Performance, carcass traits and costs of Suffolk lambs finishing systems with early weaning and controlled suckling

The performance, carcass traits and finishing costs of Suffolk lambs were evaluated in three systems: (1) lambs weaned with 22 kg of body weight (BW) and supplemented with concentrate on pasture until slaughter; (2) lambs weaned with 22 kg BW and fed in feedlot until slaughter; (3) lambs maintained in controlled nursing after 22 kg BW and creep fed in feedlot until slaughter. Average daily gain (ADG) was 224 g/d for lambs weaned and supplemented with concentrate on pasture, 386 g/d for lambs weaned in feedlot and 481 g/d for lambs under controlled nursing. Empty body weight and visceral fat deposition were highest in lambs from feedlot systems. Carcass weights and carcass yields were highest for lambs in controlled nursing. Finishing total costs were highest in controlled nursing and lowest in the system with weaning in feedlot. High concentrate diet associated with controlled nursing in feedlot allowed lambs to reach the growth potential and carcasses with higher weights, higher yields and higher fat content. After weaning, lambs in feedlot fed with high concentrate diet had higher weight gain than lambs supplemented with concentrate on pasture. Carcasses produced under these two systems presented the same characteristics. The system with weaning in feedlot showed the lowest cost per kg carcass.

Die Surface Designer System

This paper defines Die Surface Designer (DSD) System for fast draw die in the product development feasibility phase on surfaces coming from styling. We propose a CAD integration, for better support the design process in industry, particularly on the development of new products in automotive sector. The DSD system intends to reduce the lead time by providing and integrating flexible and efficient capabilities for testing early concepts from surface analysis points of view in automotive product development.

Intelligent management of end consumers loads including electric vehicles through a SCADA system

The large penetration of intermittent resources, such as solar and wind generation, involves the use of storage systems in order to improve power system operation. Electric Vehicles (EVs) with gridable capability (V2G) can operate as a means for storing energy. This paper proposes an algorithm to be included in a SCADA (Supervisory Control and Data Acquisition) system, which performs an intelligent management of three types of consumers: domestic, commercial and industrial, that includes the joint management of loads and the charge/discharge of EVs batteries. The proposed methodology has been implemented in a SCADA system developed by the authors of this paper – the SCADA House Intelligent Management (SHIM). Any event in the system, such as a Demand Response (DR) event, triggers the use of an optimization algorithm that performs the optimal energy resources scheduling (including loads and EVs), taking into account the priorities of each load defined by the installation users. A case study considering a specific consumer with several loads and EVs is presented in this paper.

Residential energy resources management by a SCADA system in case of excess wind generation

The end consumers in a smart grid context are seen as active players. The distributed generation resources applied in smart home system as a micro and small-scale systems can be wind generation, photovoltaic and combine heat and power facility. The paper addresses the management of domestic consumer resources, i.e. wind generation, solar photovoltaic, combined heat and power, electric vehicle with gridable capability and loads, in a SCADA system with intelligent methodology to support the user decision in real time. The main goal is to obtain the better management of excess wind generation that may arise in consumer’s distributed generation resources. The optimization methodology is performed in a SCADA House Intelligent Management context and the results are analyzed to validate the SCADA system.

Modelling real solar cell using PSCAD/MATLAB

This paper presents the development of a solar photovoltaic (PV) model based on PSCAD/EMTDC - Power System Computer Aided Design – including a mathematical model study. An additional algorithm has been implemented in MATLAB software in order to calculate several parameters required by the PSCAD developed model. All the simulation study has been performed in PSCAD/MATLAB software simulation tool. A real data base concerning irradiance, cell temperature and PV power generation was used in order to support the evaluation of the implemented PV model.

Planeamento de curto prazo de sistemas de energia solar usando técnicas de otimização robusta

Dissertação para obtenção do grau de Mestre em Engenharia Electrotécnica

Desempenho energético no âmbito do aquecimento solar térmico para as condições de utilização recomendadas pelo RSECE/RCCTE

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Integrating early aspects with goal-oriented requirements engineering

Dissertação apresentada na Faculdade de Ciências e Tecnologia da Universidade Nova de Lisboa para obtenção do grau de Mestre em Engenharia Informática

Fractional-order impulse response of the respiratory system

This paper presents the measurement, frequency-response modeling and identification, and the corresponding impulse time response of the human respiratory impedance and admittance. The investigated adult patient groups were healthy, diagnosed with chronic obstructive pulmonary disease and kyphoscoliosis, respectively. The investigated children patient groups were healthy, diagnosed with asthma and cystic fibrosis, respectively. Fractional order (FO) models are identified on the measured impedance to quantify the respiratory mechanical properties. Two methods are presented for obtaining and simulating the time-domain impulse response from FO models of the respiratory admittance: (i) the classical pole-zero interpolation proposed by Oustaloup in the early 90s, and (ii) the inverse discrete Fourier Transform (DFT). The results of the identified FO models for the respiratory admittance are presented by means of their average values for each group of patients. Consequently, the impulse time response calculated from the frequency response of the averaged FO models is given by means of the two methods mentioned above. Our results indicate that both methods provide similar impulse response data. However, we suggest that the inverse DFT is a more suitable alternative to the high order transfer functions obtained using the classical Oustaloup filter. Additionally, a power law model is fitted on the impulse response data, emphasizing the intrinsic fractal dynamics of the respiratory system.

Detecção e quantificação automática da actividade solar

Dissertação para obtenção do grau de Mestrado Integrado em Engenharia Electrotécnica e de Computadores

Sistemas de bombagem de água utilizando energia solar fotovoltaica

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Mecânica

Otimização estocástica para a exploração de centrais de concentração solar considerando incerteza e risco

Dissertação para obtenção do grau de Mestre em Engenharia Eletrotécnica

Design and Development of a Solar Dryer for Microalgae Retrieval - An EPS@ISEP 2013 Spring Project

Currently excessive fossil fuel consumption has become a serious problem. People are searching for new solutions of energy production and there are several options to obtain alternative sources of energy without further devastating the already destroyed environment. One of these solutions is growing microalgae, from which biodiesel can be obtained. The microalgae production is a growing business because of its many useful compounds. In order to collect these compounds microalgae must first be harvested and then dried. Nowadays the solutions used for drying use too much energy and therefore are too expensive and not sustainable. The goal of this project, one of the possible choices during the EPS@ISEP 2013 Spring, was to develop a solar microalgae dryer. The multinational team involved in its development was composed of five students, from distinct countries and fields of study, and was the responsible for designing a solar microalgae dryer prototype for the microalgae laboratory of the chemical engineering department at ISEP, suitable for future tests and incorporating control process (in order not to destroy the microalgae during the drying process). The solar microalgae dryer was built to work as a distiller that gets rid of the excess water from the microalgae suspension. This paper presents a possible solution for this problem, the steps to create the device to harvest the microalgae by drying them with the use of solar energy (also used as an energy source for the solar dryer control system), the technologies used to build the solar microalgae dryer, and the benefits it presents compared to current solutions. It also presents the device from the ethical and sustainable viewpoint. Such alternative to already existing methods is competitive as far as energy usage is concerned.

Mental health promotion during pregnancy and early childhood : an action- research project in primary health care

ABSTRACT – Background: Primary Health Care (PHC) is usually the first contact with the health system, and health professionals are key mediators for enabling citizens to take care of their health. In Portugal, great improvements have been achieved in the biometric indicators of maternal and child health during the last decades. Nevertheless, scant attention has been paid to the mental health dimension, in spite of the recognition of its importance, being pregnancy and early childhood crucial opportunities in the lifecycle for mental health promotion, especially in the early years of life, with a strong impact in the health of the child. The impact of early attachment between mother and baby on maternal and child health has long been recognized. This attachment can be influenced by some factors, as the mother’s emotional adjustment. Attention to these factors may facilitate implementation of both positive conditions and preventative measures. Family support during the transition to parenthood has been highlighted as an effective measure and PHC professionals are in a privileged position as information sources as well as mediators. Aims: The project we present describes an action-research process developed together among academic researchers and health professionals to embrace these issues. We intend to enable health professionals to support families in the transition to parenthood thereby promoting children’s mental health. Approach: The project is driven by a participatory approach intended to lead to reorganization of health care during pregnancy and early childhood. Effective change happens when those involved are interested and motivated, what makes their participation so important. Reflection about current practices and needs, and knowledge about evidence-based interventions have been guiding the selection of changes to introduce in clinical practice for family support and development of parenthood skills and self-confidence. Development: We summarize the main steps in development: the initial assessment and the picture taken from the community under study; the decision making process; the training programme of PHC professionals in action; the review of the protocols of maternal consultation, home visits and antenatal education; the implementation planning; the plan for evaluation the effectiveness of the changes introduced in the delivery of maternal and child health care units. The already developed work has shown that motivation, leadership and organizational issues are decisive for process development.-------------------------- RESUMO - Os Cuidados de Saúde Primários são habitualmente o primeiro contacto com o sistema de saúde e os profissionais de saúde são mediadores chave na capacitação dos cidadãos para cuidarem da sua saúde. Em Portugal, nas últimas décadas, têm-se alcançado grandes melhorias nos indicadores biométricos de saúde materno-infantil. Contudo, tem-se dedicado pouca atenção à dimensão de saúde mental, apesar do reconhecimento da sua importância. A gravidez e primeira infância têm sido apontadas como uma oportunidade crucial no ciclo de vida para a promoção da saúde mental. É dado especial enfoque aos primeiros tempos de vida, dado o forte impacto na saúde da criança. O impacte da vinculação precoce entre a mãe e o bebé na saúde da mãe e da criança há muito que é reconhecido. Esta vinculação pode ser influenciada por vários factores, nomeadamente pelo ajustamento emocional da mãe. A focalização nestes aspectos pode facilitar a criação de condições favoráveis e a implementação de medidas preventivas. O suporte familiar durante o período de transição para a parentalidade tem sido enfatizado como uma medida eficaz e os Cuidados de Saúde Primários estão numa posição privilegiada como fontes de informação e como mediadores. O projecto que apresentamos descreve um processo de investigação- acção desenvolvido em parceria entre investigadores académicos e profissionais de saúde para abordar os aspectos referidos. Pretende-se capacitar os profissionais de saúde para apoiarem as famílias na transição para a parentalidade, promovendo assim a saúde mental das crianças. O projecto baseia-se numa abordagem participativa, direccionada para a reorganização dos cuidados durante a gravidez e primeiros tempos de vida. A mudança efectiva acontece quando os envolvidos estão interessados e motivados, o que torna a sua participação tão importante. A reflexão acerca das práticas e necessidades actuais e o conhecimento acerca de intervenções baseadas na evidência têm guiado a selecção das alterações a introduzir na prática clínica, no sentido de promover o suporte familiar e o desenvolvimento de competências parentais e auto-confiança. Neste artigo, apresentamos as etapas principais do desenvolvimento do projecto: avaliação inicial da comunidade em estudo; processo de tomada de decisão; programa de formação dos profissionais dos Cuidados de Saúde Primários; revisão dos protocolos da consulta de saúde materna, visita domiciliária e educação pré-natal; planeamento da implementação; plano de avaliação da efectividade das alterações introduzidas na prestação de cuidados. O trabalho já desenvolvido tem mostrado que a motivação, liderança e aspectos

Learning sustainability by developing a solar dryer for microalgae retrieval

The development of nations depends on energy consumption, which is generally based on fossil fuels. This dependency produces irreversible and dramatic effects on the environment, e.g. large greenhouse gas emissions, which in turn cause global warming and climate changes, responsible for the rise of the sea level, floods, and other extreme weather events. Transportation is one of the main uses of energy, and its excessive fossil fuel dependency is driving the search for alternative and sustainable sources of energy such as microalgae, from which biodiesel, among other useful compounds, can be obtained. The process includes harvesting and drying, two energy consuming steps, which are, therefore, expensive and unsustainable. The goal of this EPS@ISEP Spring 2013 project was to develop a solar microalgae dryer for the microalgae laboratory of ISEP. A multinational team of five students from distinct fields of study was responsible for designing and building the solar microalgae dryer prototype. The prototype includes a control system to ensure that the microalgae are not destroyed during the drying process. The solar microalgae dryer works as a distiller, extracting the excess water from the microalgae suspension. This paper details the design steps, the building technologies, the ethical and sustainable concerns and compares the prototype with existing solutions. The proposed sustainable microalgae drying process is competitive as far as energy usage is concerned. Finally, the project contributed to increase the deontological ethics, social compromise skills and sustainable development awareness of the students.