Efeito da aldosterona e da espironolactona na hipertrofia ventricular esquerda em pacientes com doença renal crônica em hemodiálise

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Seleção de motobombas para o setor sucroalcooleiro

This work has the purpose to explain how the sugar and alcohol sector works, detail all the processes which uses pumps and assist in the selection and specification of pumps attached with engines, that will make part in important industry processes in the manufacture of sugar and alcohol. A bibliographic revision about the working of sugar and alcohol sector and about pumps were made to help the analysis of a case. This case had the purpose to analyze the selected pumps that were part of a initial project of an industry which aimed a future expansion. The pumps that were selected to made part of the initial project were over dimensioned and were operating out of the best performance point, making the pumps inefficient because the expansion didn't happened. The solution was to select another pump with bigger performance and less power consumption to have a decrease in the energy consumption and in the operational costs of the industry and using the extra electric energy in the industry or selling it

Avaliação de funcionamento das bombas hidráulicas do sistema de tratamento de efluentes da Empresa Parker Hannifin

On the field of the projects of hydraulic systems exists a lot of worries when we talk about the calculate of hydraulic pumps. In this case some facts must be considerate: length of tubes, fluid characteristics, height gauge, temperature, pressure, characteristics of tubes, flow required and others. For that mathematic calculates must be developed with the objective to optimize hydraulic pumps and agree to find an ideal machine (that don't requires more energy than necessary or less energy than it requires; that is the more critical case, cause exists the risk that the fluid pumped do not agree to become in your destiny). The wrong calculate of this machine can super-size its, bringing an excessive energy consumption. Actually it's an important subject because we are in the age of lack of energy what turn it more expensive. So the correct sizing of a hydraulic pump is connected with the fact that you have to uses the enough energy resources avoiding waste. The calculate of ideal pump in the pumping system is studied during years and a lot of specialists in this subject develop equations and theories to calculate its. Some researches study about this subject and all of them become to the same conclusion: to find the ideal pump we have to know the characteristics of fluid (cinematic viscosity), the required flow , overall yield (overall of motor x overall of pump) the high gauge or discharge pressure and the loss of repression. The pressure drop can be calculated with different theories: using Hazen-Williams, Darcy e Weisbach or Chézy (1775 - that starts the researches to calculate the pressure drop). Although the most used theory and what is most near to reality is the Darcy's equation. So, in this job the Darcy's equation were choice to calculate the drop pressure that consider what kind of flow we are studying: laminar or turbulent. The determination of the best pump to be used in the ... ( complete abstract click eletronic access below)

Melhoria ergonômica e da condição de trabalho numa empresa automobilística

A indústria automobilística é uma das mais desenvolvida por oferecer produtos que empregam alta tecnologia. No entanto, seus processos implicam riscos à saúde dos colaboradores envolvidos diretamente com a produção. Por este motivo, o presente trabalho visa através de uma pesquisa-ação, implementar melhoria ergonômica e da condição de trabalho no posto de montagem da bomba d’água numa empresa automobilística alemã. Utilizou-se a método Kaizen como ferramenta para propor e implementar as melhorias adequadas para o posto. Foi realizada uma comparação entre o antes e depois do Kaizen e observou-se que com a implementação das melhorias foi possível eliminar os riscos, minimizando os riscos nas tarefas, portanto, preservando a saúde dos montadores

Ação dos inotrópicos e vasopressores na estabilização hemodinâmica em cães com choque séptico

Septic shock remains one of the most common challenges for the small animal practicing, presenting high mortality rates frequently associated with late identification of this syndrome, as well as an inappropriate treatment. In general, disruption of homeostasis occurs with an intense activation of inflammatory cascade, which leads to a damage to endothelial cells and an exposure to these cytokines, which will result in vasodilation and increased capillary permeability. Thus, there is a drop in blood pressure, even after aggressive fluid resuscitation. Therefore, drugs such as vasopressors, which act by increasing systemic vascular resistance, and inotropes, which have an effect on heart pump, should be administered in order to raise blood pressure, ensuring adequate tissue perfusion. The objective of this review was to gather information about the various drugs used in vasopressors/inotropes therapy, trying to explain the role of each one in different situations, in order to increase the survival rate in dogs affected with septic shock

Parâmetros oftálmicos em espécimes de Cuniculus paca criadas em cativeiro

Pós-graduação em Cirurgia Veterinária - FCAV

Modelo experimental de conjuntivite alérgica: efeito do tratamento farmacológico com a proteína anti-inflamatória galectina - 1

Pós-graduação em Genética - IBILCE

Análise dos métodos de cálculo de golpe de ariete em tubulações

This work studies the most commonly used methods and make comparisons and discussions of the findings made by each of them and the results provided by them. The objective of this research was to show that the method of characteristics is currently the most efficient method to perform these simulations because of its broad scope low simplifications, requirement allowing to consider every detail of the pipe and fluid. Manual calculations are performed and also a software capable of calculating this phenomenon for various situations, such as water pump, elevated tanks, valves and quick maneuver was developed. The software is based on the method of characteristics that is currently recommended by ABNT. These methods, and the results are obtained numerically and graphically are adopted pipes and amount of downstream conditions and in which will be applied. The conclusions reached showed that the Allievi method is widely used yet because of its efficiency and quick calculation for simple pipes. The method of characteristics, although a lot of work to be calculated due to the calculation is iterative process and requires a program to use it, is the only one that allows the calculation with all amount to the conditions situations and downstream of all the pipe possibilities found

Incorporação da apatita na superfície da liga Ti30ta empregando tratamento alcalino associado à eletrofiação de fibras de PCL

Pós-graduação em Engenharia Mecânica - FEG

Uso subconjuntival de lipossomas com rapamicina e tacrolimus tópico no tratamento de ceratoconjuntivite seca em cães

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Displasia ectodérmica hipohidrótica: un síndrome de interés para la odontología

Hypohidrotic ectodermal dysplasia (HED) is a rare disease of genetic etiology. The most frequent form is of recessive linked to X-chromosome inheritance with affected male and female carriers. It can occur through autosomal mutations, of the gene EDA1 gene being responsible for the majority of the cases. It is characterized by the triad: hypohidrosis, oligodontia and hypotrichosis. We present two cases of patients with HED in which we observed characteristic signs of this syndrome: delicate skin, sparce hair, eyebrows and eyelashes, periorbital wrinkles, perioral and periorbital hyperpigmentation, prominent lips, in addition the patient in case 2 also present the depressed nasal bridge. We also found decreased salivary and lacrimal secretion and maxillary hypoplasia in both cases. At the oral examination in case 1 the upper right and left deciduous canines and lower right deciduous canine were present, and in case 2 the upper and lower (right and left) deciduous canines and two upper (one right and other left) permanent incisors were present with altered morphology, all of these dental elements were healthy. The early dental treatment of patients with HED, especially in the presence of oligodontia, as observed in our cases, is important not only to provide a better quality of life for these patients in the short term, but also an attempt to minimize the changes in facial growth to which these patients are subject.

Ophthalmic parameters in adult Shih Tzu dogs

Ocular surface diseases are often diagnosed in brachycephalic dogs. The ophthalmic parameters of the Shih Tzu dogs are evaluated in this study since this breed is among the most commonly affected by these diseases. In this study, ophthalmic parameters of this breed were partly studied under physical restraint. Schirmer tear test, breakup time test, aesthesiometry, biomicroscopy, non-contact specular microscopy, laser flaremetry, applanation tonometry, ultrasonography and ophthalmoscopy were carried in 48 eyes of 24 male and female dogs, aged from two to four years, weighing between 5 and 10kg. All dogs were from a breeding kennel. Descriptive statistics were applied to the data. Mean and standard error for Schirmer tear test was 26.145±0.803mm min-1; breakup time test, 13.668±0.538s; and aesthesiometry, 2.395±0.071cm. The biomicroscopy evaluation showed that 70.83% of the eyes had medial entropion; 42% caruncular trichiasis; 33% distichiasis, 27% mild paracentral corneal opacity; and 13% corneal melanosis. Mean and standard error for endothelial cell density was 2221.591±20.161cells mm-2; endothelial cell hexagonality, 63.770±1.805%; endothelial cell area, 451.895±4.179mm2; central corneal thickness, 0.490±0.007 mm; laser flaremetry, 1.720±0.216PC ms-1; applanation tonometry, 16.118±0.460mmHg; axial length, 20.255±0.134mm; lens thickness, 6.624±0.031mm; anterior chamber, 4.064±0.109mm; and vitreous chamber, 9.565±0.054mm. Ophthalmoscopy findings were not different from previous reports for other breeds. The results showed that the ophthalmic Shih Tzu parameters did not differ from other breeds according to data in the literature, except for the breakup time and Cochet-Bonnet aesthesiometry.

Desenvolvimento e aplicação do Elisa indireto com a nucleoproteína recombinante (NPR) do vírus da doença de Newcastle

Pós-graduação em Medicina Veterinária - FCAV

Low levels of taurine introgression in the current Brazilian Nelore and Gir indicine cattle populations

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Ocular effects of retrobulbar block with different local anesthetics in healthy dogs

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)