785 resultados para Attitudes and durability
Resumo:
Dental ceramics are presented within a simplifying framework allowing for facile understanding of their development, composition and indications. Engineering assessments of clinical function are dealt with and literature is reviewed on the clinical behaviour of all-ceramic systems. Practical aspects are presented regarding the choice and use of dental ceramics to maximize aesthetics and durability, emphasizing what we know and how we know it.
Resumo:
Includes bibliography
Resumo:
Background: Ocular prosthesis materials should have specific properties for their indication and durability; therefore, it is important to investigate their physical behaviour when affected by several disinfectants. Objectives: This study evaluated the influence of different disinfecting solutions on the microhardness and surface roughness of acrylic resins for ocular prosthesis. Materials and Methods: Fifty samples simulating ocular prostheses were fabricated with N1 resin and colourless resin and divided (n = 10) according to the disinfectant used: neutral soap, Opti-free, Efferdent, 1% hypochlorite (HYC) and 4% chlorhexidine (CHX). Samples were stored in saline solution at 37°C and disinfected during 120 days. Both microhardness and roughness were investigated before, after 60 days and 120 days of disinfection and storage. Microhardness was measured using a microhardner and the roughness with a roughness device. Results: N1 resin showed lower microhardness when compared with colourless resin (p < 0.05). HYC and CHX groups exhibited the highest change of microhardness and roughness values (p < 0.05). An increase in roughness and reduction in microhardness of ocular acrylic resins were observed after both periods of disinfection and storage (p < 0.05). Conclusion: Both disinfection/storage periods affected the microhardness and roughness values of the samples. © 2012 The Gerodontology Society and John Wiley & Sons A/S.
Resumo:
It is known that several factors can affect the clinical success and durability of fixed partial dentures. Therefore, the aim of the present study was to present a literature review about the longevity, clinical success, and quality, as well as, patients' and dental surgeons' satisfaction of ceramic fixed dentures. High rate of patients' satisfaction has been observed in relation to the esthetic of ceramic crowns. In addition, the literature has shown that dental ceramics can be used in several clinical situations with high success rate and longevity. Despite of failures and complications of ceramic restorations, nowadays, with the improvement of mechanical properties of such materials, ceramic crowns present a favorable prognosis and can be used in several clinical situations with high success rate, clinical quality, and great patients' satisfaction. © 2013 The American Ceramic Society.
Resumo:
Includes bibliography
Resumo:
The paper discusses the application of High Strength Concrete (HSC) technology for concrete production with the incorporation of Rice Husk Ash (RHA) residues by replacing a bulk of the material caking and rubber tires with partial aggregate volume, assessing their influence on the mechanical properties and durability. For concrete with RHA and rubber, it was possible to reduce the brittleness by increasing the energy absorbing capacity. With respect to abrasion, the RHA and rubber concretes showed lower mass loss than the concrete without residues, indicating that this material is attractive to be used in paving. It is thus hoped that these residues may represent a technological and ecological alternative for the production of concrete in construction works.
Resumo:
In this paper we study the behavior of a semi-active suspension witch external vibrations. The mathematical model is proposed coupled to a magneto rheological (MR) damper. The goal of this work is stabilize of the external vibration that affect the comfort and durability an vehicle, to control these vibrations we propose the combination of two control strategies, the optimal linear control and the magneto rheological (MR) damper. The optimal linear control is a linear feedback control problem for nonlinear systems, under the optimal control theory viewpoint We also developed the optimal linear control design with the scope in to reducing the external vibrating of the nonlinear systems in a stable point. Here, we discuss the conditions that allow us to the linear optimal control for this kind of non-linear system.
Resumo:
For the first time, regulatory protocols defined in the OECD guidelines were applied to determine the fate properties of a nanopesticide in two agricultural soils with contrasting characteristics. The nanoformulation studied had no effect on the degradation kinetics of atrazine indicating that (1) the release of atrazine from the polymer nanocarriers occurred rapidly relative to the degradation kinetics (half-lives 36-53 days) and/or that (2) atrazine associated with the nanocarriers was subject to biotic or abiotic degradation. Sorption coefficients, derived from a batch and a centrifugation technique at a realistic soil-to-solution ratio, were higher for the nanoformulated atrazine than for the pure active ingredient. Results indicate that the nanoformulation had an effect on the fate of atrazine. However, since the protocols applied were designed to assess solutes, conclusions about the transport of atrazine loaded onto the nanocarriers should be made extremely cautiously. The centrifugation method applied over time (here over 7 days) appears to be a useful tool to indirectly assess the durability of nanopesticides under realistic soil-to-solution ratios and estimate the period of time during which an influence on the fate of the active ingredient may be expected. More detailed investigations into the bioavailability and durability of nanopesticides are necessary and will require the development of novel methods suitable to address both the "nano" and "organic" characteristics of polymer-based nanopesticides.
Resumo:
Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)
Resumo:
Esthetics and durability of materials used to fabricate artificial eyes has been an important issue since artificial eyes are essential to restore esthetics and function, protect the remaining tissues and help with patients' psychological therapy. However, these materials are submitted to degrading effects of environmental agents on the physical properties of the acrylic resin. OBJECTIVE: This study assessed the color stability of acrylic resins used to fabricate sclera in three basic shades (N1, N2 and N3) when subjected to accelerated aging, mechanical and chemical polishing. MATERIAL AND METHODS: Specimens of each resin were fabricated and submitted to mechanical and chemical polishing. Chromatic analysis was performed before and after accelerated aging through ultraviolet reflection spectrophotometry. RESULTS: All specimens revealed color alteration following polishing and accelerated aging. The resins presented statistically significant chromatic alteration (p<0.01) between the periods of 252 and 1008 h. CONCLUSIONS: Both polishing methods presented no significant difference between the values of color derivatives of resins.
Resumo:
The failure of facial prostheses is caused by limitations in the properties of existing materials, especially flexibility and durability. Therefore, this study evaluated the marginal deterioration of a silicone used for fabrication of facial prostheses (Silastic MDX4-4210, Dow Corning Corporation, Midland, MI, USA) according to the influence of artificial aging, daily disinfection, and 2 types of pigmentation. Thirty specimens were fabricated and subdivided in 6 groups: without pigmentation, pigmented with make-up powder and iron oxide, and evaluated with and without the action of the disinfectant. Analysis of marginal deterioration was performed on a scanning electron microscope (magnification, ×5000) immediately 6 months and 1 year after fabrication of specimens, following the guidelines of ASTM International. After visual analysis of the photomicrographs, it was noticed that all groups presented marginal deterioration and alterations in surface texture with time. The use of disinfection did not contribute to the marginal deterioration of polymer (silicone), regardless of the pigmentation and artificial aging.
Resumo:
The aim of this study was to adapt and initiate validation of an instrument of attitudes toward mathematics to sports competitions. So through a correlational study, we adapted the instrument counting on a total sample of 260 young athletes (n=260), all students, divided into three rounds, and the confirmatory purpose we apply a pre competitive stress scale in order to show mappable symptoms. An initial reliability of the instrument, Alpha 0.83 to negative attitudes, and 0.90 for positive attitudes, with the average results of 2.52 (±0.86) to negative attitudes and 4.66 (±0.84) was determined for attitudes positive; we conclude that the instrument performed well in this first test, and should be applied in a larger sample, by un mounting this case study that young athletes have positive attitudes toward sports competition, so they enjoy participating in the competition.
Family Health Strategy Professionals Facing Medical Social Needs: difficulties and coping strategies
Resumo:
Professionals of Family Health Strategy (FHS) work in communities where there are complex medical social problems. These contexts may lead them to psychological suffering, jeopardizing their care for the users, and creating yet another obstacle to the consolidation of FHS as the primary health care model in Brazil. The study investigated the difficulties and coping strategies reported by health professionals of the FHS teams when they face medical social needs of the communities where they work. Focus groups and semi-structured interviews were carried out with 68 professionals of three primary care units in the city of Sao Paulo (Southeastern Brazil). Drug dealing and abuse, alcoholism, depression and domestic violence are the most relevant problems mentioned by the study group. Professionals reported lack of adequate training, work overload, poor working conditions with feelings of professional impotence and frustration. To overcome these difficulties, professionals reported collective strategies, particularly experience sharing during team meetings and matrix support groups. The results indicate that the difficulties may put the professionals in a vulnerable state, similar to the patients they care for. The promotion of specialized and long term support should be reinforced, as well as the interaction with the local network of services and communities leaders. That may help professionals to deal with occupational stress related to medical and social needs present in their routine work; in the end, it may as well contribute to the strengthening of FHS.
Resumo:
The police interview is one of the most important investigative tools that law enforcement has close at hand, and police interview methods have changed during the twentieth century. A good police interview is conducted in the frame of the law, is governed by the interview goal, and is influenced by facilitating factors that may affect the elicited report. The present doctoral dissertation focuses on police interviews in cases of very serious crimes of violence and sexual offences. Results reveal crime victims’ and perpetrators’ experiences of being interviewed and police officers’ attitudes towards conducting interviews related to traumatizing crimes. Study 1 revealed that when police officers interviewed murderers and sexual offenders, the interviewees perceived attitudes characterized by either dominance or humanity. Police interviews marked by dominance and suspects’ responses of anxiety were mainly associated with a higher proportion of denials, whereas an approach marked by humanity, and responses of being respected were significantly associated with admissions. In line with Study 1, the victims of rape and aggravated assault in Study 2 also revealed the experience of two police interview styles, where an interviewing style marked by dominance and responses of anxiety was significantly associated with crime victims’ omissions of information. Moreover, a humanitarian interviewing style, and crime victims’ feelings of being respected and co-operative, was significantly related to crime victims providing all information from painful events. Special squad police officers’ attitudes towards interviewing crime victims, in Study 3, also showed a humanitarian approach and two dominant approaches, one affective and the other refusing. The attitude towards interviewing suspects of crimes in focus revealed humanitarian and dominant interviewing attitudes, and an approach marked by kindness. The present thesis shows that, during their entire career, an overwhelming majority of the special squad police officers have experienced stressful events during patrol as well as investigative duty. Results show that symptoms from stressful event exposures and coping mechanisms are associated with negative attitudes towards interviewing suspects and supportive attitudes towards crime victim interviews. Thus, experiences from stressful exposures may automatically activate ego-defensive functions that automatically generate dominant attitudes. Moreover, it is important to offer police officers who have been exposed to stressful events the opportunity to work through their experiences, for example, through debriefing procedures. After debriefings, police officers are better prepared to meet crime victims and suspects and, through conscious closed-loop processes, to conduct police interviews without awaking ego-defensive functions.
Resumo:
The present dissertation focuses on burnout and work engagement among teachers, with especial focus on the Job-Demands Resources Model: Chapter 1 focuses on teacher burnout. It aims to investigate the role of efficacy beliefs using negatively worded inefficacy items instead of positive ones and to establish whether depersonalization and cynism can be considered two different dimensions of the teacher burnout syndrome. Chapter 2 investigates the factorial validity of the instruments used to measure work engagement (i.e. Utrecht Work Engagement Scale, UWES-17 and UWES-9). Moreover, because the current study is partly longitudinal in nature, also the stability across time of engagement can be investigated. Finally, based on cluster-analyses, two groups that differ in levels of engagement are compared as far as their job- and personal resources (i.e. possibilities for personal development, work-life balance, and self-efficacy), positive organizational attitudes and behaviours (i.e., job satisfaction and organizational citizenship behaviour) and perceived health are concerned. Chapter 3 tests the JD-R model in a longitudinal way, by integrating also the role of personal resources (i.e. self-efficacy). This chapter seeks answers to questions on what are the most important job demands, job and personal resources contributing to discriminate burned-out teachers from non-burned-out teachers, as well as engaged teachers from non-engaged teachers. Chapter 4 uses a diary study to extend knowledge about the dynamic nature of the JD-R model by considering between- and within-person variations with regard to both motivational and health impairment processes.