Identification of Network-Based Risk Factors Associated with Gonorrhea

The evolving antimicrobial resistance coupled with a recent increase in incidence highlights the importance of reducing gonococcal transmission. Establishing novel risk factors associated with gonorrhea facilitates the development of appropriate prevention and disease control strategies. Sexual Network Analysis (NA), a novel research technique used to further understand sexually transmitted infections, was used to identify network-based risk factors in a defined region in Ontario, Canada experiencing an increase in the incidence of gonorrhea. Linear network structures were identified as important reservoirs of gonococcal transmission. Additionally, a significant association between a central network position and gonorrhea was observed. The central participants were more likely to be younger, report a greater number of risk factors, engage in anonymous sex, have multiple sex partners in the past six months and have sex with the same sex. The network-based risk factors identified through sexual NA, serving as a method of analyzing local surveillance data, support the development of strategies aimed at reducing gonococcal spread.

Intracellular trafficking of protease : Activated Receptor 2 (PAR2) by members of sorting nexins family

Le dogme voulant que les récepteurs couplés aux protéines G (GPCRs) activent des voies de signalisation seulement lorsqu’ils sont localisés à la membrane plasmatique, a récemment été remis en question. Des données récentes indiquent que certains GPCRs peuvent également induire une réponse intracellulaire à partir des compartiments intracellulaires dont le noyau. Les récepteurs activés par la protéase (PAR) sont des membres de la famille GPCR. Les PARs sont activés par le clivage de la partie N–terminale du récepteur ce qui permet au ligand attaché sur le récepteur de se lier à sa poche réceptrice. Quatre PARs ont été décrits : PAR1, PAR2, PAR3 et PAR4. PAR2 peut susciter des effets mitogéniques et participer aux processus comme l’angiogenèse et l'inflammation. Alors que beaucoup d'effets intracellulaires de PAR2 peuvent être expliqués lorsqu’il est localisé à la membrane plasmatique, une fonction intracrine de PAR2 a aussi été proposée. Pourtant les mécanismes par lesquels PAR2 peut provoquer l’expression de gènes ciblés sont toujours inconnus. Le but de notre étude était de vérifier l’existence d’une population nucléaire de PAR2. Nous avons également émis l’hypothèse que les voies activées par l’activation de PAR2 dépendent de sa localization cellulaire. En utilisant des techniques de microscopie confocale et de "Western Blot" nous avons démontré la présence d’une population nucléaire de PAR2. À la suite de la stimulation de PAR2, nous avons observé une augmentation de la translocation du récepteur de la membrane plasmatique au noyau. En utilisant la technique de "RT – PCR", nous avons observé des rôles différents de PAR2 à la surface de la cellule et du noyau dans l’initiation de l’expression des gènes. Afin d’identifier les mécanismes responsables de la translocation nucléaire de PAR2, nous avons évalué l’implication des membres de la famille de "Sorting Nexins (SNX)" dans la translocation nucléaire de PAR2. "Sorting Nexins" est un groupe de protéines avec des fonctions de transport bien établies. SNX1 et SNX2 ont été identifiés comme responsables du transfert de PAR1 vers les lysosomes. SNX11 n'a pas encore été étudié et nous avons émis l’hypothèse qu'il pourrait être un autre membre de la famille des SNX impliqué dans la signalisation de PAR2. Pour ce faire, nous avons développé des "knockdowns" stables pour SNX1, SNX2 et SNX11 dans les cellules HEK293. En utilisant les essais d’immunofluorescence, "Western Blot" et de cytométrie en flux, nous avons déterminé que tous les trois membres du groupe SNX sont des partenaires d'interaction de PAR2. Toutefois, seul SNX11 se co-localise avec son partenaire au noyau et est responsable de sa translocation nucléaire. Les expériences de "RT - PCR" sur les lignées de cellule de SNXs "knockdowns" ont démontré que la fonction de PAR2 nucléaire dépend surtout de SNX11; néanmoins SNX1 et SNX2 peuvent aussi l’influencer, suggérant qu'ils font aussi partie du réseau signalétique de PAR2. En conclusion, PAR2 est déplacé de la membrane plasmatique à la membrane nucléaire après sa stimulation avec un agoniste. La translocation nucléaire de PAR2 par un mécanisme impliquant SNX11, initie des effets intracellulaires différents de sa signalisation membranaire. Mots clés : récepteurs couplés à la protéine G, “Sorting Nexins”, récepteurs activés par la protéase, translocation nucléaire, membrane nucléaire, signal nucléaire.

MicroRNA-34 induces cardiomyocyte apoptosis and accounts for the anti-apoptotic effect of Tanshinone IIA in myocardial infarction

MicroARN (miARN) ont récemment émergé comme un acteur central du gène réseau de régulation impliqués dans la prise du destin cellulaire. L'apoptose, un actif processus, par lequel des cellules déclenchent leur auto-destruction en réponse à un signal, peut être contrôlé par les miARN. Il a également été impliqué dans une variété de maladies humaines, comme les maladies du cœur, et a été pensé comme une cible pour le traitement de la maladie. Tanshinone IIA (TIIA), un monomère de phenanthrenequinones utilisé pour traiter maladies cardiovasculaires, est connu pour exercer des effets cardioprotecteurs de l'infarctus du myocarde en ciblant l'apoptose par le renforcement de Bcl-2 expression. Pour explorer les liens potentiels entre le miARN et l'action anti-apoptotique de TIIA, nous étudié l'implication possible des miARN. Nous avons constaté que l'expression de tous les trois membres de la famille miR-34, miR-34a, miR-34b et miR-34c ont été fortement régulée à la hausse après l'exposition soit à la doxorubicine, un agent endommageant l'ADN ou de pro-oxydant H2O2 pendant 24 heures. Cette régulation à la hausse causé significativement la mort cellulaire par apoptose, comme déterminé par fragmentation de l'ADN, et les effets ont été renversés par les ARNs antisens de ces miARN. Le prétraitement des cellules avec TIIA avant l'incubation avec la doxorubicine ou H2O2 a empêché surexpression de miR-34 et a réduit des apoptose. Nous avons ensuite établi BCL2L2, API5 et TCL1, en plus de BCL2, comme les gènes nouveaux cibles pour miR-34. Nous avons également élucidé que la répression des ces gènes par MiR-34 explique l'effet proapoptotique dans les cardiomyocytes. Ce que la régulation positive de ces gènes par TIIA realisée par la répression de l'expression de miR-34 est probable le mécanisme moléculaire de son effet bénéfique contre ischémique lésions cardiaques.

Early-onset and late-onset Alzheimer’s disease are associated with distinct patterns of memory impairment

The goal of this study was to investigate the specific patterns of memory breakdown in patients suffering from early-onset Alzheimer’s disease (EOAD) and late-onset Alzheimer’s disease (LOAD). Twenty EOAD patients, twenty LOAD patients, twenty matched younger controls, and twenty matched older controls participated in this study. All participants underwent a detailed neuropsychological assessment, an MRI scan, an FDG-PET scan, and AD patients had biomarkers as supporting evidence of both amyloïdopathy and neuronal injury. Results of the neuropsychological assessment showed that both EOAD and LOAD groups were impaired in the domains of memory, executive functions, language, praxis, and visuoconstructional abilities, when compared to their respective control groups. EOAD and LOAD groups, however, showed distinct patterns of memory impairment. Even though both groups were similarly affected on measures of episodic, short term and working memory, in contrast semantic memory was significantly more impaired in LOAD than in EOAD patients. The EOAD group was not more affected than the LOAD group in any memory domain. EOAD patients, however, showed significantly poorer performance in other cognitive domains including executive functions and visuoconstructional abilities. A more detailed analysis of the pattern of semantic memory performance among patient groups revealed that the LOAD was more profoundly impaired, in tasks of both spontaneous recall and semantic recognition. Voxel-Based Morphometry (VBM) analyses showed that impaired semantic performance in patients was associated with reduced gray matter volume in the anterior temporal lobe region, while PET-FDG analyses revealed that poorer semantic performance was associated with greater hypometabolism in the left temporoparietal region, both areas reflecting key regions of the semantic network. Results of this study indicate that EOAD and LOAD patients present with distinct patterns of memory impairment, and that a genuine semantic impairment may represent one of the clinical hallmarks of LOAD.

Fibre optic sensor for the detection of adulterant traces in coconut oil

The design and development of a fibre optic evanescent wave refractometer for the detection of trace amounts of paraffin oil and palm oil in coconut oil is presented. This sensor is based on a side-polished plastic optical fibre. At the sensing region, the cladding and a small portion of the core are removed and the fibre nicely polished. The sensing region is fabricated in such a manner that it sits perfectly within a bent mould. This bending of the sensing region enhances its sensitivity. The oil mixture of different mix ratios is introduced into the sensing region and we observed a sharp decrease in the output intensity. The observed variation in the intensity is found to be linear and the detection limit is 2% (by volume) paraffin oil/palm oil in coconut oil. The resolution of this refractometric sensor is of the order of 10−3. Since coconut oil is consumed in large volumes as edible oil in south India, this fibre optic sensor finds great relevance for the detection of adulterants such as paraffin oil or palm oil which are readily miscible in coconut oil. The advantage of this type of sensor is that it is inexpensive and easy to set up. Another attraction of the side-polished fibre is that only a very small amount of analyte is needed and its response time is only 7 s.

Characterisation of the acid-base properties of pillared montmorillonites

Iron and mixed iron aluminium pillared montrnorillonites prepared by partial hydrolysis method were subjected to room temperature exchange with transition metals of the first series. The resulting materials were characterised by different spectroscopic techniques and surface area measurements. About 1-3% transition metals were incorporated into the porous network. The structural stability of the porous network was not affected by exchange. XRD and AI NMR spectroscopy evidenced the presence of iron substituted Al13 like polymers in FeAl pillared systems. Acidity and basicity benefited much as a result of metal exchange. Acidity and basicity were quantified by model reactions, viz., cumene cracking and cyclohexanol decomposition respectively. The presence of basic sites in otherwise acidic pillared clays, though diminutive in amount can be of much importance in acid base catalysed reactions.

Development of a Biometric Personal Authentication System Based on Fingerprint and Speech

Biometrics deals with the physiological and behavioral characteristics of an individual to establish identity. Fingerprint based authentication is the most advanced biometric authentication technology. The minutiae based fingerprint identification method offer reasonable identification rate. The feature minutiae map consists of about 70-100 minutia points and matching accuracy is dropping down while the size of database is growing up. Hence it is inevitable to make the size of the fingerprint feature code to be as smaller as possible so that identification may be much easier. In this research, a novel global singularity based fingerprint representation is proposed. Fingerprint baseline, which is the line between distal and intermediate phalangeal joint line in the fingerprint, is taken as the reference line. A polygon is formed with the singularities and the fingerprint baseline. The feature vectors are the polygonal angle, sides, area, type and the ridge counts in between the singularities. 100% recognition rate is achieved in this method. The method is compared with the conventional minutiae based recognition method in terms of computation time, receiver operator characteristics (ROC) and the feature vector length. Speech is a behavioural biometric modality and can be used for identification of a speaker. In this work, MFCC of text dependant speeches are computed and clustered using k-means algorithm. A backpropagation based Artificial Neural Network is trained to identify the clustered speech code. The performance of the neural network classifier is compared with the VQ based Euclidean minimum classifier. Biometric systems that use a single modality are usually affected by problems like noisy sensor data, non-universality and/or lack of distinctiveness of the biometric trait, unacceptable error rates, and spoof attacks. Multifinger feature level fusion based fingerprint recognition is developed and the performances are measured in terms of the ROC curve. Score level fusion of fingerprint and speech based recognition system is done and 100% accuracy is achieved for a considerable range of matching threshold

Non-destruct|ve testing of non-metallic materials using microwaves

The motivatitni for" the present work is from .a project sanctioned by TSRO. The work involved the development of a quick and reliable test procedure using microwaves, for tflue inspection of cured propellant samples and a method to monitor the curing conditions of propellant mix undergoing the curing process.Normal testing CHE the propellant samples involvecuttimg a piece from each carton and testing it for their tensile strength. The values are then compared with standard ones and based on this result the sample isaccepted or rejected. The tensile strength is a measure ofdegree of cure of the propellant mix. But this measurementis a destructive procedure as it involves cutting of the sample. Moreover, it does not guarantee against nonuniform curing due to power failure, hot air-line failure,operator error etc. This necessitated the need for the development of a quick and reliable non-destructive test procedure.

Investigations on the radiation characteristics of new hollow dielectric horn antennas

Investigations on the design and development of certain new hollow dielectric hom antennas of rectangular cross section have been carried out. The main shortcoming of the existing ordinary hollow dielectric hom antenna (HDH) is the abrupt discontinuity at the feed-end. A new launching technique using a dielectric rod is introduced to overcome this limitation. Also a strip loading technique is employed for further modification of the antenna. Radiation parameters of new I-IDH antennas of Eplane sectoral, H-plane sectoral and pyramidal types were studied and are found to be very attractive. Theoretical approach based on Marcatili’s principle and two aperture theory along with diffraction theory and image theory is used to support the experimental findings. The HDH is considered as solid horn of effective dielectric constant and the aperture field is evaluated. The antenna is excited by the open waveguide in the dominant TE1o mode and so the existence of any hybrid mode is mled-out. The theoretical results are observed to be in good agreement with the experimental results.

Studies On Vulcanization, Rheology And Reinforcement Of Natural Rubber Latex With Special Reference To Accelerator Combinations, Surface Active Agents And Gamma Irradiation

In the present work, studies on vulcanization, rheology and reinforcement of natural rubber latex with special reference to accelerator combinations, surface active agents and gamma irradiation have been undertaken. In vulcanization, the choice of vulcanization system, the extent and mc-zie of vulcanization and network structure of the vulcanizate are important factors contributing to the overall quality of the product. The vulcanization system may be conventional type using elemental sulfur or a system involving sulfur donors. The latter type is used mainly in the manufacture of heat resistant products. For improving the technical properties of the products such as modulus and tensile strength, different accelerator combinations are used. It is known that accelerators have a strong effect on the physical properties of rubber vulcanizates. A perusal of the literature indicates that fundamental studies on the above aspects of latex technology are very limited. Thereforea systematic study on vulcanization, rheology and reinforcement of natural rubber latex with reference to the effect of accelerator combinations, surface active agents and gamma irradiation has been undertaken. The preparation and evaluation of some products like latex thread was also undertaken as a part of the study. The thesis consists of six chapter

Changing Role of Academic Libraries in the E-learning Environment: Issues and Challenges

The development of computer and network technology is changing the education scenario and transforming the teaching and learning process from the traditional physical environment to the digital environment. It is now possible to access vast amount of information online and enable one to one communication without the confines of place or time. While E-learning and teaching is unlikely to replace face-to-face training and education it is becoming an additional delivery method, providing new learning opportunities to many users. It is also causing an impact on library services as the increased use of ICT and web based learning technologies have paved the way for providing new ICT based services and resources to the users. Online learning has a crucial role in user education, information literacy programmes and in training the library professionals. It can help students become active learners, and libraries will have to play a greater role in this process of transformation. The significance of libraries within an institution has improved due to the fact that academic libraries and information services are now responsible for e-learning within their organization.

Behavior of geopolymer concrete exposed to elevated temperatures

The research in the area of geopolymer is gaining momentum during the past 20 years. Studies confirm that geopolymer concrete has good compressive strength, tensile strength, flexural strength, modulus of elasticity and durability. These properties are comparable with OPC concrete.There are many occasions where concrete is exposed to elevated temperatures like fire exposure from thermal processor, exposure from furnaces, nuclear exposure, etc.. In such cases, understanding of the behaviour of concrete and structural members exposed to elevated temperatures is vital. Even though many research reports are available about the behaviour of OPC concrete at elevated temperatures, there is limited information available about the behaviour of geopolymer concrete after exposure to elevated temperatures. A preliminary study was carried out for the selection of a mix proportion. The important variable considered in the present study include alkali/fly ash ratio, percentage of total aggregate content, fine aggregate to total aggregate ratio, molarity of sodium hydroxide, sodium silicate to sodium hydroxide ratio, curing temperature and curing period. Influence of different variables on engineering properties of geopolymer concrete was investigated. The study on interface shear strength of reinforced and unreinforced geopolymer concrete as well as OPC concrete was also carried out. Engineering properties of fly ash based geopolymer concrete after exposure to elevated temperatures (ambient to 800 °C) were studied and the corresponding results were compared with those of conventional concrete. Scanning Electron Microscope analysis, Fourier Transform Infrared analysis, X-ray powder Diffractometer analysis and Thermogravimetric analysis of geopolymer mortar or paste at ambient temperature and after exposure to elevated temperature were also carried out in the present research work. Experimental study was conducted on geopolymer concrete beams after exposure to elevated temperatures (ambient to 800 °C). Load deflection characteristics, ductility and moment-curvature behaviour of the geopolymer concrete beams after exposure to elevated temperatures were investigated. Based on the present study, major conclusions derived could be summarized as follows. There is a definite proportion for various ingredients to achieve maximum strength properties. Geopolymer concrete with total aggregate content of 70% by volume, ratio of fine aggregate to total aggregate of 0.35, NaOH molarity 10, Na2SiO3/NaOH ratio of 2.5 and alkali to fly ash ratio of 0.55 gave maximum compressive strength in the present study. An early strength development in geopolymer concrete could be achieved by the proper selection of curing temperature and the period of curing. With 24 hours of curing at 100 °C, 96.4% of the 28th day cube compressive strength could be achieved in 7 days in the present study. The interface shear strength of geopolymer concrete is lower to that of OPC concrete. Compared to OPC concrete, a reduction in the interface shear strength by 33% and 29% was observed for unreinforced and reinforced geopolymer specimens respectively. The interface shear strength of geopolymer concrete is lower than ordinary Portland cement concrete. The interface shear strength of geopolymer concrete can be approximately estimated as 50% of the value obtained based on the available equations for the calculation of interface shear strength of ordinary portland cement concrete (method used in Mattock and ACI). Fly ash based geopolymer concrete undergoes a high rate of strength loss (compressive strength, tensile strength and modulus of elasticity) during its early heating period (up to 200 °C) compared to OPC concrete. At a temperature exposure beyond 600 °C, the unreacted crystalline materials in geopolymer concrete get transformed into amorphous state and undergo polymerization. As a result, there is no further strength loss (compressive strength, tensile strength and modulus of elasticity) in geopolymer concrete, whereas, OPC concrete continues to lose its strength properties at a faster rate beyond a temperature exposure of 600 °C. At present no equation is available to predict the strength properties of geopolymer concrete after exposure to elevated temperatures. Based on the study carried out, new equations have been proposed to predict the residual strengths (cube compressive strength, split tensile strength and modulus of elasticity) of geopolymer concrete after exposure to elevated temperatures (upto 800 °C). These equations could be used for material modelling until better refined equations are available. Compared to OPC concrete, geopolymer concrete shows better resistance against surface cracking when exposed to elevated temperatures. In the present study, while OPC concrete started developing cracks at 400 °C, geopolymer concrete did not show any visible cracks up to 600 °C and developed only minor cracks at an exposure temperatureof 800 °C. Geopolymer concrete beams develop crack at an early load stages if they are exposed to elevated temperatures. Even though the material strength of the geopolymer concrete does not decrease beyond 600 °C, the flexural strength of corresponding beam reduces rapidly after 600 °C temperature exposure, primarily due to the rapid loss of the strength of steel. With increase in temperature, the curvature at yield point of geopolymer concrete beam increases and thereby the ductility reduces. In the present study, compared to the ductility at ambient temperature, the ductility of geopolymer concrete beams reduces by 63.8% at 800 °C temperature exposure. Appropriate equations have been proposed to predict the service load crack width of geopolymer concrete beam exposed to elevated temperatures. These equations could be used to limit the service load on geopolymer concrete beams exposed to elevated temperatures (up to 800 °C) for a predefined crack width (between 0.1mm and 0.3 mm) or vice versa. The moment-curvature relationship of geopolymer concrete beams at ambient temperature is similar to that of RCC beams and this could be predicted using strain compatibility approach Once exposed to an elevated temperature, the strain compatibility approach underestimates the curvature of geopolymer concrete beams between the first cracking and yielding point.

Alley cropping of willows and grassland for bioenergy provision: productivity, tree-crop interactions and energy balance

The demand for biomass for bioenergy has increased rapidly in industrialized countries in the recent years. Biogenic energy carriers are known to reduce CO2 emissions. However, the resource-inefficient production of biomass often caused negative impacts on the environment, e.g. biodiversity losses, nitrate leaching, and erosion. The detrimental effects evolved mainly from annual crops. Therefore, the aim of modern bioenergy cropping systems is to combine yield stability and environmental benefits by the establishment of mixed-cropping systems. A particular emphasis is on perennial crops which are perceived as environmentally superior to annual crops. Agroforestry systems represent such mixed perennial cropping systems and consist of a mix of trees and arable crops or grassland within the same area of land. Agroforestry practices vary across the globe and alley cropping is a type of agroforestry system which is well adapted to the temperate zone, with a high degree of mechanization. Trees are planted in rows and crops are planted in the alleyways, which facilitates their management by machinery. This study was conducted to examine a young alley cropping system of willows and two grassland mixtures for bioenergy provision under temperate climate conditions. The first part of the thesis identified possible competition effects between willows and the two grassland mixtures. Since light seemed to be the factor most affecting the yield performance of the understory in temperate agroforestry systems, a biennial in situ artificial shade experiment was established over a separate clover-grass stand to quantify the effects of shade. Data to possible below- and aboveground interactions among willows and the two grassland mixtures and their effects on productivity, sward composition, and quality were monitored along a tree-grassland interface within the alleys. In the second part, productivity of the alley cropping system was examined on a triennial time frame and compared to separate grassland and willow stands as controls. Three different conversion technologies (combustion of hay, integrated generation of solid fuel and biogas from biomass, whole crop digestion) were applied to grassland biomass as feedstock and analyzed for its energetic potential. The energetic potential of willow wood chips was calculated by applying combustion as conversion technique. Net energy balances of separate grassland stands, agroforestry and pure willow stands evaluated their energy efficiency. Results of the biennial artificial shade experiment showed that severe shade (80 % light reduction) halved grassland productivity on average compared to a non-shaded control. White clover as heliophilous plant responded sensitively to limited radiation and its dry matter contribution in the sward decreased with increasing shade, whereas non-leguminous forbs (mainly segetal species) benefited. Changes in nutritive quality could not be confirmed by this experiment. Through the study on interactions within the alleys of the young agroforestry system it was possible to outline changes of incident light, soil temperature and sward composition of clover-grass along the tree-grassland interface. Nearly no effects of trees on precipitation, soil moisture and understory productivity occurred along the interface during the biennial experiment. Considering the results of the productivity and the net energy yield alley cropping system had lower than pure grassland stands, irrespective of the grassland seed mixture or fertilization, but was higher than that for pure willow stands. The comparison of three different energetic conversion techniques for the grassland biomass showed highest net energy yields for hay combustion, whereas the integrated generation of solid fuel and biogas from biomass (IFBB) and whole crop digestion performed similarly. However, due to the low fuel quality of hay, its direct combustion cannot be recommended as a viable conversion technique, whereas IFBB fuels were of a similar quality to wood chip from willow.

Optimizing the Dynamic Distribution of Data-stream for High Speed Communications

The performances of high-speed network communications frequently rest with the distribution of data-stream. In this paper, a dynamic data-stream balancing architecture based on link information is introduced and discussed firstly. Then the algorithms for simultaneously acquiring the passing nodes and links of a path between any two source-destination nodes rapidly, as well as a dynamic data-stream distribution planning are proposed. Some related topics such as data fragment disposal, fair service, etc. are further studied and discussed. Besides, the performance and efficiency of proposed algorithms, especially for fair service and convergence, are evaluated through a demonstration with regard to the rate of bandwidth utilization. Hoping the discussion presented here can be helpful to application developers in selecting an effective strategy for planning the distribution of data-stream.

Entrepreneurship, ties and relational networks: the case of a public-private cross-border tourism product

The thesis aims to understand the processes of entrepreneurship that try to create businesses or products with a high degree of complexity. This complexity comes from the fact that these products or initiatives can only be viable with the concurrence of a large number of heterogeneous actors (public, private, from different regions, etc..) which interact in a relational context. A case with these characteristics is the Camí dels Bons Homes. The thesis analyzes the evolution of the relational network from the point of view of its structure and content of its links. The results show and explain the observed changes in the network structure and the changes in the ties content. This analysis of the content of ties contributes to a new systematization and operationalization of ties’ content. Moreover this analysis takes in account negative ties, a less discussed issue in literature.