Cr3+ and Cr4+ luminescence in glass ceramic silica

This paper reports on the effect of glass ceramic silica matrix on [CrO4](4-) and Cr2O3 NIR and visible luminescence. Chromium-containing silica was obtained by precipitation from water-glass and chromium nitrate acid solution with thermal treatment at 1000 degrees C. From XRD results silica and silica-chromium samples are crystalline. The chromium emission spectrum presents two main broad bands: one in the NIR region (1.1-1.7 mu m) and other in the visible region (0.6-0.7 mu m) assigned to Cr4+ and to Cr3+, respectively. This thermal treated glass ceramic silica-chromium sample stabilizes the [CrO4](4-) where Cr4+ substitutes for Si4+ and also hexacoordinated Cr3+ group probably as segregated phase in the system. It can be pointed out that luminescence spectroscopy is a powerful toot for detecting the two chromium optical centers in the glass ceramic silica. (C) 2008 Elsevier B.V. All rights reserved.

Structural role of fluoride in the ion-conducting glass system B(2)O(3)-PbO-LiF studied by single- and double-resonance NMR

The local structure of an ion-conducting glass with nominal composition 50B(2)O(3)-10PbO-40LiF has been investigated by complementary (7)Li, (11)B, (19)F, and (207)Pb single- and double-resonance experiments. The results give insight into the structural role of the lithium fluoride additive in borate glasses: (1) LiF is seen to actively participate in the network transformation process contributing to the conversion of three- into four-coordinate boron units, as shown by (11)B single-resonance as well as by (11)B{(19)F} and (19)F{(11)B} double-resonance experiments. (2) (19)F signal quantification experiments suggest substantial fluoride loss, presumably caused by formation of volatile BF(3). A part of the fluoride remains in the dopant role, possibly in the form of small LiF-like cluster domains, which serve as a mobile ion supply. (3) The extent of lithium-fluorine and lead-fluorine interactions has been characterized by (7)Li{(19)F} and (207)Pb{(19)F} REDOR and SEDOR experiments. On the basis of these results, a quantitative structural description of this system has been developed.

Glass-to-Vitroceramic Transition in the Yttrium Aluminoborate System: Structural Studies by Solid-State NMR

The crystallization of laser glasses in the system (B(2)O(3))(0.6){(Al(2)O(3))(0.4-y)(Y(2)O(3))(y)} (0.1 <= y <= 0.25) doped with different levels of ytterbium oxide has been investigated by X-ray powder diffraction, differential thermal analysis, and various solid-state NMR techniques. The homogeneous glasses undergo major phase segregation processes resulting in crystalline YBO(3), crystalline YAI(3)(BO(3))(4), and residual glassy B(2)O(3) as the major products. This process can be analyzed in a quantitative fashion by solid-state (11)B, (27)Al, and (89)Y NMR spectroscopies as well as (11)B{(27)Al} rotational echo double resonance (REDOR) experiments. The Yb dopants end up in both of the crystalline components, producing increased line widths of the corresponding (11)B, (27)Al, and (89)Y NMR resonances that depend linearly on the Yb/Y substitution ratio. A preliminary analysis of the composition dependence suggests that the Yb(3+) dopant is not perfectly equipartitioned between both crystalline phases, suggesting a moderate preference of Yb to substitute in the crystalline YBO(3) component.

Unraveling the Role of Sulfur Compounds in Acid Rain Formation: Experiments on a Wetted Glass pH Electrode

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

The shoving model for the glass-former LiCl center dot 6H(2)O: A molecular dynamics simulation study

Molecular dynamics (MD) simulations of LiCl center dot 6H(2)O Showed that the diffusion coefficient D, and also I lie structural relaxation time , follow a power law at high temperatures, D(-1) proportional to (T - T(0))(-mu), with the same experimental parameters for viscosity (T(0) = 207 K, mu = 2.08). Decoupling between D and occurs at T(x) similar to 1.1 T(0). High frequency acoustic excitations for the LiCl center dot 6H(2)O model were obtained by the calculation of time correlation functions of mass current fluctuations. The temperature dependence of the instantaneous shear modulus, G,(T), was considered in the shoving model for supercooled liquids [J.C. Dyre, T. Christensen, N.B. Olsen, J. Non-Cryst. Solids 352 (2006) 4635] resulting in a linear relationship log (D(-1)) vs. G root T. (C) 2009 Elsevier B.V. All rights reserved.

Prigogine-Defay Ratio for an Ionic Glass-Former: Molecular Dynamics Simulations

The pressure dependence of the glass-transition temperature, T(g)(P), of the ionic glass-former 2Ca(NO(3))(2) center dot 3KNO(3), CKN, has been obtained by molecular dynamics (MD) simulations The liquid-glass difference of thermal expansivity, Delta alpha, heat capacity, Delta C(p), and isothermal compressibility, Delta kappa, have been calculated as a function of pressure. It has been found that the Ehrenfest relation dT(g)/dP = TV Delta alpha/Delta C(p) predicts the pressure dependence of T, but the other Ehrenfest relation, dT(g)/dP = Delta kappa/Delta alpha, does not. Consequently, the Prigogine-Defay ratio, Pi = Delta C(p)Delta kappa/TV Delta alpha(2), is Pi similar to 1.2 at low pressures, but increases 1 order of magnitude at high pressures. The pressure dependence of the Prigogine-Defay ratio is interpreted in light of recent explanations for the finding Pi > 1.

A rapid and reliable bonding process for microchip electrophoresis fabricated in glass substrates

In this report, we describe a rapid and reliable process to bond channels fabricated in glass substrates. Glass channels were fabricated by photolithography and wet chemical etching. The resulting channels were bonded against another glass plate containing a 50-mu m thick PDMS layer. This same PDMS layer was also used to provide the electrical insulation of planar electrodes to carry out capacitively coupled contactless conductivity detection. The analytical performance of the proposed device was shown by using both LIF and capacitively coupled contactless conductivity detection systems. Efficiency around 47 000 plates/m was achieved with good chip-to-chip repeatability and satisfactory long-term stability of EOF. The RSD for the EOF measured in three different devices was ca. 7%. For a chip-to-chip comparison, the RSD values for migration time, electrophoretic current and peak area were below 10%. With the proposed approach, a single chip can be fabricated in less than 30 min including patterning, etching and sealing steps. This fabrication process is faster and easier than the thermal bonding process. Besides, the proposed method does not require high temperatures and provides excellent day-to-day and device-to-device repeatability.

Comparison of the analytical performance of electrophoresis microchannels fabricated in PDMS, glass, and polyester-toner

This paper compares the analytical performance of microchannels fabricated in PDMS, glass, and polyester-toner for electrophoretic separations. Glass and PDMS chips were fabricated using well-established photolithographic and replica-molding procedures, respectively. PDMS channels were sealed against three different types of materials: native PDMS, plasma-oxidized PDMS, and glass. Polyester-toner chips were micromachined by a direct-printing process using an office laser printer. All microchannels were fabricated with similar dimensions according to the limitations of the direct-printing process (width/depth 150 mu m/12 mu m). LIF was employed for detection to rule out any losses in separation efficiency due to the detector configuration. Two fluorescent dyes, coumarin and fluorescein, were used as model analytes. Devices were evaluated for the following parameters related to electrophoretic separations: EOF, heat dissipation, injection reproducibility, separation efficiency, and adsorption to channel wall.

"I'm still here. Sort of." : Constructed Identities in Paul Auster's City of Glass

Paul Auster’s City of Glass contains a jumble of identities. In fact, the identities are more numerous than the characters, and consequently, characters have several different identities. Some of these identities are obvious constructs, but with others the degree of construction is less evident. Poststructuralist theory, however, puts forward the idea that these seemingly original identities are in fact constructs to the same level as all others. Thus, this essay argues that there are no original identities; identities are constructed by outer factors. This essay discusses three outer factors contributing to the construction of identities, factors commonly discussed in poststructuralist criticism, these three being language, cultural codes and chance.

Accelerated aging of thick glass second surface silvered reflectors under sandstorm conditions

Concentrated solar power systems are expected to be sited in desert locations where the direct normal irradiation is above 1800 kWh/m2.year. These systems include large solar collector assemblies, which account for a significant share of the investment cost. Solarreflectors are the main components of these solar collector assemblies and dust/sand storms may affect their reflectance properties, either by soiling or by surface abrasion. While soiling can be reverted by cleaning, surface abrasion is a non reversible degradation.The aim of this project was to study the accelerated aging of second surface silvered thickglass solar reflectors under simulated sandstorm conditions and develop a multi-parametric model which relates the specular reflectance loss to dust/sand storm parameters: wind velocity, dust concentration and time of exposure. This project focused on the degradation caused by surface abrasion.Sandstorm conditions were simulated in a prototype environmental test chamber. Material samples (6cm x 6cm) were exposed to Arizona coarse test dust. The dust stream impactedthese material samples at a perpendicular angle. Both wind velocity and dust concentrationwere maintained at a stable level for each accelerated aging test. The total exposure time in the test chamber was limited to 1 hour. Each accelerated aging test was interrupted every 4 minutes to measure the specular reflectance of the material sample after cleaning.The accelerated aging test campaign had to be aborted prematurely due to a contamination of the dust concentration sensor. A robust multi-parametric degradation model could thus not be derived. The experimental data showed that the specular reflectance loss decreasedeither linearly or exponentially with exposure time, so that a degradation rate could be defined as a single modeling parameter. A correlation should be derived to relate this degradation rate to control parameters such as wind velocity and dust/sand concentration.The sandstorm chamber design would have to be updated before performing further accelerated aging test campaigns. The design upgrade should improve both the reliability of the test equipment and the repeatability of accelerated aging tests. An outdoor exposure test campaign should be launched in deserts to learn more about the intensity, frequencyand duration of dust/sand storms. This campaign would also serve to correlate the results of outdoor exposure tests with accelerated exposure tests in order to develop a robust service lifetime prediction model for different types of solar reflector materials.

Equal Couples in Equal Houses : Cultural perspectives on Swedish solar and bio-pellet heating design

Knowing how to design a heating system that will work mechanically is quite different from knowling how to design a system that users perceive as responsive to their domestic practices and values. In this chapter, social anthropologist Henning argues that the challenge for designers involved in the development or marketing of green buildings with heating systems that are based on renewable sources of energy is to see things from the perspective of those who are supposed to live in these buildings. The chapter focuses on three culture-specific aspects of Swedish households and single-family houses: perceptions of house and home, of private and public space, and of male and female space. Through these three angles, some clues are given as to how design, performance and location of solar and bio-pellet heating systems could be made to resonate with predominant experiences, habits and ways of thinking among both men and women.

In Bio-Fuel We Trust

In bio-fuel we trust. Or do we? In this chapter, ethnographic material from Sweden is used to discuss ways sin which trust may influence the choice of bio-fuel for heating purposes. The meaning and substance of trust or distrust, as well as the very conditions for trust, are elaborated on in relation to solar and bio-pellet systems, district heating with bio-fuel, and traditional fireplaces. An important conclusion of this chapter is that the degree to which people perceive others as being like themselves or not tends to be decisive for whether these others are to be trusted, and therefore worth listening to. The context and situation in which a certain heating system is being chosen does not only involve trust in individuals, however, but in companies and the authorities, as well as in the arterfacts themselves. An example is given on how distrust of district heating companies led house owners to reject an offer of district heating despite the comfort and environmental benefit this could have provided. it is shown how this distrust might be resolved by making the rhythm of households and sitrict heating companies more in step with one another. The strong emotional attachment to and deep-felt trust in the traditional fireplace is also analysed, and a question is put forward as to whether these feelings could be transferred to modern bio-pellet stoves. Finally, our great and assured trust in bio-fuel as a main solution to global climate change is shortly commented upon and partly questioned.

Kombinerade bio- och solvärmesystem : Handbok för systemutformning

Syftet med denna skrift är att sammanställa den kunskap som finns beträffande kombinerade pellet- och solvärmesystem för att på så sätt stödja företagen i deras systemutveckling. Denna skrift behandlar erfarenheter som gjorts inom forskning på sol och pellet och omsätter dessa i praktiska råd för systemutformning. Förslag ges på systemutformning, olika tekniska lösningar samt hur systemen bör styras.När solvärme och pellet skall kombineras finns det många möjligheter att koppla ihop systemen. Det finns olika traditioner i olika länder, vilket gör att systemlösningarna varierar från land till land. En generell slutsats är dock att konventionella svenska pannor med inbyggd varmvattenberedning inte är lämpliga i konventionella solvärmesystem. Det ger komplicerade systemlösningar och det är svårt att åstadkomma bra skiktning i tanken.I ett solvärmesystem är det viktigt att tanken kan laddas ur på ett sådant sätt att kraftig skiktning erhålls. Det betyder att tankens botten skall kylas ner till temperaturen på ingående kallvatten och att tankens mellersta del skall kylas till samma temperatur som radiatorreturen. Om solfångaren även vintertid kan arbeta med att förvärma kallvatten av 10 till 20ºC fås en betydligt bättre verkningsgrad på solfångaren än om radiator returen skall förvärmas, som i bästa fall ligger på en temperaturnivå på mellan 30 och 40ºC. Av denna anledning skall radiator returen placeras en bra bit upp från botten i ackumulatortanken och tappvattnet skall förvärmas i en slinga som börjar i tankens botten. Om det finns ett VVC-system måste systemet anslutas på ett speciellt sätt så att inte tankens skiktning störs.En annan viktig parameter i tankens utformning är att värmeförlusterna hålls låga, detta är viktigt för att klara tappvattenlasten mulna perioder och för att hålla energianvändningen låg. I moderna hus där tanken placeras i boutrymmet blir det också en komfortfråga för att undvika över-temperaturer i rummet där tanken placeras. För att få en bra isolering måste man se till att det finns ett lufttätt skikt över hela isoleringen som dessutom sluter tätt mot röranslutningar. Ofrivillig själv-cirkulation i anslutande kretsar som kan kyla av och blanda om ackumulatortanken skall förhindras med backventiler.Vid design av solfångarkretsen måste överhettning och stagnation kunna klaras utan glykolnedbrytning eller andra skador. Partiell förångning innebär att man låter solfångaren koka på ett kontrollerat sätt så att endast ånga blir kvar i solfångaren. Vätska samlas i ett större expansionskärl och systemet återfylls när vätskan kondenserar. Dränerande system med enbart vatten är också en möjlighet, men kräver större noggrannhet vid installationen så att sönderfrysning undviks.Pelletkaminer (luftburna) ger god komfort och lågt elbehov i direktelvärmda hus med öppen planlösning, dvs. om värmen från kaminen kan spridas till alla rum utan att behöva passera genom mer än en dörröppning. Även i lågenergihus kan den luftburna kaminen vara lämplig. I hus med mer sluten planlösning krävs en vattenmantlad kamin med hög andel värme till vattenkretsen och ett vattenburet värmesystem. Det är viktigt att sådana system utformas korrekt för att komforten skall bli hög och elanvändningen låg. Brukarens aspekter och komfortkrav måste beaktas vid användning av kaminer, eftersom det krävs en temperaturskillnad mellan olika rum för att få värmespridning från det rum där kaminen är placerad.

Underlag för utökad besiktning av bio- och solvärmesystem : Formulär med analyshjälp

Det är svårt att på ett genomarbetat sätt, kontrollera en solvärmeanläggning som är i drift och det blir svårare när solvärmesystemet skall samverka med en biobränsleanläggning, som har sina speciella egenheter. Det enklaste och, som det kan tyckas, bästa sättet att kontrollera om en solvärmeanläggning fungerar, är att beräkna utifrån en värmemängdsmätare, som förhoppningsvis finns i anläggningen, hur mycket energi per m2 aktiv area som solfångaren har producerat per år. Om produktionen ligger mellan 300 – 350 kWh/m2 så är det bra. Det är dock så att en solvärmeanläggning borde kunna producera betydligt mer värme om den bara ges lite bättre förutsättning eller att den faktiskt kan ge mindre, men ändå uppfylla de krav som ställdes. Det behöver inte nödvändigtvis vara antalet producerade solfångar-kWh värme som är högt utan det viktigaste kanske är att antalet inbesparade kWh biobränsle är många. För att kunna få ett grepp om hur en solvärmeanläggning fungerar i sitt sammanhang så bör det totala systemet redovisas framför allt med avseende på: -Värmedistributionssystemets uppbyggnad. Var och när finns kallt vatten som ska värmas samt hur mycket.-Energi- och effektnivåer för olika delar av systemet och fram för allt under sommaren-Vilka pannor och bränslen som används, framför allt med betoning på reglerbarhetSolvärmekretsen, som inte är speciellt annorlunda utformad än i andra lite större solvärmeanläggningar ges i den här rapporten relativt stort utrymme, eftersom den samlade kompetensen bland de som gör besiktningar och kontroller inte är så hög. De delar som berörs mest är:-Trycket i solvärmeanläggningen med avseende på expansionskärlets förtryck, systemets uppfyllnadstryck och driftsfunktioner-Flödet i anläggningen som inriktar sig på luftmedryckning, flödesfördelning och vanliga flödeshastigheter-Solfångarnas energi- och värmeeffektproduktionHuvuddelen av underlagsmaterialet bör ha samlats in före besöket, genom att försöka få tag på:-Förstudier för solvärme- och pannanläggning-Förfrågningsunderlag för i första hand solvärmeanläggningen-Driftstatistik-Data på hur det totala systemet ser ut.Dessa data bör bearbetas innan besöket på plats vilket skall inkludera en genomgång av driftsansvarig vilket kompletteras med en guidad tur genom anläggningen. Besöket bör också vara förberett hos driftsansvariga så att stegar för att komma åt solfångarna finns framtagna och de säkerhetsselar som skall finnas vid okulär inspektion finns tillgängliga. Efter avslutad på platsen kontroll ska en besiktningsrapport skrivas. Mycket underlagsberäkningar ska skickas med som bilaga samt en lista med punkter som syftar till att få en effektivare sol- och biobränsleanläggning.

För Sverige i framtiden : Bio-objektifiering av ny medicinsk teknologi

Taking Sweden into the future – Bio-objectification of new medical technology In this article, we analyze how contemporary discursive silences around new biotechnologies such as cybrids and induced pluripotent stem cells (iPSC), have been enabled by earlier policy processes in the area, e.g. boundary work around what is human and non-human, living and non-living, subject and object. The analysis of policy processes around xenotransplantations and the use of human embryonic stem cells, shows that the stem cells’ and xenografts’ “bio-identities” become stabilized through high expectations for the future, a lack of therapeutic possibilities and struggles over definitions of life. The policy processes around human embryonic stem cells and organs from other animals, are characterized by a normalization of certain understandings of ”life”, trust in scientific progress and it’s national financial potentials and a categorization of criticism as irrational. Through these “bio-objectification processes”, debate and decision making has been moved from a political and public context into ethical committees and research funding bodies. The article concludes by discussing consequences of this political non-handling of biomedical technologies and how these bioobjects could be re-politicized.