Effect of fibers and whole grain content on quality attributes

Incorporation of fiber in cereals may lead to quality issues, thus decreasing consumer acceptance. This is partially due to deterioration of the microstructure, one of the primary quality attributes of cereals. The objective of this study was to better understand the mechanisms by which dietary fibers affect the quality of cereal products during extrusioncooking. The study quantified the effect of amount and type of fiber and whole grain on (i) texture, (ii) structure, and (iii) rehydration properties of extruded cereals. New innovative methods were applied and combined with traditional techniques to characterize both the structure and the rehydration properties. Extruded cereals were produced using a starch-based recipe (whole and wheat flours) and two sources of fibers (oat bran concentrate and wheat bran). The oat and wheat bran levels used in this study were 0, 10, and 20%. The different mixtures were extruded in a pilot twinscrew extruder BC21 (Clextral) and then sugar coated after drying. Mechanical properties of extruded cereals were investigated by compression test. The cellular structure was observed by X-ray tomography. The quality of coating (thickness, homogeneity) was analyzed by optical coherence tomography. The rehydration properties of such cereals in milk were evaluated by magnetic resonance imaging and optical coherence tomography. This work revealed that structure assessment of extruded cereals may lead to a better understanding of the effect of fiber addition on texture and rehydration properties. The application of innovative methods, such as optical coherence tomography and magnetic resonance imaging, was found to be useful to quantify the structural properties.

Comparison on the durability of different portland cements after five years exposure to sulfate and to sea water attack

Experimental research has been performed to relate specific cement characteristics to deterioration due to sulfate and sea water attack after five year exposure, and to study different test method suitability for sulfate and marine resistance. Sulfate resistance testing have been performed on mortar specimens made with fifteen cement types of statistically diverse chemical composition according to European standard EN 197-1, most of them with sulfate resistant properties according to Spanish regulations. Chemical and mechanical characteristics were studied to determine the variation in properties of selected cements. SO3 content, type and amount of additions, C3A, and C4AF content were used to examine relationships between these characteristics and the results of sulfate resistance. Mortar specimens testing using Na2SO4 as the aggressive medium according to ASTM 1012 (with w/c ratio adapted to prENV 196-X:1995) was performed using each type of cement; identical specimens were also stored in sea water, and in lime saturated water (blank condition), up to five year age. Additionally these cements were tested conforming ASTM 452 and Koch and Steinegger test. Recommended acceptance limits for sulfate resistance of cements concerning to each used test method were evaluated in order to explore their suitability. Relationships between cement characteristics, degradation, expansive products obtained by X-ray diffraction techniques and maximum expansion after applied storage treatments, were correlated at final age, to redefine cement characteristics for sulfate resistant and marine resistant Portland cement

Efecto de la fertilización orgánica y mineral en las propiedades del suelo, la emisión de los principales gases de efecto invernadero y en las diferentes fases fenológicas del cultivo de café (Coffea arabica L.)

El cultivo de café es de gran importancia a nivel mundial (ICO, 2011), y en el Ecuador ha sido uno de los cultivos más importantes en la generación de divisas (COFENAC, 2011). Sin embargo en los sistemas productivos de este país se puede apreciar el uso inapropiado de fertilizantes, lo que conlleva a una pérdida de nutrientes, por lo que es importante estudiar las dosis adecuadas para la fertilización tanto mineral como orgánica. El objetivo del trabajo fue evaluar el efecto de la fertilización mineral y orgánica en diferentes dosis en un monocultivo de café en la provincia de Loja, sobre las propiedades del suelo, la emisión de los principales gases que provocan el efecto invernadero y la fenología y productividad del cultivo. En la provincia de Loja (Ecuador) se seleccionó un área de 2.520 m2 en la que se establecieron 21 parcelas de café arábigo (Coffea arabica L.) var. caturra y se aplicó tres tratamientos con tres repeticiones de fertilización mineral y tres orgánicos con dosis: bajas minerales (MIN 1= 157 Kg NPK ha-1 año-1 para el primer año y 425 Kg NPK ha-1 año-1 para el segundo año), medias minerales (MIN 2= 325 Kg NPK ha-1 año-1 para el primer año y 650 Kg NPK ha-1 año-1 en el segundo año) y altas minerales (MIN 3= 487 y 875 Kg NPK ha-1 año-1 para el primer y segundo año respectivamente), bajas orgánicas (ORG 1= 147 Kg NPK ha-1 año-1 en el primer año y 388 Kg NPK ha-1 año-1 en el año dos), medias orgánicas (ORG 2= 265 Kg NPK ha-1 año-1 para el primer año y 541 Kg NPK ha-1 año-1 en el segundo año), altas orgánicas (ORG 3= 368 Kg NPK ha-1 año-1 para el primer año y 727 Kg NPK ha-1 año-1 en el segundo año) y fertilización cero (TES = sin fertilización). Se usó urea, roca fosfórica y muriato de potasio en la fertilización mineral y humus (Bioabor) en la orgánica, más un tratamiento testigo, cada tratamiento tuvo tres repeticiones. El tiempo de evaluación de los fertilizantes aplicados fue de dos años consecutivos, la fertilización se la realizó dos veces por año y en base a análisis del suelo y demandas nutricionales del cultivo. para determinar las características del suelo se realizó muestreos de suelos en cada parcela a una profundidad de 20 cm de estas muestras los parámetro iniciales determinados fueron: color (Munsell), textura (método del hidrómetro), pH (relación 1:2,5 suelo-agua), Materia orgánica (Walkey y Black), Nitrógeno (Micro Kjendahl), Fósforo (Bray y Kurtz), Potasio (Olsen), estos procesos se repitieron cada seis meses para poder evaluar los cambios de que se producen debido a la fertilización mineral y orgánica en el cultivo. Las emisiones de gases efecto invernadero desde el suelo al ambiente se determinaron por el método de cámara cerrada (Rondón, 2000) y la concentración por cromatografía de gases. Las mediciones fisiológicas (altura de planta, ancho de copa, grosor de tallo y producción) se las evaluó cada dos meses, a excepción de la producción que fue anual al término de cada cosecha. Además se realizó el análisis económico de la productividad del cultivo. El análisis estadístico de datos se lo realizó con el programa SPSS v. 17.0. Las medias fueron comprobadas mediante ANOVAS de un factor con test de Tukey (P < 0,05). El beneficio económico se estimó en términos de ingresos y gastos totales que se presentaron en el ensayo. Los resultados obtenidos al término del ensayo indican que los tratamientos MIN 2 y MIN 3 produjeron cambios más significativos en comparación con los otros tratamientos establecidos en la mejora de fertilidad del suelo, el pH ha sido menos afectado en la acidificación en comparación con los tratamientos orgánicos que se han acidificado mayormente; la materia orgánica (MO) tuvo incrementos considerablemente bueno en estos dos tratamientos, sin embargo fueron superados por los tratamientos de fertilización orgánica; el nitrógeno total (Nt )y el potasio (K) también presentaron mejores valores al termino del ensayo y el fósforo (P) mostro incrementos buenos aunque un poco menores que los de los tratamientos ORG 2 y ORG 3. En lo que respecta a las emisiones de gases efecto invernadero, los flujos acumulados de óxido nitroso (N2O) en los dos años han aumentado en todos los tratamientos en comparación con el tratamiento Testigo, pero de manera considerable y con mayores flujos en el tratamiento MIN 3 y MIN 2 que se podrían considerarse los de mayor contaminación por N2O al ambiente lo que se le atribuye a las dosis de fertilización mineral aplicadas en el periodo de investigación, los tratamiento MIN 1 y todos los tratamientos orgánicos muestran menores emisiones al ambiente. Las emisiones de metano (CH4) no muestran mayores diferencias de emisiones entre tratamientos, siendo los mayores emisores los tratamientos ORG 3 y ORG 2 posiblemente debido al abono orgánico y añadido al suelo; para las emisiones de dióxido de carbono (CO2) de manera similar al CH4 el tratamiento ORG 3 fue el que presento mayores emisiones, los flujos de CO2 al ambiente de los otros tratamientos fueron menores y no presentaron diferencias significativas entre ellos. La variables fisiológicas en todos los casos apoyaron al desarrollo de las plantas de café, esto al ser comparadas con el tratamiento Testigo, sin embargo las que alcanzaron las mayores altitudes, anchos de copas y diámetro de tallo fueron las plantas del tratamiento MIN 3, seguido del MIN 3, no mostrando significancia entre ellos, y para los tratamientos orgánicos el que presento muy buenos resultados en estas variables ha sido el ORG 3, el cual no presento diferencias significativas con el MIN 2, lo cual comprueba que la fertilización mineral es más efectiva en este caso frente a la orgánica. Para el primer año de producción el tratamiento mineral con fertilización MIN 3 es el que obtuvo mayor producción no presentando diferencia estadística con el tratamiento con el MIN 2, no obstante fueron significativamente mayores que los otros tratamientos. Vale indicar que también el tratamiento MIN 1 y el tratamiento ORG 3 han presentado una producción considerable de café no mostrando diferencias estadísticas entre ellos. Para el segundo año la producción el cultivo mostró mayores rendimientos que el primer año de evaluación en todos los tratamientos, esto debido a la fisiología propia del cultivo y por otra parte se atribuye a la adición de fertilizantes que se ha realizado durante todo el ensayo; de manera similar al anterior los tratamientos MIN 3 y MIN 2 obtuvieron mejores rendimientos, no enseñando diferencias estadísticas significativas entre ellos, no obstante el tratamiento mineral dosis MEDIA no presentó significancia estadística con el ORG 3. El benéfico económico ha resultado mayor en el tratamiento MIN 3 y MIN 2, aunque el tratamiento MIN 2, es el que obtiene la mejor relación costo-beneficio; los tratamientos ORG 2 y ORG 3 y Testigo has producido beneficios negativos para el productor. En cuanto a la parte ambiental se considera que los mejores tratamientos en cuanto ha cuidado ambiental serían los tratamientos MIN 1 y ORG 1, sin embargo a nivel de producción y rentabilidad para el productor baja. ABSTRACT Coffee growing has great importance worldwide (ICO, 2011), and in Ecuador, it has been one of the most important crops to generate income (COFENAC, 2011). However, in the productive systems of this country, the inappropriate use of fertilizers has been observed which produces loss of nutrients, thus it is important to study suitable doses for mineral and organic fertilizing. The purpose of the study was to evaluate the effect of mineral and organic fertilizing at different doses in a coffee monoculture in the province of Loja on soil characteristics, emission of the main gasses that produce the greenhouse effect and the phenology and productivity of crops. In the province of Loja (Ecuador) an area of 2.520 m2 was chosen, where 21 plots of Arabica coffee (Coffea arabica L.), the caturra variety were cultivated and three treatments with three repetitions each one for mineral and organic fertilization were used with doses that ranged from: mineral low (MIN 1= 157 Kg NPK ha-1 año-1 for the first year y 425 Kg NPK ha-1 año-1 for the second year), mineral medium (MIN 2= 325 Kg NPK ha-1 año-1 for the first year y 650 Kg NPK ha-1 año-1 I the second year) y mineral high (MIN 3= 487 y 875 Kg NPK ha-1 año-1 for the first and second year respectively), organic low (ORG 1= 147 Kg NPK ha-1 año-1 in the first year y 388 Kg NPK ha-1 año-1 in the second year), organics medium (ORG 2= 265 Kg NPK ha-1 año-1 for the first year y 541 Kg NPK ha-1 año-1 in the second year), organics high (ORG 3= 368 Kg NPK ha-1 año-1 for the first year and 727 Kg NPK ha-1 año-1 in the second year) y fertilization zero (TES = no fertilization).; urea, phosphoric rock and muriate of potash were used in the mineral fertilization and humus (Bioabor) in the organic, plus a blank treatment. Time to evaluate the applied fertilizers was for two consecutive years, fertilization was done twice per year based on soil analysis and nutritional requirements of the crops. In order to determine the characteristics of the soil, samples of soil in each plot with a depth of 20 cm were done; from these samples, the determined initial parameters were: color (Munsell), texture (hydrometer method), pH (soil-water 1:2,5 relation), organic matter (Walkey y Black), nitrogen (Micro Kjendahl), phosphorus (Bray y Kurtz), potassium (Olsen); these processes were repeated each six months in order to evaluate the changes that are produced due to mineral and organic fertilization in the crops. The emissions of greenhouse gasses from the soil to the atmosphere were determined by using enclosure method (Rondón, 2000) and the concentration, by using gas chromatography during the whole testing. The physiological measures (plant height, width of the top of the tree, thickness of the stem and production) were evaluated each two months, except for production which was annual at the end of each harvest. Moreover, the economic analysis of the productivity of the crops was done. The statistical analysis of the data was done using SPSS v. 17.0. The means were proved by ANOVAS with a factor of a Tukey test (P < 0,05). The economic benefit was estimated in terms of incomes and total expenses which were presented in the essay. The results obtained at the end of the essay show that the MIN 2 and MIN 3 treatments produced more meaningful changes in comparison with the other treatments used to improve soil fertility; pH was less affected in the acidification compared with the organic treatments which were greatly acidified; organic matter (MO) had increased considerably in these two treatments; however, they were surpassed by the organic treatments of fertilization; total nitrogen (Nt) and potassium (K) also presented better results at the end of the essay and phosphorus (P) showed good increasing figures although a little lower compared with ORG 2 and ORG 3 treatments. Regarding the emission of the greenhouse gasses, the fluxes accumulated from nitrous oxide (N2O) in two years increased in all the treatments in comparison with the blank treatment, but in a greater form and with higher fluxes in the MIN 3 and MIN 2 treatments which can be considered as the ones with greater contamination of N2O in the atmosphere, this can be due to the applied mineral doses to fertilize during the process; MIN 1 treatments and all the organic ones showed lower emission to the atmosphere. Methane emissions (CH4) did not show major differences in emissions in the treatments, being the greater emissions the ORG 3 and ORG 2 treatments; this is possibly due to the organic compost added to the soil; regarding carbon dioxide (CO2) emissions, in a similar way to CH4, the ORG 3 treatment was the one that presented greater emissions, the CO2 emissions to the atmosphere in the other treatments were lower and did not present meaningful differences among them. The physiological variables in all the cases helped coffee crops grow, this was observed when compared with the blank treatment; however, plants that reached the greatest height, width of top and diameter of stem were the plants of the MIN 3 treatment, followed by MIN 3, which did not show much significance among them, and for the organic treatments, the one that presented great results in these variables was ORG 3, which did not show meaningful differences compared with MIN 2, which proves that mineral fertilization is more effective in this case compared with the organic. In the first year of production, the mineral treatment with MIN 3 fertilization obtained greater production and thus did not show statistical difference with MIN 2 treatment, although the other treatments were greater. It is worth mentioning that MIN 1 treatment and ORG 3 treatment presented a meaningful production of coffee, not showing statistical differences among them. For the second year, the production of the crops showed greater profits than in the first year of evaluation in all the treatments, this was due to the physiological properties of the crops and on the other hand, it might be due to the addition of fertilizers during the whole essay; in a similar way, MIN 3 and MIN 2 performed better, not showing greater statistical differences among them, although the mineral treatment MEDIUM doses did not show statistical difference compared with ORG 3. The economic benefit was greater in the MIN 3 and MIN 2 treatments, although MIN 2 treatment is the one that shows the best cost-benefit ratios; ORG 2 and ORG 3 treatments and the blank produced negative benefits for the producer. Regarding the environment, the best treatments to care for the atmosphere are considered to be MIN 1 and ORG 1 treatments; however, regarding production volume and profitability they were low for the producer.

Ni lo uno, ni lo otro: posibilidad de lo neutro en arquitectura

Esta investigación se ocupa de comprobar la viabilidad de un término, un concepto que se detecta como posible instrumento para nombrar algunas operaciones en arquitectura. Ese concepto es Lo Neutro. Frente al sistema de dualidades con el que enunciamos lo real, lo Neutro se sitúa, no tanto en el punto medio, como en el punto opuesto a ambos términos. No es la conjunción de contrarios, sino aquello que desvía la propia pregunta que obliga a elegir. Próximo a los conceptos de indefinición, indiferencia e inacción, lo Neutro se revela como un mecanismo fundamental de disolución. Reconociendo en la lengua varios sentidos para el término, con cada capítulo, la tesis va construyendo una definición ampliada de lo Neutro hasta configurar un conjunto de significados aplicables a la arquitectura. El primero de ellos es el que se deriva del concepto de indiferencia funcional. Tras un análisis del contexto teórico sobre el que se asienta la dialéctica bi-direccional forma-función, su consolidación en los primeros años del siglo XX y también su puesta en crisis mediante la introducción de nociones multi-relacionales como ‘entorno’ y ‘sistema’, la investigación propone tres modelos de estudio: la Planta Tipo, la Planta Única y la Planta de Equivalencias. En cada uno de estos casos, aunque el tema fundamental es la neutralidad programática, se reconoce también la presencia de los mecanismos geométricos y operaciones conceptuales que lo Neutro utiliza para generar respectivamente condiciones de ‘soporte’, de ‘marco’ o de ‘campo’. Estas tres condiciones espaciales apuntan a un entendimiento de lo Neutro que asocia su fórmula de doble negación (ni lo uno, ni lo otro) con el estado más incipiente de la materia, aquel en el que todavía no es pero que contiene ya todos los elementos de posibilidad de ser: lo Neutro como potencia. Aquello que la lógica nos impide afirmar, que una cosa es y no-es al mismo tiempo, nos lo concede la categoría aristotélica de la potencia. Por ello, en la última parte de la tesis se desarrollan de forma más autónoma aquellos temas vinculados con estos tres tipos de espacio que se basan en la renuncia, abordando la cuestión de la potencialidad desde la negación. Partiendo de dos condiciones superficiales básicas, la del muro vertical y la del suelo horizontal, se analizan algunos discursos basados en una restricción radical a estos dos elementos. Así, el muro ciego encuentra su precedente artístico en el lienzo en blanco y la tabula rasa se pone en relación con el concepto de ‘terrain vague’. Por último, la posibilidad de toda potencia de no actualizarse lleva a explorar el no-hacer como renuncia voluntaria y su capacidad de transformarse en acto de resistencia. ABSTRACT The concern of this research is to test the feasibility of a term, a concept that has been detected as a potential tool to name some architectural operations. That concept is the Neutral. In front of the dualities system with which we enounce the real, the Neutral places itself, not so much in the midpoint as in the opposite point of both terms. It is not the conjunction of the contraries, but that which deflects the question itself that compels us to make a choice. Recognizing the multiple interpretations of the term in the common language, with each chapter, the thesis builds an expanded definition of the Neutral to configure a set of meanings applicable to architecture. The first of them is the one that derives from the concept of functional indifference. After an analysis of the theoretical context in which the two-way dialectic between form and function lies, its consolidation in the early twentieth century and its call into crisis by the introduction of multi-relational concepts such as 'environment' and 'system', the research suggests three study models: the Typical Plan, the Single Plan and the Equivalents Plan. In each of these cases, although the fundamental issue is programmatic neutrality, it also recognizes the presence of geometric mechanisms and conceptual operations that the Neutral uses to generate respectively 'support', 'frame' or 'field' conditions. These three spatial conditions point to an understanding of the Neutral which associates its double negation formula (neither one nor the other) with the most incipient state of matter, that in which it not yet is, but already contains every element of the possibility of being: the neutral as potentiality. That which logic does not allow us to affirm, that one thing is and is-not at the same time, it is granted by the Aristotelian category of potentiality. Therefore, in the last part of the thesis, the topics relating these three types of space which are based on renouncement are more autonomously developed, addressing the issue of potentiality from the standpoint of denial. Starting from two basic surface conditions, the vertical wall and the horizontal floor, some speeches based on a radical restriction on these two elements are analyzed. Thus, the blind wall finds its artistic precedent in the blank canvas and the tabula rasa attitude gets in relation to the concept of ‘terrain vague’. Finally, the possibility of any potency of not being updated leads to explore the not-doing as voluntary resignation and its ability to transform itself into an act of resistance.

Ni lo uno, ni lo otro: posibilidad de lo neutro en arquitectura

Esta investigación se ocupa de comprobar la viabilidad de un término, un concepto que se detecta como posible instrumento para nombrar algunas operaciones en arquitectura. Ese concepto es Lo Neutro. Frente al sistema de dualidades con el que enunciamos lo real, lo Neutro se sitúa, no tanto en el punto medio, como en el punto opuesto a ambos términos. No es la conjunción de contrarios, sino aquello que desvía la propia pregunta que obliga a elegir. Próximo a los conceptos de indefinición, indiferencia e inacción, lo Neutro se revela como un mecanismo fundamental de disolución. Reconociendo en la lengua varios sentidos para el término, con cada capítulo, la tesis va construyendo una definición ampliada de lo Neutro hasta configurar un conjunto de significados aplicables a la arquitectura. El primero de ellos es el que se deriva del concepto de indiferencia funcional. Tras un análisis del contexto teórico sobre el que se asienta la dialéctica bi-direccional forma-función, su consolidación en los primeros años del siglo XX y también su puesta en crisis mediante la introducción de nociones multi-relacionales como ‘entorno’ y ‘sistema’, la investigación propone tres modelos de estudio: la Planta Tipo, la Planta Única y la Planta de Equivalencias. En cada uno de estos casos, aunque el tema fundamental es la neutralidad programática, se reconoce también la presencia de los mecanismos geométricos y operaciones conceptuales que lo Neutro utiliza para generar respectivamente condiciones de ‘soporte’, de ‘marco’ o de ‘campo’. Estas tres condiciones espaciales apuntan a un entendimiento de lo Neutro que asocia su fórmula de doble negación (ni lo uno, ni lo otro) con el estado más incipiente de la materia, aquel en el que todavía no es pero que contiene ya todos los elementos de posibilidad de ser: lo Neutro como potencia. Aquello que la lógica nos impide afirmar, que una cosa es y no-es al mismo tiempo, nos lo concede la categoría aristotélica de la potencia. Por ello, en la última parte de la tesis se desarrollan de forma más autónoma aquellos temas vinculados con estos tres tipos de espacio que se basan en la renuncia, abordando la cuestión de la potencialidad desde la negación. Partiendo de dos condiciones superficiales básicas, la del muro vertical y la del suelo horizontal, se analizan algunos discursos basados en una restricción radical a estos dos elementos. Así, el muro ciego encuentra su precedente artístico en el lienzo en blanco y la tabula rasa se pone en relación con el concepto de ‘terrain vague’. Por último, la posibilidad de toda potencia de no actualizarse lleva a explorar el no-hacer como renuncia voluntaria y su capacidad de transformarse en acto de resistencia. ABSTRACT The concern of this research is to test the feasibility of a term, a concept that has been detected as a potential tool to name some architectural operations. That concept is the Neutral. In front of the dualities system with which we enounce the real, the Neutral places itself, not so much in the midpoint as in the opposite point of both terms. It is not the conjunction of the contraries, but that which deflects the question itself that compels us to make a choice. Recognizing the multiple interpretations of the term in the common language, with each chapter, the thesis builds an expanded definition of the Neutral to configure a set of meanings applicable to architecture. The first of them is the one that derives from the concept of functional indifference. After an analysis of the theoretical context in which the two-way dialectic between form and function lies, its consolidation in the early twentieth century and its call into crisis by the introduction of multi-relational concepts such as 'environment' and 'system', the research suggests three study models: the Typical Plan, the Single Plan and the Equivalents Plan. In each of these cases, although the fundamental issue is programmatic neutrality, it also recognizes the presence of geometric mechanisms and conceptual operations that the Neutral uses to generate respectively 'support', 'frame' or 'field' conditions. These three spatial conditions point to an understanding of the Neutral which associates its double negation formula (neither one nor the other) with the most incipient state of matter, that in which it not yet is, but already contains every element of the possibility of being: the neutral as potentiality. That which logic does not allow us to affirm, that one thing is and is-not at the same time, it is granted by the Aristotelian category of potentiality. Therefore, in the last part of the thesis, the topics relating these three types of space which are based on renouncement are more autonomously developed, addressing the issue of potentiality from the standpoint of denial. Starting from two basic surface conditions, the vertical wall and the horizontal floor, some speeches based on a radical restriction on these two elements are analyzed. Thus, the blind wall finds its artistic precedent in the blank canvas and the tabula rasa attitude gets in relation to the concept of ‘terrain vague’. Finally, the possibility of any potency of not being updated leads to explore the not-doing as voluntary resignation and its ability to transform itself into an act of resistance.

Estudio sobre la durabilidad de los nuevos tipos de cemento para la evaluación del comportamiento de morteros y hormigones frente a la agresión química de los sulfatos y del agua de mar

Esta investigación ha sido desarrollada para analizar la influencia de las características específicas de los nuevos cementos en el comportamiento expansivo originado durante cinco años por el ataque externo por sulfatos o agua de mar, y para estudiar la validez de diversos métodos de ensayo aplicables para evaluar la resistencia de los conglomerantes a los sulfatos o al agua de mar. Se han determinado las características químicas y mecánicas de los quince cementos seleccionados en el estudio (su contenido de yeso, tipo y cantidad de adiciones, contenidos de C3A y C4AF) para examinar la relación entre estos parámetros y su durabilidad frente al ataque por sulfatos. Se han llevado a cabo ensayos para evaluar la resistencia a sulfatos sobre probetas de mortero fabricadas con los quince cementos comunes seleccionados de muy distintos tipos, la mayoría de ellos resistentes a sulfatos conforme a la norma UNE-EN 197-1. Por cada tipo de cemento se fabricaron probetas de mortero para la realización de ensayos acelerados usando Na2SO4 como medio agresivo según la norma ASTM C 1012 manteniendo esas condiciones de exposición durante dos años. En paralelo se fabricaron otras series de probetas idénticas, que fueron conservadas en agua de mar y en agua saturada en cal (como patrón de un medio no agresivo) durante el mismo plazo. Adicionalmente estos cementos fueron evaluados conforme a los procedimientos de ensayo acelerado de la norma ASTM C 452 y del ensayo de Koch y Steinegger. También se fabricaron otras series de probetas de 40x40x160 mm (adoptando una relación a/c=0,5 y la composición arena:cemento definida en la norma UNE-EN 196-1). Durante cinco años de exposición en las tres condiciones de conservación establecidas (sulfatos, agua de mar y agua patrón) se han efectuado ensayos para determinar la resistencia a compresión y el deterioro superficial de las probetas de mortero. Ninguno de los conglomerantes fue mezclado inicialmente con yeso para acelerar el ataque ni se establecieron otras condiciones no realísticas en la fabricación de los morteros Se ha analizado el comportamiento durable de los cementos tanto frente al ataque por sulfatos como por agua de mar. Para la evaluación se han tomado en consideración las variaciones de contenido en C3A, los tipos y proporciones de los constituyentes (adiciones puzolánicas, escorias de horno alto, caliza …) con el mismo tipo de clínker en algunos casos. Se ha procedido a evaluar la validez de los límites de aceptación establecidos en cada uno de los ensayos acelerados para determinar la resistencia a sulfatos y valorar su idoneidad en los nuevos cementos, y se ha propuesto un método de ensayo acelerado recomendable para discriminar cementos resistentes y no resistentes a sulfatos. A la edad final de los tres tipos de exposición han sido correlacionados los parámetros relativos a la degradación superficial, pérdida de resistencia y expansión lineal de las probetas con las características de los cementos y los productos expansivos analizados mediante difracción de rayos X, con objeto de poder redefinir las características recomendables exigibles a los cementos resistentes a sulfatos o al agua de mar. Experimental research has been performed to relate specific cement characteristics to expansion due to sulfate or sea water attack during five years, and to study different test methods suitability for sulfate and marine resistance. Chemical and mechanical characteristics were studied to determine the variation in properties of selected cements (SO3 content, type and amount of additions, C3A, and C4AF content) and examine relationships between these characteristics and the results of sulfate resistance. Sulfate resistance testing have been performed on mortar specimens prepared from fifteen cement types of statistically diverse chemical composition, most of them with sulfate resistant properties according to European standard EN 197-1 Mortar specimens testing using Na2SO4 as the aggressive medium according to ASTM C 1012 was performed using each cement; identical specimens were also stored in sea water, and in lime saturated water (blank condition), up to two years age. Additionally these cements were tested conforming to ASTM C 452 and Koch and Steinegger test. Mortar specimens of 40x40x160 mm were also moulded (with w/c ratio and cement:sand composition of EN 196-1). Compressive strength of these mortar specimens have been tested during five years of immersion in a sulfate solution and also in seawater (and in lime saturated water, as a blank condition), and external damage and have been analyzed. None of the prepared mortars was blended with gypsum or any other nonrealistic condition. Durability behaviour in sulfate resistant common cements conforming to EN 197-1 exposed to sulfate attack was evaluated, and also the correlation between sulfate resistance and seawater resistance has been studied. Different C3A contents, variable types and proportioning of constituents (limestone, pozzolanic additions, blastfurnace slag ...) with or without the same clinker type were investigated. Recommended acceptance limits for sulfate resistance of cements concerning to each used test method were evaluated in order to explore their suitability. A new accelerated method has been recommended to provide a meaningful discrimination between sulfate resistant or non-sulfate resistant cements. Relationships between cement characteristics, degradation, expansive products obtained by X-ray diffraction techniques, strength loss and maximum expansion after applied storage treatments, were correlated at final age, to redefine cement characteristics for sulfate resistant and marine resistant Portland cement.

Acompañando e intensificando la información entrante en el explorar generativo

Los llamados procesos creativos en general, y los del proyectar arquitectónico en particular, mantienen aproximaciones hacia el objeto centradas principalmente en el procedimiento, es decir, en lo estratégico, lo metodológico o/y lo paradigmático. En ellas, además, el potencial de información no suele ser completo ni contemplado o, si lo ha sido, de manera inconciente, o referido de nuevo a lo procedimental. Igualmente, se centra el interés de estas aproximaciones, o en el objeto propuesto o resultado, o en lo procesal, pero sin atender a su constitución, es decir, a la información misma. Por tanto, y como reclama la física, la base constituyente informacional de estas aproximaciones, no ha sido considerada hasta ahora, ni se ha intentado sistematizar. Junto a esta omisión, estos acercamientos no permiten que cada humano configure de manera autónoma, independiente e íntegramente su propio proceso pues, los comentados procedimientos, están apoyados en marcos contextuales, culturales o/y procesales, reflejando así una orientación limitada en espacio-tiempo. Es así que se propone una potencia, o “aquellas cualidades poseídas por las cosas en cuya virtud éstas son totalmente impasibles o inmutables, o no se dejan cambiar fácilmente…”, según la define Aristóteles en “Metafísica”, como la posibilidad de, a la vez, aludir a un abanico informacional completo y apuntar hacia la íntegra elaboración de un proceso personal propio. Desde lo informacional, que a su vez es energético dependiendo de la disciplina científica considerada, se diferencian, en primer lugar, unos atributos o términos mínimos, que son unas potencias que compendian el abanico informacional completo. Es decir, son mínimos máximos. Estos atributos forman la fase cualitativa de la información a la que se llama acompañamiento. En segundo lugar, y apoyado tanto en el funcionamiento cerebral, en el espacio-tiempo cuántico, como en los nuevos experimentos e investigaciones de la biología, la física y la neurociencia en especial, se abren líneas nuevas para acceder a la información, antes contemplada de manera lineal, local y como entidad separada. Por ello, esta segunda aproximación presenta una potencia de intensificación de datos, que permite un aumento de los mismos en el cerebro y, por ello, la posibilidad de evitar el problema del “papel en blanco”. A esta fase se la nombra promoción. En tercer lugar, ambas fases constituyen la generación como propuesta de tesis, siendo la misma un cambio de cualquier tipo en el que alguien es agente de algo, específicamente, cuando un humano es mediador entre sucesos. Fusionando ambas, se añade simultáneamente una con-formación potencial global, que es sinérgicamente más que la suma de las dos anteriores. De esta manera agrupadora, y con objeto de materializar y sistematizar ahora esta generación o potencia, se presenta una puesta en práctica. Para ello, se desarrolla un modelo analítico-geométrico-paramétrico y se expone su aplicación en dicho caso práctico. Además, dicho modelo presenta un funcionamiento autorreferido u holográfico, reflejando tanto a los estudios científicos revisados, como al propio funcionamiento de los atributos o/y de todas las potencias que se presentan en esta investigación. ABSTRACT Generally speaking the so-called creative processes, and particularly those of the architectural design, keep approaches into the object oriented mainly in the process, so to speak, into the strategical, the methodological and/ or into the paradigmatic. In addition, they don’t usually take into account the potential of information neither in a complete manner nor even contemplated or, if considered, worked out unconsciously, or referred back to the procedural. Similarly, the interest of these approaches is focused either in the proposed object or the output, or in the processual, but leaving their constituent out, being it the information itself. Therefore, as physics is claiming nowadays, the constituent core of these approaches have neither been taken into account so far, nor tried to systematize. Along with this omission, these approaches do not allow each human being to set up autonomously, independently and entirely her/ his own process, because the mentioned procedures are supported by contextual, cultural and/ or procedural frameworks, reflecting then a perspective limited in space-time. Thus a potency is proposed, or "those qualities possessed by things under which they are totally impassive or immutable, or are not easily changed...", as defined by Aristotle in "Metaphysics", as the possibility to, and at the same time, alluding to a full informational range and point out to a whole development of an own personal process. From the informational stand, which in turn is energetic depending on the scientific discipline considered, it is distinguished, in the first place, a minimum set of attributes or terms, which are potencies that summarize the full informational range. That is, they are maximum minimums. These attributes build up the qualitative phase of the information being called accompaniment. Secondly, and supported in the brain functioning, in quantum space-time, as in new experiments and research carried out by biology, physics and neuroscience especially, new lines to access information are being opened, being contemplated linearly, locally and as a detached entity before. Thus, this second approach comes up with a potency of data`s intensifying that allows an increase in the brain thereof and, therefore, the possibility of avoiding the problem of "the blank paper". Promotion is how this phase is appointed. In the third place, both phases form the generation as the dissertation proposal, being it a change of any kind in which someone is the agent of something, specifically, when a human being is the mediator in between events. Fusing both of them, a global potential formation-with is added simultaneously, which is synergistically greater than the sum of the previous two. In this grouping way, and now in order to materialize and systemize this generation or potency, an implementation is displayed. To this end, an analytical-geometrical-parametrical model is developed and put into practice as a case study. In addition, this model features a self-referral or holographic functioning, being aligned to both scientific reviewed studies, and the very functioning either of the attributes and/ or all the potencies that are introduced in this research.

The phosphoprotein DARPP-32 mediates cAMP-dependent potentiation of striatal N-methyl-d-aspartate responses

The signal transduction pathway underlying the cAMP-dependent modulation of rat striatal N-methyl-d-aspartate (NMDA) responses was investigated by using the two-electrode voltage-clamp technique. In oocytes injected with rat striatal poly(A)+ mRNA, activation of cAMP-dependent protein kinase (PKA) by forskolin potentiated NMDA responses. Inhibition of protein phosphatase 1 (PP1) and/or protein phosphatase 2A (PP2A) by the specific inhibitor calyculin A occluded the PKA-mediated potentiation of striatal NMDA responses, suggesting that the PKA effect was mediated by inhibition of a protein phosphatase. Coinjection of oocytes with striatal mRNA and antisense oligodeoxynucleotides directed against the protein phosphatase inhibitor DARPP-32 dramatically reduced the PKA enhancement of NMDA responses. NMDA responses recorded from oocytes injected with rat hippocampal poly(A)+ mRNA were not affected by stimulation of PKA. When oocytes were coinjected with rat hippocampal poly(A)+ mRNA plus complementary RNA coding for DARPP-32, NMDA responses were potentiated after stimulation of PKA. The results provide evidence that DARPP-32, which is enriched in the striatum, may participate in the signaling between the two major afferent striatal pathways, the glutamatergic and the dopaminergic projections, by the cAMP-dependent regulation of striatal NMDA currents.

Lack of the DNA repair protein O6-methylguanine-DNA methyltransferase in histologically normal brain adjacent to primary human brain tumors.

Exposure to exogenous alkylating agents, particularly N-nitroso compounds, has been associated with increased incidence of primary human brain tumors, while intrinsic risk factors are currently unknown. The DNA repair protein O6-methylguanine-DNA methyltransferase (MGMT) is a major defense against the carcinogenicity of N-nitroso compounds and other alkylators. We report here that in 55% (64/117) of cases, histologically normal brain tissue adjacent to primary human brain tumors lacked detectable MGMT activity [methyl excision repair-defective (Mer-) status]. The incidence of Mer- status in normal brain tissue from brain tumor patients was age-dependent, increasing from 21% in children 0.25-19 years of age to 75% in adults over 50. In contrast, Mer- status was found in 12% (5/43) of normal brain specimens from patients operated for conditions other than primary brain tumors and was not age-dependent. The 4.6-fold elevation in incidence of Mer- status in brain tumor patients is highly significant (chi2 = 24; p < or = 0.001). MGMT activity was independent of age in the lymphocytes of brain tumor patients and was present in lymphocytes from six of nine tumor patients whose normal brain specimen was Mer-. DNA polymerase beta, apurinic/apyrimidinic endonuclease, and lactate dehydrogenase activities were present in all specimens tested, including Mer- specimens from brain tumor patients. Our data are consistent with a model of carcinogenesis in human brain in which epigenetically regulated lack of MGMT is a predisposing factor and alkylation-related mutagenesis is a driving force.

HLA-Cw allele analysis by PCR-restriction fragment length polymorphism: study of known and additional alleles.

We describe a technique for HLA-Cw genotyping by digestion of PCR-amplified genes with restriction endonucleases. Locus-specific primers selectively amplified HLA-Cw sequences from exon 2 in a single PCR that avoided coamplification of other classical and nonclassical class I genes. Amplified DNAs were digested with selected enzymes. Sixty-three homozygous cell lines from International Histocompatibility Workshop X and 113 unrelated individual cells were genotypes for HLA-Cw and compared with serology. The present protocol can distinguish 23 alleles corresponding to the known HLA-Cw sequences. Genotyping of serologically undetectable alleles (HLA-Cw Blank) and of heterozygous cells was made possible by using this method. Six additional HLA-Cw alleles were identified by unusual restriction patterns and confirmed by sequencing; this observation suggests the presence of another family of allele-sharing clusters in the HLA-B locus. This PCR-restriction endonuclease method provides a simple and convenient approach for HLA-Cw DNA typing, allowing the definition of serologically undetectable alleles, and will contribute to the evaluation of the biological role of the HLA-C locus.

Avaliação do potencial de utilização de espécies leguminosas, arbóreas e arbustivas, noduladas e micorrizadas, na revegetação de barragem de rejeitos da Companhia Mineira de Metais, Vazante, MG

O processo de beneficiamento do zinco, extraído em Vazante pela Companhia Mineira de Metais - CMM produz um rejeito alcalino e com baixa disponibilidade de nutrientes. Esta dissertação tem como objetivo avaliar o potencial de utilização de espécies leguminosas noduladas e micorrizadas na revegetação de barragem de rejeito da CMM. Neste sentido, foram instalados dois experimentos de campo onde foi realizado o plantio prévio de Brachiaria sp. O primeiro experimento foi composto por 36 tratamentos que foram formados por uma combinação de 17 espécies + 1 testemunha (ausência de plantas) na presença e na ausência de esterco de curral (2,0 L) na cova de plantio. Cada unidade experimental foi formada por 20 exemplares da mesma espécie que foram plantadas em covas abertas manualmente (25 x 25 x 25 cm) num espaçamento de 2 x 2 m. Todas as covas receberam a adubação básica formada por 125 g de superfosfato simples e 60 g de cloreto de potássio. Entre as 17 espécies avaliadas, 3 não pertencem a família Leguminosae e receberam, além da adubação básica, cerca de 25 g de sulfato de amônio por cobertura. O segundo experimento foi montado com o objetivo de avaliar o potencial de espécies leguminosas beneficiarem o estabelecimento e crescimento de espécies não leguminosas na revegetação de barragem de rejeito da CMM. Foram utilizadas três espécies leguminosas (Enterolobium scomburkii, Acacia mangium e Acacia holosericea) e três não leguminosas (Lithraea brasiliensis, Cinnamomum glaziovii e Eugenia jambolana) num esquema fatorial (3 x 3) + 1 testemunha, formando dez tratamentos distribuídos em blocos ao acaso com três repetições. Cada parcela foi formada por 20 plantas (10 leguminosas + 10 não leguminosas) plantadas em espaçamento 2 x 2 m e com a mesma adubação básica utilizada no primeiro experimento. Todas as espécies leguminosas utilizadas foram previamente inoculadas com estirpes selecionadas de bactérias fixadoras de Nitrogênio atmosférico e com uma mistura de fungos micorrízicos provenientes da Embrapa/Agrobiologia. Os experimentos foram avaliados quanto ao estabelecimento e crescimento de plantas (altura e diâmetro do colo) aos 4, 12 e 24 meses após o plantio. Os resultados obtidos permitem concluir que dentre as espécies avaliadas, as mais indicadas para a primeira etapa da revegetação da barragem de rejeito da CMM são: Acacia holosericea, Acacia farnesiana, Acacia auriculiformis, Mimosa caesalpiniifolia, Leucaena leucocephala, Mimosa birmucronata, Enterolobium schomburkii e Prosopis juliflora. O sucesso do consórcio de espécies leguminosas e não leguminosas depende da escolha das espécies a serem combinadas, de maneira que não exista uma efetiva competição por água, nutrientes e luz que possa prejudicar as espécies de menor plasticidade. Das combinações avaliadas, as de maiores potencialidades para o programa de revegetação das barragens de rejeito da CMM são aquelas envolvendo a espécieLithraea brasiliensis.

Estudo da remediação de um aquífero contaminado com sulfato e metais através de barreira reativa permeável orgânica.

Este trabalho teve como objetivo geral estudar a viabilidade técnica de utilizar bagaço de cana como meio reativo de barreiras reativas permeáveis (BRP) para remoção de sulfato e metais de águas subterrâneas contaminadas. O estudo baseou-se em investigação experimental, por meio de ensaios laboratoriais de coluna, e em modelagem matemática, para a qual utilizaram-se também alguns dados obtidos em um estudo de caso de uma unidade industrial contaminada com sulfato e metais. Neste local contaminado, as características hidrogeológicas e topográficas propiciam a utilização de uma barreira reativa permeável como técnica de remediação. Barreiras reativas permeáveis são uma alternativa para remediação de águas subterrâneas que vem progredindo rapidamente na última década, a partir de ensaios de bancada e coluna em laboratório para implementação em escala real em campo. Três colunas bióticas foram montadas utilizando bagaço de cana como meio reativo e um material de base poroso constituído de areia e cascalho para fornecer adequada condutividade hidráulica, com a proporção de 1:28 em massa seca. Também foi adicionado ao meio reativo um inóculo bacteriano composto por esterco bovino dissolvido. Uma quarta coluna, sem inóculo e contendo um agente biocida, compôs o experimento branco (abiótico). Uma solução sintética foi introduzida nas colunas simulando condições da água subterrânea do estudo de caso, com velocidade de Darcy em torno de 2,0x10-7 m/s composta por sulfato e metais (zinco e níquel) com concentrações de 6.000 mg/L e 15 mg/L, respectivamente. Os resultados das análises da fase líquida das colunas bióticas apresentaram: (i) média da taxa de remoção de sulfato durante todo o tempo do experimento de 49 mg/L/dia; (ii) as concentrações de Zn e Ni diminuíram de 15 mg/L para valores não detectáveis pela técnica analítica utilizada (< 0,01 mg/L); (iii) aumento do pH de 5.5-5.8 para valores entre 6,8-8,0; (iv) redução do valor do potencial de óxido redução (Eh) para valores de até -200mV. Não foram observadas reduções das concentrações de metais e sulfato na fase líquida da coluna abiótica e os valores de pH e Eh permaneceram dentro das faixas iniciais. Análises nas fases sólidas das colunas bióticas por MEV e EDS após o término do experimento identificaram a presença de Ni, Zn, S e Mn, indicando a precipitação desses metais em forma de sulfetos. Estes elementos não foram detectados na fase sólida da coluna abiótica. Assim, pôde-se inferir que toda a remoção de sulfato verificada nas colunas bióticas pode ser atribuída a redução bacteriana de sulfato. A partir das condições experimentais dos ensaios, foi realizada a modelagem e o dimensionamento da BRP. Para a estimativa da cinética de redução de sulfato, aplicou-se a solução analítica de Van Genuchten para transporte de contaminantes com degradação, obtendo-se uma taxa de decaimento de primeira ordem de 0,01 dia-1. A determinação da espessura e tempo de residência da barreira foi realizada considerando que a concentração de sulfato na saída da barreira fosse menor ou igual a 250 mg/L. O resultado do dimensionamento de uma BRP preenchida com bagaço de cana e areia nas proporções de 1:28 em massa seca resultaria em uma BRP de 7,1 m de espessura, com tempo de residência de 950 dias, no local de estudo de caso. Caso fosse utilizado o dobro da proporção de bagaço de cana e areia em massa seca (1:14), a implantação da BRP apresentar-se-ia viável, com espessura aproximada de 4 m. Através destes resultados, pôde ser comprovada a hipótese de que bagaço de cana como substrato e esterco bovino como inóculo compõem um meio reativo viável para a redução de sulfato e precipitação de metais em uma BRP.

Novel silica membrane material for molecular sieve applications

Development of new silica membranes properties, e.g., molecular sieving properties, has been increasingly gaining importance in the last few years. A novel unsupported silica membrane, referred to as hydrophobic metal-doped silica, was developed by cobalt-doping within the organic templated silica matrix. The novel material was prepared by the acid-catalyzed hydrolysis and condensation process of tetraethylorthosilicate (TEOS) and methyltriethoxysilane (MTES), which is the precursor for methyl ligand covalently bounded to the silica matrix. The synthesis and surface properties of the novel unsupported silica membrane as well as the unsupported blank silica and modified silica membranes were revealed by surface and microstructural techniques, such as water contact angle measurement, FTIR, X-ray, Solid-state 29Si MAS NMR, TGA and N2 and CO2 adsorption measurements. The results showed that the thermal stability of the organic templated silica matrix was enhanced by cobalt-doping process. A hydrophobic microporous silica membrane material with high thermal stability up to ∼560 °C in oxidizing atmosphere and a narrow pore size distribution centered at 1.1 nm was obtained. Therefore, a novel precursor material for molecular sieve silica membranes applications has been achieved and developed.

Disposable electrochromic polyaniline sensor based on a redox response using a conventional camera: A first approach to handheld analysis

We present a disposable optical sensor for Ascorbic Acid (AA). It uses a polyaniline based electrochromic sensing film that undergoes a color change when exposed to solutions of ascorbic acid at pH 3.0. The color is monitored by a conventional digital camera working with the hue (H) color coordinate. The electrochromic film was deposited on an Indium Tin Oxide (ITO) electrode by cyclic voltammetry and then characterized by atomic force microscopy, electrochemical and spectroscopic techniques. An estimation of the initial rate of H, as ΔH/Δt, is used as the analytical parameter and resulted in the following logarithmic relationship: ΔH/Δt = 0.029 log[AA] + 0.14, with a limit of detection of 17 μM. The relative standard deviation when using the same membrane 5 times was 7.4% for the blank, and 2.6% (for n = 3) on exposure to ascorbic acid in 160 μM concentration. The sensor is disposable and its applicability to pharmaceutical analysis was demonstrated. This configuration can be extended for future handheld configurations.