with double microelectrodes (K(+) ion-selective resin vs. reference) in the distal tubules of the same nephron. During perfusion, K(+) activity rose exponentially, from 0.5 mmol/L to stationary concentration, allowing for the calculation of K(+) secretion J(K)). JK increased from 0.63 +/- 0.06 nmol.cm(-2).s(-1) in the control croup to 0.85 +/- 0.06 in the UGN group (p < 0.01). PD was -51.0 +/- 5.3 mV in the control group and -50.3 +/- 4.98 mV in the UGN group. In the presence of 10(-7) mol iberiotoxin/L, the UGN effect was abolished: JK was 0.37 +/- 0.038 nmol-cm(-2).s(-1) in the absence of, and 0.38 +/- 0.025 in the presence of, UGN. indicating its action oil rnaxi-K channels. In another series of experiments, renal tubule acidification was studied, using similar method: proximal and distal tubules were perfused with solutions containing 25 mmol NaHCO(3)/L. Acidification half-time was increased both in proximal and distal segments and, as a consequence, bicarbonate reabsorption decreased in the presence of UGN (in proximal tubules, from 2.40 +/- 0.26 to 1.56 +/- 0.21 nmol-cm(-2).s(-1)). When the Na(+)/H(+) exchanger was inhibited by 10(-4) mol hexamethylene amiloride (HMA)/L, the control and UGN groups were not significantly different. In the late distal tubule, after HMA, UGN significantly reduced J(HCO3)(-). indicating all effect of UGN oil H(+)-ATPase. These data show that UGN stimulated J(K)(+) by actin, oil maxi-K channels. and decreased J(HCO3)(-) by acting on NHE3 in proximal and H(+)-ATPase in distal tubules.

Comparison of metallic and ceramic tubes as atomization cells for tin determination by TS-FF-AAS

This work describes the development of an analytical procedure for on-line tin determination using thermospray flame furnace atomic absorption spectrometry (TS-FF-AAS). Two tubes were evaluated as atomization cells: a metallic tube (Ni-Cr, principal components composition: 73.95% Ni and 16.05% Cr) and a ceramic tube (99.8% Al2O3). The use of air as the carrier was made by employing a Rheodyne valve to inject the samples, allowing an analytical frequency of 90 h(-1) and avoiding sample dispersion. The carrier flow rate (air), sample volume injected, and acid concentration (HCl) were evaluated for the optimization of the TS-FF-AAS system. The sensitivity for 50 mL of analytical solution with TS-FF-AAS was 2 and 5 times higher (to metallic and ceramic tube, respectively) than using an acetylene-nitrous oxide flame with pneumatic aspiration (requiring a sample volume of approximately 20 times higher.

Radionuclides, heavy metals and fluorine incidence at Tapira phosphate rocks, Brazil, and their industrial (by) products

Inorganic phosphate fertilizers may contain radionuclides, heavy metals and fluorine. This paper presents the possible environmental hazards from Tapira phosphate rocks and their (by) products (Brazil) utilized as phosphate fertilizers. The activity concentration of U-238, U-234, Ra-226 and K-40 in Tapira phosphate rocks is within the world range for these rock types. The Th-232 activity concentration is higher than the mean reported in phosphate rocks. A value of 2184 nGy h(-1) was obtained for the exposure dose rate in Tapira phosphate deposit area, which is indicative of a high background radiation area. The flotation-separation process causes the incorporation of no more than 9%, 11 % and 24% of radionuclides, heavy metals and fluorine, respectively, into the phosphate concentrate. The radionuclides and heavy metals existing in phosphate fertilizers applied in Brazilian crops according to the recommended rates, do not raise their concentration in soils to harmful levels. (C) 2005 Elsevier Ltd. All rights reserved.

Two-way regionalized classification of multivariate datasets and its application to the assessment of hydrodynamic dispersion

Zones of mixing between shallow groundwaters of different composition were unravelled by two-way regionalized classification, a technique based on correspondence analysis (CA), cluster analysis (ClA) and discriminant analysis (DA), aided by gridding, map-overlay and contouring tools. The shallow groundwaters are from a granitoid plutonite in the Funda o region (central Portugal). Correspondence analysis detected three natural clusters in the working dataset: 1, weathering; 2, domestic effluents; 3, fertilizers. Cluster analysis set an alternative distribution of the samples by the three clusters. Group memberships obtained by correspondence analysis and by cluster analysis were optimized by discriminant analysis, gridded memberships as follows: codes 1, 2 or 3 were used when classification by correspondence analysis and cluster analysis produced the same results; code 0 when the grid node was first assigned to cluster 1 and then to cluster 2 or vice versa (mixing between weathering and effluents); code 4 in the other cases (mixing between agriculture and the other influences). Code-3 areas were systematically surrounded by code-4 areas, an observation attributed to hydrodynamic dispersion. Accordingly, the extent of code-4 areas in two orthogonal directions was assumed proportional to the longitudinal and transverse dispersivities of local soils. The results (0.7-16.8 and 0.4-4.3 m, respectively) are acceptable at the macroscopic scale. The ratios between longitudinal and transverse dispersivities (1.2-11.1) are also in agreement with results obtained by other studies.

An adaptive system based on artificial neural networks for NPK fluid fertilizer application

The application process of fluid fertilizers through variable rates implemented by classical techniques with feedback and conventional equipments can be inefficient or unstable. This paper proposes an open-loop control system based on artificial neural network of the type multilayer perceptron for the identification and control of the fertilizer flow rate. The network training is made by the algorithm of Levenberg-Marquardt with training data obtained from measurements. Preliminary results indicate a fast, stable and low cost control system for precision fanning. Copyright (C) 2000 IFAC.

The characteristics of a test liquid formulation for use in evaluating the performance of handling and metering systems

Injection metering systems are an important option for the development of pesticide application equipment, with advantages relating to minimising the need for disposal of unused pesticide, improving the ease of cleaning and optimising the accuracy of chemical application. For all injection systems, characteristics such as the steady-state accuracy of delivered dose, dose stability and the time response for dose step changes are related to the ability of the system to operate with different chemical formulations. A system designed to inject liquids should be able to accommodate changes in viscosity and density. The aim of this study was to develop a methodology for testing chemical injection systems using liquids with different viscosities. The experimental arrangement simulating applications with injection metering systems used dye and salt solutions as tracers. Tests were conducted to analyse the influence of salt on the characteristics of the water and a viscous solution. Results showed that the salt interfered with the dye stability in the water solution. In tests with a viscous test liquid, the salt was introduced at different steps during the mixing process, providing four different liquids to be analysed in terms of viscosity, density and pH. Some differences in liquid characteristics were found which could influence the performance of the injection systems.

Desenvolvimento e produtividade do algodoeiro em função de espaçamentos e aplicação de regulador de crescimento

Currently, the cultivation of the cotton plant is based on a scale production model, characterized by high yields and intensive use of fertilizers, agrochemicals and mechanization. The objective of this study was to evaluate the influence of different row spacings on cotton crops, with or without growth regulator, and their effects in crop development and yield. The experimental design was in completely randomized blocks, in a 3x3 factorial scheme with 4 replications, using three row spacings: 0.45, 0.70 and 0.90 m. Three growth regulator conditions were tested: a) application split into four stages, b) single application at 70 d.a.e, and c) no regulator application. The project was conducted in the city of Selviria, Mato Grosso do Sul state, in November 2005. It was verified that the application of growth regulator is efficient in the limitation of plant height. The highest yield and boll mass was found in the split application of the regulator. The number of bolls and reproductive branches per plant was higher in the wider row spacings.

Effect of foliar and substrate fertilization on lady palm seedling growth and development

Lady palm, [Rhapis excelsa (Thunberg) Henry ex. Rehder] is one of the most cultivated ornamental palms in the world, for use as a vase plant or in shaded landscapes. Because limited information exists on lady palm response to fertilizers, the objective of this study was to evaluate the effect of different types of fertilization and substrates on lady palm seedling growth and development. Three year old lady palms were planted in 8-L pots, filled with a mix of soil, manure, and sand 1:1:1 (v:v:v), placed under a 50% shade, and irrigated with microspray. Treatments were substrate fertilization with 500 g P(2)O(5) and 100 g K(2)O per m(3); fertilization with 1.8 kg of P(2)O(5) (simple superphosphate) per m3; 50 g of nitrogen (N), P(2)O(5), and K(2)O of a granulated fertilizer (10:10:10) per m(3), control (without fertilization), and a foliar fertilization in addition to these treatments using the commercial product Biofert (8:9:9). Treatments were replicated four times in a randomized block design. Each treatment plot consisted of four plants. Data were collected at 140, 170, 200, 230, 260, and 290 days after transplanting (DAT) for plant heights, stem diameter at substrate level, number of leaves, shoots, and canopy, roots fresh and dry matter samples were harvest at 290 days. Foliar fertilization resulted in significantly greater plant height in a 140, 120, 200, and 230 DAT and plant diameter on the 140, 260, and 290 DAT. There was interaction among factors for number of leaves with fertilization based on P(2)O(5) and K(2)O when leaf fertilizer was added that resulted in a greater number of leaves.

Crescimento de mudas micropropagadas da bananeira cv. Nanicão, em diferentes substratos e fontes de fertilizante

With the objective of evaluating the effect of different substrates combined with fertilizers in the growth of micropropagated seedlings of Cavendish banana (Musa spp. AAA), ail experiment was conducted in a randomized block design, in a 5 x 3 factorial scheme, with four repetitions. The substrates used were: S1 - subsoil land + carbonized rice hull + Rendmax Floreira (R); S2 - subsoil land + carbonized rice hull + Organifol (R); S3 - subsoil land + carbonized rice hull + Organifol (R) 9% SiO; S4 - Technes Vivatto (R); S5 - thick sand + carbonized rice hull + Rendmax Floreira (R). The fertilizer sources were: SA - without fertilizer; LL - slow-release fertilizer - Osmocote (R) 3M 14-14-14 (5.0 kg m(-3)) inixed in the substrate; and LN - normal-release fertilizer, 14-14-14 (7.5 g seedling(-1)) applied in covering. The height, collar diameter, leaf number, leaf area and dry matter were determined. Based on the differences of growth, substrates S 1, S2, S3 and S4 can be used with fertilizer 14-14-14, with slow (5.0 kg m(-3)) or normal (7.5 g seedling(-1)) release of nutrients.

Tannery sludge compost amendment rates on soil microbial biomass of two different soils

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Use of levoglucosan, potassium, and water-soluble organic carbon to characterize the origins of biomass-burning aerosols

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade tecnológica da cana-de-açúcar sob adubação com torta de filtro enriquecida com fosfato solúvel

The study had the objective to evaluate the effect of the fertilization with filter cake enriched with soluble phosphate on the sugar yield. The experiment carried at Presidente Prudente-SP, used a randomized complete block design, in the factorial scheme 5 x 4, where the first factor consisted of doses of filter cake (0; 0.5; 1.0; 2.0 and 4.0 t ha(-1)) and the second, doses of phosphorus fertilizer (0, 50, 100, 200 kg ha(-1) of P2O5), with 4 replicates, totaling 80 plots. The results indicated that phosphorus applied in planting furrows improves the quality of sugarcane raw matter by increasing the levels of soluble solids, total reducing sugars and sucrose in the stalks. The phosphorus also increases the productivity of sugar. The filter cake applied in planting furrow has the potential to partially replace the chemical fertilization with phosphate aiming to improve the quality and the productivity of sugar. The best combination was filter cake at dose between 2.6 and 2.7 t ha(-1) combined with dose between 160 and 190 kg P2O5 ha(-1) for obtaining best response of soluble solids and productivity of sugar.

Behaviour of biofuel addition on metallurgical properties of sinter

Blast furnace gas yield is essentially controlled by a gas-solid reaction phenomenon, which strongly influences hot metal manufacturing costs. As a result of rising prices for reducing agents on the international market, Companhia Siderurgica Nacional decided to inject natural gas into its blast furnaces. With more gas inside the furnace, the burden permeability became even more critical. To improve blast furnace gas yield, a new technological approach was adopted; raising the metallic burden reaction surface. To that end, a special sinter was developed with permeability being controlled by adding micropore nucleus forming agents, cellulignin coal, without, however, degrading its mechanical properties. This paper shows the main process parameters and the results from physicochemical characterisation of a sinter with controlled permeability, on a pilot scale, compared to those of conventional sinter. Gas flow laboratory simulations have conclusively corroborated the positive effects of micropore nucleus forming agents on enhancing sinter permeability.

Effect of different tannery sludge compost amendment rates on growth, biomass accumulation and yield responses of Capsicum plants

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Adubação organomineral e biofertilização líquida na produção de frutos de pinheira ( Annona squamosa L.) no submédio São Francisco, Brasil

The organic production systems based on natural processes do not allow the use of synthetic fertilizers with a high solubility, so it is required the use of technologies in accordance with the organic production legislation in order to make the technical, economical and environmental sustainable activities viable. To evaluate the effects of the usage of mineral and organic natural fertilizers, associated with liquid biofertilizers (BLE= enriched liquid biofertilizer and BF= leaf biofertilizers) on the production of the sugar apple fruit crop Annona squamosa L., replacing totally the chemical fertilizers, used by conventional farming systems, a nine year old orchard was driven in the irrigated plot n degrees 1295, irrigated project Nilo Coelho, district of Petrolina - PE. The experiment was carried out from September 2005 to February 2006. The experimental design was done through randomized blocks with eight treatments and four replications in plots of three plants each, with 96 plants in total. The treatments were the following: T(1) - plants with no fertilizer; T(2) - 60 g de N + 32 g de P(2)O(5) + 48 g de K(2)O; T(3) - 90g de N + 32 g de P(2)O(5) + 48 g de K(2)O; T(4) - 30 g de N + 32 g de P(2)O(5) + 48 g de K(2)O + 15 L de BLE + BF a 5 %; T(5) - 60g de N + 32 g de P(2)O(5) + 48 g de K(2)O + 30 L de BLE + BF a 5 %; T(6)- 90g de N + 32 g de P(2)O(5) + 48 g de K(2)O + 45 L de BLE + BF a 5 %; T(7) - 120g de N + 32 g de P(2)O(5) + 48 g de K(2)O + 60 L de BLE + BF a 5 %; T(8) - 150 g de N + 32 g de P(2)O(5) + 48 g de K(2)O + 75 L de BLE + BF a 5 % The fruit growth analyses (diameter and average length), total yield, productivity, average fruit weight, average number of fruits, fresh weight of the skin and pulp and dry weight of the fruits were used to evaluate the experiment. The results were relevant to the total production, fresh weight of the skin and dry weight of the fruits. The use of organominerals associated with liquid fertilizers increased significantly the productivity in values ranging from 10.44% (T(5) = 1.98 t ha(-1)) to 24.52 % (T(7) = 12.34 %). The treatment T(3) stood out (90g de N + 32g de P(2)O(5) + 48g de K(2)O) with a higher production than the control. The fruit weight increased in the fertilized treatments, with values increasing from treatment (T(2) = 5.26 %) to the treatment (T(7) = 12.34 %) in relation to the control. The fruit development was characterized by an average growth increase of 82 % in length and 84 % in diameter until the 56(th) day, with a sigmoidal growth pattern.