998 resultados para Clone de eucalipto
Resumo:
Foram avaliadas três formas de parcelas experimentais (retangular, uma linha - linear e parcela de uma árvore - STP) em testes clonais de Eucalyptus spp, utilizando-se três experimentos, cada um com 18 clones. Foram usados três modelos de análise (mínimos quadrados ordinários - ANOVA tradicional, modelos mistos com fator clone fixo ou com fator clone aleatório - REML/BLUP). Os dois primeiros modelos apresentaram resultados similares. Com REML/BLUP houve estreitamento das predições em relação às amplitudes obtidas com as médias, e essa redução foi proporcionalmente maior com parcelas retangulares e STP. O ordenamento dos clones também foi similar com esses dois tipos de parcelas. É provável que com parcelas STP haja um balanço compensatório das alocompetições, pois se pode trabalhar com maior número de repetições e menor custo. Portanto, com parcelas STP haverá economia de recursos e sem prejuízos para o Programa de Melhoramento Florestal.
Resumo:
Um dos grandes problemas enfrentados em áreas de reflorestamento com o cultivo de eucalipto são as plantas daninhas, cujo manejo assume papel de destaque entre os tratos culturais e com reflexos diretos no rendimento e nos custos de produção. Trabalhos preliminares de pesquisa e observação de campo apontam para uma tolerância diferencial ao glyphosate entre os locais (folhas e caule) que este herbicida atinge. Nesse contexto, este trabalho teve como objetivo verificar a intoxicação e o desenvolvimento de plantas submetidas a subdoses de glyphosate e sua absorção em diferentes locais de aplicação na planta, simulando uma deriva. O experimento foi conduzido em casa de vegetação, em um esquema fatorial, sendo quatro subdoses de glyphosate (40; 80; 160 e 240 g ha-1) e três locais de aplicação (folha, caule e da planta inteira), além de uma testemunha sem a aplicação de herbicidas. O herbicida glyphosate causou fitointoxicação à cultura do eucalipto, sendo crescente com o aumento das subdoses e com maior intensidade nas aplicações sobre o caule e a planta inteira, atingindo 75% aos 14 dias após aplicação. O ganho em altura de plantas e em diâmetro, em massa seca da parte aérea e da área foliar teve reduções significativas, que resultaram em perdas de até 58% na massa seca, 56% na área foliar e uma diferença de 6 cm no ganho em altura.
Geração de finos no branqueamento de pasta kraft de eucalipto e seu efeito nas propriedades do papel
Resumo:
Este trabalho teve por objetivo avaliar a quantidade de finos gerada por diferentes reagentes de branqueamento e seu efeito nas propriedades físicas e mecânicas da celulose kraft de eucalipto. A polpa foi branqueada por quatro sequências diferentes. Parte das amostras foi classificada em equipamento Bauer-McNett, sendo a parte não classificada (global) refinada para 40 ºSR, em moinho laboratorial PFI. As duas maiores porções de cada amostra proveniente da classificação foram também refinadas com o mesmo número de revoluções que a sua amostra global. Realizaram-se ensaios físicos e mecânicos das amostras refinadas, e suas fibras foram analisadas em equipamento FQA (Fiber Quality Analyser), antes e depois do refino. A maior quantidade de finos foi observada nas polpas refinadas e na sequência-referência. Os resultados de tração foram mais elevados e significativos nas amostras globais; as polpas classificadas não apresentaram diferença entre si, sendo atribuída a maior resistência à tração na presença de finos. A resistência ao rasgo foi afetada pelo comprimento das fibras e não pelo teor de finos. Os maiores valores de ascensão capilar Klemm ocorreram nas amostras classificadas em razão da ausência de finos e do maior comprimento de fibras.
Resumo:
Com o objetivo de verificar possível efeito alelopático de 18 espécies de plantas daninhas sobre o crescimento inicial de Eucalyptus grandis, realizaram-se dois experimentos em casa de vegetação. No primeiro experimento, dentre 18 espécies de plantas daninhas testadas, Brachiaria decumbens (BRADC) demonstrou acentuada capacidade de reduzir o crescimento de Eucalyptus grandis, quando incorporada ao solo. No segundo experimento avaliou-se o efeito da adição no substrato de concentrações de matéria seca de BRADC sobre o crescimento inicial de mudas de E. grandis. A matéria seca triturada de BRADC foi incorporada ao solo nas concentrações de 0% (testemunha), 0,5%, 1,0%, 2,0% e 3,0% (p/p). Instalou-se também uma réplica do experimento, com adição de idênticas quantidades totais de carbono entre os tratamentos. O ajuste da quantidade de carbono foi feito através da adição de Sphagnum. Extraiu-se a solução do solo por meio de cápsulas de porcelana introduzidas nos vasos quando do transplante das mudas de eucalipto. As soluções foram coletadas ao final do experimento (39 dias após o transplante das mudas), sendo utilizadas para a determinação de pH, condutividade elétrica, potencial osmótico e para análise de teores de nutrientes. As mínimas proporções de BRADC, com efeito inibitório, foram de 0,5 e 1,0%, com e sem Sphagnum, respectivamente. Nestas duas condições, a área foliar média do eucalipto foi reduzida em 24 e 23%, respectivamente. As análises de solução do solo dos tratamentos permitiram concluir que os teores de nutrientes e as características químicas destes foram pouco alterados pelos tratamentos, sendo pouco provável que a redução do crescimento do E. grandis se deva às restrições nas quantidades de nutrientes disponíveis.
Resumo:
Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)
Resumo:
O alto investimento em operações agroflorestais mecanizadas implica a definição segura de qual será a máquina mais preconizada para a otimização da operação, vinculada aos menores custos envolvidos. Este estudo teve como objetivo avaliar o desempenho operacional e econômico da operação silvicultural de irrigação pós-plantio de eucalipto a campo. A análise técnica englobou um estudo de tempos e movimentos e, a análise econômica, as variáveis do custo operacional, custo de produção e rendimento energético. Os resultados obtidos evidenciaram que, para áreas de reflorestamento de eucalipto em primeira e terceira rotação, não há uma diferença da capacidade de campo efetiva para a operação de irrigação pós-plantio. em decorrência do dispêndio com tempos improdutivos, houve uma redução significativa na capacidade de campo operacional e, consequentemente, uma elevação no custo de produção.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Identification of bacteria in endodontic infections by sequence analysis of 16S rDNA clone libraries
Resumo:
A significant proportion of oral bacteria are unable to undergo cultivation by existing techniques. In this regard, the microbiota from root canals still requires complementary characterization. The present study aimed at the identification of bacteria by sequence analysis of 16S rDNA clone libraries from seven endodontically infected teeth. Samples were collected from the root canals, subjected to the PCR with universal 16S rDNA primers, cloned and partially sequenced. Clones were clustered into groups of closely related sequences (phylotypes) and identification to the species level was performed by comparative analysis with the GenBank, EMBL and DDBJ databases, according to a 98 % minimum identity. All samples were positive for bacteria and the number of phylotypes detected per subject varied from two to 14. The majority of taxa (65(.)2 %) belonged to the phylum Firmicutes of the Gram-positive bacteria, followed by Proteobacteria (10(.)9 %), Spirochaetes (4(.)3 %), Bacteroidetes (6(.)5 %), Actinobacteria (2(.)2 %) and Deferribacteres (2(.)2 %). A total of 46 distinct taxonomic units was identified. Four clones with low similarity to sequences previously deposited in the databases were sequenced to nearly full extent and were classified taxonomically as novel representatives of the order Clostridiales, including a putative novel species of Mogibacterium. The identification of novel phylotypes associated with endodontic infections suggests that the endodontium may still harbour a relevant proportion of uncharacterized taxa.
Resumo:
The buttonweed (Spermacoce latifolia) is becoming a plant among the most current infesting eucalypts plantation in State of São Paulo due to the continual use of same herbicides and control methods. Owing this, this work aimed to evaluate the effects of periods of company and control of S. Iatifolia on the initial growth of Eucalyptus grandis, planted in winter and summer. Only one seedling of Eucalyptus was planted in amianthus cement box and submitted for crescent periods of company and control of S. Iatifolia (0, 20, 60 and 80 days in competition or not). The densities of plants of S. Iatifolia were 4 and 16 plants per m 2 (under winner and summer conditions). The experimental period was 100 days after the planting (DAP). The experimental design for both experiments was the completely randomized blocks (CRB) with ten treatments and four replicates. The results of plant high, stem diameter, dries weights and leaf area showed that the before interference period (BIP), whole period of prevention for interference (WPPI) and critical period of prevention for interference (CPPI) were 40, 60, and 60 DAR, respectively, under winner conditions. Under summer conditions, the WPPI and CPPI were 20, 80 and 20 to 80 DAR.
Resumo:
This paper reports the occurrence of the longhorn beetle Phoracantha recurva Newman (Coleoptera: Cerambycidae) attacking Eucalyptus citriodora logs in the State of São Paulo, Brazil. This Australian species was introduced in the country and is considered a quarentenary pest because it may negatively influence the exporting of eucalypts logs. Details on the biology, damage and control, as well as the different morphological characteristics between P. recurva and P. semipunctata are discussed.
Resumo:
Two field trial were conducted in Eucalyptus grandis W. Hill ex Maiden x Eucalyptus urophylla S.T. Blake crops at Três Lagoas, Mato Grosso do Sul State and Brotas, São Paulo State, Brazil, to evaluate the effects of weed control in strip of different width on the Eucalyptus plant growth. The experiments consisted of two groups treatments: group 1 - with constant width control strips being kept during the first 12 months, i.e., at 0, 25, 50, 100, 125 and 150cm on each side of the Eucalyptus row and, group 2: with increasing width control strips being adopted along the experimental period, i.e., at 25 to 150, 25-50-150, 50 to 150, 50-125-150, 100-125-150, 100 tot 150 and 125 to 150 cm on each side of the Eucalyptus row during the first 12 months. At 49 moths after planting it was verified that the Eucalyptus plants that had grown both in the constant and increasing width control strips, equal to or higher than 100 and 50 cm, respectively, showed higher steam diameter, plant height, volume and annual increment average of wood. These results led to the conclusion that the minimum control strip width should be 100 cm on each side of the Eucalyptus row in order to keep the crop free of weed interference.
Resumo:
The objective of this study was to evaluate the feasibility of the biosolids used as substrate component for seedlings production of Eucalyptus. This way, different proportions of biosolid/carbonized rice (80/20, 70/30, 60/40, 50/05 and 40/60) were tested as substrates in mixture, which were compared to the common substrate used by forest nursery (Multiplant®), as control. The experiment was established with Eucalyptus grandis where growth seedlings-related parameters were assessed: shoot height, collar diameter, accumulation of dry matter on the shoot and root, chemical analysis of the vegetal tissue of aerial part and root, foliar area and chlorophyll content. The results revealed that Eucalypts seedlings developed in substrate with 50% biosolid were similar to the control in relation to the evaluated parameters, concluding that the use of biosolids for seedlings production is quite promising.
Resumo:
The erosion caused by running water constitutes important cause of environmental degradation and productivity reduction, which justifies its evaluation in areas of eucalypt commercial plantations, mainly in ondulated slope conditions. The present study was intended to evaluate the influence of different management systems, in an undulated eucalypt pos-planting area, upon soil and water losses by erosion. The experiment was installed in a very clayey Red Latosol (Oxisol) under three eucalypt management systems (downhill planting with burning of crop residues - EDq; downhill planting with maintenance of crop residues on soil surface - ED; level planting with maintenance of crop residues on soil surface - EN), native forest (FN), bare soil (SD), and native pasture (PN). The soil and water losses evaluations were performed in standard plots installed in the field. All eucalypt systems presented very low values of soil losses in relation to the established tolerance limit, indicating the adequacy of these management systems concerning water erosion. The sustainability of these environments regarding erosion is indicated by the fact that soil losses in eucalipt were very close to those observed in native forest (reference).
Resumo:
In DNA microarray experiments, the gene fragments that are spotted on the slides are usually obtained by the synthesis of specific oligonucleotides that are able to amplify genes through PCR. Shotgun library sequences are an alternative to synthesis of primers for the study of each gene in the genome. The possibility of putting thousands of gene sequences into a single slide allows the use of shotgun clones in order to proceed with microarray analysis without a completely sequenced genome. We developed an OC Identifier tool (optimal clone identifier for genomic shotgun libraries) for the identification of unique genes in shotgun libraries based on a partially sequenced genome; this allows simultaneous use of clones in projects such as transcriptome and phylogeny studies, using comparative genomic hybridization and genome assembly. The OC Identifier tool allows comparative genome analysis, biological databases, query language in relational databases, and provides bioinformatics tools to identify clones that contain unique genes as alternatives to primer synthesis. The OC Identifier allows analysis of clones during the sequencing phase, making it possible to select genes of interest for construction of a DNA microarray. ©FUNPEC-RP.
Resumo:
The rule creation to clone selection in different projects is a hard task to perform by using traditional implementations to control all the processes of the system. The use of an algebraic language is an alternative approach to manage all of system flow in a flexible way. In order to increase the power of versatility and consistency in defining the rules for optimal clone selection, this paper presents the software OCI 2 in which uses process algebra in the flow behavior of the system. OCI 2, controlled by an algebraic approach was applied in the rules elaboration for clone selection containing unique genes in the partial genome of the bacterium Bradyrhizobium elkanii Semia 587 and in the whole genome of the bacterium Xanthomonas axonopodis pv. citri. Copyright© (2009) by the International Society for Research in Science and Technology.