Phonon anharmonicity and negative thermal expansion in SnSe

The anharmonic phonon properties of SnSe in the Pnma phase were investigated with a combination of experiments and first-principles simulations. Using inelastic neutron scattering (INS) and nuclear resonant inelastic X-ray scattering (NRIXS), we have measured the phonon dispersions and density of states (DOS) and their temperature dependence, which revealed a strong, inhomogeneous shift and broadening of the spectrum on warming. First-principles simulations were performed to rationalize these measurements, and to explain the previously reported anisotropic thermal expansion, in particular the negative thermal expansion within the Sn-Se bilayers. Including the anisotropic strain dependence of the phonon free energy, in addition to the electronic ground state energy, is essential to reproduce the negative thermal expansion. From the phonon DOS obtained with INS and additional calorimetry measurements, we quantify the harmonic, dilational, and anharmonic components of the phonon entropy, heat capacity, and free energy. The origin of the anharmonic phonon thermodynamics is linked to the electronic structure.

The effects of formulation and processing on surface characteristics and functional properties of dairy powders

The objectives of this thesis were to (i) study the effect of increasing protein concentration in milk protein concentrate (MPC) powders on surface composition and sorption properties; (ii) examine the effect of increasing protein content on the rehydration properties of MPC; (iii) study the physicochemical properties of spraydried emulsion-containing powders having different water and oil contents; (iv) analyse the effect of protein type on water sorption and diffusivity properties in a protein/lactose dispersion, and; (v) characterise lactose crystallisation and emulsion stability of model infant formula containing intact or hydrolysed whey proteins. Surface composition of MPC powders (protein contents 35 - 86 g / 100 g) indicated that fat and protein were preferentially located on the surface of powders. Low protein powder (35 g / 100 g) exhibited lactose crystallisation, whereas powders with higher protein contents did not, due to their high protein: lactose ratio. Insolubility was evident in high protein MPCs and was primarily related to insolubility of the casein fraction. High temperature (50 °C) was required for dissolution of high protein MPCs (protein content > 60 g / 100 g). The effect of different oil types and spray-drying outlet temperature on the physicochemical properties of the resultant fat-filled powders was investigated and showed that increasing outlet temperature reduced water content, water activity and tapped bulk density, irrespective of oil type, and increased solvent-extractable free fat for all oil types and onset of glass transition (Tg) and crystallisation (Tcr) temperature. Powder dispersions of protein/lactose (0.21:1), containing either intact or hydrolysed whey protein (12 % degree of hydrolysis; DH), were spray-dried at pilot scale. Moisture sorption analysis at 25 °C showed that dispersions containing intact whey protein exhibited lactose crystallisation at a lower relative humidity (RH). Dispersions containing hydrolysed whey protein had significantly higher (P < 0.05) water diffusivity. Finally, a spray-dried model infant formula was produced containing hydrolysed or intact whey as the protein with sunflower oil as the fat source. Reconstituted, hydrolysed formula had a significantly (P < 0.05) higher fat globule size and lower emulsion stability than intact formula. Lactose crystallisation in powders occurred at higher RH for hydrolysed formula. In conclusion, this research has shown the effect of altering the protein type, protein composition, and oil type on the surface composition and physical properties of different dairy powders, and how these variations greatly affect their rehydration characteristics and storage stability.

Crystallization on the Mesoscale : Self-Assembly of Iron Oxide Nanocubes into Mesocrystals

Self-assembly of nanoparticles is a promising route to form complex, nanostructured materials with functional properties. Nanoparticle assemblies characterized by a crystallographic alignment of the nanoparticles on the atomic scale, i.e. mesocrystals, are commonly found in nature with outstanding functional and mechanical properties. This thesis aims to investigate and understand the formation mechanisms of mesocrystals formed by self-assembling iron oxide nanocubes. We have used the thermal decomposition method to synthesize monodisperse, oleate-capped iron oxide nanocubes with average edge lengths between 7 nm and 12 nm and studied the evaporation-induced self-assembly in dilute toluene-based nanocube dispersions. The influence of packing constraints on the alignment of the nanocubes in nanofluidic containers has been investigated with small and wide angle X-ray scattering (SAXS and WAXS, respectively). We found that the nanocubes preferentially orient one of their {100} faces with the confining channel wall and display mesocrystalline alignment irrespective of the channel widths.  We manipulated the solvent evaporation rate of drop-cast dispersions on fluorosilane-functionalized silica substrates in a custom-designed cell. The growth stages of the assembly process were investigated using light microscopy and quartz crystal microbalance with dissipation monitoring (QCM-D). We found that particle transport phenomena, e.g. the coffee ring effect and Marangoni flow, result in complex-shaped arrays near the three-phase contact line of a drying colloidal drop when the nitrogen flow rate is high. Diffusion-driven nanoparticle assembly into large mesocrystals with a well-defined morphology dominates at much lower nitrogen flow rates. Analysis of the time-resolved video microscopy data was used to quantify the mesocrystal growth and establish a particle diffusion-based, three-dimensional growth model. The dissipation obtained from the QCM-D signal reached its maximum value when the microscopy-observed lateral growth of the mesocrystals ceased, which we address to the fluid-like behavior of the mesocrystals and their weak binding to the substrate. Analysis of electron microscopy images and diffraction patterns showed that the formed arrays display significant nanoparticle ordering, regardless of the distinctive formation process.  We followed the two-stage formation mechanism of mesocrystals in levitating colloidal drops with real-time SAXS. Modelling of the SAXS data with the square-well potential together with calculations of van der Waals interactions suggests that the nanocubes initially form disordered clusters, which quickly transform into an ordered phase.

Sistemas semissólidos à base de nanopartículas lipídicas

As nanopartículas lipídicas foram desenvolvidas no início dos anos 90 e, atendendo às vantagens que apresentam comparativamente a outros sistemas coloidais, têm-se demonstrado muito promissoras, tanto para uso cosmético como farmacêutico. No entanto, atualmente apenas existem comercializados produtos cosméticos à base de nanopartículas lipídicas, o que pode ser justificado pelas restrições regulamentares relacionadas com a introdução de medicamentos no mercado. Existem dois tipos de nanopartículas lipídicas, as nanopartículas de lípidos sólidos (Solid Lipid Nanoparticles, SLN) e os vetores lipídicos nanoestruturados (Nanostructured Lipid Carriers, NLC), consistindo ambos em dispersões aquosas de nanopartículas sólidas. A baixa viscosidade destes sistemas dificulta a sua aplicação tópica. Neste contexto, têm sido desenvolvidas várias formulações semissólidas à base de nanopartículas lipídicas para aplicação tópica, nomeadamente cutânea, ocular, nasal e vaginal. A primeira parte desta dissertação consiste na revisão bibliográfica relativa ao estado da arte dos sistemas semissólidos à base de nanopartículas lipídicas, para uso farmacêutico e cosmético, baseada nos estudos realizados por diversos autores, entre 2012 e 2016. Na segunda parte, são apresentados resultados do trabalho experimental relativo ao desenvolvimento e caraterização de uma formulação semissólida à base de nanopartículas lipídicas.

Landau-Gutzwiller quasi-particles

We define Landau quasiparticles within the Gutzwiller variational theory and derive their dispersion relation for general multiband Hubbard models in the limit of large spatial dimensions D. Thereby we reproduce our previous calculations which were based on a phenomenological effective single-particle Hamiltonian. For the one-band Hubbard model we calculate the frst-order corrections in 1/D and find that the corrections to the quasiparticle dispersions are small in three dimensions. They may be largely absorbed in a rescaling of the total bandwidth, unless the system is close to half band filling. Therefore, the Gutzwiller theory in the limit of large dimensions provides quasiparticle bands which are suitable for a comparison with real, three-dimensional Fermi liquids.

Desenvolvimento de uma nanoformulação autoemulsificante contendo o alcaloide epiisopiloturina para melhorar sua biodisponibilidade plasmática após administração via oral

Dissertação (mestrado)—Universidade de Brasília, Instituto de Ciências Biológicas, Programa de Pós-Graduação em Nanociência e Nanobiotecnologia, 2016.

The Effect of Iron Oxide Nanoparticles on the Fate and Transformation of Arsenic in Aquatic Environments

Iron oxides and arsenic are prevalent in the environment. With the increase interest in the use of iron oxide nanoparticles (IONPs) for contaminant remediation and the high toxicity of arsenic, it is crucial that we evaluate the interactions between IONPs and arsenic. The goal was to understand the environmental behavior of IONPs in regards to their particle size, aggregation and stability, and to determine how this behavior influences IONPs-arsenic interactions. A variety of dispersion techniques were investigated to disperse bare commercial IONPs. Vortex was able to disperse commercial hematite nanoparticles into unstable dispersions with particles in the micrometer size range while probe ultrasonication dispersed the particles into stable dispersions of nanometer size ranges for a prolonged period of time. Using probe ultrasonication and vortex to prepare IONPs suspensions of different particle sizes, the adsorption of arsenite and arsenate to bare hematite nanoparticles and hematite aggregates were investigated. To understand the difference in the adsorptive behavior, adsorption kinetics and isotherm parameters were determined. Both arsenite and arsenate were capable of adsorbing to hematite nanoparticles and hematite aggregates but the rate and capacity of adsorption is dependent upon the hematite particle size, the stability of the dispersion and the type of sorbed arsenic species. Once arsenic was adsorbed onto the hematite surface, both iron and arsenic can undergo redox transformation both microbially and photochemically and these processes can be intertwined. Arsenic speciation studies in the presence of hematite particles were performed and the effect of light on the redox process was preliminary quantified. The redox behavior of arsenite and arsenate were different depending on the hematite particle size, the stability of the suspension and the presence of environmental factors such as microbes and light. The results from this study are important and have significant environmental implications as arsenic mobility and bioavailability can be affected by its adsorption to hematite particles and by its surface mediated redox transformation. Moreover, this study furthers our understanding on how the particle size influences the interactions between IONPs and arsenic thereby clarifying the role of IONPs in the biogeochemical cycling of arsenic.

Copper ions binding in cu‐alginate gelation

Alginate polysaccharide forms viscous aqueous dispersions and has the ability to form gels in the presence of divalent cations such as calcium and copper. In this work, we have studied cooper ions binding during Cu‐alginate gelation, obtaining quantitative information about the amount and kinetics of cation binding. Our results indicate that copper binding during gelation occurs until a Langmuir‐type equilibrium is reached between bound and free ions in the gel‐contacting solution. The kinetics of metal ions binding can be modeled using Ritchie equation–derived models, allowing the prediction of ionic binding and gel formation temporal evolution. The ratio between cationic and polysaccharide quantities in the gelation system determines the kinetics of gelation and the characteristics of the gel formed. The experimental results and models applied in the work give more insights on alginate gelation and contribute to a reliable design and control of production methods for alginate gel structures.

Testing the cleaning effectiveness of new ecological aqueousdispersions applied on old icons

Adherent deposits are very aggressive towards ancient heritage paintings since they affect the varnish and the painting’s layers, sometimes reaching the preparative layers. The biggest problem to the restorer is their removal without affecting the patina, the transparent varnish (well preserved) and fine colour glazes made during painting. Therefore, their removal requires preliminary cleaning tests that allow the optimization of the cleaning system composition that is going to be used. The study was focused on organic natural systems, as colourless supernatants, some of them used during ages, but insufficiently studied. The paper presents an evaluation of the effectiveness of cleaning varnished icons of the nineteenth century, with complex conservation cases using supernatants derived from aqueous dispersions extracted from vegetables and dry indigenous herbal infusions. Best results, after six consecutive cleaning steps, on tempera old icon was obtained for a mixture made of mature white onion juice + extract of Soapwort flowers + corn silk tea + acacia tea. As a best result after just one cleaning step was obtained for a quaternary mixture composed from mature white onion juice + mature carrot juice + corn silk tea + aqueous extract of Soapwort flowers.

Transgrouded Poetries

ABSTRACT:  Dealing with the concept of Transterradas Poetics implies tracing a critical route that brings forth a perspective of risk. Would there be the possibility of dialogue between procedures used by the new latin-american narrative of the '60's and the generation of the 90's, or even the first decade of the twenty first century as dispersions in space that contaminate the discourse configured by time? And how does the foucaltian heterotopia aggregates in this course? Three ramifications will sketch the trajectory of this essay that, provisional, merely insinuates the rhythm of a light suspicion. KEYWORDS: Transterradas Poetics; Roa Bastos; Literature; Latin America.