Eficiência Energética, Gestão de Energia e Integração de Renováveis em Instalações Hospitalares

A presente dissertação é o resultado de um estudo realizado entre Março de 2015 e Março de 2016 centrado no tema Eficiência Energética nos Edifícios, no âmbito da Dissertação do 2º ano do Mestrado em Engenharia Eletrotécnica – Sistemas Elétricos de Energia no Instituto Superior de Engenharia do Porto (ISEP). Atualmente, os edifícios são responsáveis por cerca de 40% do consumo de energia na maioria dos países da europa. Energia consumida, principalmente, no aquecimento, arrefecimento e na alimentação de aparelhos elétricos. Os hospitais, como grandes edifícios, são grandes consumidores de energia e, na maioria dos países europeus, situam-se entre os edifícios públicos menos eficientes. Neste contexto, representam um tipo de edifícios cuja atividade apresenta um potencial de poupança energético importante. O tipo de atividade aí desenvolvida, aliada às especificidades do sector da saúde, faz deste tipo de edifícios um alvo de análise e otimização energética bastante apetecível. O presente trabalho passa pelo estudo do potencial para a eficiência energética de um hospital situado na zona do Porto. Foi, inicialmente, efetuado um levantamento das necessidades energéticas, de modo a identificar os sectores prioritários de atuação. Este estudo conta com a análise dos consumos obtidos através do processo de monitorização, substituição da iluminação existente por uma mais eficiente, a instalação de painéis solares para reduzir o consumo destinado às águas quentes sanitárias, a substituição de caldeira a diesel por caldeira a biomassa, substituição de um chiller por um mais eficiente, entre outros. Os consumos registados no hospital em estudo serão comparados com um plano nacional (Eficiência Energética e Hídrica no Sistema Nacional de Saúde), para, desta forma, se perceber quais os consumos do hospital em estudo, quando comparados com outros hospitais.

A Recuperação da Informação em Dispositivos Móveis

Os Dispositivos Móveis envolvem uma série de aparelhos tecnológicos cujos protagonistas são os smartphones e os tablets que na atualidade superam os tradicionais desktops para acesso à rede. Com o objetivo de conceituar Dispositivos Móveis e apontar as características da recuperação da informação móvel, foi realizada pesquisa bibliográfica realizada na Scopus, Brapci (Base de dados referencial de artigos de periódicos em Ciência da Informação) e Google Acadêmico. Os resultados mostram o que é a recuperação da informação móvel, técnicas e áreas de pesquisa relacionadas. Conclui que existe pouca literatura científica sobre a temática e que são necessários mais estudos sobre a recuperação da informação móvel.

Caracterização elementar de ligas metálicas em implantes dentários

An ideal biomaterial for dental implants must have very high biocompatibility, which means that such materials should not provoke any serious adverse tissue response. Also, used metal alloys must have high fatigue resistance due the masticatory force and good corrosion resistance. These properties are rendered by using alpha and beta stabilizers, such as Al, V, Ni, Fe, Cr, Cu, Zn. Commercially pure titanium (TiCP) is used often for dental and orthopedic implants manufacturing. However, sometimes other alloys are employed and consequently it is essential to research the chemical elements present in those alloys that could bring prejudice for the health. Present work investigated TiCP metal alloys used for dental implant manufacturing and evaluated the presence of stabilizing elements within existing limits and standards for such materials. For alloy characterization and identification of stabilizing elements it was used EDXRF technique. This method allows to perform qualitative and quantitative analysis of the materials using the spectra of the characteristic X-rays emitted by the elements present in the metal samples. The experimental setup was based on two X- rays tubes (AMPTEK Mini X model with Ag and Au targets), a X-123SDD detector (AMPTEK) and a 0.5mm Cu collimator, developed due to the sample characteristics. The other experimental setup used as a complementary technique is composed of an X-ray tube with a Mo target, collimator 0.65mm and XFlash (SDD) detector - ARTAX 200 (BRUKER). Other method for elemental characterization by energy dispersive spectroscopy (EDS) applied in present work was based on Scanning Electron Microscopy (SEM) EVO® (Zeeis). This method also was used to evaluate the surface microstructure of the sample. The percentual of Ti obtained in the elementary characterization was among 93.35 ± 0.17% and 95.34 ± 0.19 %. These values are considered below the reference limit of 98.635% to 99.5% for TiCP, established by Association of metals centric materials engineers and scientists Society (ASM). The presence of elements Al and V in all samples also contributed to underpin the fact that are not TiCP implants. The values for Al vary between 6.3 ± 1.3% and 3.7 ± 2.0% and for V, between 0.26 ± 0.09% and 0.112 ± 0.048%. According to the American Society for Testing and Materials (ASTM), these elements should not be present in TiCP and in accordance with the National Institute of Standards and Technology (NIST), the presence of Al should be <0.01% and V should be of 0.009 ± 0.001%. Obtained results showed that implant materials are not exactly TiCP but, were manufactured using Ti-Al-V alloy, which contained Fe, Ni, Cu and Zn. The quantitative analysis and elementary characterization of experimental results shows that the best accuracy and precision were reached with X-Ray tube with Au target and collimator of 0.5 mm. Use of technique of EDS confirmed the results of EDXRF for Ti-Al-V alloy. Evaluating the surface microstructure by SEM of the implants, it was possible to infer that ten of the thirteen studied samples are contemporaneous, rough surface and three with machined surface.

Contribuição para o conhecimento da geologia do Grupo das Beiras (CXG) na região do Caramulo-Buçaco, Portugal Central

O presente trabalho ocupa-se do estudo do Complexo Xisto-Grauváquico ante-ordovícico (Grupo das Beiras) na região do Caramulo-Buçaco (centro de Portugal). Em termos geológicos, a área estudada pertence à Zona Centro Ibérica e encontra-se limitada a N pelo granito do Caramulo, a S pela bacia meso-cenozóica de Arganil, a W pelo sinclinal paleozóico do Buçaco e pela bacia meso-cenozóica ocidental portuguesa e a E pelo sinclinal paleozóico de Arganil e pelo plutonito granítico de Tábua-Santa Comba Dão; no seio da área estudada encontra-se a bacia meso-cenozóica de Mortágua. Com base nas características litológicas e estruturais distinguem-se no Complexo Xisto Grauváquico 4 grandes conjuntos litológicos concordantes entre si, designados de Unidades I, II, III e IV, que se desenvolvem da base para o topo de N para S. A Unidade I situa-se a N da região. O seu limite inferior é desconhecido, e o superior posiciona-se no último conjunto arenoso com potência decamétrica. É constituída por xistos cinzentos e negros com intercalações de arenitos de espessura não superior a 100 metros e de extensão lateral quilométrica. Apresenta uma espessura mínima de 1000 m. A Unidade II apresenta consideravelmente menor proporção de material arenoso intercalado entre os pelitos comparativamente à unidade inferior. É caracterizada por apresentar um predomínio de material silto-argiloso e escassos níveis arenosos com potência não superior à dezena de metros e escassa continuidade lateral. Cartograficamente esta unidade constitui uma franja alargada de orientação próxima a E-W. Apresenta uma espessura aproximada de 1500 m. A Unidade III é caracterizada pela presença de conjuntos arenosos com extensão lateral quilométrica e espessura de várias dezenas de metros, separados por material silto-argiloso. Os limites inferior e superior estão situados respectivamente abaixo e acima dos principais conjuntos arenosos. Esta unidade apresenta uma espessura máxima estimada na ordem dos 2000 m. A Unidade IV, que é a unidade superior, apresenta um predomínio pelítico, com escassas intercalações de conjuntos arenosos. O seu limite inferior encontra-se no topo do último conjunto arenoso da Unidade III. Apresenta uma espessura mínima de 500 m. As características sedimentológicas das 4 unidades indicam uma sedimentação num ambiente de plataforma externa siliciclástica aberta, com a construção de barras e por vezes sujeita à acção de tempestades, com sucessivos períodos de superficialização e profundização numa bacia de sedimentação bastante subsidente. Em termos estruturais, para além duma deformação pré-ordovícica, que é comprovada pelo forte mergulho e dispersão da orientação dos eixos da 1ª fase varisca e da lineação de intersecção L1, a área estudada foi principalmente afectada pela Orogenia Varisca. A 1ª fase de deformação varisca (F1) gerou dobras com superfícies axiais e xistosidade associada (S1) de direcção WNW-ESE, e forte pendor para NNE. Estas dobras D1 apresentam comprimentos de onda que nunca chegam a ser quilométricos, desenvolvendo-se um grande flanco inverso denunciando a presença de uma antiforma para NNE e uma sinforma para SSW. A 2ª fase de deformação varisca (F2) actuou na parte nordeste da área estudada e é caracterizada por ter gerado dobras de comprimento de onda quilométrico, com planos axiais e xistosidade associada S2 de direcção NW-SE, subverticais ou a pender fortemente para NE. Embora com alguma dispersão, as lineações de intersecção L2 e os eixos das dobras D2 apresentam maioritariamente forte pendor para E. A direcção e tipos de estruturas da F2 sugerem uma correlação com a terceira fase definida em vários pontos da Zona Centro Ibérica e estreitamente relacionada com as intrusões graníticas. Do ponto de vista petrológico, distinguem-se várias rochas sedimentares (pelitos e arenitos) todas elas sujeitas a metamorfismo que não ultrapassa a fácies dos xistos verdes. Dentro das rochas sedimentares mais grosseiras, há a destacar a presença de arenitos vulcânicos cuja composição denuncia, não muito afastados da bacia sedimentar, a presença de aparelhos vulcânicos que estariam em actividade durante a sedimentação. Foram analisadas isotopicamente 27 amostras de metapelitos colhidas em 5 locais diferentes de forma a abranger quase toda a área estudada. Os dados isotópicos de quatro destes locais de amostragem forneceram isócronas Rb-Sr, em rocha total, com valores da ordem dos 400-440 Ma. O granito do Caramulo, datado pela isócrona Rb-Sr em amostras de rocha total, forneceu uma idade de 326±12Ma. As idades modelo Sm-Nd (manto empobrecido) de 5 amostras de metapelitos estão compreendidas entre 1.35 e 1.25 Ga. Este período de tempo pode ser considerado como correspondendo à época de diferenciação mantélica da crusta que deu lugar à maioria das áreas fonte dos metapelitos.

Muscle fatigue resistance: comparison of Martin vigorimeter and Jamar dynamometer in community-dwelling people

Background: For the diagnosis of frailty exhaustion is a criteria currently measured by self-reported questionnaires, which are subjective and dependent on individual perception. The FR test has been developed as a bed side objective evaluation of muscle fatigue. The test was validated for the VM. However, the JD is frequently used to measure the grip strength. So the comparison of these devices is required to understand if FR is similar when measured with both devices. Methods: Fifty-four (29 female and 25 male; mean age: 39.98 ± 18.09) community-dwelling people were tested for muscle function. The Fatigue resistance (FR), which is the time during that grip strength drops to 50% of its maximum, was recorded with each device and simultaneous sEMG of the forearm muscles was obtained. The (co-)activation of agonist and antagonist muscles was calculated and compared with the differences between the performances with each device (controlling for gender and age). Results: FR was significantly better when measured with VM compared to JD. At all phases of the FR-test the antagonist muscle co-activation was significantly higher for VM compared to JD. In contrast, the agonist muscle activation level was significantly higher in JD compared to VM. When performing the FR-test with VM, both the agonist muscle activation and antagonist muscle co-activation decreased significantly (p<0.05). Whereas when using the JD, only a significant decrease in the antagonist muscle co-activation was observed. The difference in antagonist muscle activation between VM and JD was significantly related to the difference in FR between both devices. Conclusion: The results suggest that the FR-test when using the VM induces a more prominent muscle exhaustion than when using the JD, which makes the VM more suitable for measuring muscle fatigue resistance. However, these findings must be confirmed in a larger study population.

Mapeando fundamentos do Constructo Neuromarketing com profissionais de empresa de publicidade

This study aims to acknowledge the domain level and influence of the neuromarketing construct. This is done considering professionals at advertising agencies in Brazil. The presence of concepts related to this new approach is very little divulged, and there are little analysis performed on this area. Thus, the research is of qualitative and exploratory nature and used as primary fonts books, articles related to marketing, neuroscience, and psychology as well as secondary fonts. A profound interview was realized aiming the main advertising agencies in Brazil. The public was composed by managers responsible for planning. A content analysis was performed afterwards. The advances related to the brain science have permitted the development of technological innovation. These go primarily towards knowledge and unconscious experiences of consumers, which are responsible for the impulse of decision making and consumer behavior. These issues are related to Neuromarketing, that in turn, uses techniques such as FMRI, PET and FDOT. These scan the consumer s brain and produces imagines on the neuron s structures and functioning. This is seen while activities such as mental tasks for the visualization of brands, images or products, watching videos and commercials are performed. It is observed that the agencies are constantly in search of new technologies and are aware of the limitations of the current research instruments. On the other hand, they are not totally familiar with concepts related to neuromarketing. In relation to the neuroimage techniques it is pointed out by the research that there is full unawareness, but some agencies seem to visualize positive impacts with the use of these techniques for the evaluation of films and in ways that permit to know the consumer better. It is also seen that neuroimage is perceived as a technique amongst others, but its application is not real, there are some barriers in the market and in the agencies itself. These barriers as well as some questioning allied to the scarce knowledge of neuromarketing, make it not possible to be put into practice in the advertising market. It is also observed that even though there is greater use of neuromarketing; there would not be any meaningful changes in functioning and structuring of these agencies. The use of the neuro-image machines should be done in research institutes and centers of big companies. Results show that the level of domain of the neuromarketing construct in the Brazilian advertising agencies is only a theoretical one. Little is known of this subject and the neurological studies and absolutely nothing of neuroimage techniques

Avaliação do estresse oxidativo induzido por superfícies de titânio

Commercially pure Titanium (cp Ti) is a material largely used in orthopedic and dental implants due to its biocompatibility properties. Changes in the surface of cp Ti can determine the functional response of the cells such as facilitating implant fixation and stabilization, and increased roughness of the surface has been shown to improve adhesion and cellular proliferation. Various surface modification methods have been developed to increase roughness, such as mechanical, chemical, electrochemical and plasma treatment. An argon plasma treatment generates a surface that has good mechanical proprieties without chemical composition modification. Besides the topography, biological responses to the implant contribute significantly to its success. Oxidative stress induced by the biomaterials is considered one of the major causes of implant failure. For this reason the oxidative potential of titanium surfaces subjected to plasma treatment was evaluated on this work. CHO-k1 cells were cultivated on smooth or roughed Ti disks, and after three days, the redox balance was investigated measuring reactive oxygen species (ROS) generation, total antioxidant capacity and biomarkers of ROS attack. The results showed cells grown on titanium surfaces are subjected to intracellular oxidative stress due to hydrogen peroxide generation. Titanium discs subjected to the plasma treatment induced less oxidative stress than the untreated ones, which resulted in improved cellular ability. Our data suggest that plasma treated titanium may be a more biocompatible biomaterial.

Os efeitos das reclamações online na lealdade dos consumidores: um estudo experimental

In an environment of constant change, technological developments, market competition and more informed consumers, the search for a lasting relationship through the conquest of loyalty has become the objective of companies. However, several authors suggest that this loyalty can be affected by negative comments available on the internet. Therefore, this dissertation has as objective to examine if the complaints are available on the internet impact the loyalty to a brand of mobile phone. The research used as the basis the Expanded NCSB model suggest by Johnson et al. (2001), studying five prominent drives of loyalty: image/brand reputation, affective commitment, calculative commitment, perceived value and trust, beyond the satisfaction construct as moderator variable. The research method adopted was the experimental design which included 285 undergraduate students, with the trial which included 285 undergraduate students, with the field study of the mobile industry, specifically, the brands of cell phones. The research approach was quantitative and methods were descriptive statistics, factor analysis, cluster analysis, linear regression and non-parametric test of Wilcoxon for data analysis. Of the 16 hypothesis stemmed from the research model proposed, 12 were confirmed. The results showed that the complaint available on the internet, here represented by the available on the site Reclame Aqui, may impact consumer perceptions about brand loyalty, as well as its antecedents, being that these complaints can affect all the consumers, regardless of historical satisfaction with the brand. It also noted the positive relationship between the independent variables trust, image/brand reputation, perceived value, affective commitment and calculative commitment and the dependent variable - loyalty, even when considering the data obtained after exposure to the complaint. However, no unanimous conclusion that the relationship between these variables was strongest in the group with satisfactory experience. At the first moment of the research, the trust was the most important variable for the formation of loyalty. However, after exposure to treatment, the image/brand reputation, was more relevant. Contributions of the study, limitations and recommendations for future researches are approached in the present investigation

Análise da estabilidade genética de células-tronco mesenquimais humanas

Human multipotent mesenchymal stromal cells (MSCs), also known as mesenchymal stem cells, have become an important and attractive therapeutic tool since they are easily isolated and cultured, have in vitro expansion potential, substantial plasticity and secrete bioactive molecules that exert trophic effects. The human umbilical cord as a cell source for cell therapy will help to avoid several ethical, political, religious and technical issues. One of the main issues with SC lines from different sources, mainly those of embryonic origin, is the possibility of chromosomal alterations and genomic instability during in vitro expansion. Cells isolated from one umbilical cord exhibited a rare balanced paracentric inversion, likely a cytogenetic constitutional alteration, karyotype: 46,XY,inv(3)(p13p25~26). Important genes related to cancer predisposition and others involved in DNA repair are located in 3p25~26. Titanium is an excellent biomaterial for bone-implant integration; however, the use can result in the generation of particulate debris that can accumulate in the tissues adjacent to the prosthesis, in the local bone marrow, in the lymph nodes, liver and spleen. Subsequently may elicit important biological responses that aren´t well studied. In this work, we have studied the genetic stability of MSC isolated from the umbilical cord vein during in vitro expansion, after the cryopreservation, and under different concentrations and time of exposition to titanium microparticles. Cells were isolated, in vitro expanded, demonstrated capacity for osteogenic, adipogenic and chondrogenic differentiation and were evaluated using flow cytometry, so they met the minimum requirements for characterization as MSCs. The cells were expanded under different concentrations and time of exposition to titanium microparticles. The genetic stability of MSCs was assessed by cytogenetic analysis, fluorescence in situ hybridization (FISH) and analysis of micronucleus and other nuclear alterations (CBMN). The cells were able to internalize the titanium microparticles, but MSCs preserve their morphology, differentiation capacity and surface marker expression profiles. Furthermore, there was an increase in the genomic instability after long time of in vitro expansion, and this instability was greater when cells were exposed to high doses of titanium microparticles that induced oxidative stress. It is necessary always assess the risks/ benefits of using titanium in tissue therapy involving MSCs, considering the biosafety of the use of bone regeneration using titanium and MSCs. Even without using titanium, it is important that the therapeutic use of such cells is based on analyzes that ensure quality, security and cellular stability, with the standardization of quality control programs appropriate. In conclusion, it is suggested that cytogenetic analysis, FISH analysis and the micronucleus and other nuclear alterations are carried out in CTMH before implanting in a patient

Estudo e desenvolvimento de um capacitor eletrolítico de nióbio

It seeks to find an alternative to the current tantalum electrolytic capacitors in the market due to its high cost. Niobium is a potential substitute, since both belong to the same group of the periodic table and because of this have many similar physical and chemical properties. Niobium has several technologically important applications, and Brazil has the largest reserves, around 96%. There are including niobium in reserves of tantalite and columbite in Rio Grande do Norte. These electrolytic capacitors have high capacitance specifies, ie they can store high energy in small volumes compared to other types of capacitors. This is the main attraction of this type of capacitor because is growing demand in the production of capacitors with capacitance specifies increasingly high, this because of the miniaturization of various devices such as GPS devices, televisions, computers, phones and many others. The production route of the capacitor was made by powder metallurgy. The initial niobium powder supplied by EEL-USP was first characterized by XRD, SEM, XRF and laser particle size, to then be sieved into three particle size, 200, 400 e 635mesh. The powders were then compacted and sintered at 1350, 1450 and 1550°C using two sintering time 30 and 60min. Sintering is one of the most important parts of the process as it affects properties as porosity and surface cleaning of the samples, which greatly affected the quality of the capacitor. The sintered samples then underwent a process of anodic oxidation, which created a thin film of niobium pentóxido over the whole porous surface of the sample, this film is the dielectric capacitor. The oxidation process variables influence the performance of the film and therefore the capacitor. The samples were characterized by electrical measurements of capacitance, loss factor, ESR, relative density, porosity and surface area. After the characterizations was made an annealing in air ate 260ºC for 60min. After this treatment were made again the electrical measurements. The particle size of powders and sintering affected the porosity and in turn the specific area of the samples. The larger de area of the capacitor, greater is the capacitance. The powder showed the highest capacitance was with the smallest particle size. Higher temperatures and times of sintering caused samples with smaller surface area, but on the other hand the cleaning surface impurities was higher for this cases. So a balance must be made between the gain that is achieved with the cleaning of impurities and the loss with the decreased in specific area. The best results were obtained for the temperature of 1450ºC/60min. The influence of annealing on the loss factor and ESR did not follow a well-defined pattern, because their values increased in some cases and decreased in others. The most interesting results due to heat treatment were with respect to capacitance, which showed an increase for all samples after treatment

Diseño de un plan estratégico de gestión financiera para la autosostenibilidad de la Asociación promotora de la Organización de Discapacitados de El Salvador (PODES).

En los últimos años las ONG’s o entidades sin fines de lucro han adquirido un protagonismo creciente en el campo del desarrollo social y en la búsqueda de respuestas innovadoras a los desafíos que enfrentan las sociedades contemporáneas. Estas entidades juegan un papel central en la defensa de los derechos y la participación de la ciudadanía en la esfera pública. A su vez, realizan un trabajo significativo en la satisfacción de necesidades básicas y servicios como educación, salud, asistencia social, empleo, vivienda, cultura, promoción de derechos humanos, o el apoyo a grupos vulnerables. La Asociación Promotora de la Organización de Discapacitados de El Salvador se dedica a la elaboración de prótesis, órtesis y otros aparatos ortopédicos, con el objetivo de beneficiar a personas de escasos recursos económicos y afiliados a instituciones públicas, privadas u ONG´s orientadas a la atención de este sector. A pesar de las limitaciones con las que cuenta la Asociación desempeña una labor importante como fuente de ayuda a la inserción laboral y la vida social de las personas con discapacidad. Sin embargo, la Asociación no cuenta con los suficientes Recursos Financieros para poder realizar las diferentes actividades y proyectos, cuenta únicamente con el aporte monetario de Medico Internacional, asimismo los ingresos recibidos por las ventas mediante licitaciones, alianzas, convenios y aquellas generadas por referencias de los pacientes. Es por está razón que surge la necesidad de Diseñar un Plan de Gestión Financiera que contribuya a la Autosostenibilidad de la Asociación PODES. Para ello se realizó un diagnóstico Interno para identificar la situación en la que se encuentra la Asociación. En la realización de la investigación y recolección de la información se utilizó el Método Científico, aplicándose el método deductivo y el tipo de diseño aplicado en la investigación fue descriptivo. Consecuentemente las técnicas y herramientas utilizadas en la recolección de datos fueron: la entrevista y la encuesta. Posteriormente se realizó la tabulación y análisis de los datos utilizando el procesamiento de la información a través de tablas y gráficas de presentación de resultados. El diagnóstico cualitativo estratégico fue realizado por áreas de gestión y fuente de investigación con el objetivo de brindar un mayor entendimiento de los factores claves que inciden en la situación actual. El diagnóstico financiero fue realizado por medio de los siguientes análisis: tendencias absolutas, tendencias con año base, ratios o razones financieras y porcentualidades. En base al análisis de resultados se llegó a las siguientes conclusiones significativas: La Asociación no cuenta con una gestión eficiente, ni con planes estratégicos para la ejecución de lo proyectado, la dirección y control son ejercidas de manera subjetiva, carece de publicidad y promoción, sin embargo entre sus fortalezas se encuentran la alta calidad del producto, las amplias instalaciones y la maquinaria. De acuerdo a lo anterior, se diseñó una propuesta de plan estratégico de gestión financiera el cual incluye un sistema presupuestario, políticas, estrategias financieras y herramientas de control financiero a fin de obtener resultados positivos. Las actividades y recursos se detallan mediante el cronograma que servirá de guía para la implementación de dicho plan.

Necessidade e procura do tratamento ortodôntico na consulta da clínica universitária do ISCSEM

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Prostaglandinas e o movimento dentário

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Análise comparativa da eficácia mastigatória entre doentes portadores de PPR acrílica e esquelética

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz

Eficácia dos sistemas de impressão digital vs impressões convencionais na medicina dentária

Dissertação para obtenção do grau de Mestre no Instituto Superior de Ciências da Saúde Egas Moniz