An active leakage-injection scheme applied to low-voltage SRAMs

An active leakage-injection scheme (ALIS) for low-voltage (LV) high-density (HD) SRAMs is presented. By means of a feedback loop comprising a servo-amplifier and a common-drain MOSFET, a current matching the respective bit-line leakage is injected onto the line during precharge and sensing, preventing the respective capacitances from erroneous discharges. The technique is able to handle leakages up to hundreds of μA at high operating temperatures. Since no additional timing is required, read-out operations are performed at no speed penalty. A simplified 256×1bit array was designed in accordance with a 0.35 CMOS process and 1.2V-supply. A range of PSPICE simulation attests the efficacy of ALIS. With an extra power consumption of 242 μW, a 200 μA-leakage @125°C, corresponding to 13.6 times the cell current, is compensated.

Importância da região anteroventral do terceiro ventrículo (AV3V) no controle cardiovascular e do equilíbrio hidroeletrolítico

The maintenance of the arterial pressure in normal levels is important for the homeostasis of body fluids. The central nervous system regulating sympathetic and parasympathetic autonomic efferent can adjust arterial pressure which allows animals or human to face different daily activities with the best performance. Different central areas are responsible for the control of autonomic discharges to cardiovascular system and many of them are also involved in the control of fluid electrolyte balance. One of these areas is the tissue surrounding the anteroventral third ventricle (AV3V region) localized in the forebrain and a main central site for angiotensin II receptors and osmoreceptors. The AV3V lesions impair the development of many models of experimental hypertension in rats and the pressor responses to different stimuli. Lesions of the AV3V region also reduce dipsogenic responses to angiotensin II, central cholinergic activation, water deprivation and increase in plasma osmolarity, atrial natriuretic peptide secretion produced by body fluid expansion and the increase in renal excretion to central cholinergic activation. Recent evidence also suggests the participation of AV3V region in pressor responses produced by the activation of medullary mechanisms.

Some reflections on the future of the water quality of the corumbataí River basin, São Paulo state, Brazil

The waters of Corumbataí River in the middle and eastern part of São Paulo State, Brazil, are extensively used for human consumption; their water quality has been modified mainly due to increasing pressure caused by population growth, accompanied by a more accentuated industrial development for the whole São Paulo State in the early 1970s. The Corumbataí River basin has, over time, received significant emissions of municipal waste products and discharges of wastewater, sludge, sewage, sanitary and industrial effluents, but the first effluent treatment plant at Rio Claro city was only inaugurated at the end of the 1990s. Data on river water quality from two widely spaced locations in the Corumbataí River basin are reported in this paper; they indicate the need for continuous initiatives and efforts by decision makers in order to improve and preserve the water quality in the basin for the 21st century. Copyright © 2007 IAHS Press.

Plant species identification using multi-scale fractal dimension applied to images of adaxial surface epidermis

This paper presents the study of computational methods applied to histological texture analysis in order to identify plant species, a very difficult task due to the great similarity among some species and presence of irregularities in a given species. Experiments were performed considering 300 ×300 texture windows extracted from adaxial surface epidermis from eight species. Different texture methods were evaluated using Linear Discriminant Analysis (LDA). Results showed that methods based on complexity analysis perform a better texture discrimination, so conducting to a more accurate identification of plant species. © 2009 Springer Berlin Heidelberg.

Discharge pulses of hydroelectric dams and their effects in the downstream limnological conditions: A case study in a large tropical river (SE Brazil)

To address daily fluctuations in electricity demands, the quantities of water passing through the turbines of hydropower plants can vary significantly (up to fourfold) during a 24-h cycle. This study evaluates the effects of hourly variations in water discharges on the limnological conditions observed in two below-dam river stretches. The study reservoirs, Capivara and Taquaruçu, are the 9th and 10th reservoirs in a cascade of dams in the Paranapanema River in south-east Brazil. The reservoirs exhibit different trophic conditions, water retention times, thermal regimes and spillway positions. Capivara Reservoir is deeper, meso-eutrophic, with a high water retention time and hypolimnetic discharges (32 m) varying between 500 and 1400 m3 s-1. In contrast, Taquaruçu Reservoir is relatively shallow, oligo-mesotrophic, and has a low retention time, with water discharges varying between 500 and 2000 m3 s-1. Its turbine water intake zone also is more superficial (7 m). For two periods of the year, winter and summer, profiles of limnological measurements were developed in the lacustrine (above-dam site) zones of the reservoirs, as well as in the downstream river stretches (below-dam site). In both cases, the sampling was carried out at 4-h intervals over a complete nictemeral cycle. The results demonstrated that the reservoir operating regime (water discharge variations) promoted significant differences in the conditions of the river below the dams, especially for water velocity, turbidity, and nutrient and suspended solids concentrations. The reservoir physical characteristics, including depth, thermal stratification and outlet structure, are also key factors influencing the limnology and water quality at the below-dam sampling sites. In the case of Capivara Reservoir, for example, the low dissolved oxygen concentration (<5.0 mg L-1) in its bottom water layer was transferred to the downstream river stretches during the summer. These study results demonstrated that it is important to continue such investigations as a means of verifying whether or not these high-amplitude/low-frequency variations could negatively affect the downstream river biota. © 2009 The Authors. Journal compilation © 2009 Blackwell Publishing Asia Pty Ltd.

Coupling rate measurement of a novel multi-actuated piezoelectric device using optical interferometry

The class of piezoelectric actuators considered in this paper consists of a multi-flexible structure actuated by two or more piezoceramic devices that must generate different output displacements and forces at different specified points of the domain and in different directions. The devices were modeled by finite element using the software ANSYS and the topology optimization method. The following XY actuators were build to achieve maximum displacement in the X and Y directions with a minimum crosstalk between them. The actuator prototypes are composed of an aluminum structure, manufactured by using a wire Electrical Discharge Machining, which are bonded to rectangular PZT5A piezoceramic blocks by using epoxy resin. Multi-actuator piezoelectric device displacements can be measured by using optical interferometry, since it allows dynamic measurements in the kHz range, which is of the order of the first resonance frequency of these piezomechanisms. A Michelson-type interferometer, with a He-Ne laser source, is used to measure the displacement amplitudes in nanometric range. A new optical phase demodulation technique is applied, based on the properties of the triangular waveform drive voltage applied to the XY piezoelectric nanopositioner. This is a low-phase-modulation-depth-like technique that allows the rapid interferometer auto-calibration. The measurements were performed at 100 Hz frequency, and revealed that the device is linear voltage range utilized in this work. The ratio between the generated and coupled output displacements and the drive voltages is equal to 10.97 nm/V and 1.76 nm/V, respectively, which corresponds to a 16% coupling rate. © 2010 IEEE.

Avaliação da uniformidade de aplicação de água em gotejadores em função do teor de ferro

Este trabalho teve por objetivo estudar a variação de vazão em tubogotejadores NaanPC laranja e NaanPC azul em função de precipitados químicos, ao longo do tempo de funcionamento, quando submetidos a uma água rica em ferro, avaliando-se especificamente o coeficiente de uniformidade de Christiansen (CUC) e o coeficiente de uniformidade de distribuição (CUD). O experimento foi desenvolvido em uma bancada de ensaios para tubogotejadores no Laboratório de Ensaio de Equipamentos para Irrigação do Departamento de Engenharia Rural da Faculdade de Ciências Agronômicas - UNESP, localizado no município de Botucatu – SP. O experimento foi montado em esquema fatorial 2x2x7, sendo duas doses de Fe, dois modelos de gotejadores e sete tempos de funcionamento, com três repetições, totalizando 84 parcelas experimentais. Efetuou-se a análise de variância pelo teste F. As médias das vazões dos gotejadores foram comparadas pelo teste de T de Student a 5% de probabilidade. Os resultados obtidos não apontaram diferença significativa nas diferentes doses de ferro. Entretanto, os resultados apontaram diferença significativa na interação gotejador x tempo e coeficiente de uniformidade de Christiansen (CUC).

Reduction of bacterial adhesion to biocompatible polymer surfaces via plasma processing

Plasma processing of the surfaces of biomaterials is interesting because it enables modification of the characteristics of a surface without affecting bulk properties. In addition, the results are strongly influenced by the conditions of the treatment. Therefore, by adjusting the plasma parameters it is possible to tailor the surface properties to best fulfill the requirements of a given application. In this work, polyurethane substrates have been subjected to sulfur hexafluoride glow discharge plasmas. The influences of different SF 6 plasma exposure times and pressures on the adhesion of Staphylococcus aureus and Pseudomonas aeruginosa to the polymer have been investigated. The wettability and surface free energy have been evaluated via contact angle measurements. At low pressure (6.7 Pa) the contact angle decreases with increasing exposure time in the 180 s to 540 s interval, but at higher pressure (13.3 Pa) it increases as a function of the same variable. Bacterial adhesion has been quantified from in vitro experiments by determining the growth of colonies on Petri dishes treated with agar nutrient. It has been observed that the surface properties play an important role in microbe adhesion. For instance, the density of adhered P. aeruginosa decreased as the surface contact angle increased. S. aureus preferred to adhere to hydrophobic surfaces. © 2011 by Begell House, Inc.

Toxicidade de águas e sedimentos em um rio afetado por atividades mineradoras pretéritas

The Ribeira de Iguape River basin received intense mining activities for lead exploiting and, as a result, the river received the discharges of estimated amounts of 5.5 tons/month of material rich in As, Ba, Cd, Pb, Cu, Cr and Zn. In this article, the toxicity of waters and sediments collected in Ribeira de Iguape River was assessed aiming to estimate environmental quality. Three sampling campaigns were conducted, from 2009 to 2010. Toxicity tests with the cladoceran Daphnia similis were done for water samples and for sediments, in this case using sediment-water interface exposure. Results showed in general absence of toxicity for sediments and waters, and only eventually were acute effects registered (marginal toxicity). Results are consistent with the conditions indicated by the literature, of low concentrations of metals in waters and sediments; however they differ from the monitoring made by the state environmental agency, which registered chronic toxicity. The occurrence of eventual acute toxicity indicates that although Ribeira de Iguape River quality is being restored, conditions still are not totally under control.

Subclinical muscle injuries in dogs infected with Leishmania (Leishmania) infantum chagasi

Although canine visceral leishmaniasis (CVL) has been extensively studied, muscular damage due to Leishmania (Leishmania) infantum chagasi infection remains to be fully established. The aim of this study was to describe the electromyographic and histological changes, as well as search for the presence of amastigote forms of Leishmania spp, CD3+ T-lymphocytes, macrophages and IgG in skeletal muscles of dogs with visceral leishmaniasis (VL). Four muscles (triceps brachial, extensor carpi radialis, biceps femoris and gastrocnemius) from a total of 17 naturally infected and six healthy dogs were used in this study. Electromyographic alterations such as fibrillation potentials, positive sharp waves and complex repetitive discharges were observed in, at least, three muscles from all infected dogs. Myocyte necrosis and degeneration were the most frequent muscular injury seen, followed by inflammatory reaction, fibrosis and variation in muscle fibers size. Immunohistochemistry in muscle samples revealed amastigote forms in 4/17 (23. 53%), IgG in 12/17 (70. 58%), CD3+ T-lymphocytes in 16/17 (94. 12%) and macrophages in 17/17 (100%) dogs. Statistically positive correlation was observed between: inflammatory infiltrate (p=0. 0305) and CD3+ immunoreaction (p=0. 0307) in relation to the number of amastigote forms; inflammatory infiltrate (p=0. 0101) and macrophage immunoreaction (p=0. 0127) in relation to the amount of CD3+; and inflammatory infiltrate (p=0. 0044) and degeneration/necrosis (p<0. 0001) in relation to the presence of macrophages. Our results suggest that different mechanisms contribute to the development of myocytotoxicity, including celular and humoral immune responses and direct muscular injury by the parasite. Nevertheless, the catabolic nature of the disease can probably interact with other factors, but cannot be incriminated as the only responsible for myositis.

Atmospheric plasma treatment of carbon fibers for enhancement of their adhesion properties

Plasma processing of carbon fibers (CFs) is aimed to provide better contact and adhesion between individual plies without decrease in the CF mechanical resistance. This paper deals with surface modification of CFs by an atmospheric pressure dielectric barrier discharge (DBD) for enhancing the adhesion between the CF and the polymeric matrix. The scanning electron microscopy of the treated samples revealed many small particles distributed over entire surface of the fiber. These particles are product of the fiber surface etching during the DBD treatment that removes the epoxy layer covering as-received samples. The alteration of the CF surface morphology was also confirmed by the Atomic force microscopy (AFM), which indicated that the CF roughness increased as a result of the plasma treatment. The analysis of the surface chemical composition provided by X-ray photoelectron spectroscopy showed that oxygen and nitrogen atoms are incorporated onto the surface. The polar oxygen groups formed on the surface lead to the increasing of the CF surface energy. The results of interlaminar shear strength test (short beam) of CFs/polypropylene composites demonstrated a greater shear resistance of the composites made with CFs treated by DBD than the one with untreated fibers. Both the increase in surface roughness and the surface oxidation contribute for the enhancement of CF adhesion properties. © 2012 IEEE.

Clinical and molecular study of a new form of hereditary myotonia in Murrah water buffalo

Hereditary myotonia caused by mutations in CLCN1 has been previously described in humans, goats, dogs, mice and horses. The goal of this study was to characterize the clinical, morphological and genetic features of hereditary myotonia in Murrah buffalo. Clinical and laboratory evaluations were performed on affected and normal animals. CLCN1 cDNA and the relevant genomic region from normal and affected animals were sequenced. The affected animals exhibited muscle hypertrophy and stiffness. Myotonic discharges were observed during EMG, and dystrophic changes were not present in skeletal muscle biopsies; the last 43 nucleotides of exon-3 of the CLCN1 mRNA were deleted. Cloning of the genomic fragment revealed that the exclusion of this exonic sequence was caused by aberrant splicing, which was associated with the presence of a synonymous SNP in exon-3 (c.396C>T). The mutant allele triggered the efficient use of an ectopic 5' splice donor site located at nucleotides 90-91 of exon-3. The predicted impact of this aberrant splicing event is the alteration of the CLCN1 translational reading frame, which results in the incorporation of 24 unrelated amino acids followed by a premature stop codon. Copyright © 2012 Elsevier B.V. All rights reserved.

Trigeminal neuralgia: Literature review

The trigeminal nerve, fifth equal of cranial nerves, a mixed nerve is considered by possessing motor and sensitive components. The sensitive portion takes to the Nervous System Central somesthesics information from the skin and mucous membrane of great area of the face, being responsible also for a neural disease, known as the Trigeminal Neuralgia. The aim of this study was to review the literature on the main characteristics of Trigeminal Neuralgia, the relevant aspects for the diagnosis and treatment options for this pathology. This neuralgia is characterized by hard pains and sudden, similar to electric discharges, with duration between a few seconds to two minutes, in the trigeminal nerve sensorial distribution. The pain is unchained by light touches in specific points in the skin of the face or for movements of the facial muscles, it can be caused by traumatic sequels or physiologic processes degenerative associate the vascular compression. Prevails in the senior population, frequently in the woman. In a unilateral way it attacks more the maxillary and mandibular divisions, rarely happens in a simultaneous way in the three branches of trigeminal nerve three branches.

Evaluation of metals in water and sediments of micro-basins in the city of Americana, São Paulo state, Brazil

Water pollution found in major rivers in Brazil has its origin from urban sewage discharges and industrial effluent, carried out by small streams and rivers crossing cities. Therefore, studies related to hydrographic micro-basins offer the opportunity to establish environmental management strategies for restoring water resources, based on diagnosis of the water quality. Despite this understanding, few studies in urban and rural areas have been performed in a systematic manner in Brazilian micro-basins. The main goal of this research was to diagnose the water resources in micro-basins in the region of the district of Americana, São Paulo state, Brazil, through the quantification of metals in water and sediment. The methodology was based on the investigation of metals (Ba, Cd, Cr, Cu, Fe, Mn, Ni, Pb, Zn), in four micro-basins, determined by inductively coupled plasma optical emission spectrometry (ICP-OES). The most significant result showed high concentration levels of chromium (969 μg L-1), downstream of the discharge of sewage from the city of Nova Odessa. This concentration in the river was above the allowed limit of Brazilian regulation agency (50 μg L-1 for Cr). Also high levels of Cr were found in the sediment (98.9 μg g-1) collected at the same monitored site. These results are important indicators of environmental performance and anthropogenic activities to help the government establish environmental management strategies aimed at the reduction of water pollution. © 2013 WIT Press.

The relation between structural features and electrochemical activity of MnO2 nanoparticles synthesized from a polyol-made Mn 3O4 precursor

A simple hybrid synthesis processing method was developed to synthesize γ-MnO2 nanocrystalline particles. The polyol method was modified by the addition of nitric acid in order to allow the synthesizing of single-phase Mn3O4 in a large scale. In the sequence, the acid digestion technique was used to transform Mn3O4 into γ-MnO2. Structural and morphological characterization was carried out by X-ray diffractometry, Infrared and Raman spectroscopy, thermogravimetric analysis, nitrogen adsorption isotherm, scanning electron microscopy, and transmission electron microscopy. The electrochemical properties were investigated by cyclic voltammetry and galvanostatic charge-discharge measurements. The synthesized material exhibits a specific capacitance of 125.1 F g-1 at a mass loading of 0.98 mg cm-2. The relation between structural features and electrochemical activity is discussed by comparing the synthesized material with commercial electrolytic manganese dioxide. © 2013 Springer-Verlag Berlin Heidelberg.