Physical access for persons with disabilities

For persons with disabilities, the activities that able-bodied people take for granted can be major, often insurmountable challenges. Attempting to enter a restaurant for lunch with friends can result in lengthy and adversarial litigation if the facility is not accessible to a person with a disability or other mobility impairment. This litigation would be initiated after the individual was effectively refused service; a refusal based on hislher personal physical characteristics. If a shopping mall is not equipped with "access amenities", then the disabled person may be excluded from shopping there and thus exercising consumer freedom. If workplaces are not equipped to accommodate the access needs of persons with disabilities, then those people are effectively barred from gainful employment there. If a municipal goveniment building is inaccessible to disabled persons, then they may be excluded from participating in council meetings. These are all activities that the majority of the population enjoys as a matter of course, in that they represent the functions of a free citizen in a free society. If a person is excluded from such activities because of some personal characteristic, then that person is subjected to differential or discr~minatory treatment. The guarantees provided in Canadian feden! and provincial rights legislation, are such that people are not to be discriminated againsL Where buildings and facilities othen\iise open to the public are not accessible for persens with disabilities, then those people are being discriminated against. To challenge these discriminatory practices, individuals initiate complaints through the administrative justice system. To address the extent to which this is a problem, many sources were consulted. Constitutional lawyers, tribunal members, advocates for the disabled and land use planners were interviewed. Case law and legislation were reviewed. Literature on citizenship theory, dispute resolution and dispute avoidance was compiled and assessed. And, the field of land use planning was analyzed (drawing on the WTiter's educational and experiential background) as a possible alternative method for effecting systemic access for persons with disabilities. The conclusion of this study is that there does exist a proactive method for assuring access, a method that can apply the systemic remedy needed to deal with this problem. The current method, which is an adversarial and piecemeal complaint process, has proven ineffective in remedying this discrimination problem~ Failure to provide an appropriate remedy means that persons with disabilities will not enjoy the degree of citizen status enjoyed by the able-bodied. This is the current circumstance, and since equity is the aim of rights legislation, and since such legislative and administrative frameworks have failed in that purpose, then an alternative method is necessary. An alternative model is the one in which land use planning is based. It has conflict avoidance and conflict minimization as underpinnings. And, most importantly, land use planning is already a proyen method of combatting discrimination.

Evaluation of a professional development curriculum in movement education and adapted physical activity for invisible disabilities : a critical cross-case analysis

Movement education and adapted physical activity are content areas not addressed in pre-service education or in-service training for Ontario practitioners working with individuals with disabilities in physical environments. Consequently, physical activity is often overlooked by service providers in programming and intervention for exceptional young learners. A formative evaluation, multiple-case study design was employed in this research in which a purposeful sample of expert practitioners performed a guided, descriptive evaluation of a three-day professional development workshop curriculum designed to supplement these areas lacking in professional preparation within their respective cohorts. Case-by-case and comparative analyses illustrated the inherent assumptions and societal constraints which prioritize the structure of professional development within the education system and other government organizations providing services for school-aged persons with disabilities in Ontario. Findings, discussed from a critical postmodern perspective, illustrate the paradoxical nature of Western values and prevailing mind/body dichotomy that guide professional practice in these fields.

Active2010 and the Ontario School System: A Top-Down Policy Implementation Analysis

In 2004, the Ontario Ministry of Health Promotion and Sport (MHPS) established Active2010: Ontario’s Sport and Physical Activity Strategy. Active2010 demonstrates a strong provincial government policy emphasis regarding sport participation and physical activity (PA), and identifies the school system as a primary vehicle for enhancing PA levels. This study examines the sport and PA initiatives MHPS is undertaking within the school system. Theoretical context regarding neo-liberalism in Canada and Canadian sport frames this study, while a revised version of Van Meter and Van Horn’s (1975) top-down model of policy implementation guides the research process. A case study of the school-based PA system is conducted which relies on the analysis of 11 semi-structured interviews and 47 official organizational documents. Four emergent categories of Jurisdictional Funding, Coercive Policy, Sector Silos, and Community Champions are identified. Additional insight is provided regarding neo-liberalism, provincial level government, interministerial collaboration, and government/non-profit sector partnership.

The hypotensive effect of exercise on IOP : an interaction of physical fitness and parasympathetic efficacy

RÉSUMÉ Suite à une centaine de publications sur la réduction de la PIO post-exercice, il est connu que parmi un grand nombre de programme d'exercices de différentes durées et intensités, les effets hypotenseurs de l'exercice sur la PIO sont atténués chez les sujets en bonne condition physique. Le mécanisme proposé est l'augmentation potentielle de l'efficacité du système parasympathique avec l'activité physique. Le principal objectif de cette thèse est d'identifier les facteurs contribuants à la réduction de la PIO post-exercice et d'élucider les différents mécanismes possibles. L'étude 1, une méta-analyse, a été menée afin de quantifier les contributions relatives de l'intensité et de la durée de l'effet de l'exercice sur la PIO et la mesure dans laquelle ces variables affectent les sujets sédentaires et normalement actifs. La tendance ressortant des résultats est que la diminution de la PIO suite à de l'exercice aérobie est plus élevée chez les sujets sédentaires que les sujets en bonne condition physique. (ES = -4.198 mm Hg et -2.340 mm Hg, respectivement). L'absence d'un contrôle des liquides ingérés avant l'activité physique est à souligné dans cette étude. L'hyperosmolarité (un effet secondaire de la déshydratation) est l'un des mécanismes proposés influant l'effet hypotenseur de l'exercice. L'étude 2 comparait la réduction de la PIO dans deux conditions, soit hypohydraté et hyperhydraté, avant, pendant et après un effort de 90 minutes sur un ergocycle. Après une diminution initiale pour les deux conditions, la PIO revient aux valeurs de départ pour la condition hypohydratée malgré une perte de poids significative et elle augmente pour la condition hyperhydratée (résultat du protocole d'hydratation). Étant donné le niveau élevé de participants en bonne condition physique dans l'étude 2, la troisième étude a été conçue afin de etude la relation entre la PIO et la condition physique. À l'aide d'analyses corrélationnelles il a été possible d'observer la relation entre le test de vo2max et la moyenne des mesures de PIO prises sur un intervalle de huit semaines. Une relation significative n'existait que pour les participants se situant dans la portion supérieure du continuum de la condition physique. Conclusion: Les résultats de la présente étude suggèrent que l'effet hypotenseur de l'exercice sur la PIO est probablement une réponse homéostatique à la dérégulation de l'humeur aqueuse causée par l'initiation de l'exercice et le protocole d'ingestion de fluides pré-exercice.

Temperature Stable Low Loss Ceramic Dielectrics in (1-x)ZnAI2O4-xTiO2 System for Microwave Substrate Applications

The microwave dielectric properties of ZnAl2O4 spinels were investigated and their properties were tailored by adding different mole fractions of Ti02. The samples were synthesized using the mixed oxide rout.e. The phase purity and crystal structure were identified using X-ray diffraction technique. The sintered specimens were characterized in the microwave frequency range (3-13 GHz). The ZnA12O4 ceramics exhibited interesting dielectric properties (dielectric constant (e,.) = 8.5, unloaded quality factor (Q.) = 4590 at 12.27 GHz and temperature coefficient of resonant frequency (Tf) = -79 ppm/°C). Addition of Ti02 into the spinel improved its properties and the Tf approached zero for 0.83ZnAl2O4- 0.17TiO2• This temperature compensated composition has excellent microwave dielectric properties (Cr _ 12.67, Q, = 9950 at 10.075 GHz) which can be exploited for microwave substrate applications

Multiple edges of a quantum Hall system in a strong electric

In this paper we show that if the electrons in a quantum Hall sample are subjected to a constant electric field in the plane of the material, comparable in magnitude to the background magnetic field on the system of electrons, a multiplicity of edge states localized at different regions of space is produced in the sample. The actions governing the dynamics of these edge states are obtained starting from the well-known Schrödinger field theory for a system of nonrelativistic electrons, where on top of the constant background electric and magnetic fields, the electrons are further subject to slowly varying weak electromagnetic fields. In the regions between the edges, dubbed as the "bulk," the fermions can be integrated out entirely and the dynamics expressed in terms of a local effective action involving the slowly varying electromagnetic potentials. It is further shown how the bulk action is gauge noninvariant in a particular way, and how the edge states conspire to restore the U(1) electromagnetic gauge invariance of the system. In the edge action we obtain a heretofore unnoticed gauge-invariant term that depends on the particular edge. We argue that this term may be detected experimentally as different edges respond differently to a monochromatic probe due to this term

Continuum bound states as surface states of a finite periodic system

We discuss the relation between continuum bound states (CBSs) localized on a defect, and surface states of a finite periodic system. We model an experiment of Capasso et al. [F. Capasso, C. Sirtori, J. Faist, D. L. Sivco, S-N. G. Chu, and A. Y. Cho, Nature (London) 358, 565 (1992)] using the transfer-matrix method. We compute the rate for intrasubband transitions from the ground state to the CBS and derive a sum rule. Finally we show how to improve the confinement of a CBS while keeping the energy fixed.

Hysteresis in a system driven by either generalized force or displacement variables: martensitic phase transition in single-crystalline Cu-Zn-Al

We report on experiments aimed at comparing the hysteretic response of a Cu-Zn-Al single crystal undergoing a martensitic transition under strain-driven and stress-driven conditions. Strain-driven experiments were performed using a conventional tensile machine while a special device was designed to perform stress-driven experiments. Significant differences in the hysteresis loops were found. The strain-driven curves show reentrant behavior yield point which is not observed in the stress-driven case. The dissipated energy in the stress-driven curves is larger than in the strain-driven ones. Results from recently proposed models qualitatively agree with experiments.

Development of optical fiber sensors for selected chemical and physical sensing applications

The objective of the preset work is to develop optical fiber sensors for various physical and chemical parameters. As a part of this we initially investigated trace analysis of silica, ammonia, iron and phosphate in water. For this purpose the author has implemented a dual wavelength probing scheme which has many advantages over conventional evanescent wave sensors. Dual wavelength probing makes the design more reliable and repeatable and this design makes the sensor employable for concentration, chemical content, adulteration level, monitoring and control in industries or any such needy environments. Use of low cost components makes the system cost effective and simple. The Dual wavelength probing scheme is employed for the trace analysis of silica, iron, phosphate, and ammonia in water. Such sensors can be employed for the steam and water quality analysers in power plants. Few samples from a power plant are collected and checked the performance of developed system for practical applications.

Growth And Characterization Of Te-Se System And Some Tei.I.Urioes

The physical properties of solid matter are basically influenced by the existence of lattice defects; as a result the study of crystal defects has assumed a central position in solid state physics and materials science. The study of dislocations ixa single crystals can yield a great deal of information on the mechanical properties of materials. In order to secure a full understanding of the processes taking place in semiconducting materials, it is important to investigate the microhardness of these materials-—the most reliable method of determining the fine structure of crystals, the revelation of micro—inhomogenities in the distribution of impurities, the effect of dislocation density on the mechanical properties of crystals etc. Basically electrical conductivity in single crystals is a defect controlled phenomenon and hence detailed investigation of the electrical properties of these materials is one of the best available methods for the study of defects in them. In the present thesis a series of detailed studies carried out in Te—Se system, Bi2Te3 and In2Te3 crystals using surface topographical, dislocation and microindentation analysis as well as electrical measurements are presented

Entropy of a correlated system of nucleons

Realistic nucleon-nucleon interactions induce correlations to the nuclear many-body system, which lead to a fragmentation of the single-particle strength over a wide range of energies and momenta. We address the question of how this fragmentation affects the thermodynamical properties of nuclear matter. In particular, we show that the entropy can be computed with the help of a spectral function, which can be evaluated in terms of the self-energy obtained in the self-consistent Green's function approach. Results for the density and temperature dependences of the entropy per particle for symmetric nuclear matter are presented and compared to the results of lowest order finite-temperature Brueckner-Hartree-Fock calculations. The effects of correlations on the calculated entropy are small, if the appropriate quasiparticle approximation is used. The results demonstrate the thermodynamical consistency of the self-consistent T-matrix approximation for the evaluation of the Green's functions.

A Prototype for a Multimodal Biometric Security system based on Face and Audio Signatures

Any automatically measurable, robust and distinctive physical characteristic or personal trait that can be used to identify an individual or verify the claimed identity of an individual, referred to as biometrics, has gained significant interest in the wake of heightened concerns about security and rapid advancements in networking, communication and mobility. Multimodal biometrics is expected to be ultra-secure and reliable, due to the presence of multiple and independent—verification clues. In this study, a multimodal biometric system utilising audio and facial signatures has been implemented and error analysis has been carried out. A total of one thousand face images and 250 sound tracks of 50 users are used for training the proposed system. To account for the attempts of the unregistered signatures data of 25 new users are tested. The short term spectral features were extracted from the sound data and Vector Quantization was done using K-means algorithm. Face images are identified based on Eigen face approach using Principal Component Analysis. The success rate of multimodal system using speech and face is higher when compared to individual unimodal recognition systems

Modelling and simulation of a photovoltaic fuel cell hybrid system

A stand-alone power system is an autonomous system that supplies electricity to the user load without being connected to the electric grid. This kind of decentralized system is frequently located in remote and inaccessible areas. It is essential for about one third of the world population which are living in developed or isolated regions and have no access to an electricity utility grid. The most people live in remote and rural areas, with low population density, lacking even the basic infrastructure. The utility grid extension to these locations is not a cost effective option and sometimes technically not feasible. The purpose of this thesis is the modelling and simulation of a stand-alone hybrid power system, referred to as “hydrogen Photovoltaic-Fuel Cell (PVFC) hybrid system”. It couples a photovoltaic generator (PV), an alkaline water electrolyser, a storage gas tank, a proton exchange membrane fuel cell (PEMFC), and power conditioning units (PCU) to give different system topologies. The system is intended to be an environmentally friendly solution since it tries maximising the use of a renewable energy source. Electricity is produced by a PV generator to meet the requirements of a user load. Whenever there is enough solar radiation, the user load can be powered totally by the PV electricity. During periods of low solar radiation, auxiliary electricity is required. An alkaline high pressure water electrolyser is powered by the excess energy from the PV generator to produce hydrogen and oxygen at a pressure of maximum 30bar. Gases are stored without compression for short- (hourly or daily) and long- (seasonal) term. A proton exchange membrane (PEM) fuel cell is used to keep the system’s reliability at the same level as for the conventional system while decreasing the environmental impact of the whole system. The PEM fuel cell consumes gases which are produced by an electrolyser to meet the user load demand when the PV generator energy is deficient, so that it works as an auxiliary generator. Power conditioning units are appropriate for the conversion and dispatch the energy between the components of the system. No batteries are used in this system since they represent the weakest when used in PV systems due to their need for sophisticated control and their short lifetime. The model library, ISET Alternative Power Library (ISET-APL), is designed by the Institute of Solar Energy supply Technology (ISET) and used for the simulation of the hybrid system. The physical, analytical and/or empirical equations of each component are programmed and implemented separately in this library for the simulation software program Simplorer by C++ language. The model parameters are derived from manufacturer’s performance data sheets or measurements obtained from literature. The identification and validation of the major hydrogen PVFC hybrid system component models are evaluated according to the measured data of the components, from the manufacturer’s data sheet or from actual system operation. Then, the overall system is simulated, at intervals of one hour each, by using solar radiation as the primary energy input and hydrogen as energy storage for one year operation. A comparison between different topologies, such as DC or AC coupled systems, is carried out on the basis of energy point of view at two locations with different geographical latitudes, in Kassel/Germany (Europe) and in Cairo/Egypt (North Africa). The main conclusion in this work is that the simulation method of the system study under different conditions could successfully be used to give good visualization and comparison between those topologies for the overall performance of the system. The operational performance of the system is not only depending on component efficiency but also on system design and consumption behaviour. The worst case of this system is the low efficiency of the storage subsystem made of the electrolyser, the gas storage tank, and the fuel cell as it is around 25-34% at Cairo and 29-37% at Kassel. Therefore, the research for this system should be concentrated in the subsystem components development especially the fuel cell.

Femtosecond time-resolved molecular multiphoton ionization: the Na_2 system

We report here the first experimental study of femtosecond time-resolved molecular multiphoton ionization. Femtosecond pump-probe techniques are combined with time-of-flight spectroscopy to measure transient ionization spectra of Na_2 in a molecular-beam experiment. The wave-packet motions in different molecular potentials show that incoherent contributions from direct photoionization of a singly excited state and from excitation and autoionization of a bound doubly excited molecular state determine the observed transient ionization signal.

Patent DE10 2004 037 519 B4 “Sensor Process and Device for Determining a Physical Value“. A Proof of Concept

At present, a fraction of 0.1 - 0.2% of the patients undergoing surgery become aware during the process. The situation is referred to as anesthesia awareness and is obviously very traumatic for the person experiencing it. The reason for its occurrence is mostly an insufficient dosage of the narcotic Propofol combined with the incapability of the technology monitoring the depth of the patient’s anesthetic state to notice the patient becoming aware. A solution can be a highly sensitive and selective real time monitoring device for Propofol based on optical absorption spectroscopy. Its working principle has been postulated by Prof. Dr. habil. H. Hillmer and formulated in DE10 2004 037 519 B4, filed on Aug 30th, 2004. It consists of the exploitation of Intra Cavity Absorption effects in a two mode laser system. In this Dissertation, a two mode external cavity semiconductor laser, which has been developed previously to this work is enhanced and optimized to a functional sensor. Enhancements include the implementation of variable couplers into the system and the implementation of a collimator arrangement into which samples can be introduced. A sample holder and cells are developed and characterized with a focus on compatibility with the measurement approach. Further optimization concerns the overall performance of the system: scattering sources are reduced by re-splicing all fiber-to-fiber connections, parasitic cavities are eliminated by suppressing the Fresnel reflexes of all one fiber ends by means of optical isolators and wavelength stability of the system is improved by the implementation of thermal insulation to the Fiber Bragg Gratings (FBG). The final laser sensor is characterized in detail thermally and optically. Two separate modes are obtained at 1542.0 and 1542.5 nm, tunable in a range of 1nm each. Mode Full Width at Half Maximum (FWHM) is 0.06nm and Signal to Noise Ratio (SNR) is as high as 55 dB. Independent of tuning the two modes of the system can always be equalized in intensity, which is important as the delicacy of the intensity equilibrium is one of the main sensitivity enhancing effects formulated in DE10 2004 037 519 B4. For the proof of concept (POC) measurements the target substance Propofol is diluted in the solvents Acetone and DiChloroMethane (DCM), which have been investigated for compatibility with Propofol beforehand. Eight measurement series (two solvents, two cell lengths and two different mode spacings) are taken, which draw a uniform picture: mode intensity ratio responds linearly to an increase of Propofol in all cases. The slope of the linear response indicates the sensitivity of the system. The eight series are split up into two groups: measurements taken in long cells and measurements taken in short cells.