975 resultados para Comprehensive economic and financial analysis
Resumo:
The PhD project addresses the potential of using concentrating solar power (CSP) plants as a viable alternative energy producing system in Libya. Exergetic, energetic, economic and environmental analyses are carried out for a particular type of CSP plants. The study, although it aims a particular type of CSP plant – 50 MW parabolic trough-CSP plant, it is sufficiently general to be applied to other configurations. The novelty of the study, in addition to modeling and analyzing the selected configuration, lies in the use of a state-of-the-art exergetic analysis combined with the Life Cycle Assessment (LCA). The modeling and simulation of the plant is carried out in chapter three and they are conducted into two parts, namely: power cycle and solar field. The computer model developed for the analysis of the plant is based on algebraic equations describing the power cycle and the solar field. The model was solved using the Engineering Equation Solver (EES) software; and is designed to define the properties at each state point of the plant and then, sequentially, to determine energy, efficiency and irreversibility for each component. The developed model has the potential of using in the preliminary design of CSPs and, in particular, for the configuration of the solar field based on existing commercial plants. Moreover, it has the ability of analyzing the energetic, economic and environmental feasibility of using CSPs in different regions of the world, which is illustrated for the Libyan region in this study. The overall feasibility scenario is completed through an hourly analysis on an annual basis in chapter Four. This analysis allows the comparison of different systems and, eventually, a particular selection, and it includes both the economic and energetic components using the “greenius” software. The analysis also examined the impact of project financing and incentives on the cost of energy. The main technological finding of this analysis is higher performance and lower levelized cost of electricity (LCE) for Libya as compared to Southern Europe (Spain). Therefore, Libya has the potential of becoming attractive for the establishment of CSPs in its territory and, in this way, to facilitate the target of several European initiatives that aim to import electricity generated by renewable sources from North African and Middle East countries. The analysis is presented a brief review of the current cost of energy and the potential of reducing the cost from parabolic trough- CSP plant. Exergetic and environmental life cycle assessment analyses are conducted for the selected plant in chapter Five; the objectives are 1) to assess the environmental impact and cost, in terms of exergy of the life cycle of the plant; 2) to find out the points of weakness in terms of irreversibility of the process; and 3) to verify whether solar power plants can reduce environmental impact and the cost of electricity generation by comparing them with fossil fuel plants, in particular, Natural Gas Combined Cycle (NGCC) plant and oil thermal power plant. The analysis also targets a thermoeconomic analysis using the specific exergy costing (SPECO) method to evaluate the level of the cost caused by exergy destruction. The main technological findings are that the most important contribution impact lies with the solar field, which reports a value of 79%; and the materials with the vi highest impact are: steel (47%), molten salt (25%) and synthetic oil (21%). The “Human Health” damage category presents the highest impact (69%) followed by the “Resource” damage category (24%). In addition, the highest exergy demand is linked to the steel (47%); and there is a considerable exergetic demand related to the molten salt and synthetic oil with values of 25% and 19%, respectively. Finally, in the comparison with fossil fuel power plants (NGCC and Oil), the CSP plant presents the lowest environmental impact, while the worst environmental performance is reported to the oil power plant followed by NGCC plant. The solar field presents the largest value of cost rate, where the boiler is a component with the highest cost rate among the power cycle components. The thermal storage allows the CSP plants to overcome solar irradiation transients, to respond to electricity demand independent of weather conditions, and to extend electricity production beyond the availability of daylight. Numerical analysis of the thermal transient response of a thermocline storage tank is carried out for the charging phase. The system of equations describing the numerical model is solved by using time-implicit and space-backward finite differences and which encoded within the Matlab environment. The analysis presented the following findings: the predictions agree well with the experiments for the time evolution of the thermocline region, particularly for the regions away from the top-inlet. The deviations observed in the near-region of the inlet are most likely due to the high-level of turbulence in this region due to the localized level of mixing resulting; a simple analytical model to take into consideration this increased turbulence level was developed and it leads to some improvement of the predictions; this approach requires practically no additional computational effort and it relates the effective thermal diffusivity to the mean effective velocity of the fluid at each particular height of the system. Altogether the study indicates that the selected parabolic trough-CSP plant has the edge over alternative competing technologies for locations where DNI is high and where land usage is not an issue, such as the shoreline of Libya.
Resumo:
The main theme of this thesis is the social, economic and political response of a single community to economic dislocation in the interwar years. The community under consideration is Clydebank., The thesis is divided into several parts. Part I establishes the development of the burgh and considers the physical framework of the community, mainly in the years before 1919. The town's characteristics are examined in terms of population structure and development between the world wars. In the last part of this section there is a review of the economic structure of the burgh and changes occurring in it between 1919 and 1939. In Part II consideration is given to the actual extent and form of the unemployment affecting Clydebank at this time, and comparison is made with other communities and geographic/economic areas. Attention is then focussed more narrowly on the actual individuals suffering unemployment in the burgh during the 1930s, in an attempt to personalise the experience of the unemployed. Part III reviews central and local government responses to the situation in which Clydebank found itself oetween 1919 and 1939. Central government policies discussed include unemployment insurance, public works, the Special Areas legislation, assistance in the construction of the 534 "Queen Mary" and the direction of financial support to areas of particular need. Amongst local authority actions described are additional local support for the poor, public works, efforts to attract new industry to the town, attempts to deal with the housing problem which was particularly acute at times of high unemployment and measures to maintain health standards in the community. In Part IV the responses of the community to unemployment and government policies are detailed. The burgh's commercial sector is surveyed as are developments in leisure provision, religion, temperance and crime, and local politics. A number of individual responses are also given consideration such as migration, commuting, changes in birth and marriage rates and suicide.
Resumo:
Background: The ageing population, with concomitant increase in chronic conditions, is increasing the presence of older people with complex needs in hospital. People with dementia are one of these complex populations and are particularly vulnerable to complications in hospital. Registered nurses can offer simultaneous assessment and intervention to prevent or mitigate hospital-acquired complications through their skilled brokerage between patient needs and hospital functions. A range of patient outcome measures that are sensitive to nursing care has been tested in nursing work environments across the world. However, none of these measures have focused on hospitalised older patients. Method: This thesis explores nursing-sensitive complications for older patients with and without dementia using an internationally recognised, risk-adjusted patient outcome approach. Specifically explored are: the differences between rates of complications; the costs of complications; and cost comparisons of patient complexity. A retrospective cohort study of an Australian state’s 2006–07 public hospital discharge data was utilised to identify patient episodes for people over age 50 (N=222,440) where dementia was identified as a primary or secondary diagnosis (N=44,422). Extra costs for patient episodes were estimated based on length of stay (LOS) above the average for each patient’s Diagnosis Related Group (DRG) (N=157,178) and were modelled using linear regression analysis to establish the strongest patient complexity predictors of cost. Results: Hospitalised patients with a primary or secondary diagnosis of dementia had higher rates of complications than did their same-age peers. The highest rates and relative risk for people with dementia were found in four key complications: urinary tract infections; pressure injuries; pneumonia, and delirium. While 21.9% of dementia patients (9,751/44,488, p<0.0001) suffered a complication, only 8.8% of non-dementia patients did so (33,501/381,788, p<0.0001), giving dementia patients a 2.5 relative risk of acquiring a complication (p<0.0001). These four key complications in patients over 50 both with and without dementia were associated with an eightfold increase in length of stay (813%, or 3.6 days/0.4 days) and double the increased estimated mean episode cost (199%, or A$16,403/ A$8,240). These four complications were associated with 24.7% of the estimated cost of additional days spent in hospital in 2006–07 in NSW (A$226million/A$914million). Dementia patients accounted for 22.0% of these costs (A$49million/A$226million) even though they were only 10.4% of the population (44,488/426,276 episodes). Hospital-acquired complications, particularly for people with a comorbidity of dementia, cost more than other kinds of inpatient complexity but admission severity was a better predictor of excess cost. Discussion: Four key complications occur more often in older patients with dementia and the high rate of these complications makes them expensive. These complications are potentially preventable. However, the care that can prevent them (such as mobility, hydration, nutrition and communication) is known to be rationed or left unfinished by nurses. Older hospitalised people who have complex needs, such as those with dementia, are more likely to experience care rationing as their care tends to take longer, be less predictable and less curative in nature. This thesis offers the theoretical proposition that evidence-based nursing practices are rationed for complex older patients and that this rationed care contributes to functional and cognitive decline during hospitalisation. This, in turn, contributes to the high rates of complications observed. Thus four key complications can be seen as a ‘Failure to Maintain’ complex older people in hospital. ‘Failure to Maintain’ is the inadequate delivery of essential functional and cognitive care for a complex older person in hospital resulting in a complication, and is recommended as a useful indicator for hospital quality. Conclusions: When examining extra length of stay in hospital, complications and comorbid dementia are costly. Complications are potentially preventable, and dementia care in hospitals can be improved. Hospitals and governments looking to decrease costs can engage in risk-reduction strategies for common nurse sensitive complications such as healthy nursing work environments that minimise nurses’ rationing of functional and cognitive care. The conceptualisation of complex older patients as ‘business as usual’ rather than a ‘burden’ is likely necessary for sustainable health care services of the future. The use of the ‘Failure to Maintain’ indicators at institution and state levels may aid in embedding this approach for complex older patients into health organisations. Ongoing investigation is warranted into the relationships between the largest health services expense (hospitals), the largest hospital population (complex older patients), and the largest hospital expense (nurses). The ‘Failure to Maintain’ quality indicator makes a useful and substantive contribution to further clinical, administrative and research developments.
Resumo:
Objectives To examine the associations between economic and noneconomic factors and psychological distressin a group of 748 unemployed adults during economic recession. Methods Data were collected through a questionnaire. Bivariate and logistic regression analyses were used to test the associations between distress and the deprivation of income and latent benefits of employment (time structure, activity, status, collective purpose and social contact). Results The participants’ mean of distress was higher than the national population mean, and 46.5% of the participants scored above that. All economic and noneconomic factors emerged as strong predictors of distress; particularly financial deprivation (OR 1.06; CI 95 % 1.04–1.09) and lack of structured time (OR 1.07; CI 95 % 1.05–1.09). Women (OR 1.40; CI 95 % 1.04–1.86) and people with lower education levels (OR 0.45; CI 95 % 0.34–0.61) were more affected. Conclusions The unemployed individuals score high on distress, especially those facing financial strain and lack of structured time, and women and individuals with lower education in particular. Given the recessionary context and high unemployment rates, these insights raise awareness for policies and actions targeting the needs of unemployed people.
Resumo:
Mestrado em Finanças
Resumo:
The thermal decomposition of a solid recovered fuel has been studied using thermogravimetry, in order to get information about the main steps in the decomposition of such material. The study comprises two different atmospheres: inert and oxidative. The kinetics of decomposition is determined at three different heating rates using the same kinetic constants and model for both atmospheres at all the heating rates simultaneously. A good correlation of the TG data is obtained using three nth-order parallel reactions.
Resumo:
Background: Preterm labor, which defines as live-birth delivery before 37 weeks of gestation is a main determinant of neonatal morbidity and mortality around the world. Objective: The aim of this study was to determine the prevalence of preterm labor in Iran by a meta-analysis study, to be as a final measure for policy makers in this field. Materials and Methods: In this meta-analysis, the databases of Thomson database (Web of Knowledge), PubMed/Medline, Science Direct, Scopus, Google Scholar, Iranmedex, Scientific Information Database (SID), Magiran, and Medlib were searched for articles in English and Persian language published between 1995 and 2014. Among the studies with regard to the inclusion and exclusion criteria, 14 studies (out of 1370 publications) were selected. Data were analyzed by using Stata software version 11. The heterogeneity of reported prevalence among studies was evaluated by the Chi-square based Q test and I2 statistics. Results: The results of Chi-square based on Q test and I2 statistics revealed severe heterogeneity (Q=2505.12, p-value < 0.001 and I2= 99.5%) and consequently, the random effect model was used for the meta-analysis. Based on the random effect model, the overall estimated prevalence of preterm in Iran was 9.2% (95% CI: 7.6 – 10.7). Conclusion: Present study summarized the results of previous studies and provided a comprehensive view about the preterm delivery in Iran. In order to achieve a more desirable level and its reduction in the coming years, identifying affecting factor and interventional and preventive actions seem necessary.
Resumo:
Firms in China within the same industry but with different ownership and size have very different production functions and can face very different emission regulations and financial conditions. This fact has largely been ignored in most of the existing literature on climate change. Using a newly augmented Chinese input–output table in which information about firm size and ownership are explicitly reported, this paper employs a dynamic computable general equilibrium (CGE) model to analyze the impact of alternative climate policy designs with respect to regulation and financial conditions on heterogeneous firms. The simulation results indicate that with a business-as-usual regulatory structure, the effectiveness and economic efficiency of climate policies is significantly undermined. Expanding regulation to cover additional firms has a first-order effect of improving efficiency. However, over-investment in energy technologies in certain firms may decrease the overall efficiency of investments and dampen long-term economic growth by competing with other fixed-capital investments for financial resources. Therefore, a market-oriented arrangement for sharing emission reduction burden and a mechanism for allocating green investment is crucial for China to achieve a more ambitious emission target in the long run.
Resumo:
Since children already use and explore applications on smartphones, we use this as the starting point for design. Our monitoring and analysis framework, BaranC, enables us to discover and analyse which applications children uses and precisely how they interact with them. The monitoring happens unobtrusively in the background so children interact normally in their own natural environment without artificial constraints. Thus, we can discover to what extent a child of a particular age engages with, and how they physically interact with, existing applications. This information in turn provides the basis for design of new child-centred applications which can then be subject to the same comprehensive child use analysis using our framework. The work focuses on the first aspect, namely, the monitoring and analysis of current child use of smartphones. Experiments show the value of this approach and interesting results have been obtained from this precise monitoring of child smartphone usage.
Resumo:
Mechanical fatigue is a failure phenomenon that occurs due to repeated application of mechanical loads. Very High Cycle Fatigue (VHCF) is considered as the domain of fatigue life greater than 10 million load cycles. Increasing numbers of structural components have service life in the VHCF regime, for instance in automotive and high speed train transportation, gas turbine disks, and components of paper production machinery. Safe and reliable operation of these components depends on the knowledge of their VHCF properties. In this thesis both experimental tools and theoretical modelling were utilized to develop better understanding of the VHCF phenomena. In the experimental part, ultrasonic fatigue testing at 20 kHz of cold rolled and hot rolled stainless steel grades was conducted and fatigue strengths in the VHCF regime were obtained. The mechanisms for fatigue crack initiation and short crack growth were investigated using electron microscopes. For the cold rolled stainless steels crack initiation and early growth occurred through the formation of the Fine Granular Area (FGA) observed on the fracture surface and in TEM observations of cross-sections. The crack growth in the FGA seems to control more than 90% of the total fatigue life. For the hot rolled duplex stainless steels fatigue crack initiation occurred due to accumulation of plastic fatigue damage at the external surface, and early crack growth proceeded through a crystallographic growth mechanism. Theoretical modelling of complex cracks involving kinks and branches in an elastic half-plane under static loading was carried out by using the Distributed Dislocation Dipole Technique (DDDT). The technique was implemented for 2D crack problems. Both fully open and partially closed crack cases were analyzed. The main aim of the development of the DDDT was to compute the stress intensity factors. Accuracy of 2% in the computations was attainable compared to the solutions obtained by the Finite Element Method.
Resumo:
The economic and financial crisis opened a window of opportunity to place the Single Market back on top of the European agenda as part of a two-tiered crisis response, which also included reinforced financial supervision and economic co-ordination. We argue that the Commission acted as a ‘purposeful opportunist’ in both tiers; but whereas in economic governance issues there was breakthrough change in the Commission's achievements and competences, in the Single Market realm policy change was fairly modest. Using process tracing analysis our goal is to explain why the Commission did not succeed in furthering a genuine Single Market reform. Our findings suggest that the Commission's entrepreneurship was constrained by the limited salience of Single Market issues in the crisis context and by the lack of actual political commitment from the other relevant stakeholders. Thus, our research highlights the limits of the Commission's opportunistic behaviour in less advantageous circumstances.
Resumo:
Amid the trend of rising health expenditure in developed economies, changing the healthcare delivery models is an important point of action for service regulators to contain this trend. Such a change is mostly induced by either financial incentives or regulatory tools issued by the regulators and targeting service providers and patients. This creates a tripartite interaction between service regulators, professionals, and patients that manifests a multi-principal agent relationship, in which professionals are agents to two principals: regulators and patients. This thesis is concerned with such a multi-principal agent relationship in healthcare and attempts to investigate the determinants of the (non-)compliance to regulatory tools in light of this tripartite relationship. In addition, the thesis provides insights into the different institutional, economic, and regulatory settings, which govern the multi-principal agent relationship in healthcare in different countries. Furthermore, the thesis provides and empirically tests a conceptual framework of the possible determinants of (non-)compliance by physicians to regulatory tools issued by the regulator. The main findings of the thesis are first, in a multi-principal agent setting, the utilization of financial incentives to align the objectives of professionals and the regulator is important but not the only solution. This finding is based on the heterogeneity in the financial incentives provided to professionals in different health markets, which does not provide a one-size-fits-all model of financial incentives to influence clinical decisions. Second, soft law tools as clinical practice guidelines (CPGs) are important tools to mitigate the problems of the multi-principal agent setting in health markets as they reduce information asymmetries while preserving the autonomy of professionals. Third, CPGs are complex and heterogeneous and so are the determinants of (non-)compliance to them. Fourth, CPGs work but under conditions. Factors such as intra-professional competition between service providers or practitioners might lead to non-compliance to CPGs – if CPGs are likely to reduce the professional’s utility. Finally, different degrees of soft law mandate have different effects on providers’ compliance. Generally, the stronger the mandate, the stronger the compliance, however, even with a strong mandate, drivers such as intra-professional competition and co-management of patients by different professionals affected the (non-)compliance.
Transatlantic regulatory divergence in pharmaceuticals: exploring economic and cultural explanations
Resumo:
The analysis delves into the regulatory divergence between the EU and the US in the pharmaceutical sector. Through law and economics, political science, and cultural theory perspectives, the study explores how collective preferences within each jurisdiction shape regulations. By identifying cultural orientations such as individualism in the US and hierarchy in the EU, the research suggests that underlying cultural factors play a significant role in regulatory decisions. Despite calls for regulatory harmonization, the recognition of legitimate differences in preferences due to cultural diversity emphasizes that uniformity may not always be the best solution, showcasing the importance of understanding cultural influences in shaping regulatory landscapes.
Resumo:
Hevea brasiliensis (Willd. Ex Adr. Juss.) Muell.-Arg. is the primary source of natural rubber that is native to the Amazon rainforest. The singular properties of natural rubber make it superior to and competitive with synthetic rubber for use in several applications. Here, we performed RNA sequencing (RNA-seq) of H. brasiliensis bark on the Illumina GAIIx platform, which generated 179,326,804 raw reads on the Illumina GAIIx platform. A total of 50,384 contigs that were over 400 bp in size were obtained and subjected to further analyses. A similarity search against the non-redundant (nr) protein database returned 32,018 (63%) positive BLASTx hits. The transcriptome analysis was annotated using the clusters of orthologous groups (COG), gene ontology (GO), Kyoto Encyclopedia of Genes and Genomes (KEGG), and Pfam databases. A search for putative molecular marker was performed to identify simple sequence repeats (SSRs) and single nucleotide polymorphisms (SNPs). In total, 17,927 SSRs and 404,114 SNPs were detected. Finally, we selected sequences that were identified as belonging to the mevalonate (MVA) and 2-C-methyl-D-erythritol 4-phosphate (MEP) pathways, which are involved in rubber biosynthesis, to validate the SNP markers. A total of 78 SNPs were validated in 36 genotypes of H. brasiliensis. This new dataset represents a powerful information source for rubber tree bark genes and will be an important tool for the development of microsatellites and SNP markers for use in future genetic analyses such as genetic linkage mapping, quantitative trait loci identification, investigations of linkage disequilibrium and marker-assisted selection.