Síntesis de nanopartículas de Ag y nanocristales de Sb producidos mediante ablación por láser pulsado en un medio líquido (PLALM).

Tesis (Maestría en Ciencias de la Ingeniería Mecánica con Especialidad en Materiales) UANL, 2011.

Additions nucléophiles sur des B[beta]-alkoxyaldéhydes a[alpha],a[alpha]-disubstitués formés par une réaction radicalaire de transfert de vinyle intramoléculaire

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

Additions stéréosélectives sur des imines : accès aux amines hétérocycliques a[alpha]-chirales

Mémoire numérisé par la Division de la gestion de documents et des archives de l'Université de Montréal

La bioaccumulation d’une nanoparticule d’argent (nAg) par l’algue verte Chlamydomonas reinhardtii : distinguer la contribution de la particule de celle de l’ion Ag+

L’explosion de la nanotechnologie a permis l’intégration d’une multitude de nanoparticules dans des produits de consommation. Les nanoparticules d’argent (nAg) sont les plus utilisées à ces fins, selon les derniers recensements disponibles. La plupart des études toxicologiques, à ce jour, ont fait état de l’implication très évidente de l’ion Ag+ dans la toxicité aigüe des nAg; cependant, quelques études ont mis en évidence des effets toxicologiques dus aux nAg. Il y a un certain consensus à propos d’un risque de contamination des eaux douces via leur rejet par les effluents des réseaux d’aqueducs. Puisque les concentrations en Ag+ sont généralement très faibles dans les eaux douces (de l’ordre du pg L-1), de par la formation de complexes non-labiles avec des thiols (organiques et inorganiques) et des sulfures, la toxicité inhérente aux nAg pourrait ne pas être négligeable- comparativement aux tests en laboratoires. Cette étude s’intéressait donc aux mécanismes de bioaccumulation d’argent par l’algue verte C. reinhardtii suite à l’exposition à des nAg de 5 nm (enrobage d’acide polyacrylique). La bioaccumulation d’argent pour l’exposition à Ag+ servait de point de comparaison; également, les abondances de l’ARNm de l’isocitrate lyase 1 (ICL1) et de l’ARNm de Copper Transporter 2 (CTR2) étaient mesurées comme témoins biologiques de la bioaccumulation de Ag+. Les expériences ont été menées en présence d’un tampon organique (NaHEPES, 2 x 10-2 M; Ca2+, 5x 10-5 M) à pH de 7,00. Pour des expositions à temps fixe de 2 heures, la bioaccumulation d’argent pour nAg était supérieure à ce qui était prédit par sa concentration initiale en Ag+; cependant, il n’y avait pas de différence d’abondance des ARNm de ICL1 et de CTR2 entre nAg et Ag+. D’un autre côté, pour une exposition à temps variables, la bioaccumulation d’argent pour nAg était supérieure à ce qui était prédit par sa concentration initiale en Ag+ et une augmentation de l’abondance de l’ARNm de ICL1 était notée pour nAg. Cependant, il n’y avait aucune différence significative au niveau de l’abondance de l’ARNm de CTR2 entre nAg et une solution équivalente en Ag+. L’ajout d’un fort ligand organique (L-Cystéine; log K= 11,5) à une solution de nAg en diminuait radicalement la bioaccumulation d’argent par rapport à nAg-sans ajout de ligand. Par contre, l’abondance des ARNm de ICL1 et de CTR2 étaient stimulées significativement par rapport à une solution contrôle non-exposée à nAg, ni à Ag+. Les résultats suggéraient fortement que les nAg généraient des ions Ag+ au contact de C. reinhardtii.

Influvence of Alloying Additions on the Structure and Properties of Ai-7Si-0.3Mg Alloy

Cast Ai-Si alloys are widely used in the automotive, aerospace and general engineering industries due to their excellent combination of properties such as good castability, low coefficient of thermal expansion, high strength-to-weight ratio and good corrosion resistance. The present investigation is on the influence of alloying additions on the structure and properties of Ai-7Si-0.3Mg alloy. The primary objective of this present investigation is to study these beneficial effects of calcium on the structure and properties of Ai-7Si-0.3Mg-xFe alloys. The second objective of this work is to study the effects of Mn,Be and Sr addition as Fe neutralizers and also to study the interaction of Mn,Be,Sr and Ca in Ai-7Si-0.3Mg-xFe alloys. In this study the duel beneficial effects of Ca viz;modification and Fe-neutralization, comparison of the effects of Ca and Sr with common Fe neutralizers. The casting have been characterized with respect to their microstructure, %porosity and electrical conductivity, solidification behaviour and mechanical properties. One of the interesting observations in the present work is that a low level of calcium reduces the porosity compared to the untreated alloy. However higher level of calcium addition lead to higher porosity in the casting. An empirical analysis carried out for comparing the results of the present work with those of the other researchers on the effect of increasing iron content on UTS and % elongation of Ai-Si-Mg and Ai-Si-Cu alloys has shown a linear and an inverse first order polynomial relationships respectively.

Laser-induced thermal characterization of nano Ag metal dispersed ceramic alumina matrix

In this paper, we report the measurements of thermal diffusivity of nano Ag metal dispersed ceramic alumina matrix sintered at different temperatures using laser induced non-destructive photoacoustic technique. Measurements of thermal diffusivity also have been carried out on specimens with various concentration of nano metal. Analysis of the data is done on the basis of one-dimensional model of Rosencwaig and Gersho. The present measurements on the thermal diffusivity of nano metal dispersed ceramic alumina shows that porosity has a great influence on the heat transport and the thermal diffusivity value. The present analysis also shows that the inclusion of nano metal into ceramic matrix increases its interconnectivity and hence the thermal diffusivity value. The present study on the samples sintered at different temperature shows that the porosity of the ceramics varies considerably with the change in sintering temperature. The results are interpreted in terms of phonon assisted heat transfer mechanism and the exclusion of pores with the increase in sintering temperature.

Laser-induced thermal characterization of nano Ag metal dispersed ceramic alumina matrix

In this paper, we report the measurements of thermal diffusivity of nano Ag metal dispersed ceramic alumina matrix sintered at different temperatures using laser induced non-destructive photoacoustic technique. Measurements of thermal diffusivity also have been carried out on specimens with various concentration of nano metal. Analysis of the data is done on the basis of one-dimensional model of Rosencwaig and Gersho. The present measurements on the thermal diffusivity of nano metal dispersed ceramic alumina shows that porosity has a great influence on the heat transport and the thermal diffusivity value. The present analysis also shows that the inclusion of nano metal into ceramic matrix increases its interconnectivity and hence the thermal diffusivity value. The present study on the samples sintered at different temperature shows that the porosity of the ceramics varies considerably with the change in sintering temperature. The results are interpreted in terms of phonon assisted heat transfer mechanism and the exclusion of pores with the increase in sintering temperature

Laser-induced thermal characterization of nano Ag metal dispersed ceramic alumina matrix

In this paper, we report the measurements of thermal diffusivity of nano Ag metal dispersed ceramic alumina matrix sintered at different temperatures using laser induced non-destructive photoacoustic technique. Measurements of thermal diffusivity also have been carried out on specimens with various concentration of nano metal. Analysis of the data is done on the basis of one-dimensional model of Rosencwaig and Gersho. The present measurements on the thermal diffusivity of nano metal dispersed ceramic alumina shows that porosity has a great influence on the heat transport and the thermal diffusivity value. The present analysis also shows that the inclusion of nano metal into ceramic matrix increases its interconnectivity and hence the thermal diffusivity value. The present study on the samples sintered at different temperature shows that the porosity of the ceramics varies considerably with the change in sintering temperature. The results are interpreted in terms of phonon assisted heat transfer mechanism and the exclusion of pores with the increase in sintering temperature

Studies on grain refinement and alloying additions on the microstructure and mechanical properties of Mg-8Zn-4Al alloy

MAGNESIUM ALLOYS have strong potential for weight reduction in a wide range of technical applications because of their low density compared to other structural metallic materials. Therefore, an extensive growth of magnesium alloys usage in the automobile sector is expected in the coming years to enhance the fuel efficiency through mass reduction. The drawback associated with the use of commercially cheaper Mg-Al based alloys, such as AZ91, AM60 and AM50 are their inferior creep properties above 100ºC due to the presence of discontinuous Mg17A112 phases at the grain boundaries. Although rare earth-based magnesium alloys show better mechanical properties, it is not economically viable to use these alloys in auto industries. Recently, many new Mg-Al based alloy systems have been developed for high temperature applications, which do not contain the Mg17Al12 phase. It has been proved that the addition of a high percentage of zinc (which depends upon the percentage of Al) to binary Mg-Al alloys also ensures the complete removal of the Mg17Al12 phase and hence exhibits superior high temperature properties.ZA84 alloy is one such system, which has 8%Zn in it (Mg-8Zn-4Al-0.2Mn, all are in wt %) and shows superior creep resistance compared to AZ and AM series alloys. These alloys are mostly used in die casting industries. However, there are certain large and heavy components, made up of this alloy by sand castings that show lower mechanical properties because of their coarse microstructure. Moreover, further improvement in their high temperature behaviour through microstructural modification is also an essential task to make this alloy suitable for the replacement of high strength aluminium alloys used in automobile industry. Grain refinement is an effective way to improve the tensile behaviour of engineering alloys. In fact, grain refinement of Mg-Al based alloys is well documented in literature. However, there is no grain refiner commercially available in the market for Mg-Al alloys. It is also reported in the literature that the microstructure of AZ91 alloy is modified through the minor elemental additions such as Sb, Si, Sr, Ca, etc., which enhance its high temperature properties because of the formation of new stable intermetallics. The same strategy can be used with the ZA84 alloy system to improve its high temperature properties further without sacrificing the other properties. The primary objective of the present research work, “Studies on grain refinement and alloying additions on the microstructure and mechanical properties of Mg-8Zn-4Al alloy” is twofold: 1. To investigate the role of individual and combined additions of Sb and Ca on the microstructure and mechanical properties of ZA84 alloy. 2. To synthesis a novel Mg-1wt%Al4C3 master alloy for grain refinement of ZA84 alloy and investigate its effects on mechanical properties.