Results of the sensitivity experiments LOVECLIM as NetCDF files

Several abrupt climatic events during the present interglacial have been associated with catastrophic freshwater forcing, such as the events at 9.2and 8.2 ka BP (Alley et al., 1997; Barber et al., 1999; Marshall et al. 2007; Fleitmann et al. 2008). Proxy evidence suggests that similar events may have occurred during the last interglacial (e.g., Beets & Beets 2003; Beets et al., 2006), suggesting that freshwater-induced perturbations are an important mechanism for abrupt climate change in interglacial climates. In addition solar variability (Neff et al., 2001; Wang et al., 2005) and explosive volcanic eruptions (Crowley, 2000; Shindell et al., 2003; Jansen et al., 2007) can trigger centennial-scale climate events during interglacials and may thus have been responsible for a part of interglacial climate variability. We investigate the sensitivity of the present and last interglacial climates to realistic perturbations resulting from freshwater, solar or volcanic forcings. We will compare the differences between the two interglacial periods, between different climate models and evaluate the resulting using proxy archives.

The Study of International Cultural Relations of Postwar Japan

The paper examines policies and activities of cultural exchange carried out by Japanese national, local and private agents since the end of WWII. Methodologically, we distinctively use the notion culture as a tool and as an object of study, and to synthesize the two in full intention, based on the debate among IR students about so called Cultural Turn in IR theories. As case studies, the Japanese experiences are examined from two points. Firstly, it is compared with the German experiences in Europe, with special attention to the construction of national identity.In both countries, the peoples tried to make use of cultural exchange activities in the management of international relations. The actual developments of cultural relations by the two countries, however, were in striking contrast to each other. Secondly, our study focuses on the explosive expansion of private sector's international cultural exchange in the 1980s in association with so called "emerging civil society" phenomenon observed worldwide throughout 1970s and 1980s. By using our original approach mentioned in the Chapter 1, the paper tries to sketch out that the increase of the private organizations is largely the response of the Japanese society to outside influences, not something genuinely outgrown from within the society itself due to mainly domestic causes.

Exploiting the Modularity of Value Chains: Inter-firm Dynamics of the Taiwanese Notebook PC Industry

This paper explores the inter-firm dynamics that govern the rise of capabilities of latecomer firms operating in global value chains. By extending and modifying the model proposed by Gereffi, Humphrey and Sturgeon [2005], I present a framework in which the rise of supplier capabilities is determined by interactions among the strategies of the firms. Based on a case study of the Taiwanese notebook PC industry, the paper will explore how the interactions among outsourcing strategies by lead firms from the developed countries, the learning strategies of Taiwanese suppliers, and the product strategy of powerful component vendors have driven the explosive growth of the industry after the 1990s. By so doing, the paper attempts to highlight the active roles firms play in determining the speed and direction of the rise in supplier capabilities.

Behavioral characteristics of applied general equilibrium models with an Armington-Krugman-Melitz encompassing module

This paper explore how simulation results change with different choice of trade specification, and the strength of preference for traded variety by economic agent differs, utilizing two types of three-region, three-sector AGE model that includes the Armington-Krugman-Melitz Encompassing module based on Dixon and Rimmer (2012). Simulation experiments reveal that: (1) the Melitz-type specification does not always enhance effectiveness of a certain policy change more than the one obtained with the Krugman-type, especially when economic agents' preference for traded variety is not so strong; (2) there are likely to be points where the volumes of effects obtained with the Melitz-type exceed the ones with the Krugman-type; and (3) the preference of the producers, those who are in the sectors that exhibit increasing returns to scale, for traded variety might be the engine of explosive effects as suggested by Fujita, et al. (2000).

Asymmetric propagation of airblast from bench blasting

This paper investigates the propagation of airblast from quarry blasting. Peak overpressure is calculated as a function of blasting parameters (explosive mass per delay and velocity at which the detonation sequence proceeds along the bench) and polar coordinates of the point of interest (distance to the blast and azimuth with respect to the free face of the blast). The model is in the form of the product of a classical scaled distance attenuation law times a directional correction factor. The latter considers the influence of the bench face, and attenuates overpressure at the top level and amplifies it at the bottom. Such factor also accounts for the effect of the delay by amplifying the pressure in the direction of the initiation sequence if the velocity of initiation exceeds half the speed of sound and up to an initiation velocity in the range of the speed of sound. The model has been fitted to an empirical data set composed by 134 airblast records monitored in 47 blasts at two quarries. The measurements were made at distances to the blast less than 450 m. The model is statistically significant and has a determination coefficient of 0.869

Estudio de la capacidad de arranque de una dinamita gelatinosa frente a una dinamita de seguridad

The objective of this project is to show that the permissible explosive called 20 SR is able to pull out the coal in the normal conditions of blasting in a satisfactory way and to set up the equivalence between the 20 SR and gelatin dynamite (Goma 2 ECO). To achieve this goal some blasting were done, changing the conditions of the blasting and the powder factor for the 20 SR. To analyze the fragmentation base on the analysis of the images of the rock blasted, a commercial software was used. The results from this analysis were compared with the results from the theoretical model for fragmentation created by Kuz – Ram. After all, it was showed that the 20 SR explosive is able to pull out the coal for different coal rock compositions. As the result of this project we can conclude that the 20 SR seems to be able to pull out the coal in normal blasting conditions, using the powder factor as a proportion of the “ballistic mortar” between the two explosives.

Estudio de vibraciones de las voladuras de producción en la cantera de Buruntza y su afección sobre el tramo de la red ferroviaria Andoain – Urnieta (País Vasco)

El estudio de vibraciones tiene por objetivo fijar una banda de seguridad para proteger la nueva línea ferroviaria de alta velocidad Madrid – Vitoria – San Sebastián (tramo Andoain – Urnieta).Las tomas de datos han permitido el cálculo de unas leyes de amortiguación de la propagación de las ondas de vibración que permiten predecir cuál será la magnitud de vibración generada a una cierta distancia de la explotación cuando se detona una carga de explosivo determinada. Así mismo, se lleva a cabo un análisis de las concentraciones de energía (vibraciones) que podrían producirse durante una voladura tipo de producción atendiendo a diferentes secuencias de disparo. Con este método, basado en el disparo de un “barreno semilla” de similares condiciones de carga y arranque que un barreno típico de producción, se pretende resaltar la importancia que tiene el rango de las frecuencias en el proceso de generación y transmisión de vibraciones en el terreno, y consecuentemente en los criterios de protección de estructuras frente a tales vibraciones. ABSTRACT The aim of the vibration study is to set a security band to protect the Spanish high speed train (AVE) which goes Madrid-Vitoria-San Sebastian (section Andoain- Urnieta). The data gathered has made possible the calculation of absorption laws of propagation of vibrating waves, that allow the prediction of the magnitude created at a certain distance of the detonation of a known explosive. In addition, an analysis of the energy concentrations that could appear during a blasting in different sequences is made. With this method based on the firing of a seed drill with similar load and boot conditions of a common production drill, is intended to highlight the importance of the frequency range in the process of vibrations transmission and generation in the field, and consequently the importance in the structures protection criteria against these vibrations.

Estudio de la capacidad de arranque de una dinamita gelatinosa frente a una dinamita de seguridad

El presente proyecto pretende demostrar que el explosivo de seguridad 20 SR es capaz de arrancar el carbón de forma satisfactoria en las condiciones de disparo habituales y establecer la equivalencia práctica de dicho explosivo con una dinamita gelatinosa (Goma 2ECO). Para conseguir este objetivo se realizaron una serie de voladuras, variando las condiciones de disparo y los consumos específicos de la dinamita de seguridad. Se utilizó un software de análisis fotográfico para el estudio de la fragmentación en la pila y también se compararon los resultados obtenidos con el modelo teórico de fragmentación de Kuz – Ram. Los resultados demostraron la capacidad de arranque de la dinamita de seguridad, para diferentes composiciones de carbón. Del estudio parece deducirse que la dinamita de seguridad 20 SR es capaz de arrancar el carbón en condiciones de disparo habituales utilizando un consumo específico proporcional a la relación de la potencia del péndulo balístico de ambos explosivos. ABSTRACT The objective of this project is to show that the permissible explosive called 20 SR is able to pull out the coal in the normal conditions of blasting in a satisfactory way and to set up the equivalence between the 20 SR and gelatin dynamite (Goma 2 ECO). To achieve this goal some blasting were done, changing the conditions of the blasting and the powder factor for the 20 SR. To analyze the fragmentation base on the analysis of the images of the rock blasted, a commercial software was used. The results from this analysis were compared with the results from the theoretical model for fragmentation created by Kuz – Ram. After all, it was showed that the 20 SR explosive is able to pull out the coal for different coal rock compositions. As the result of this project we can conclude that the 20 SR seems to be able to pull out the coal in normal blasting conditions, using the powder factor as a proportion of the “ballistic mortar” between the two explosives.

Prediction of near field overpressure from quarry blasting

This paper investigates the propagation of airblast or pressure waves in air produced by bench blasting (i.e. detonation of the explosive in a row of blastholes, breaking the burden of rock towards the free vertical face of the block). Peak overpressure is calculated as a function of blasting parameters (explosive mass per delay and velocity at which the detonation sequence proceeds along the bench) and the polar coordinates of the position of interest (distance to the source and azimuth with respect to the free face). The model has been fitted to empirical data using linear least squares. The data set is composed of 122 airblast records monitored at distances less than 400 m in 41 production blasts carried out in two quarries. The model is statistically significant and has a determination coefficient of 0.87. The formula is validated from 12 airblast measurements gathered in five additional blasts.

Experimental and numerical analysis of reinforced concrete elements subjected to blast loading

El hormigón es uno de los materiales de construcción más empleados en la actualidad debido a sus buenas prestaciones mecánicas, moldeabilidad y economía de obtención, entre otras ventajas. Es bien sabido que tiene una buena resistencia a compresión y una baja resistencia a tracción, por lo que se arma con barras de acero para formar el hormigón armado, material que se ha convertido por méritos propios en la solución constructiva más importante de nuestra época. A pesar de ser un material profusamente utilizado, hay aspectos del comportamiento del hormigón que todavía no son completamente conocidos, como es el caso de su respuesta ante los efectos de una explosión. Este es un campo de especial relevancia, debido a que los eventos, tanto intencionados como accidentales, en los que una estructura se ve sometida a una explosión son, por desgracia, relativamente frecuentes. La solicitación de una estructura ante una explosión se produce por el impacto sobre la misma de la onda de presión generada en la detonación. La aplicación de esta carga sobre la estructura es muy rápida y de muy corta duración. Este tipo de acciones se denominan cargas impulsivas, y pueden ser hasta cuatro órdenes de magnitud más rápidas que las cargas dinámicas impuestas por un terremoto. En consecuencia, no es de extrañar que sus efectos sobre las estructuras y sus materiales sean muy distintos que las que producen las cargas habitualmente consideradas en ingeniería. En la presente tesis doctoral se profundiza en el conocimiento del comportamiento material del hormigón sometido a explosiones. Para ello, es crucial contar con resultados experimentales de estructuras de hormigón sometidas a explosiones. Este tipo de resultados es difícil de encontrar en la literatura científica, ya que estos ensayos han sido tradicionalmente llevados a cabo en el ámbito militar y los resultados obtenidos no son de dominio público. Por otra parte, en las campañas experimentales con explosiones llevadas a cabo por instituciones civiles el elevado coste de acceso a explosivos y a campos de prueba adecuados no permite la realización de ensayos con un elevado número de muestras. Por este motivo, la dispersión experimental no es habitualmente controlada. Sin embargo, en elementos de hormigón armado sometidos a explosiones, la dispersión experimental es muy acusada, en primer lugar, por la propia heterogeneidad del hormigón, y en segundo, por la dificultad inherente a la realización de ensayos con explosiones, por motivos tales como dificultades en las condiciones de contorno, variabilidad del explosivo, o incluso cambios en las condiciones atmosféricas. Para paliar estos inconvenientes, en esta tesis doctoral se ha diseñado un novedoso dispositivo que permite ensayar hasta cuatro losas de hormigón bajo la misma detonación, lo que además de proporcionar un número de muestras estadísticamente representativo, supone un importante ahorro de costes. Con este dispositivo se han ensayado 28 losas de hormigón, tanto armadas como en masa, de dos dosificaciones distintas. Pero además de contar con datos experimentales, también es importante disponer de herramientas de cálculo para el análisis y diseño de estructuras sometidas a explosiones. Aunque existen diversos métodos analíticos, hoy por hoy las técnicas de simulación numérica suponen la alternativa más avanzada y versátil para el cálculo de elementos estructurales sometidos a cargas impulsivas. Sin embargo, para obtener resultados fiables es crucial contar con modelos constitutivos de material que tengan en cuenta los parámetros que gobiernan el comportamiento para el caso de carga en estudio. En este sentido, cabe destacar que la mayoría de los modelos constitutivos desarrollados para el hormigón a altas velocidades de deformación proceden del ámbito balístico, donde dominan las grandes tensiones de compresión en el entorno local de la zona afectada por el impacto. En el caso de los elementos de hormigón sometidos a explosiones, las tensiones de compresión son mucho más moderadas, siendo las tensiones de tracción generalmente las causantes de la rotura del material. En esta tesis doctoral se analiza la validez de algunos de los modelos disponibles, confirmando que los parámetros que gobiernan el fallo de las losas de hormigón armado ante explosiones son la resistencia a tracción y su ablandamiento tras rotura. En base a los resultados anteriores se ha desarrollado un modelo constitutivo para el hormigón ante altas velocidades de deformación, que sólo tiene en cuenta la rotura por tracción. Este modelo parte del de fisura cohesiva embebida con discontinuidad fuerte, desarrollado por Planas y Sancho, que ha demostrado su capacidad en la predicción de la rotura a tracción de elementos de hormigón en masa. El modelo ha sido modificado para su implementación en el programa comercial de integración explícita LS-DYNA, utilizando elementos finitos hexaédricos e incorporando la dependencia de la velocidad de deformación para permitir su utilización en el ámbito dinámico. El modelo es estrictamente local y no requiere de remallado ni conocer previamente la trayectoria de la fisura. Este modelo constitutivo ha sido utilizado para simular dos campañas experimentales, probando la hipótesis de que el fallo de elementos de hormigón ante explosiones está gobernado por el comportamiento a tracción, siendo de especial relevancia el ablandamiento del hormigón. Concrete is nowadays one of the most widely used building materials because of its good mechanical properties, moldability and production economy, among other advantages. As it is known, it has high compressive and low tensile strengths and for this reason it is reinforced with steel bars to form reinforced concrete, a material that has become the most important constructive solution of our time. Despite being such a widely used material, there are some aspects of concrete performance that are not yet fully understood, as it is the case of its response to the effects of an explosion. This is a topic of particular relevance because the events, both intentional and accidental, in which a structure is subjected to an explosion are, unfortunately, relatively common. The loading of a structure due to an explosive event occurs due to the impact of the pressure shock wave generated in the detonation. The application of this load on the structure is very fast and of very short duration. Such actions are called impulsive loads, and can be up to four orders of magnitude faster than the dynamic loads imposed by an earthquake. Consequently, it is not surprising that their effects on structures and materials are very different than those that cause the loads usually considered in engineering. This thesis broadens the knowledge about the material behavior of concrete subjected to explosions. To that end, it is crucial to have experimental results of concrete structures subjected to explosions. These types of results are difficult to find in the scientific literature, as these tests have traditionally been carried out by armies of different countries and the results obtained are classified. Moreover, in experimental campaigns with explosives conducted by civil institutions the high cost of accessing explosives and the lack of proper test fields does not allow for the testing of a large number of samples. For this reason, the experimental scatter is usually not controlled. However, in reinforced concrete elements subjected to explosions the experimental dispersion is very pronounced. First, due to the heterogeneity of concrete, and secondly, because of the difficulty inherent to testing with explosions, for reasons such as difficulties in the boundary conditions, variability of the explosive, or even atmospheric changes. To overcome these drawbacks, in this thesis we have designed a novel device that allows for testing up to four concrete slabs under the same detonation, which apart from providing a statistically representative number of samples, represents a significant saving in costs. A number of 28 slabs were tested using this device. The slabs were both reinforced and plain concrete, and two different concrete mixes were used. Besides having experimental data, it is also important to have computational tools for the analysis and design of structures subjected to explosions. Despite the existence of several analytical methods, numerical simulation techniques nowadays represent the most advanced and versatile alternative for the assessment of structural elements subjected to impulsive loading. However, to obtain reliable results it is crucial to have material constitutive models that take into account the parameters that govern the behavior for the load case under study. In this regard it is noteworthy that most of the developed constitutive models for concrete at high strain rates arise from the ballistic field, dominated by large compressive stresses in the local environment of the area affected by the impact. In the case of concrete elements subjected to an explosion, the compressive stresses are much more moderate, while tensile stresses usually cause material failure. This thesis discusses the validity of some of the available models, confirming that the parameters governing the failure of reinforced concrete slabs subjected to blast are the tensile strength and softening behaviour after failure. Based on these results we have developed a constitutive model for concrete at high strain rates, which only takes into account the ultimate tensile strength. This model is based on the embedded Cohesive Crack Model with Strong Discontinuity Approach developed by Planas and Sancho, which has proved its ability in predicting the tensile fracture of plain concrete elements. The model has been modified for its implementation in the commercial explicit integration program LS-DYNA, using hexahedral finite elements and incorporating the dependence of the strain rate, to allow for its use in dynamic domain. The model is strictly local and does not require remeshing nor prior knowledge of the crack path. This constitutive model has been used to simulate two experimental campaigns, confirming the hypothesis that the failure of concrete elements subjected to explosions is governed by their tensile response, being of particular relevance the softening behavior of concrete.