Genetic erosion risk by environmental and antropic factor applied on strategies for Lychnophora ericoides conservation

This study evaluated the genetic erosion risk factors and the strategic points for the conservation of Lychnophora ericoides population in “Paraíso Perdido” farm, Serra da Canastra (20° 37’ 54” S; 46° 19’ 37” W; 833 m height) in São João Batista do Glória City, Minas Gerais State, Brazil. The number of young and adult plants, the soil and the phenology were evaluated in two sample areas of 125 m2. Information about the species utilization was obtained with local informants. Data on the region were obtained through literature review, in loco evaluation, GPS and geo-referenced map. In addition, local use of the plant for mixtures of drug was evaluated. According to the results obtained, the soil of the population is lithic with a weathered portion of frank-sandy texture, very acidic and dystrophic. The population density is 0.16 individuals/m2, 0.078 young/adult plant. The predominant phenophase was fruiting (100% plants) followed by flowering (21.62% plants). The local community uses the leaves of the plant in the form of hydroalcoholic extracts, as anti-inflammatory. Based on the evaluated parameters, the population is at 73% risk of genetic erosion. The detected key points were the development of activities including the participation of the local community for habitat protection as well as germplasm collection, seedlings production and reintroduction, together with environmental education, supervision, and reduction in the propensity for fire.

Reduction of Soil Erosion on Forest Roads

Results of onsite erosion control work from across the United States provide estimates of the amount of erosion reduction on forest roads from various treatments. Supplementary information includes the effects of slope gradient, soil characteristics, and ground cover. Estimates of sediment travel below fillslopes can be made, together with the combined effect of erosion control treatments of the running surface, road cut, and ditch.

Population biology of Excirolana armata (Dana, 1853) (Isopoda, Cirolanidae) on an exposed sandy beach in Southeastern Brazil

The reproductive biology and population dynamics of the cirolanid isopod Excirolana armata (Dana, 1853) were analysed through monthly samples from December 2003 to November 2005 on Una beach, Sao Paulo state (24 degrees S), in Southeastern Brazil. Sampling was performed along three transects established from the base of foredunes to the waterline. On Una beach, E. armata showed continuous reproduction with higher abundances of ovigerous females in winter and spring (July-November) with a higher peak of juveniles in spring (November 2004). The fecundity ranged from 2 to 18 eggs/embryos per female, depending on the female length. The incubation period was estimated as 2 months. The life span of males and females was nearly 1 year. The short life span and the high energetic expenditure inherent to reproduction with maternal care, probably kept females from producing more than one brood in their lifetime. When comparing the population of E. armata on Una beach (24 degrees S) with populations in Southern Brazil (32 degrees S), Uruguay (34 degrees S) and Argentina (36 degrees S), it was verified that several biological population traits (length of the smallest juvenile, length of the largest individual, length of the smallest and largest ovigerous females, range of fecundity and life span) tended to increase at higher latitudes, whereas other traits (instantaneous rate of mortality and the curvature parameter of von Bertalanffy growth function) tended to decrease. However, comparing E. armata on Una beach (24 degrees S) with a population situated at a close latitude (25 degrees S), unexpected differences in relation to population structure and to growth demonstrated and reinforced the importance of density-dependent factors over life history traits of E. armata on dissipative beaches.

Biomonitoring study of seasonal anthropogenic influence at the Itamambuca beach (SP, Brazil)

The present work is focused on the study of a seasonal anthropogenic influence on the beach of Itamambuca (Ubatuba, SP, Brazil) carried out using Atherinella brasiliensis as biomonitor. In total 84 fish were caught between July 2004 and February 2005 in different locations at the beach and inside the Itamambuca river. The fish were pooled according to catch and their musculature was analyzed by Particle-Induced X-ray Emission (PIXE) and Rutherford Backscattering (RBS) techniques. While the concentration of light (matrix) elements like C and O were obtained using the RBS technique, major (Na, Mg, P, S, Cl, K and Ca) and trace (Si, Al, Ti, Cr, Mn, Fe, Ni, Cu, Zn, As, Se, Br and Sr) elements were measured by PIXE. The results show that differences were observed for several elemental concentrations of fish tissue between high season (spring-summer) and low season (winter-fall), indicating that increased human activity in the beach during high season may have some impact on the beach ecosystem. The role of the water salinity in the results is also discussed. (C) 2009 Elsevier B.V. All rights reserved.

Occurrence and behavior of butyltins in intertidal and shallow subtidal surface sediments of an estuarine beach under different sampling conditions

Contamination by butyltin compounds (BTs) has been reported in estuarine environments worldwide, with serious impacts on the biota of these areas. Considering that BTs can be degraded by varying environmental conditions such as incident light and salinity, the short-term variations in such factors may lead to inaccurate estimates of BTs concentrations in nature. Therefore, the present study aimed to evaluate the possibility that measurements of BTs in estuarine sediments are influenced by different sampling conditions, including period of the day (day or night), tidal zone (intertidal or subtidal), and tides (high or low). The study area is located on the Brazilian southeastern coast, Sao Vicente Estuary, at Pescadores Beach, where BT contamination was previously detected. Three replicate samples of surface sediment were collected randomly in each combination of period of the day, tidal zone, and tide condition, from three subareas along the beach, totaling 72 samples. BTs were analyzed by GC-PFPD using a tin filter and a VF-5 column, by means of a validated method. The concentrations of tributyltin (TBT), dibutyltin (DBT), and monobutyltin (MBT) ranged from undetectable to 161 ng Sn g(-1) (d.w.). In most samples (71%), only MBT was quantifiable, whereas TBTs were measured in only 14, suggesting either an old contamination or rapid degradation processes. DBT was found in 27 samples, but could be quantified in only one. MBT concentrations did not differ significantly with time of day, zones, or tide conditions. DBT and TBT could not be compared under all these environmental conditions, because only a few samples were above the quantification limit. Pooled samples of TBT did not reveal any difference between day and night. These results indicated that, in assessing contamination by butyltin compounds, surface-sediment samples can be collected in any environmental conditions. However, the wide variation of BTs concentrations in the study area, i.e., over a very small geographic scale, illustrates the need for representative hierarchical and composite sampling designs that are compatible with the multiscalar temporal and spatial variability common to most marine systems. The use of such sampling designs will be necessary for future attempts to quantitatively evaluate and monitor the occurrence and impact of these compounds in nature

EROSION LOSSES FROM RUNOFF: INTERACTION OF SOIL COVER AND EROSION CONTROL PRACTICE

The flow of sediment from cropped land is the main pollutant of water sources in rural areas. Due to this fact, it is necessary to develop and implement technologies that will reduce water and sediment discharges. Accordingly, an experiment was conducted in the Department of Biosystems Engineering - ESALQ / USP, Piracicaba - SP with the objective to evaluate the effect of different soil cover (bean, grass and bare ground) and erosion control practices (wide base terraces and infiltration furrows in slopes (no practices to control erosion)) while measuring water losses in runoff. The statistical design adopted was randomized blocks in a 3x3 factorial scheme resulting in 9 treatments with 3 replicates (blocks). The period of rainfall data collection was December 6, 2007 to April 11, 2008. A 21.1 cm diameter rain gauge was installed in the experimental area. Terraces were the most efficient practices for reducing erosion losses in the treatments with infiltration furrows being better than the control treatment. Bean was more effective than grass in reducing erosion. Bare ground was the least efficient.

Probing the Enamel Topography After Acid Erosion by Scanning Electrochemical Microscopy

In this work, we present an investigation on the thickness of the eroded enamel layer in tooth samples after exposure to citric and hydrochloric acid by using Scanning Electrochemical Microscopy (SECM). Approaching curves with typical negative feedback behavior were obtained in enamel samples for evaluation of topographic changes. In a control experiment, SECM images showed no significant difference in the current monitored during the scan, implying that enamel demineralization did not occur in mineral water medium. Topographic SECM images obtained after contact with citric and hydrochloric acid for different periods of time showed a significant increase in the current relative to a previously protected surface, indicating the structural loss of enamel. The thickness of the enamel layer eroded after contact with hydrochloric acid was significantly higher when compared to the one obtained with citric acid. Hence, our results showed that the enamel acid erosion is a relatively fast process, which is strongly dependent on parameters such as pH, time, acid strength and acid concentration.

Effect of NaF and TiF4 varnish and solution on bovine dentin erosion plus abrasion in vitro

Objectives. This in vitro study aimed to analyze the effect of TiF4 compared to NaF varnishes and solutions, to protect against dentin erosion associated with abrasion. Materials and methods. Bovine dentin specimens were pre-treated with NaF-Duraphat (2.26% F), NaF/CaF2-Duofluorid (5.63% F), experimental-NaF (2.45% F), experimental-TiF4 (2.45% F) and placebo varnishes; NaF (2.26% F) and TiF4 (2.45% F) solutions. Controls remained untreated. The erosive pH cycling was performed using a soft drink (pH 2.6) 4 x 90 s/day and the toothbrushing-abrasion 2 x 10 s/day, in vitro for 5 days. Between the challenges, the specimens were exposed to artificial saliva. Dentin tissue loss was measured profilometrically (mu m). Results. ANOVA/Tukey's test showed that all fluoridated varnishes (Duraphat, 7.5 +/- 1.1; Duofluorid, 6.8 +/- 1.1; NaF, 7.2 +/- 1.9; TiF4, 6.5 +/- 1.0) were able to significantly reduce dentin tissue loss (40.7% reduction compared to control) when compared to placebo varnish (11.2 +/- 1.3), control (11.8 +/- 1.7) and fluoridated (NaF, 9.9 +/- 1.8; TiF4, 10.3 +/- 2.1) solutions (p < 0.0001), which in turn did not significantly differ from each other. Conclusion. All fluoridated varnishes, but not the solutions, had a similar performance and a good potential to reduce dentin tissue loss under mild erosive and abrasive conditions in vitro. Risk patients for erosion and abrasion, especially those with exposed dentin, should benefit from this clinical preventive measure. Further research has to confirm this promising result in the clinical situation.

Calcium glycerophosphate supplemented to soft drinks reduces bovine enamel erosion

Objective: This in vitro study evaluated the effect of calcium glycerophosphate (CaGP) supplemented to soft drinks on bovine enamel erosion. Material and methods: Four pH-cycles were performed, alternating demineralization by the beverage and remineralization in artificial saliva. Results: Mean wear (+/- SD, mu m) was 7.91 +/- 1.13, 7.39 +/- 1.01, 7.50 +/- 0.91 and 5.21 +/- 1.08 for Coca-Cola (TM) without CaGP or containing CaGP at 0.1, 1.0 or 2.0 mM, respectively, while no wear was detected for CaGP at 5.0 and 10.0 mM. Corresponding figures for Sprite Zero (TM) without CaGP or containing CaGP at 0.1, 1.0, 2.0, 5.0 or 10.0 mM were 8.04 +/- 1.30, 7.84 +/- 0.71, 7.47 +/- 0.80, 4.96 +/- 0.81, 3.99 +/- 0.10 and 1.87 +/- 0.12, respectively. Conclusion: Supplementation of both beverages with CaGP seems to be an alternative to reduce their erosive potential.

Secondary production of sandy beach macrofauna: An evaluation of predictive models

During the last three decades, several predictive models have been developed to estimate the somatic production of macroinvertebrates. Although the models have been evaluated for their ability to assess the production of macrobenthos in different marine ecosystems, these approaches have not been applied specifically to sandy beach macrofauna and may not be directly applicable to this transitional environment. Hence, in this study, a broad literature review of sandy beach macrofauna production was conducted and estimates obtained with cohort-based and size-based methods were collected. The performance of nine models in estimating the production of individual populations from the sandy beach environment, evaluated for all taxonomic groups combined and for individual groups separately, was assessed, comparing the production predicted by the models to the estimates obtained from the literature (observed production). Most of the models overestimated population production compared to observed production estimates, whether for all populations combined or more specific taxonomic groups. However, estimates by two models developed by Cusson and Bourget provided best fits to measured production, and thus represent the best alternatives to the cohort-based and size-based methods in this habitat. The consistent performance of one of these Cusson and Bourget models, which was developed for the macrobenthos of sandy substrate habitats (C&B-SS), shows that the performance of a model does not depend on whether it was developed for a specific taxonomic group. Moreover, since some widely used models (e.g., the Robertson model) show very different responses when applied to the macrofauna of different marine environments (e.g., sandy beaches and estuaries), prior evaluation of these models is essential.

Production of Excirolana armata (Dana, 1853) (Isopoda, Cirolanidae) on an exposed sandy beach in southeastern Brazil

The somatic and gonad productions of the cirolanid isopod Excirolana armata were analyzed by taking monthly samples from December 2003 to November 2005 on Una beach, So Paulo state (24A degrees S), southeastern Brazil. Sampling was performed along three fixed transects established from the base of the foredunes to the waterline. Weight-specific growth rate was used to estimate the E. armata somatic production for 2004 and 2005, separately. The gonad production was estimated based on the monthly reproductive potential (mean number of eggs/embryos per female x monthly abundance of ovigerous females with near-release broods) for 2004. The annual somatic production of E. armata population varied from 15.57 to 17.25 g AFDW m(-1) year(-1) and the somatic production/biomass ratio (P (s)/B) from 3.55 to 3.14 year(-1) for 2004 and 2005, respectively. The P (s)/B ratios were higher for males (4.02 and 3.19 year(-1) for 2004 and 2005) than for females (3.10 year(-1) for both years). The annual gonad production (P (g) = 1.07 g AFDW m(-1) year(-1)) contributed about 15 and 6% to the total production (P (s) + P (g)) of females and the population, respectively. The proportion of gonad to somatic production of females (P (g)/P (s)) increased with individual size (ca 90% in the 7.5 mm size class), and the annual weight-specific gonad production (P (g)/B ratio) was estimated to 0.24 year(-1). The high P (s)/B ratios estimated for E. armata derive from the fast growth of individuals and show the importance of this population to the energy flow on Una beach ecosystem. However, the low percentage of juveniles verified in this population and in other studies of populations of the genus Excirolana is discussed as an important source of underestimation of P (s)/B ratio.

Screening of CO2 Laser (10.6 mu m) Parameters for Prevention of Enamel Erosion

Objective: The aim of this study was to screen CO2 laser (10.6 mu m) parameters to increase enamel resistance to a continuous-flow erosive challenge. Background data: A new clinical CO2 laser providing pulses of hundreds of microseconds, a range known to increase tooth acid-resistance, has been introduced in the market. Methods: Different laser parameters were tested in 12 groups (n = 20) with varying fluences from 0.1 to 0.9 J/cm(2), pulse durations from 80 to 400 mu s and repetition rates from 180 to 700 Hz. Non-lased samples (n = 30) served as controls. All samples were eroded by exposure to hydrochloric acid (pH 2.6) under continuous acid flow (60 mu L/min). Calcium and phosphate release into acid was monitored colorimetrically at 30 sec intervals up to 5 min and at 1 min intervals up to a total erosion time of 15 min. Scanning electron microscopic (SEM) analysis was performed in lased samples (n = 3). Data were statistically analysed by one-way ANOVA (p < 0.05) and Dunnett's post-hoc tests. Results: Calcium and phosphate release were significantly reduced by a maximum of 20% over time in samples irradiated with 0.4 J/cm(2) (200 mu s) at 450 Hz. Short-time reduction of calcium loss (<= 1.5 min) could be also achieved by irradiation with 0.7 J/cm(2) (300 mu s) at 200 and 300 Hz. Both parameters revealed surface modification. Conclusions: A set of CO2 laser parameters was found that could significantly reduce enamel mineral loss (20%) under in vitro erosive conditions. However, as all parameters also caused surface cracking, they are not recommended for clinical use.

The erosion and abrasion-inhibiting effect of TiF4 and NaF varnishes and solutions on enamel in vitro

Objective. Previous in vitro study has shown that TiF(4) varnish might reduce enamel erosion. No data regarding the effect of this experimental varnish on enamel erosion plus abrasion, however, are available so far. Thus, this in vitro study aimed to analyse the effect of TiF4 compared with NaF varnishes and solutions, to protect against enamel erosion with or without abrasion. Methods. Enamel specimens were pre-treated with experimental-TiF4 (2.45% F), experimentalNaF (2.45% F), NaF-Duraphat (2.26% F), and placebo varnishes; NaF (2.26% F) and TiF4 (2.45% F) solutions. Controls remained untreated. The erosive challenge was performed using a soft drink (pH 2.6) 4 u 90 s / day (ERO) and the toothbrushing abrasion (ERO+ ABR) 2 u 10 s / day, for 5 days. Between the challenges, the specimens were exposed to artificial saliva. Enamel loss was measured profilometrically (lm). Results. Kruskal-Wallis / Dunn tests showed that all fluoridated varnishes (TiF4-ERO: 0.53 +/- 0.20, ERO+ ABR: 0.65 +/- 0.19/ NaF-ERO: 0.94 +/- 0.18, ERO+ ABR: 1.74 +/- 0.37 / Duraphat-ERO: 1.00 +/- 0.37, ERO+ ABR: 1.72 +/- 0.58) were able to significantly reduce enamel loss when compared with placebo varnish (ERO: 3.45 +/- 0.41 / ERO+ ABR: 3.20 +/- 0.66) (P < 0.0001). Placebo varnish, control (ERO: 2.68 +/- 0.53 / ERO+ ABR: 3.01 +/- 0.34), and fluoridated (NaF-ERO: 2.84 +/- 0.09 / ERO+ ABR: 2.40 +/- 0.21 / TiF4-ERO: 3.55 +/- 0.59 / ERO+ ABR: 4.10 +/- 0.38) solutions did not significantly differ from each other. Conclusion. Based on the results, it can be concluded that the TiF4 varnish seems to be a promising treatment to reduce enamel loss under mild erosive and abrasive conditions in vitro.

Gastroesophageal reflux, dental erosion, and halitosis in epidemiological surveys: a systematic review

In published studies, it has been suggested that dental wear is associated with gastroesophageal reflux disease (GERD). This systematic review was carried out to evaluate the association of GERD, dental erosion, and halitosis and to compare the indices adopted in epidemiological surveys. The Medline database (until October, 2011) was searched systematically to identify studies evaluating the prevalence of oral alterations, such as dental erosion and halitosis, in patients with GERD symptoms. Two reviewers analyzed all reports and the selected studies were evaluated according to the quality of evidence, using the validated Newcastle–Ottawa Quality Assessment Scale. Full-text copies of a total of 32 publications were obtained in duplicate. Sixteen publications were identified among the citations in the Bibliographic lists of studies that fulfilled the exclusion/inclusion criteria and quality of evidence. The relationship between dental erosion and GERD patients was significant in only seven studies. According to three studies, halitosis could be one of several extraesophageal symptoms or manifestations in GERD patients. In one study, it was found that the mucosa of GERD patients was significantly more acidic in comparison with that of the control group. This systematic review showed that there is a relationship between GERD and oral diseases (dental erosion and halitosis). The epidemiological surveys used different indices to analyze GERD and dental erosion. Further research could investigate the best method for assessing the two diseases.