Semiconductor photocatalysis: an environmentally acceptable alternative production technique and effluent treatment process

New environmentally acceptable production methods are required to help reduce the environmental impact of many industrial processes. One potential route is the application of photocatalysis using semiconductors. This technique has enabled new environmentally acceptable synthetic routes for organic synthesis which do not require the use of toxic metals as redox reagents. These photocatalysts also have more favourable redox potentials than many traditional reagents. Semiconductor photocatalysis can also be applied to the treatment of polluted effluent or for the destruction of undesirable by-products of reactions. In addition to the clean nature of the process the power requirements of the technique can be relatively low, with some reactions requiring only sunlight. 

Influence of phosphate addition on the arsenic uptake by wheat (Triticum Durum) grown in arsenic polluted soils

Arsenic (As) uptake and distribution in the roots, shoots, and grain of wheat (Triticum durum) grown in 2 As polluted soils (192 and 304 mg kg ^-1 respectively), and an uncontaminated soil (14 mg kg^-1 ), collected from Scarlino plain (Tuscany, Italy), was investigated with respect with phosphorus fertilization. Three different level of phosphorus (P) fertilization: PO [0 kg ha^-1], Pl [75 kg ha^-1], and P2 [150 kg ha^-1], as KH₂PO₄ of P, were applied. The presence of high concentrations of As in soils reduced plants growth, decreased grain yield and increased root, shoot and grain As concentrations, especially in the absence of P fertilization. The P fertilization decreased the As concentration in all the tissues as well as the translocation of As to the shoot and grain. This observation may be useful in certain areas of the world with high levels of As in soils, to reduce the potential risk posed to human health by As entering the food-chain. © by PSP.

Influence of trace substances on methanation catalysts used in dynamic biogas upgrading

The aim of this work was to study the possible deactivation effects of biogas trace ammonia concentrations on methanation catalysts. It was found that small amounts of ammonia led to a slight decrease in the catalyst activity. A decrease in the catalyst deactivation by carbon formation was also observed, with ammonia absorbed on the active catalyst sites. This was via a suppression of the carbon formation and deposition on the catalyst, since it requires a higher number of active sites than for the methanation of carbon oxides. From the paper findings, no special pretreatment for ammonia removal from the biogas fed to a methanation process is required.

Gestão de resíduos para uma construção sustentável

Os resíduos sólidos (RS) têm vindo a aumentar em quantidade e diversidade nas últimas décadas em todo o mundo, em resultado da explosão demográfica, do crescimento económico e do aumento da construção, acentuando-se também a produção de resíduos perigosos. Por estas mesmas razões têm surgido limitações do espaço disponível para deposição final de RS. A prática atual no sector da construção pode ser alterada através da introdução de uma gestão eficiente, optimizadora de custos, com a produção de menos resíduos produzidos e também através da implementação de medidas preventivas de produção de resíduos nas obras. Pretende-se, no âmbito deste trabalho, abordar a problemática da gestão de resíduos de construção em obra e contribuir para alterar a situação descrita, apresentando e validando ferramentas a utilizar na gestão de RS. O principal objetivo do trabalho é avaliar os impactes ambientais associados à gestão dos resíduos produzidos na obra na fase de construção. Nas obras em estudo foi recolhida informação sobre os resíduos (quantidades e tipologia) e analisada, tratada com a finalidade de criar uma ferramenta indispensável na gestão de resíduos de construção e compilado o inventário dos resíduos. Após esta compilação, procedeu-se à avaliação dos impactes. A aplicação da ferramenta de avaliação de ciclo de vida permitem avaliar o impacte das decisões na sustentabilidade da construção, nomeadamente no que diz respeito à geração de resíduos.

Sustainability study of the application of geosynthetic clay liners in hostile and aggressive environments

This paper discusses the sustainable performance of geosynthetic clay liners (GCLs) which are popularly specified as “leachate retaining” or as “water proofing” membranes in the geo-environmental construction industry. Geosynthetic clay liners (GCLs) are composite matting comprising of bentonite clay with two covering geosynthetics. These are innovative labour saving construction material, developed over the last three decades. The paper outlines the variety of Geosynthetic Clay Liners (GCLs) can be classified essentially into two distinctly different forms viz; (a) air dry (< 8% m/c) with granular or powdered bentonite or (b) bentonite cake factory prehydrated to a moisture content (~40% m/c) beyond its shrinkage limit and vacuum extruded as a clay cake to enhance its sustainable performance. The dominant mineral in bentonite clay is the three-layered (2:1) clay mineral montmorillonite. High quality bentonites need to be used in the GCL manufacture. Sodium montmorillonite has the desired characteristic of high swelling capacity, high cation exchange capacity and the consequently very low hydraulic conductivity, providing the basis for the hydraulic sealing medium in GCLs. These encapsulate the active montmorillonite clay minerals which depend on the water and chemical balance between the sealing element and the surrounding geo environment. Quantitative mineralogical analyses and an assessment of the adsorbed cation regime, diffusion coefficients and clay leachate compatibility must necessarily be an integral part of the site appraisal to ensure acceptable long term sustainability and performance. Factors influencing the desired performance of bentonite in the GCLs placed in difficult construction and hostile chemical environments are discussed in this paper. Accordingly, the performance specifications for GCLs are identified and the appropriateness of enhancing the cation exchange capacity with polymer treatment and the need for factory prehydration of the untreated sodium bentonite is emphasised. The advantage of factory prehydrating the polymer treated bentonite to fluid content beyond its shrinkage limit and subsequently factory processing it to develop laminated clay is to develop a GCL that has enviable sealing characteristics with a greater resistance to geochemical attack and cracking. Since clay liners are buried in the ground as base liners, capping layer or as structural water proofing membrane, they can easily avoid strict quality and performance monitoring being “out of sight, out of mind!”. It is very necessary that barrier design for leachate containment must necessarily be in accordance with legislative requirement Assessment of long term hydraulic conductivities and clay-leachate compatibility assessment is deemed necessary. The derogatory factors affecting the sustainable performance of the bentonite in GCLs placed in difficult construction and hostile chemical environments are discussed. Sustainability concepts incorporated in waste management practice must aim to achieve 100% recycling and fully implement the handling of solid waste in developing countries with relatively lower labour costs.

Environmental affairs enforcement report

This is a list of actions taken against businesses that are not in compliance with environmental regulations including underground storage tanks, hazardous waste, drinking water, water pollution and solid waste. It is broken down by enforcement by various divisions of DHEC including the Bureau of Land and Waste Management, Bureau of Water, Bureau of Air Quality, Bureau of Environmental Health Services and Division of Ocean and Coastal Resource Management.

Environmental affairs enforcement report

This is a list of actions taken against businesses that are not in compliance with environmental regulations including underground storage tanks, hazardous waste, drinking water, water pollution and solid waste. It is broken down by enforcement by various divisions of DHEC including the Bureau of Land and Waste Management, Bureau of Water, Bureau of Air Quality, Bureau of Environmental Health Services and Division of Ocean and Coastal Resource Management.

Gaseificação de resíduos: uma alternativa de gestão de resíduos sólidos urbanos na Região Autónoma dos Açores

Dissertação de Mestrado, Ambiente, Saúde e Segurança, 18 de Fevereiro de 2011, Universidade dos Açores.

An integrated recycling approach for GFRP pultrusion wastes: recycling and reuse assessment into new composite materials using Fuzzy Boolean Nets

In this study, efforts were made in order to put forward an integrated recycling approach for the thermoset based glass fibre reinforced polymer (GPRP) rejects derived from the pultrusion manufacturing industry. Both the recycling process and the development of a new cost-effective end-use application for the recyclates were considered. For this purpose, i) among the several available recycling techniques for thermoset based composite materials, the most suitable one for the envisaged application was selected (mechanical recycling); and ii) an experimental work was carried out in order to assess the added-value of the obtained recyclates as aggregates and reinforcement replacements into concrete-polymer composite materials. Potential recycling solution was assessed by mechanical behaviour of resultant GFRP waste modified concrete-polymer composites with regard to unmodified materials. In the mix design process of the new GFRP waste based composite material, the recyclate content and size grade, and the effect of the incorporation of an adhesion promoter were considered as material factors and systematically tested between reasonable ranges. The optimization process of the modified formulations was supported by the Fuzzy Boolean Nets methodology, which allowed finding the best balance between material parameters that maximizes both flexural and compressive strengths of final composite. Comparing to related end-use applications of GFRP wastes in cementitious based concrete materials, the proposed solution overcome some of the problems found, namely the possible incompatibilities arisen from alkalis-silica reaction and the decrease in the mechanical properties due to high water-cement ratio required to achieve the desirable workability. Obtained results were very promising towards a global cost-effective waste management solution for GFRP industrial wastes and end-of-life products that will lead to a more sustainable composite materials industry.

Análise do sistema de tratamento de efluentes gasosos de uma central de valorização energética de resíduos sólidos urbanos

Trabalho Final de Mestrado para obtenção do grau de Mestre Em Engenharia Química e Biológica Ramo de processos Químicos

Moradia no centro histórico do Montijo: reabilitação vs construção nova

Dissertação para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Edificações

Caracterização laboratorial de misturas betuminosas com incorporação de agregado siderúrgico inerte para construção (ASIC)

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil na Área de Especialização de Vias de Comunicação e Transportes

Contribuição para o estudo dos subprodutos de uma ETAR: gradados e areias

Trabalho Final de Mestrado para obtenção do grau de Mestre em Engenharia Civil, na Área de Especialização de Hidráulica

A gestão dos resíduos hospitalares e o papel da autoridade de saúde : caso do concelho da Amad

RESUMO O Problema. A natureza, diversidade e perigosidade dos resíduos hospitalares (RH) exige procedimentos específicos na sua gestão. A sua produção depende do número de unidades de prestação de cuidados de saúde (upcs), tipo de cuidados prestados, número de doentes observados, práticas dos profissionais e dos órgãos de gestão das upcs, inovação tecnológica, entre outros. A gestão integrada de RH tem evoluído qualitativamente nos últimos anos. Existe uma carência de informação sobre os quantitativos de RH produzidos nas upcs e na prestação de cuidados domiciliários, em Portugal. Por outro lado, os Serviços de Saúde Pública, abrangendo o poder de Autoridade de Saúde, intervêm na gestão do risco para a saúde e o ambiente associado à produção de RH, necessitando de indicadores para a sua monitorização. O quadro legal de um país nesta matéria estabelece a estratégia de gestão destes resíduos, a qual é condicionada pela classificação e definição de RH por si adoptadas. Objectivos e Metodologias. O presente estudo pretende: quantificar a produção de RH resultantes da prestação de cuidados de saúde, em seres humanos e animais nas upcs, do sistema público e privado, desenvolvendo um estudo longitudinal, onde se quantifica esta produção nos Hospitais, Centros de Saúde, Clínicas Médicas e Dentárias, Lares para Idosos, Postos Médicos de Empresas, Centros de Hemodiálise e Clínicas Veterinárias do Concelho da Amadora, e se compara esta produção em dois anos consecutivos; analisar as consequências do exercício do poder de Autoridade de Saúde na gestão integrada de RH pelas upcs; quantificar a produção média de RH, por acto prestado, nos cuidados domiciliários e, com um estudo analítico transversal, relacionar essa produção média com as características dos doentes e dos tratamentos efectuados; proceder à análise comparativa das definições e classificações de RH em países da União Europeia, através de um estudo de revisão da legislação nesta matéria em quatro países, incluindo Portugal. Resultados e Conclusões. Obtém-se a produção média de RH, por Grupos I+II, III e IV: nos Hospitais, por cama.dia, considerando a taxa de ocupação; por consulta, nos Centros de Saúde, Clínicas Médicas e Dentárias e Postos Médicos de Empresas; por cama.ano, nos Lares para Idosos, considerando a sua taxa de ocupação; e por ano, nas Clínicas de Hemodiálise e Veterinárias. Verifica-se que a actuação da Autoridade de Saúde, produz nas upcs uma diferença estatisticamente significativa no aumento das contratualizações destas com os operadores de tratamento de RH. Quantifica-se o peso médio de resíduos dos Grupos III e IV produzido por acto prestado nos tratamentos domiciliários e relaciona-se esta variável dependente com as características dos doentes e dos tratamentos efectuados. Comparam-se os distintos critérios utilizados na elaboração das definições e classificações destes resíduos inscritas na legislação da Alemanha, Reino Unido, Espanha e Portugal. Recomendações. Apresentam-se linhas de investigação futura e propõe-se uma reflexão sobre eventuais alterações de aspectos específicos no quadro legal português e nos planos de gestão integrada de RH, em Portugal. ABSTRACT The problem: The nature, diversity and hazardousness of hospital wastes (HW) requires specific procedures in its management. Its production depends on the number and patterns of healthcare services, number of patients, professional and administration practices and technologic innovations, among others. Integrated management of HW has been developping, in the scope of quality, for the past few years. There is a lack of information about the amount of HW produced in healthcare units and in the domiciliary visits, in Portugal. On the other hand, the Public Health Services, embracing the Health Authority’s power, play a very important role in managing the risk of HW production to public and environmental health. They need to use some indicators in its monitorization. In a country, rules and regulations define hospital waste management policies, which are confined by the addopted classification and definition of HW. Goals and Methods: This research study aims to quantify the production of HW as a result of healthcare services in human beings and animals, public service and private one. Through a longitudinal study, this production is quantified in Hospitals, Health Centers, Medical and Dental Clinics, Residential Centers for old people, Companies Medical Centers and Veterinary and Haemodyalisis Clinics in Amadora’s Council, comparing this production in two consecutive years. This study also focus the consequences of the Health Authority’s role in the healthcare services integrated management of HW. The middle production of HW in the domiciliary treatments is also quantified and, with a transversal analytic study, its association with patients and treatments’ characteristics is enhanced. Finally, the definitions and classifications in the European Union Countries are compared through a study that revises this matter’s legislation in four countries, including Portugal. Results and Conclusions: We get the middle production of Groups I+II, III and IV: HW: in Hospitals, by bed.day, bearing the occupation rate; by consultation, in Health Centers, Medical and Dental Clinics and Companies Medical Centers; by bed.year in Residential Centers for old people, considering their occupation rate; by year, in Veterinary and Haemodyalisis Clinics. We verify that the Health Authority’s role produces a significative statistical difference in the rise of the contracts between healthcare services and HW operators. We quantify the Groups III and IV’s wastes middle weight, produced by each medical treatment in domiciliary visits and relate this dependent variable with patients and treatments’ characteristics. We compare the different criteria used in the making of definitions and classifications of these wastes registered in German, United Kingdom, Spain and Portugal’s laws. Recommendations: Lines of further investigation are explaned. We also tender a reflexion about potential changes in rules, in regulations and in the integrated plans for managing hospital wastes in Portugal. RÉSUMÉ Le Problème. La gestion des déchets d'activités hospitalières (DAH) et de soins de santé (DSS) exige des procédures spécifiques en raison de leur nature, diversité et dangerosité. Leur production dépend, parmi d’autres, du nombre d’unités de soins de santé (USS), du type de soins administrés, du nombre de malades observés, des pratiques des professionnels et des organes de gestion des USS, de l’innovation technologique. La gestion intégrée des DAH et des DSS subit une évolution qualitative dans les dernières années. Il existe un déficit d’information sur les quantitatifs de DAH et de DSS provenant des USS et de la prestation de soins domiciliaires, au Portugal. D’autre part les Services de Santé Publique, y compris le pouvoir de l’Autorité de Santé, qui interviennent dans la gestion du risque pour la santé et pour l’environnement associé à la production de DAH et de DSS, ont besoin d’indicateurs pour leur surveillance. Dans cette matière le cadre légal établit la stratégie de gestion de ces déchets, laquelle est conditionnée par la classification et par la définition des DAH et des DSS adoptées par le pays. Objectifs et Méthodologie. Cet étude prétend: quantifier la production de DAH et de DSS provenant de la prestation de soins de santé, en êtres humains et animaux dans les USS du système public et privé. À travers un étude longitudinal, on quantifie cette production dans les Hôpitaux, Centres de Santé, Cliniques Médicales et Dentaires, Maisons de Repos pour personnes âgées, Cabinets Médicaux d’ Entreprises, Centres d’Hémodialyse et Cliniques Vétérinaires du municipe d’ Amadora, en comparant cette production en deux ans consécutifs; analyser les conséquences de l’exercice du pouvoir de l’Autorité de Santé dans la gestion intégrée des DAH et des DSS par les USS; quantifier la production moyenne de DAH et de DSS dans la prestation de soins domiciliaires et, avec un étude analytique transversal, rapporter cette production moyenne avec les caractéristiques des malades et des soins administrés; procéder à l’ analyse comparative des définitions et classifications des DAH et des DSS dans des pays de l’Union Européenne, à travers un étude de révision de la législation relative à cette matière dans quatre pays, Portugal y compris. Résultats et Conclusions. On obtient la production moyenne de DAH et des DSS, par Classes I+II, III et IV: dans les hôpitaux, par lit.jour, en considérant le taux d’occupation; par consultation, dans les Centres de Santé, Cliniques Médicales et Dentaires et Cabinets Médicaux d’ Entreprises par lit.an dans les Maisons de Repos pour personnes âgées en considérant le taux d’occupation; et par an, dans les Cliniques d’Hémodialyse et Vétérinaires. On constate que l’actuation de l’Autorité de Santé produit dans les USS une différence statistiquement significative dans l’accroissement de leurs contractualisations avec les opérateurs de traitement de DAH et de DSS. On quantifie le poids moyen des déchets des Classes III et IV produit par acte de prestation de soins à domicile et on rapporte cette variable dépendante avec les caractéristiques des malades et des soins administrés. On compare les différents critères utilisés dans l’élaboration des définitions et des classifications de ces déchets inscrites dans la légis

New recycling approaches for thermoset polymeric composite wastes – an experimental study on polyester based concrete materials filled with fibre reinforced plastic recyclates

In this study, a new waste management solution for thermoset glass fibre reinforced polymer (GFRP) based products was assessed. Mechanical recycling approach, with reduction of GFRP waste to powdered and fibrous materials was applied, and the prospective added-value of obtained recyclates was experimentally investigated as raw material for polyester based mortars. Different GFRP waste admixed mortar formulations were analyzed varying the content, between 4% up to 12% in weight, of GFRP powder and fibre mix waste. The effect of incorporation of a silane coupling agent was also assessed. Design of experiments and data treatment was accomplished through implementation of full factorial design and analysis of variance ANOVA. Added value of potential recycling solution was assessed by means of flexural and compressive loading capacity of GFRP waste admixed mortars with regard to unmodified polymer mortars. The key findings of this study showed a viable technological option for improving the quality of polyester based mortars and highlight a potential cost-effective waste management solution for thermoset composite materials in the production of sustainable concrete-polymer based products.