Stability of a nanofiltration membrane after contact with a low-level liquid radioactive waste

This study investigated the treatment of a liquid radioactive waste containing uranium (235U + 238U) using nanofiltration membranes. The membranes were immersed in the waste for 24-5000 h, and their transport properties were evaluated before and after the immersion. Surface of the membranes changed after immersion in the waste. The SW5000 h specimen lost its coating layer of polyvinyl alcohol, and its rejection of sulfate ions and uranium decreased by about 35% and 30%, respectively. After immersion in the waste, the polyamide selective layer of the membranes became less thermally stable than that before immersion.

Powdery mildew of ornamental species caused by Oidiopsis haplophylli in Brazil

Oidiopsis haplophylli (syn. Oidiopsis sicula) was identified as the causal agent of powdery mildew diseases occurring on five ornamental species in Brazil. This disease was observed in plastic house-grown lisianthus (Eustoma grandiflorum: Gentianaceae), in nasturtium (Tropaeolum majus: Tropaeolaceae) cultivated under open field conditions and in greenhouse-grown calla lily (Zantedeschia aethiopica: Araceae), impatiens (Impatiens balsamina: Balsaminaceae) and balloon plant (Asclepias physocarpa: Asclepiadaceae). Typical disease symptoms consisted of chlorotic areas on the upper leaf surface corresponding to a fungal colony in the abaxial surface. With the disease progression, these chlorotic areas eventually turned to necrotic (brown) lesions. Fungi morphology on all hosts was similar to that described for the imperfect stage of Leveillula taurica (O. haplophylli). The Koch's postulates were fulfilled by inoculating symptom-free plants via leaf-to-leaf contact with fungal colonies. Additional inoculations using an isolate of O. haplophylli from sweet pepper (Capsicum annuum) demonstrated that it is pathogenic to all five species belonging to distinct botanical families, indicating lack of host specialization. This is the first formal report of a powdery mildew disease on lisianthus, calla lilly, impatiens and nasturtium in Brazil. It is, to our knowledge, the first report of O. haplophyllii infecting A. physocarpa, extending the host range of this atypical powdery mildew-inducing fungus. This disease might become important on these ornamental crops especially in protected cultivation and also under field conditions in hot and dry areas of Brazil.

Mathematical model to estimate of the deterioration of wooden poles in contact with soil used in rural areas

In São Paulo State, mainly in rural areas, the utilization of wooden poles is observed for different purposes. In this context, wood in contact with the ground presents faster deterioration, which is generally associated to environmental factors and, especially to the presence of fungi and insects. With the use of mathematical models, the useful life of wooden structures can be predicted by obtaining "climatic indexes" to indicate, comparatively among the areas studied, which have more or less tendency to fungi and insects attacks. In this work, by using climatological data of several cities at São Paulo State, a simplified mathematical model was obtained to measure the aggressiveness of the wood in contact with the soil.

Distribution pattern, surface tension and contact angle of herbicides associated to adjuvants on spraying and control of Ipomoea hederifolia under rainfall incidence

ABSTRACTScarlet Morning Glory is considered to be an infesting weed that affects several crops and causes serious damage. The application of chemical herbicides, which is the primary control method, requires a broad knowledge of the various characteristics of the solution and application technology for a more efficient phytosanitary treatment. Therefore this study aimed to characterize the effect of rainfall incidence on the control of Ipomoea hederifolia, considering droplet size, surface tension, contact angle of droplets formed by herbicides liquid on vegetal and artificial surfaces, associated to adjuvants and the volumetric distribution profile of the spray jet. The addition of the adjuvants to the herbicide spraying liquid improved the application quality, as it influenced the angle formed by the spray by broadening the deposition band of the spray nozzle and thus the possible distance between the nozzles on spray boom and due the changes at droplet size, which contribute to a safety application. The rainfall occurrence affected negatively the weed control with the different spraying liquids and also the dry matter weight, suggesting that the phytosanitary product applied was washed off.

Assessment of pelvic floor by three-dimensional-ultrasound in primiparous women according to delivery mode: initial experience from a single reference service in Brazil

PURPOSE: To evaluate changes to the pelvic floor of primiparous women with different delivery modes, using three-dimensional ultrasound. METHODS: A prospective cross-sectional study on 35 primiparae divided into groups according to the delivery mode: elective cesarean delivery (n=10), vaginal delivery (n=16), and forceps delivery (n=9). Three-dimensional ultrasound on the pelvic floor was performed on the second postpartum day with the patient in a resting position. A convex volumetric transducer (RAB4-8L) was used, in contact with the large labia, with the patient in the gynecological position. Biometric measurements of the urogenital hiatus were taken in the axial plane on images in the rendering mode, in order to assess the area, anteroposterior and transverse diameters, average thickness, and avulsion of the levator ani muscle. Differences between groups were evaluated by determining the mean differences and their respective 95% confidence intervals. The proportions of levator ani muscle avulsion were compared between elective cesarean section and vaginal birth using Fisher's exact test. RESULTS: The mean areas of the urogenital hiatus in the cases of vaginal and forceps deliveries were 17.0 and 20.1 cm², respectively, versus 12.4 cm² in the Control Group (elective cesarean). Avulsion of the levator ani muscle was observed in women who underwent vaginal delivery (3/25), however there was no statistically significant difference between cesarean section and vaginal delivery groups (p=0.5). CONCLUSION: Transperineal three-dimensional ultrasound was useful for assessing the pelvic floor of primiparous women, by allowing pelvic morphological changes to be differentiated according to the delivery mode.

Evaluation of skin sensitivity in dogs bearing allergic dermatitis to standardized allergenic extract of house dust and storage mites

The objective of the study was to evaluate whether allergenic extracts of five house dust and storage mite species standardized for humans might be used for the diagnosis of canine atopic dermatitis (CAD). Extracts of Dermatophagoides pteronyssinus (Pyroglyphidae), D. farinae (Pyroglyphidae), Blomia tropicalis (Glycyphagidae), Lepidoglyphus destructor (Glycyphagidae) and Tyrophagus putrescentiae (Acaridae) were evaluated by intradermal testing in 20 healthy dogs (control) and 25 dogs with allergic dermatitis. A significant difference in the response was observed between the two groups (p<0.05). Only one dog (5%) in the control group reacted to the intradermal test, whereas 14 dogs (56%) in the allergic group were positive for at least one extract (odds ratio = 24.2). Most of the positive reactions observed in the allergic group occurred against the extracts of T. putrescentiae or L. destructor, each inducing reactions in 10 dogs (40%). D. farinae, D. pteronyssinus e B. tropicalis extracts induced reactions in 7 (28%), 3 (12%) and 3 (12%) dogs, respectively. The allergenic extracts standardized for humans evaluated in the present study may be used as a tool to complement the diagnosis of the disease, as well as to select potential allergen candidates for allergen-specific immunotherapy.

Sheep poisoning by Panicum dichotomiflorum in northeastern Brazil

Different species of Panicum, including P. dichotomiflorum,have been reported as a cause of photosensitization in sheep, horses, cattle and goats. An outbreak of hepatogenous photosensitization occurred in 3 flocks of hair sheep in the Brazilian semiarid region. Eighty one out of 365 sheep were affected and 39 died. The main affected animals were nursing lambs and sheep younger than one year old. Donkeys, goats and cattle grazing in the same pasture were not affected. Clinical signs were edema of the head, followed by dermatitis, mainly in the face, ears, and croup, ocular discharge, corneal opacity with blindness, and redness of the coronary band and hoof. At necropsy of one affected lamb the liver was yellowish. Upon histologic examination scattered necrotic hepatocytes were observed in the liver and focal areas of necrosis of myocytes appeared in the heart. Samples of P. dicotomiflorum were analyzed by TLC and those containing saponins were isolated by HPLC using RP-C18 column and eluted with a mixture of MeOH and H2O. The isolated compounds were submitted to ¹H and 13C NMR spectroscopy. Reactions were positive to furostanol saponins with the same Rf of the standard protodioscin (0.21) and methylprotodioscin (0.32). The spectroscopic results indicated a mixture of (25R)- and (25S)-protodioscin isomers in a proportion of 3:1, and methylprotodioscin.

Animal infections by vaccinia-like viruses in the state of Rio de Janeiro: an expanding disease

In the present study we investigated the presence of infections by vaccinia-like viruses in dairy cattle from 12 counties in the state of Rio de Janeiro in the last 9 years. Clinical specimens were collected from adult animals with vesicular/pustular lesions mainly in the udder and teats, and from calves with lesions around the nose and mouth. A plaque reduction neutralization test (PRNT) was applied to search for antibodies to Orthopoxvirus; the vesicular/pustular fluids and scabs were examined by PCR, electron microscopy (EM) and by inoculation in VERO cells for virus isolation. Antibodies to Orthopoxvirus were detected in most cases. The PCR test indicated a high nucleotide homology among the isolates and the vaccinia viruses (VACV) used as controls. By EM, typical orthopoxvirus particles were observed in some specimens. The agents isolated in tissue culture were confirmed as vaccinia-like viruses by EM and PCR. The HA gene of the vaccinia-like Cantagalo/IOC virus isolated in our laboratory was sequenced and compared with other vaccinia-like isolates, showing high homology with the original Cantagalo strain, both strains isolated in 1999 from dairy cattle. Antibodies to Orthopoxvirus were detected in one wild rodent (genus Akodon sp.) collected in the northwestern region of the state, indicating the circulation of poxvirus in this area. Nonetheless, PCR applied to tissue samples collected from the wild rodents were negative. Vesicular/pustular lesions in people in close contact with animals have been also recorded. Thus, the vaccinia-like virus infections in cattle and humans in the state seem to be an expanding condition, resulting in economic losses to dairy herds and leading to transient incapacitating human disease. Therefore, a possible immunization of the dairy cattle in the state should be carefully evaluated.

Digital dermatitis of the accessory digits of dairy cows

This report characterizes the digital dermatitis (DD) lesions in the accessory digits of dairy cows and presents data on the applied therapy. Fifteen Holstein cattle with DD affecting the accessory digits of the hindlimbs from four dairy farms with previous history of DD were evaluated. Lesions were excised, the wounds were sutured, and a topical application of oxytetracycline powder covered by bandaging was associated with a single parenteral administration of long acting oxytetracycline IM (20mg/kg). Tissue samples were obtained for histopathology and transmission electronic microscopy (TEM). Lesions from all the animals were recuperated 15 days after surgical procedure. Overal, most DD lesions were papillomatous epidermal projections or wartlike verrucous lesions. Histopathologically, samples revealed hyperplasia of epidermis with hyperkeratosis, several mitoses in the stratum basale and elongated rete ridges in the superficial and middle dermis. TEM revealed long, thin spirochete-like bacteria. Morphologic features of lesions and its response to therapy were comparable to those described for DD.

Side peaks in Nb and NbTi point-contact spectra

Superconductor – normal metal point contacts were investigated, using different combinations of Cu, brass, Nb and NbTi. The resulting spectra contained side peaks. The currents at which these side peaks appeared, depended on the radii of the contacts. For contacts with Nb this dependence was quadratic, while for contacts with NbTi it was linear. Based on this, we argue that the side peaks in the case of the Nb contacts are due to the critical current density being exceeded. In contrast, side peaks of the NbTi contacts are caused by the self-magnetic field exceeding the lower critical field of NbTi. The NbTi contacts did not show the expected contribution from the vanishing Maxwell resistance of the superconductor, a question which remained open.

A Soft Contact Collision Method For Real-Time Simulation of Triangularized Geometries in Multibody Dynamics

When modeling machines in their natural working environment collisions become a very important feature in terms of simulation accuracy. By expanding the simulation to include the operation environment, the need for a general collision model that is able to handle a wide variety of cases has become central in the development of simulation environments. With the addition of the operating environment the challenges for the collision modeling method also change. More simultaneous contacts with more objects occur in more complicated situations. This means that the real-time requirement becomes more difficult to meet. Common problems in current collision modeling methods include for example dependency on the geometry shape or mesh density, calculation need increasing exponentially in respect to the number of contacts, the lack of a proper friction model and failures due to certain configurations like closed kinematic loops. All these problems mean that the current modeling methods will fail in certain situations. A method that would not fail in any situation is not very realistic but improvements can be made over the current methods.

Serological identification of house dust mite allergens in dogs with atopic dermatitis

House dust mite antigens have been used for decades to diagnose allergic diseases in humans and animals. The objective of this study was to identify allergens in commercial Dermatophagoides farinae and Blomia tropicalis extracts by immunoblotting using sera from allergic dogs and anti-dog IgE conjugate. The analysis of antigens present in the D. farinae extract (FDA Allergenic) using sera from 10 dogs allergic to D. farinae showed that eight sera recognized a band of approximately 102 kDa, eight recognized two bands of 52 to 76 kDa, five recognized one band of approximately 76 kDa, four recognized one band of 31 to 38 kDa, and two recognized one band of 12 to 17 kDa. Immunoblot assays of the B. tropicalis extract (FDA Allergenic) using sera from 10 animals allergic to B. tropicalis showed that five sera recognized two bands of 52 to 76 kDa. These results demonstrate the importance of the two house dust mite species for the pathogenesis of canine atopic dermatitis in Brazil. In addition, the results indicate which allergens should be present in allergenic extracts used for diagnosis and allergen-specific immunotherapy.

NaOCl effect on biofilm produced by Staphylococcus aureus isolated from the milking environment and mastitis infected cows

Biofilms constitute a physical barrier, protecting the encased bacteria from detergents and sanitizers. The objective of this work was to analyze the effectiveness of sodium hypochlorite (NaOCl) against strains of Staphylococcus aureus isolated from raw milk of cows with subclinical mastitis and Staphylococcus aureus isolated from the milking environment (blowers and milk conducting tubes). The results revealed that, in the presence of NaOCl (150ppm), the number of adhered cells of the twelve S. aureus strains was significantly reduced. When the same strains were evaluated in biofilm condition, different results were obtained. It was found that, after a contact period of five minutes with NaOCl (150ppm), four strains (two strains from milk , one from the blowers and one from a conductive rubber) were still able to grow. Although with the increasing contact time between the bacteria and the NaOCl (150ppm), no growth was detected for any of the strains. Concerning the efficiency of NaOCl on total biofilm biomass formation by each S. aureus strain, a decrease was observed when these strains were in contact with 150 ppm NaOCl for a total period of 10 minutes. This study highlights the importance of a correct sanitation protocol of all the milk processing units which can indeed significantly reduce the presence of microorganisms, leading to a decrease of cow´s mastitis and milk contamination.

Additional information about a mange outbreak by Allopsoroptoides galli (Acari: Psoroptoididae) in commercial laying hens in the state of São Paulo, Brazil

This paper reports additional information about a mange outbreak by the mite Allopsoroptoides galli in a commercial egg-laying hen facility in the state of São Paulo, Brazil. About half of the 76,000 multi-age birds of the flock were affected. Experimental infestations carried out on naive hens resulted in clinical signs similar to those diagnosed in naturally infested hens, such as generalized scaly dermatitis, presence of mucus-like material and yellowish crusts on the skin and around the calami, feather loss and strong unpleasant odor. About 30% drop of egg production was estimated. The possible source of infestation were wild birds identified on the ground and roofs of the sheds.

Contact with friction using the augmented Lagrangian Method: a conditional constrained minimization problem

This work presents a formulation of the contact with friction between elastic bodies. This is a non linear problem due to unilateral constraints (inter-penetration of bodies) and friction. The solution of this problem can be found using optimization concepts, modelling the problem as a constrained minimization problem. The Finite Element Method is used to construct approximation spaces. The minimization problem has the total potential energy of the elastic bodies as the objective function, the non-inter-penetration conditions are represented by inequality constraints, and equality constraints are used to deal with the friction. Due to the presence of two friction conditions (stick and slip), specific equality constraints are present or not according to the current condition. Since the Coulomb friction condition depends on the normal and tangential contact stresses related to the constraints of the problem, it is devised a conditional dependent constrained minimization problem. An Augmented Lagrangian Method for constrained minimization is employed to solve this problem. This method, when applied to a contact problem, presents Lagrange Multipliers which have the physical meaning of contact forces. This fact allows to check the friction condition at each iteration. These concepts make possible to devise a computational scheme which lead to good numerical results.