Exploring several nonconventional interactions of ice-binding proteins

Traditionally, ice-binding proteins (IBPs), also known as antifreeze proteins (AFPs), have been defined by two universal activities: ice recrystallization inhibition and thermal hysteresis. However, there remains the possibility IBPs have other complementary functions given the diversity found within this protein group. This thesis explores some of these in both natural and applied settings, in the hopes of furthering our understanding of this remarkable group of proteins. Plant IBPs could function as part of a defensive strategy against ice nucleators produced by certain pathogens. To assess this hypothesis, recombinant IBPs from perennial ryegrass and purple false brome were combined with the ice nucleation protein (INP) from the plant pathogen, Pseudomonas syringae. Strikingly, the plant proteins depressed the freezing point of the bacterial INP, while a fish AFP could not, nor did the INPs have any effect on IBP activity. Thus, the interaction between these two different proteins suggests a role in plant defensive strategies against pathogenic bacteria as another IBP function. In addition, the potential use of hyperactive insect IBPs in organ preservation was investigated. Current kidney preservation techniques involve storing the organ at 4 °C for a maximum of 24 h prior to transplantation. Extending this “safe” time would have profound effects on renal transplants, however, ischemic injury is prevalent when storage periods are prolonged. Experiments described here allowed subzero preservation for 72 h with the addition of a beetle IBP to CryoStasis® solution. Kidneys stored using the traditional technique for 24 h and the method developed here for 72 h showed similar levels of biomarker enzymes, underscoring the potential utility of insect IBPs for future transplant purposes. Finally, IBP function in the freeze-tolerant gall fly, Eurosta solidaginis, was examined. Larvae representing the mid-autumn stage displayed ice-binding activity, suggesting an IBP is being expressed, possibly as a protective measure against freezing damage when fall temperatures can unpredictably drop. IBP activity was also observed in the larvae’s host plant, Solidago spp. Mass spectrometry analysis of ice-affinity purified plant extracts provided three candidate pathogenesis-related proteins that could be responsible for the detected activity, further demonstrating additional functions of IBPs.

Landfill Leachate Toxicity to Oncorhynchus mykiss (Rainbow Trout) at the Merrick Landfill

At the Merrick Landfill, located outside of North Bay (Ontario, CA), an investigation into the potential for an environmental impact to the Little Sturgeon River as a result of landfill leachate discharge was undertaken using toxicity testing using 96 hour acute lethality on Oncorhynchus mykiss (Rainbow Trout). Landfill leachate may present a risk to receiving environments as it is comprised of an array of chemicals including organics, ammonia, and metals. Testing was conducted in three phases, firstly testing was completed on site throughout an existing natural attenuation zone where the presence of several groundwater seeps down gradient of the site had been identified to determine the effectiveness of the existing leachate control features at reducing the environmental risks. These tests indicated that the existing capture strategies were largely effective at reducing toxicity risks to the receiving environment. Testing was also completed on two pilot-scale hybrid-passive treatment systems to determine their effectiveness for leachate treatment. Summer performance of a constructed gravel wetland system was also shown to be effective at reducing the toxicity of the landfill leachate at the site. Lastly in order to support evaluation of leachate treatment requirements, a toxicity identification evaluation (TIE) was performed to determine the principle cause of toxicity within the leachate. Based on water chemistry analyses of samples collected at various locations at the site, the TIE identified ammonia toxicity as the primary source of toxicity in the leachate, with a secondary focus on metal toxicity.

MRI Registration for Human Hip Kinematics

Measurement of joint kinematics can provide knowledge to help improve joint prosthesis design, as well as identify joint motion patterns that may lead to joint degeneration or injury. More investigation into how the hip translates in live human subjects during high amplitude motions is needed. This work presents a design of a non-invasive method using the registration between images from conventional Magnetic Resonance Imaging (MRI) and open MRI to calculate three dimensional hip joint kinematics. The method was tested on a single healthy subject in three different poses. MRI protocols for the conventional gantry, high-resolution MRI and the open gantry, lowresolution MRI were developed. The scan time for the low-resolution protocol was just under 6 minutes. High-resolution meshes and low resolution contours were derived from segmentation of the high-resolution and low-resolution images, respectively. Low-resolution contours described the poses as scanned, whereas the meshes described the bones’ geometries. The meshes and contours were registered to each other, and joint kinematics were calculated. The segmentation and registration were performed for both cortical and sub-cortical bone surfaces. A repeatability study was performed by comparing the kinematic results derived from three users’ segmentations of the sub-cortical bone surfaces from a low-resolution scan. The root mean squared error of all registrations was below 1.92mm. The maximum range between segmenters in translation magnitude was 0.95mm, and the maximum deviation from the average of all orientations was 1.27◦. This work demonstrated that this method for non-invasive measurement of hip kinematics is promising for measuring high-range-of-motion hip motions in vivo.

Geometry of Dirac Operators

Thesis (Master, Mathematics & Statistics) -- Queen's University, 2016-07-04 20:27:20.386

Stress Inversion Using LiDAR Tunnel Deformation Measurements

Far-field stresses are those present in a volume of rock prior to excavations being created. Estimates of the orientation and magnitude of far-field stresses, often used in mine design, are generally obtained by single-point measurements of stress, or large-scale, regional trends. Point measurements can be a poor representation of far-field stresses as a result of excavation-induced stresses and geological structures. For these reasons, far-field stress estimates can be associated with high levels of uncertainty. The purpose of this thesis is to investigate the practical feasibility, applications, and limitations of calibrating far-field stress estimates through tunnel deformation measurements captured using LiDAR imaging. A method that estimates the orientation and magnitude of excavation-induced principal stress changes through back-analysis of deformation measurements from LiDAR imaged tunnels was developed and tested using synthetic data. If excavation-induced stress change orientations and magnitudes can be accurately estimated, they can be used in the calibration of far-field stress input to numerical models. LiDAR point clouds have been proven to have a number of underground applications, thus it is desired to explore their use in numerical model calibration. The back-analysis method is founded on the superposition of stresses and requires a two-dimensional numerical model of the deforming tunnel. Principal stress changes of known orientation and magnitude are applied to the model to create calibration curves. Estimation can then be performed by minimizing squared differences between the measured tunnel and sets of calibration curve deformations. In addition to the back-analysis estimation method, a procedure consisting of previously existing techniques to measure tunnel deformation using LiDAR imaging was documented. Under ideal conditions, the back-analysis method estimated principal stress change orientations within ±5° and magnitudes within ±2 MPa. Results were comparable for four different tunnel profile shapes. Preliminary testing using plastic deformation, a rough tunnel profile, and profile occlusions suggests that the method can work under more realistic conditions. The results from this thesis set the groundwork for the continued development of a new, inexpensive, and efficient far-field stress estimate calibration method.

Constructing the Vulvar Pain Assessment Questionnaire Inventory

The goals of this program of research were to examine the link between self-reported vulvar pain and clinical diagnoses, and to create a user-friendly assessment tool to aid in that process. These goals were undertaken through a series of four empirical studies (Chapters 2-6): one archival study, two online studies, and one study conducted in a Women’s Health clinic. In Chapter 2, the link between self-report and clinical diagnosis was confirmed by extracting data from multiple studies conducted in the Sexual Health Research Laboratory over the course of several years. We demonstrated the accuracy of diagnosis based on multiple factors, and explored the varied gynecological presentation of different diagnostic groups. Chapter 3 was based on an online study designed to create the Vulvar Pain Assessment Questionnaire (VPAQ) inventory. Following the construct validation approach, a large pool of potential items was created to capture a broad selection of vulvar pain symptoms. Nearly 300 participants completed the entire item pool, and a series of factor analyses were utilized to narrow down the items and create scales/subscales. Relationships were computed among subscales and validated scales to establish convergent and discriminant validity. Chapters 4 and 5 were conducted in the Department of Obstetrics & Gynecology at Oregon Health & Science University. The brief screening version of the VPAQ was employed with patients of the Program in Vulvar Health at the Center for Women’s Health. The accuracy and usefulness of the VPAQscreen was determined from the perspective of patients as well as their health care providers, and the treatment-seeking experiences of patients was explored. Finally, a second online study was conducted to confirm the factor structure, internal consistency, and test-retest reliability of the VPAQ inventory. The results presented in these chapters confirm the link between targeted questions and accurate diagnoses, and provide a guideline that is useful and accessible for providers and patients.

Inhibitory Control is a Rate-Limiting Factor to Preschoolers' Use of Irregular Inflection

We investigated whether children’s inhibitory control is associated with their ability to produce irregular verb forms as well as learn from corrective feedback following their use of an over-regularized form. Forty-eight 3.5 to 4.5 year old children were tested on the irregular past tense and provided with adult corrective input via models of correct use or recasts of errors following ungrammatical responses. Inhibitory control was assessed with a three-item battery of tasks that required suppressing a prepotent response in favor of a non-canonical one. Results showed that inhibitory control was predictive of children’s initial production of irregular forms and not associated with their post-feedback production of irregulars. These findings show that children’s executive functioning skills may be a rate-limiting factor on their ability to produce correct forms, but might not interact with their ability to learn from input in this domain. Findings are discussed in terms of current theories of past-tense acquisition and learning from input more broadly.

BIDIRECTIONAL AC-DC CONVERTERS USING ONE CYCLE CONTROL (OCC) FOR ELECTRIC VEHICLES

The electric vehicle (EV) market has seen a rapid growth in the recent past. With an increase in the number of electric vehicles on road, there is an increase in the number of high capacity battery banks interfacing the grid. The battery bank of an EV, besides being the fuel tank, is also a huge energy storage unit. Presently, it is used only when the vehicle is being driven and remains idle for rest of the time, rendering it underutilized. Whereas on the other hand, there is a need of large energy storage units in the grid to filter out the fluctuations of supply and demand during a day. EVs can help bridge this gap. The EV battery bank can be used to store the excess energy from the grid to vehicle (G2V) or supply stored energy from the vehicle to grid (V2G ), when required. To let power flow happen, in both directions, a bidirectional AC-DC converter is required. This thesis concentrates on the bidirectional AC-DC converters which have a control on power flow in all four quadrants for the application of EV battery interfacing with the grid. This thesis presents a bidirectional interleaved full bridge converter topology. This helps in increasing the power processing and current handling capability of the converter which makes it suitable for the purpose of EVs. Further, the benefit of using the interleaved topology is that it increases the power density of the converter. This ensures optimization of space usage with the same power handling capacity. The proposed interleaved converter consists of two full bridges. The corresponding gate pulses of each switch, in one cell, are phase shifted by 180 degrees from those of the other cell. The proposed converter control is based on the one-cycle controller. To meet the challenge of new requirements of reactive power handling capabilities for grid connected converters, posed by the utilities, the controller is modified to make it suitable to process the reactive power. A fictitious current derived from the grid voltage is introduced in the controller, which controls the converter performance. The current references are generated using the second order generalized integrators (SOGI) and phase locked loop (PLL). A digital implementation of the proposed control ii scheme is developed and implemented using DSP hardware. The simulated and experimental results, based on the converter topology and control technique discussed here, are presented to show the performance of the proposed theory.

Please Stop Rubbing Your Relationship In My Face(book): An Investigation of Online Romantic Social Comparison

It is well-documented that social networking sites such as Facebook set the stage for social comparison. Such comparison has been linked to a number of negative outcomes including envy, negative moods, and lower self-esteem. The present research aims to extend current understanding of online social comparison by investigating how it pertains to romantic relationships. I hypothesized that for individuals high in attachment anxiety (compared to those low in this construct), online romantic social comparison might be related to negative consequences—which, in the current project, was operationalized as lower mood/affect and state self-esteem. Further, I hypothesized that there would be an interaction between attachment anxiety and relationship insecurities on these negative outcomes, such that the expected difference of attachment anxiety would be more pronounced under conditions priming relationship insecurities, relative to a control condition. Two experiments were conducted, one of which focused on single individuals, and the second focusing on individuals who were themselves in dating relationships. The paradigms of each entailed experimental manipulation of a key relationship-related variable (for single individuals, pessimism for future relationships; for dating individuals, the presence or absence of rejection threat), subsequent exposure to romantic content from Facebook, and finally, measures of affect and state self-esteem. I discovered partial support for the hypothesis that some single individuals—particularly those with higher, rather than lower, attachment anxiety—do indeed report feeling more negative moods and lower state self-esteem following exposure to romantic online content, in contrast to single individuals who had instead viewed neutral online content. The association between attachment anxiety and negative outcome was especially pertinent if individuals had been primed to believe that their own future romantic prospects were grim, or if attention had been drawn to their singleness. Among dating individuals, less support for hypotheses was found; however, exploratory post-hoc analyses revealed a promising (albeit weak) trend indicating that reinvestigation of the current hypotheses would be prudent.

Papers relating to America. Presented to the House of commons, 1809.

Papers relating to the encounter between His Majesty's ship Leopard, and the American frigate Chesapeake.--Correspondence between Mr. Secretary Canning and Mr. Pinkney, from September 23, to November 28, 1808.--Instructions to the Honourable D. M. Erskine, by Mr. Secretary Canning; and the correspondence between the Honourable D. M. Erskine, and the Honourable Robert Smith.

Studies of the effects of the $1 minimum wage. Wage structure.

Locality studies have also been made.

Studies of the effects of the $1 minimum wage. Wage structure.

Locality studies have also been made.

Leadership across international borders: A case study of an environmental leader

This paper focuses on the story of a well-respected leader known for his tireless work in promoting and preserving the environment both within Australia and internationally. It highlights the contextual factors that have influenced and continue to influence his thinking about leadership as well as the key values he embodies as a leader. The paper begins by considering some of the salient leadership literature in the field. The next part of the paper reviews the qualitative methodology that steered the research for this paper. Following on, the paper provides a snapshot of the life forces and context that played an important role in shaping the leader’s views and practices. Finally, the paper provides an analytical discussion of the leader’s practices in the light of two well-known leadership frameworks.

A mulher sábia e a sabedoria mulher símbolos de co-inspiração Um estudo sobre a mulher em textos de Provérbios

Nos textos de Provérbios 1,20-23; 8 e 9, encontra-se o instigante símbolo da sabedoria mulher, que possui uma longa e controvertida história de interpretação. Ao analisar as ligações textuais entre estes textos e o poema de Pr 31, descobrimos que o símbolo da sabedoria mulher inspira-se na mulher da vida real, que participa corajosamente na reconstrução da história e das relações do povo de Judá, no período pós-exílico. Estas ligações desvelam uma grande valorização da mulher e sua proximidade com Deus ao apresentá- la com o poder de oferecer vida (Pr 8,35; 9,6) e de cuidá-la (Pr 31), vivenciando e transmitindo valores éticos fundamentais para as relações cotidianas da casa (Pr 1,8; 6,20; 31,2-9.26). Este símbolo carrega ainda a memória de antigos cultos realizados na casa para celebrar e garantir a vida. Embora estes rituais contivessem a memória de Deusas, eles não eram opostos ao culto de Javé, pois, dentro da dinâmica da casa, estavam inteiramente integrados na religião de Israel pela priorização da vida e pela prática da jus tiça. Esses textos de Provérbios atestam uma grande mudança na visão da mulher. A origem desta nova visão encontra-se na época do cativeiro, quando já não havia templo e nem um governo que canalizasse a organização do povo e sua luta pela libertação. A casa passa a ter funções de prover a subsistência e de transmitir as tradições religiosas do povo bíblico com a finalidade de obter a inspiração e a força necessárias para garantir o futuro. Na casa interiorana, a mulher tem autoridade e liderança, apesar dos preconceitos da sociedade patriarcal. É no pequeno espaço da casa judaíta que o movimento da sabedoria mulher situa-se, gerando relações de inclusão e de solidariedade, na época da dominação do 2º templo, com suas normas sobre a impureza.(AU)

A generalized adaptive mathematical morphological filter for LIDAR data

Airborne Light Detection and Ranging (LIDAR) technology has become the primary method to derive high-resolution Digital Terrain Models (DTMs), which are essential for studying Earth's surface processes, such as flooding and landslides. The critical step in generating a DTM is to separate ground and non-ground measurements in a voluminous point LIDAR dataset, using a filter, because the DTM is created by interpolating ground points. As one of widely used filtering methods, the progressive morphological (PM) filter has the advantages of classifying the LIDAR data at the point level, a linear computational complexity, and preserving the geometric shapes of terrain features. The filter works well in an urban setting with a gentle slope and a mixture of vegetation and buildings. However, the PM filter often removes ground measurements incorrectly at the topographic high area, along with large sizes of non-ground objects, because it uses a constant threshold slope, resulting in "cut-off" errors. A novel cluster analysis method was developed in this study and incorporated into the PM filter to prevent the removal of the ground measurements at topographic highs. Furthermore, to obtain the optimal filtering results for an area with undulating terrain, a trend analysis method was developed to adaptively estimate the slope-related thresholds of the PM filter based on changes of topographic slopes and the characteristics of non-terrain objects. The comparison of the PM and generalized adaptive PM (GAPM) filters for selected study areas indicates that the GAPM filter preserves the most "cut-off" points removed incorrectly by the PM filter. The application of the GAPM filter to seven ISPRS benchmark datasets shows that the GAPM filter reduces the filtering error by 20% on average, compared with the method used by the popular commercial software TerraScan. The combination of the cluster method, adaptive trend analysis, and the PM filter allows users without much experience in processing LIDAR data to effectively and efficiently identify ground measurements for the complex terrains in a large LIDAR data set. The GAPM filter is highly automatic and requires little human input. Therefore, it can significantly reduce the effort of manually processing voluminous LIDAR measurements.