Quasi-experimental estimates of fiscal spillovers and spatial interactions among Brazilian cities

Nós usamos a metodologia de Regressões em Descontinuidade (RDD) para estimar o efeito causal do Fundo de Participação dos Municípios (FPM) recebido por um município sobre características dos municípios vizinhos, considerando uma variedade de temas: finanças públicas, educação, saúde e resultados eleitorais. Nós exploramos a regra que gera uma variação exógena da transferência em munícipios próximos às descontinuidades no repasse do fundo de acordo com faixas de população. Nossa principal contribuição é estimar separadamente e em conjunto o efeito spillover e o efeito direto do FPM, considerando ambos municípios vizinhos ou apenas um deles próximos às mudanças de faixa. Dessa forma, conseguimos entender melhor a interação entre municípios vizinhos quando há uma correlação na probabilidade de receber uma transferência federal. Nós mostramos que a estimativa do efeito direto do FPM sobre os gastos locais diminui em cerca de 20% quando controlamos pelo spillover do vizinho, que em geral é positivo, com exceção dos gastos em saúde e saneamento. Nós estimamos um efeito positivo da transferência sobre notas na prova Brasil e taxas de aprovação escolares em municípios vizinhos e na rede estadual do ensino fundamental. Por outro lado, o recebimento de FPM por municípios vizinhos de pequena população reduz o provimento de bens e serviços de saúde em cidades próximas e maiores, o que pode ocorrer devido à redução da demanda por serviços de saúde. A piora de alguns indicadores globais de saúde é um indício, no entanto, de que podem existir problemas de coordenação para os prefeitos reterem seus gastos em saúde. De fato, quando controlamos pela margem de vitória nas eleições municipais e consideramos apenas cidades vizinhas com prefeitos de partido diferentes, o efeito spillover é maior em magnitude, o que indica que incentivos políticos são importantes para explicar a subprovisão de serviços em saúde, por um lado, e o aumento da provisão de bens em educação, por outro. Nós também constatamos um efeito positivo do FPM sobre votos para o partido do governo federal nas eleições municipais e nacionais, e grande parte desse efeito é explicado pelo spillover do FPM de cidades vizinhas, mostrando que cidades com dependência econômica do governo federal se tornam a base de sustentação e apoio político desse governo. Por fim, nós encontramos um efeito ambíguo do aumento de receita devido ao FPM sobre a competição eleitoral nas eleições municipais, com uma queda da margem de vitória do primeiro colocado e uma redução do número de candidatos, o que pode ser explicado pelo aumento do custo fixo das campanhas locais.

HPLC-DAD methodology for the quantification of organic acids, furans and polyphenols by direct injection of wine samples

This article proposes a simple and sensitive HPLC method with photo-diode array detection for the analysis of organic acids, monomeric polyphenols and furanic compounds in wine samples by direct injection. The chromatographic separation of 8 organic acids, 2 furans and 22 phenolic compounds was carried out with a buffered solution (pH 2.70) and acetonitrile as mobile phases and a difunctionally bonded C18 stationary phase, Atlantis dC18 (250 4.6 mm, 5mm) column. The elution was performed in 12 min for the organic acids and in 60 min for the phenolic compounds, including phenolic acids, stilbenes and flavonoids. Target compounds were detected at 210 nm (organic acids, flavan-3-ols and benzoic acids), 254 nm (ellagic acid), 280 nm (furans and cinnamic acid), 315 nm (hydroxycinnamic acids and trans-resveratrol) and 360 nm (flavonoids). The RSD for the repeatability test (n55) of peak area and retention times were below 3.1 and 0.3%, respectively, for phenolics and below 1.0 and 0.2% for organic acids. The RSDs expressing the reproducibility of the method were higher than for the repeatability results but all below 9.0%. Method accuracy was evaluated by the recovery results, with averaged values between 80 and 104% for polyphenols and 97–105% for organic acids. The calibration curves, obtained by triplicate injection of standard solutions, showed good linearity with regression coefficients higher than 0.9982 for polyphenols and 0.9997 for organic acids. The LOD was in the range of 0.07–0.49 mg/L for polyphenols (cinnamic and gallic acids, respectively) and 0.001–0.046 g/L for organic acids (oxalic and lactic acids, respectively). The method was successfully used to measure and assess the polyphenolic fingerprint and organic acids profile of red, white, rose ´ and fortified wines.

A descentralização das políticas de desenvolvimento rural: uma análise da experiência do Rio Grande do Norte

MATOS FILHO, João. A descentralização das Políticas de desenvolvimento rural - uma análise da experiência do Rio Grande do Norte. 2002. 259f. Tese (Doutorado em Ciências Econômicas)– Instituto de Economia da Universidade Estadual de Campinas, Campinas, 2002.

Desenvolvimento, pobreza e meio ambiente no seridó potiguar: um estudo centrado nas micro-regiões do seridó oriental e ocidental

This research work intends to carry out a study focused on the dynamic between development, poverty reduction and conservation of natural resources. To consider this relationship to the region chosen was the micro-region of Eastern and Western Seridó in the state of Rio Grande do Norte. In recent years, several studies (Araújo, 2011; BASTOS, 2009) have pointed out that after a period of economic crisis in its tripodproductive, formed by the activities of farming, cotton farming, mining and faced in the eighties, this region of the State of Rio Grande do Norte, has not only shown signs of economic recovery but also improve their social indicators. On the other hand, studies of desertification as the view of the state of RN (produced in cooperation between the Government of RN and research institutions) and the Sustainable Development Plan of Seridó (ADES, 2000), indicate that there is an ongoing French process of degradation of natural resources that is capable of compromising the ability of sustaining such a system. To verify this reality and likely finding this relationship, this work is adopted for this study, the analysis of evolution of secondary data from official bodies such as the IBGE on HDI, per capita income and other social indicators between 2000 and 2009. Here is another time of the survey analysis of qualitative data collected from interviews with institutions of academic intervention in nature, researchers at the Federal University of Rio Grande do Norte (UFRN) State agencies that address the issue of the Middle Environment in Seridó: Institute for Sustainable Development of the NB (IDEMA) and the Brazilian Institute of Environment and the Amazon (IBAMA) and institutions of direct intervention in the region, as the Agency's Sustainable Development Seridó (adhesive) and the Joint Semi-Arid (ASA). After crossing data from quantitative and qualitative, it was found that the dynamics of the region's economic Seridó Potiguar partially answers the improvement of social indicators of poverty. Contribution by the State in this shared stock transfer income. Regarding the influence of productive restructuring in the region on issues of environment, it is noted that the ceramic tile industry, responsible for the absorption percentage of the population with limited ingress into the urban economy, given the low education, accounts for the increase of susceptibility to the ongoing process of desertification in North Seridó Rio Grande. We conclude finally that the guarantee of increased income, freedom and conservation of natural resources ensures primarily by changing the beliefs and values, especially on the part of the business sector, which use natural resources so predatory, aimed at maintaining their rates of return on investment. And concomitantly, the synchronization between technological change, through the use of new energy sources, and institutional change.

Controle feedback de nível baseado em sensor de imagem aplicado ao equipamento misturador-decantador à inversão de fases (MDIF®)

The treatment of wastewaters contaminated with oil is of great practical interest and it is fundamental in environmental issues. A relevant process, which has been studied on continuous treatment of contaminated water with oil, is the equipment denominated MDIF® (a mixer-settler based on phase inversion). An important variable during the operation of MDIF® is the water-solvent interface level in the separation section. The control of this level is essential both to avoid the dragging of the solvent during the water removal and improve the extraction efficiency of the oil by the solvent. The measurement of oil-water interface level (in line) is still a hard task. There are few sensors able to measure oil-water interface level in a reliable way. In the case of lab scale systems, there are no interface sensors with compatible dimensions. The objective of this work was to implement a level control system to the organic solvent/water interface level on the equipment MDIF®. The detection of the interface level is based on the acquisition and treatment of images obtained dynamically through a standard camera (webcam). The control strategy was developed to operate in feedback mode, where the level measure obtained by image detection is compared to the desired level and an action is taken on a control valve according to an implemented PID law. A control and data acquisition program was developed in Fortran to accomplish the following tasks: image acquisition; water-solvent interface identification; to perform decisions and send control signals; and to record data in files. Some experimental runs in open-loop were carried out using the MDIF® and random pulse disturbances were applied on the input variable (water outlet flow). The responses of interface level permitted the process identification by transfer models. From these models, the parameters for a PID controller were tuned by direct synthesis and tests in closed-loop were performed. Preliminary results for the feedback loop demonstrated that the sensor and the control strategy developed in this work were suitable for the control of organic solvent-water interface level

Experimental performance of a direct evaporative cooler operating during summer in a Brazilian city

This paper presents the basic principles of the evaporative cooling process for human thermal comfort, the principles of operation for the direct evaporative cooling system and the mathematical development of the equations of thermal exchanges, allowing the determination of the effectiveness of saturation. It also presents the results of experimental tests in a direct evaporative cooler that take place in the Air Conditioning Laboratory at the University of Taubate Mechanical Engineering Department, and the experimental results are used to determinate the convective heat transfer co-efficient and to compare with the mathematical model. (c) 2005 Elsevier Ltd and IIR. All rights reserved.

Single-embryo transfer reduces clinical pregnancy rates and live births in fresh IVF and Intracytoplasmic Sperm Injection (ICSI) cycles: a meta-analysis

Background: It has become an accepted procedure to transfer more than one embryo to the patient to achieve acceptable ongoing pregnancy rates. However, transfers of more than a single embryo increase the probability of establishing a multiple gestation. Single-embryo transfer can minimize twin pregnancies but may also lower live birth rates. This meta-analysis aimed to compare current data on single-embryo versus double-embryo transfer in fresh IVF/ICSI cycles with respect to implantation, ongoing pregnancy and live birth rates.Methods: Search strategies included on-line surveys of databases from 1995 to 2008. Data management and analysis were conducted using the Stats Direct statistical software. The fixed-effect model was used for odds ratio (OR). Fixed-effect effectiveness was evaluated by the Mantel Haenszel method. Seven trials fulfilled the inclusion criteria.Results: When pooling results under the fixed-effect model, the implantation rate was not significantly different between double-embryo transfer (34.5%) and single-embryo transfer group (34.7%) (P = 0.96; OR = 0.99, 95% CI 0.78, 1.25). on the other hand, double-embryo transfer produced a statistically significantly higher ongoing clinical pregnancy rate (44.5%) than single-embryo transfer (28.3%) (P < 0.0001; OR: 2.06, 95% CI = 1.64,2.60). At the same time, pooling results presented a significantly higher live birth rate when double-embryo transfer (42.5%) (P < 0.001; OR: 1.87, 95% CI = 1.44,2.42) was compared with single-embryo transfer (28.4%).Conclusion: Meta-analysis with 95% confidence showed that, despite similar implantation rates, fresh double-embryo transfer had a 1.64 to 2.60 times greater ongoing pregnancy rate and 1.44 to 2.42 times greater live birth rate than single-embryo transfer in a population suitable for ART treatment.

Detection and transfer of antimicrobial resistance gene integron in Salmonella Enteritidis derived from avian material

The expansion of global poultry production has increased the need to reduce or control the agents responsible for economic losses, including Salmonella spp. These bacteria are also of public health concern due to their potential to cause food poisoning, and, more recently, due to the antimicrobial resistance presented by these bacteria. Molecular biology is an important tool currently used in the diagnosis and research studies of main poultry diseases. The present studied analyzed 100 samples of Salmonella Enteritidis (SE) isolated from avian material aiming at detecting the class 1 integron gene, Integroninvolved in antimicrobial resistance, by means of polymerase chain reaction (PCR), and comparing it with plate inhibition test. Subsequently, SE samples were evaluated for their capacity to horizontally transfer this gene. There was no direct relationship between the presence of the class 1 integron gene and SE resistance to the 14 antimicrobials tested, as 80% of the studied samples were resistant to up to three antimicrobials, and did not present the aforementioned gene. However, horizontal transfer of this gene was accomplished in vitro (from Escherichia coli to Salmonella Enteritidis), demonstrating that capacity class 1 integron gene can be disseminated among enterobacteria.

Ytterbium-induced energy-transfer upconversion enhancement in Nd3+/Pr3+-codoped PbGeO3-PbF2-CdF2 glass excited at 810nm

The effect of ytterbium ions upon energy transfer (ET) excited upconversion emission in Nd3+/Pr3+ -codoped PbGeO3-PbF2-CdF2 glass under 810 nm diode laser excitation is investigated. The results revealed that the presence of Yb3+ ions in the Nd3+/Pr3+-doped sample yields a fourfold enhancement in the visible and near infrared upconversion luminescence. The dependence of the upconversion process upon the excitation power, Nd3+, and Yb3+ concentrations is examined. The results indicated that ytterbium plays a major role in the ET upconversion process by bridging the 810nm neodymium excitation to praseodymium ions. The population of the Pr3+ ions P-3(0) emitting level was accomplished through a multi-ion interaction involving ground-state and excited-state absorption of pump photons at 810 nm by the Nd3+ followed by successive ET involving the Nd3+-Yb3+ and Yb3+-Pr3+ pairs. There is also direct ET Nd3+-Pr3+. (c) 2005 Elsevier B.V. All rights reserved.

Tungsten permanent chemical modifier with co-injection of Pd(NO3)(2)+Mg(NO3)(2) for direct determination of Pb in vinegar by graphite furnace atomic absorption spectrometry

A tungsten carbide coating on the integrated platform of a transversely heated graphite atomizer (THGA((R))) used together with Pd(NO3)(2) + Mg(NO3)(2) as modifier is proposed for the direct determination of lead in vinegar by graphite furnace atomic absorption spectrometry. The optimized heating program (temperature, ramp time, hold time) of atomizer involved drying stage (110 degrees C, 5 s, 30 s; 130 degrees C, 5 s, 30 s), pyrolysis stage (1000 degrees C, 15 s, 30 s), atomization stage (1800 degrees C, 0 s, 5 s) and clean-out stage (2450 degrees C, I s, 3 s). For 10 mu L of vinegar delivered into the atomizer and calibration using working standard solutions (2.5-20.0 mu g L-1 Pb) in 0.2% (v/v) HNO3, analytical curve with good linear correlation (r = 0.9992) was established. The characteristic mass was 40 pg Pb and the lifetime of the tube was around 730 firings. The limit of detection (LOD) was 0.4 mu g L-1 and the relative standard deviations (n = 12) were typically <8% for a sample containing 25 pg L-1 Pb. Accuracy of the proposed method was checked after direct analysis of 23 vinegar samples. A paired t-test showed that results were in agreement at 95% confidence level with those obtained for acid-digested vinegar samples. The Pb levels varied from 2.8 to 32.4 pg L-1. Accuracy was also checked by means of addition/recovery tests and recovered values varied from 90% to 110%. Additionally, two certified reference materials were analyzed and results were in agreement with certified values at a 95% confidence level. (C) 2006 Elsevier Ltd. All rights reserved.

Direct determination of Al, As, Cu, Fe, Mn, and Ni in fuel ethanol by simultaneous GFAAS using integrated platforms pretreated with W-Rh permanent modifier together with Pd plus Mg modifier

A method is proposed for the simultaneous determination of Al, As, Cu, Fe, Mn, and Ni in fuel ethanol by electrothermal atomic absorption spectrometry (ETAAS) using W-Rh permanent modifier together with Pd(NO3)(2) + Mg(NO3)(2) conventional modifier. The integrated platform of a transversely heated graphite atomizer (THGA) was treated with tungsten, followed by rhodium, forming a deposit containing 250 mug W + 200 mug Rh. A 500-muL, volume of fuel ethanol was diluted with 500 muL, of 0.14 mol L-1 HNO3 in an autosampler cup of the spectrometer. Then, 20 muL, of the diluted ethanol was introduced into the pretreated graphite platform followed by the introduction of 5 mug Pd(NO3)(2) + 3 mug Mg(NO3)(2). The injection of this modifier was required to improve arsenic and iron recoveries in fuel ethanol. Calibrations were carried out using multi-element reference solutions prepared in diluted ethanol (1 + 1, v/v) acidified to 0. 14 mol L-1 HNO3. The pyrolysis and atomization temperatures of the heating program were 1200degreesC and 2200degreesC, respectively, which were obtained with multielement reference solutions in acidic diluted ethanol (1 + 1, v/v; 0. 14 mol L-1 HNO3). The characteristic masses for the simultaneous determination in ethanol fuel were 78 pg Al, 33 pg As, 10 pg Cu, 14 pg Fe, 7 pg Mn, and 24 pg Ni. The lifetime of the pretreated tube was about 700 firings. The detection limits (D.L.) were 1.9 mug L-1 Al, 2.9 mug L-1 As, 0.57 mug L-1.Cu, 1.3 mug L-1 Fe, 0.40 mug L-1 Mn, and 1.3 mug L-1 Ni. The relative standard deviations (n = 12) were 4%, 4%, 3%, 1.5%, 1.2%, and 2.2% for Al, As, Cu, Fe, Mn, and Ni, respectively. The recoveries of Al, As, Cu, Fe, Mn, and Ni added to the fuel ethanol samples varied from 81% to 95%, 80% to 98%, 97% to 109%, 85% to 107%, 98% to 106% and 97% to 103%, respectively. Accuracy was checked for the Al, As, Cu, Fe, Mn, and Ni determination in 10 samples purchased at a local gas station in Araraquara-SP City, Brazil. A paired t-test showed that at the 95% confidence level the results were in agreement with those obtained by single-element ETAAS.

Mudança de concepção das políticas públicas para o campo brasileiro: o Programa de Aquisição de Alimentos, PAA

In the 90, the public politics for the Brazilian rural way incorporated the territorial perspective, besides they motivate the participation and the beneficiaries collective organization. In 2003 the Food Acquisition Program (FAP) was created with the intention of guaranteeing the feeding of people in social vulnerability situation or alimentary insecurity and of providing work and income in the field through the direct buying of the agriculturists foods. In a research made in two São Paulo State's towns: Tupi Paulista and Dracena, it was verified that the price paid to the farmers is higher to the regional average and because of this fact the participants have interest in enlarging the cultivated area and/or in diversifying the cultivations. Though, two problems were detected: 1) the reduced number of beneficiated producers; and, ii) the furtherance of the producers relatives already registered that try to increase their quota of products and the value to be received.

Evaluation of transfer impressions for osseointegrated implants at various angulations

The accuracy of impressions that transfer the relationship of the implant to the metal framework of the prosthesis continues to be a problem. This study was designed to evaluate the accuracy of the transfer process under variable conditions with regard to implant analog angulations, impression materials, and techniques. Replicas (n = 60) of a metal matrix (control) containing four implants at 90°, 80°, 75°, and 65° in relation to the horizontal surface were obtained by using three impression techniques: T1 - indirect technique with conical copings in closed trays; T2 - direct technique with square copings in open trays; and T3 - square copings splinted with autopolymerizing acrylic resin; and four elastomers: P-polysulfide; I-polyether; A-addition silicone; and Z-condensation silicone. The values of the implant analog annulations were assessed by a profilometer to the nearest 0.017°, then submitted to analysis of variance for comparisons at significance of 5% (P < .05). For implant analog at 90°, the material A associated with T2 and material Z with T3 behaved differently (P < .05) from all groups. At 80°, all materials behaved differently (P < .01) with T1. At 75°, when T1 was associated, materials P and A showed similar behavior, as well as materials I and Z; however, P and A were different from I and Z (P < .01). When T3 was associated, all experimental groups behaved differently among them (P < .01). At 65°, the materials P and Z behaved differently (P < .01) from the control group with T1, T2, and T3; the materials I and A behaved differently from the control group (P < .01) when T1 and T2, respectively, were associated. The more perpendicular the implant analog annulation is in relation to the horizontal surface, the more accurate the impression. The best materials were material I and A and the most satisfactory technique was technique 3.

Profitability measures of dairy cows

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Accuracy of impression techniques for implants. Part 1 - Influence of transfer copings surface abrasion

Purpose: This study evaluated the influence of surface abrasion of transfer copings to obtain a precise master cast for a partially edentulous restoration with different inclinations. Materials and Methods: Replicas (N = 30) of a metal matrix (control group) containing two implants at 90° and 65° in relation to the benchtop were obtained using a polyether impression material and three impression techniques: square impression copings splint with dental floss and autopolymerizing acrylic resin (TRS), square impression copings abraded with aluminum oxide (TA), and square impression copings abraded with aluminum oxide and adhesive-coated (TAA). The replicas obtained in type V stone were digitalized, and the images were exported to AutoCAD software to perform the readings of possible degree alterations in implant inclinations. The results were submitted to analysis of variance (ANOVA) and Tukey test (α < 0.05). Results: Comparing the techniques with regard to the 90° implant inclination, no statistical difference was observed between the three techniques and the control group. Analyzing the three techniques with regard to the 65° implant inclination, no significant difference was seen between technique TA and the control group. Conclusions: Technique TA presented more accurate master casts than TRS and TAA techniques. The angulated implant (65°) tended to generate more imprecise master casts than implants perpendicular to the surface. © 2008 by The American College of Prosthodontists.