Gruta da figueira brava (Arrabida): Geological setting

Separata do Tomo XXXVIII das Memories da Academia das Ciencias de Lisboa (Classe de Ciencias)

Optimal location of supports in beam structures using genetic algorithms

Real structures can be thought as an assembly of components, as for instances plates, shells and beams. This later type of component is very commonly found in structures like frames which can involve a significant degree of complexity or as a reinforcement element of plates or shells. To obtain the desired mechanical behavior of these components or to improve their operating conditions when rehabilitating structures, one of the eventual parameters to consider for that purpose, when possible, is the location of the supports. In the present work, a beam-type structure is considered, and for a set of cases concerning different number and types of supports, as well as different load cases, the authors optimize the location of the supports in order to obtain minimum values of the maximum transverse deflection. The optimization processes are carried out using genetic algorithms. The results obtained, clearly show a good performance of the approach proposed. © 2014 IEEE.

analytical model and measurements of the target erosion depth profile of balanced and unbalanced planar magnetron cathodes

The erosion depth profile of planar targets in balanced and unbalanced magnetron cathodes with cylindrical symmetry is measured along the target radius. The magnetic fields have rotational symmetry. The horizontal and vertical components of the magnetic field B are measured at points above the cathode target with z = 2 x 10(-3) m. The experimental data reveal that the target erosion depth profile is a function of the angle. made by B with a horizontal line defined by z = 2 x 10(-3) m. To explain this dependence a simplified model of the discharge is developed. In the scope of the model, the pathway lengths of the secondary electrons in the pre-sheath region are calculated by analytical integration of the Lorentz differential equations. Weighting these lengths by using the distribution law of the mean free path of the secondary electrons, we estimate the densities of the ionizing events over the cathode and the relative flux of the sputtered atoms. The expression so deduced correlates for the first time the erosion depth profile of the target with the angle theta. The model shows reasonably good fittings to the experimental target erosion depth profiles confirming that ionization occurs mainly in the pre-sheath zone.

A study on the modeling of sandwich functionally graded particulate composites

Dual-phase functionally graded materials are a particular type of composite materials whose properties are tailored to vary continuously, depending on its two constituent's composition distribution, and which use is increasing on the most diverse application fields. These materials are known to provide superior thermal and mechanical performances when compared to the traditional laminated composites, exactly because of this continuous properties variation characteristic, which enables among other advantages smoother stresses distribution profile. In this paper we study the influence of different homogenization schemes, namely the schemes due to Voigt, Hashin-Shtrikman and Mod-Tanaka, which can be used to obtain bounds estimates for the material properties of particulate composite structures. To achieve this goal we also use a set of finite element models based on higher order shear deformation theories and also on first order theory. From the studies carried out, on linear static analyses and on free vibration analyses, it is shown that the bounds estimates are as important as the deformation kinematics basis assumed to analyse these types of multifunctional structures. Concerning to the homogenization schemes studied, it is shown that Mori-Tanaka and Hashin-Shtrikman estimates lead to less conservative results when compared to Voigt rule of mixtures.

Optimising the energy consumption on pultrusion process

This study is based on a previous experimental work in which embedded cylindrical heaters were applied to a pultrusion machine die, and resultant energetic performance compared with that achieved with the former heating system based on planar resistances. The previous work allowed to conclude that the use of embedded resistances enhances significantly the energetic performance of pultrusion process, leading to 57% decrease of energy consumption. However, the aforementioned study was developed with basis on an existing pultrusion die, which only allowed a single relative position for the heaters. In the present work, new relative positions for the heaters were investigated in order to optimise heat distribution process and energy consumption. Finite Elements Analysis was applied as an efficient tool to identify the best relative position of the heaters into the die, taking into account the usual parameters involved in the process and the control system already tested in the previous study. The analysis was firstly developed based on eight cylindrical heaters located in four different location plans. In a second phase, in order to refine the results, a new approach was adopted using sixteen heaters with the same total power. Final results allow to conclude that the correct positioning of the heaters can contribute to about 10% of energy consumption reduction, decreasing the production costs and leading to a better eco-efficiency of pultrusion process.

Saving energy in the GFRP pultrusion process

This study addresses to the optimization of pultrusion manufacturing process from the energy-consumption point of view. The die heating system of external platen heaters commonly used in the pultrusion machines is one of the components that contribute the most to the high consumption of energy of pultrusion process. Hence, instead of the conventional multi-planar heaters, a new internal die heating system that leads to minor heat losses is proposed. The effect of the number and relative position of the embedded heaters along the die is also analysed towards the setting up of the optimum arrangement that minimizes both the energy rate and consumption. Simulation and optimization processes were greatly supported by Finite Element Analysis (FEA) and calibrated with basis on the temperature profile computed through thermography imaging techniques. The main outputs of this study allow to conclude that the use of embedded cylindrical resistances instead of external planar heaters leads to drastic reductions of both the power consumption and the warm-up periods of the die heating system. For the analysed die tool and process, savings on energy consumption up to 60% and warm-up period stages less than an half hour were attained with the new internal heating system. The improvements achieved allow reducing the power requirements on pultrusion process, and thus minimize industrial costs and contribute to a more sustainable pultrusion manufacturing industry.

Upper Miocene planktonic foraminifera from Algarve. Chronostratigraphical implications

Ciências da Terra(UNL) Nº 15, pp. 199-208

Optimizing the embedded heaters position in the pultrusion process using finite element analysis

This study is based on a previous experimental work in which embedded cylindrical heaters were applied to a pultrusion machine die, and resultant energetic performance compared with that achieved with the former heating system based on planar resistances. The previous work allowed to conclude that the use of embedded resistances enhances significantly the energetic performance of pultrusion process, leading to 57% decrease of energy consumption. However, the aforementioned study was developed with basis on an existing pultrusion die, which only allowed a single relative position for the heaters. In the present work, new relative positions for the heaters were investigated in order to optimize heat distribution process and energy consumption. Finite Elements Analysis was applied as an efficient tool to identify the best relative position of the heaters into the die, taking into account the usual parameters involved in the process and the control system already tested in the previous study. The analysis was firstly developed with basis on eight cylindrical heaters located in four different location plans. In a second phase, in order to refine the results, a new approach was adopted using sixteen heaters with the same total power. Final results allow to conclude that the correct positioning of the heaters can contribute to about 10% of energy consumption reduction, decreasing the production costs and leading to a better eco-efficiency of pultrusion process.

High-resolution correlation of coastal cliff sections in the Lagos- Portimao Formation (Lower - Middle Miocene, central Algarve, Portugal)

This paper describes a high-resolution stratigraphic correlation scheme for the early to middle Miocene Lagos-Portimão Formation of central Algarve, southern Portugal. The Lagos Portimão-Formation of central Algarve is a 60 m thick package of horizontally bedded siliciclastics and carbonates. The bryozoan and mollusc dominated biofacies is typical of a shallow marine, warm-temperate climatic environment. We define four stratigraphic marker beds based on biofacies, lithology, and gamma-ray signatures. Marker bed 1 is a reddish shell bed composed predominantly of bivalve shells in various stages of fragmentation. Marker bed 2 is a fossiliferous sandstone / sandy rudstone characterized by bryozoan masses. Marker bed 3 is also a fossiliferous sandstone with abundant larger foraminifers and foliate bryozoans. Marker bed 4 is composed of three distinct layers; two fossiliferous sandstones with an intercalated shell bed. The upper sandstone unit displays thickets of the bryozoan Celleporaria palmate associated with the coral Culizia parasitica. This stratigraphic framework allows to correlate isolated outcrops within the stratigraphic context of the Lagos-Portimão Formation and to establish high resolution chronostratigraphic Sr-isotopic dating.

Late Quaternary warm marine mollusks from Santa Maria (Azores); paleoecologic and paleobiogeographic considerations

The sub-fossil fauna from the Late Quaternary marine deposits of Santa Maria is made of more than 50 species of gastropods and bivalves, 19 of them collected recently and for the first time in the northern coast of the island (Lagoinhas Bay). The sub-fossil shells are found in deposits of beach sands, situated 2-3 meters above the present low tide. The carbonated sands from the basal part of the succession yield an autochthonous association of borers dominated by the bivalve Myoforceps aristata (Dillwin, 1817). Upwards, the marine sands contain concentrations of beach drift shells, including well-preserved supratidal and intertidal gastropods, among them a large number of Rissoidae. The bivalve fauna is dominated by disarticulated valves of Ervilia castanea (Montagu, 1803), a small infaunal coloniser of mobile sandy substrates. The composition of the fauna is made essentially of West European species, many of them common to the West Coast of Portugal. However, a few "warm guests" with West African or Caribbean affinities were also found, suggesting a close relation with some of the "Tyrrhenian" warm associations found in the Western Mediterranean.

Upper miocene planktonic foraminifera from Algarve. Chronostratigraphical implications

New data on the planktonic foraminifera from the Upper Miocene Cacela Formation and Mem Moniz spongoliths are presented. The coiling type of Globorotalia menardii from Cacela and Quelfes and the occurrence at Quelfes of G. miotumida allow correlation with the bio-events I to 3 (7,512 to 7,24 Ma; Sierro et al., 1993; 2001) that have been recognized in the Guadalquivir Basin (Spain). The presence of Neogloboquadrina acostaensis and N. humerosa at Mem Moniz points out to the Upper Miocene (Tortonian, upper N16, or even NI7). Mem Moniz spongoliths are correlated with the Cacela Formation. Some 87Sr/86Sr isotopic ages of mollusc or foraminifera shells don't fit well with finer biostratigraphic record and present wide error margins.

Rediscovery of Leptaxis vetusta (Morelet & Drouet, 1857), a subfossil land snail from the Quaternary of Santa Maria (Azores)

During a recent field work on the southern coast of the island of Santa Maria (Azores) a bulk sample of 37 shells and 25 fragments of Leptaxis vetusta was assembled from Late Pleistocene and Holocene slope deposits outcropping in the area. These specimens are the first of this rare subfossil species to be mentioned since the original descriptions of Arthur Morelet and Henri Drouet (1857). The purposes of our paper are a systematic and biometric description of L. vestuta. For the first time, the original type: locality was localized with accuracy over the southern downslopes of Pico do Facho, between Figueiral and Prainha. The subfossil specimens were collected in slope deposits and detritic fans, overlying a fossiliferous marine deposit situated over the 2-3 m abrasion platform of Praia and Prainha bay. The age and factors associated to the extinction of this species are discussed, including the destruction of the original laurel cover and the colonization by Otala lactea (Muller, 1774), a continental helicid introduced and widespread in Santa Maria.

The Farol Deposit (Depósito do Farol) – a Pleistocene beach deposit from Cape Mondego (Figueira da Foz, West Central Portugal)*

Among the Pleistocene and Holocene units recorded near the marine cliffs of Cape Mondego (Figueira da Foz, West Central Portugal) stands out the Farol Deposit (Depósito do Farol), at an altitude of ±95 m above present sea level. It is a marine terrace with three exposures of interstratified conglomerates and sands, overlapped by calclititic-fanglomerates. This sedimentary setting indicates that deposition took place in a seashore environment influenced by the proximity of a marine palaeocliff. The deposit has an interesting subfossil fauna with abraded and fragmented shells of Nucella lapillus (LINNÉ, 1758), Patella vulgata (LINNÉ, 1758) and Littorina littorea (LINNÉ, 1758), suggesting the existence of an environment with colder surface seawater, when compared with the present day Portuguese seashore. These specimens belonged to marine communities adapted to live in intertidal rocky platforms, which have been exposed to the cyclic action of waves and tidal flows, on the swash and surf zones. The Farol Deposit can be related to an Early/Middle Pleistocene “cold-water” episode, earlier to the Isotopic Stages 7 and 11. This episode occurred before the deposition of the units Quiaios Sands (Areias de Quiaios) and Cantanhede Sands (Areias de Cantanhede) (Sicilian?), but later than the Arazede Sands (Areias de Arazede) and Marinha das Ondas Sands (Areias de Marinha das Ondas) (Early Pleistocene).

Otimização de placas compósitas laminadas utilizando redes neuronais e enxames de partículas

Trabalho Final de mestrado para obtenção do grau de Mestre em engenharia Mecância

Modelação de organismos com crescimento logarítmico: aplicação às amonites *

This work refers to the development of modelling tools to create Ammonite shells in order to produce animated models for scientific dissemination and didactic purposes. In the approach here proposed we assume that the growth of those shells from an initial stage – the protoconch – can be interpreted as a succession of revolutions in turn of a central axis; thus the conch’s section will increase as a non-linear progression. So, we emphasise that the shape of many type of shells, e.g. gastropods and bivalves, is based on the equation of the logarithmic spiral deduced by R. Descartes. Pixels 3d (Pixels Digital Inc., 2005) is a TCL – scriptable modelling and animation software that allows extendable interapplication communication. Hence a standalone prototype (Shellia) with shell assignable parameters was produced and some of their issues and results will be presented here.