Variabilidad espacial de la pesquería de Dosidicus gigas (d’Orbigny, 1835) calamar gigante del 2004 al 2012

Se efectuó un análisis de la distribución espacial de operaciones de pesca de la flota calamarera industrial dentro y fuera de la zona económica exclusiva peruana (ZEE) con relación a la temperatura superficial de mar (TSM) y concentración de clorofila-a (Cl-a) para el periodo 2004-2012. La data de operaciones de pesca se dividió en tres periodos en función a distancia a la costa considerando regulaciones de pesca, de enero 2004 a octubre 2010, de noviembre 2010 a diciembre 2011 y 2012. Durante el primer periodo, se identificaron dos patrones mensuales de distribución espacial, de enero a julio fue a lo largo del litoral desde Paita (5°S) hasta San Juan de Marcona (15°22’S) y de agosto a diciembre entre Chimbote y Paita. En el segundo periodo, las operaciones de pesca formaron pequeñas concentraciones y puntos de pesca dispersas debido a la restricción de pesca dentro de las 80 millas náuticas desde noviembre del 2010. Durante el 2012 la flota se localizó fuera de la ZEE. Las mayores concentraciones de la flota se ubicaron entre 30 a 90 millas náuticas de la costa. Mayores concentraciones de pesca se localizaron en Paita-Chimbote (5°-9°S) y Callao- San Juan de Marcona (12°03’-15°22’S). Las faenas de pesca se realizaron en un rango amplio de TSM entre 14,1 y 26,8 °C, con mayor incidencia en temperaturas entre 18,4 a 22 °C, con tendencia a localizarse en áreas de mayor temperatura durante los últimos años. Respecto a la clorofila-a, la flota faenó entre concentraciones de clorofila-a de 0 a 9,5 mg/m3 dentro de la ZEE, y entre 0,2 y 0,5 mg/m3 fuera de la ZEE. Se observó un patrón de distribución de flota, asociado a las anomalías de temperatura superficial de mar del área El Niño 1+2, a la distribución latitudinal y una variabilidad cíclica mensual de la TSM.

Passive knee-extension test to measure hamstring tightness: influence of gravity correction

CONTEXT: A passive knee-extension test has been shown to be a reliable method of assessing hamstring tightness, but this method does not take into account the potential effect of gravity on the tested leg. OBJECTIVE: To compare an original passive knee-extension test with 2 adapted methods including gravity's effect on the lower leg. DESIGN: Repeated measures. SETTING: Laboratory. PARTICIPANTS: 20 young track and field athletes (16.6 ± 1.6 y, 177.6 ± 9.2 cm, 75.9 ± 24.8 kg). INTERVENTION: Each subject was tested in a randomized order with 3 different methods: In the original one (M1), passive knee angle was measured with a standard force of 68.7 N (7 kg) applied proximal to the lateral malleolus. The second (M2) and third (M3) methods took into account the relative lower-leg weight (measured respectively by handheld dynamometer and anthropometrical table) to individualize the force applied to assess passive knee angle. MAIN OUTCOME MEASURES: Passive knee angles measured with video-analysis software. RESULTS: No difference in mean individualized applied force was found between M2 and M3, so the authors assessed passive knee angle only with M2. The mean knee angle was different between M1 and M2 (68.8 ± 12.4 vs 73.1 ± 10.6, P < .001). Knee angles in M1 and M2 were correlated (r = .93, P < .001). CONCLUSIONS: Differences in knee angle were found between the original passive knee-extension test and a method with gravity correction. M2 is an improved version of the original method (M1) since it minimizes the effect of gravity. Therefore, we recommend using it rather than M1.

Estudi per a la construcció de l'EDAR mitjançant filtres verds de la Nou de Gaià (Tarragonès)

El tractament de les aigües en nuclis menors de 2000 habitants es troba pendent de completar per part de l’Agència Catalana de l’Aigua més concretament al corresponent Pla de Sanejament d’Aigües Residuals Urbanes (PSARU). El nucli de La Nou de Gaià (al Tarragonès) es troba pendent de la construcció de la corresponent instal·lació de sanejament, projectada al 2007. Alternativament a les depuradores tradicionals basades en l’ús de formigó (o materials alternatius) i en la despesa elèctrica per assegurar una aeració i una evacuació dels fangs generats, existeixen tecnologies “toves”. Aquestes tecnologies, també conegudes com a “verdes”, es basen en imitar els sistemes naturals maximitzant el seu potencial d’autodepuració. A grans trets existeixen dos formes de depurar les aigües de forma ecològica”: llacunatges (existeix una capa d’aigua lliure) i filtres verds. El present estudi es basa en l’aplicació de filtres verds de morfologia vertical i flux subsuperficial, plantat amb canyes dels generes Scirpus o Phragmites. El resultat han estat 4 bases de 35*35 per a tractar un cabal de 150 m3/d i una població equivalent de 1272.

Alterações de alguns atributos físicos e das frações húmicas de um Nitossolo vermelho na sucessão milheto-soja em sistema plantio direto

No Estado de São Paulo, restrições do regime de chuvas no período de outono-inverno e temperaturas elevadas limitam a produção e a manutenção de cobertura no solo, tornando importante estudar alternativas para a implantação eficaz do Sistema Plantio Direto nesse Estado, especialmente para produção de fitomassa e manejo adequado para maior persistência da palha, em quantidade suficiente para melhoria da qualidade física e da matéria orgânica do solo. O experimento, conduzido em Nitossolo Vermelho distroférrico, na Fazenda Experimental Lageado-FCA-UNESP-Botucatu, teve por objetivo estudar no sistema plantio direto as prováveis alterações de alguns atributos físicos e das frações húmicas do solo com a utilização do milheto, verificando sua resposta, em três épocas de semeadura e sob cinco manejos dos resíduos, após cinco anos de estabelecida essa sucessão. O delineamento experimental foi o de blocos casualizados, com esquema de parcelas subdivididas, com quatro repetições. As parcelas foram representadas por três épocas de semeadura da cultura do milheto: época 1 (E1), época 2 (E2) e época 3 (E3). As subparcelas foram representadas por manejos da ceifa da fitomassa, sendo: manejo 1 (M1) - ceifa a cada florescimento e retirada da fitomassa; manejo 2 (M2) - ceifa a cada florescimento e permanência da fitomassa; manejo 3 (M3) - ceifa apenas no primeiro florescimento e retirada da fitomassa; manejo 4 (M4) - ceifa apenas no primeiro florescimento e permanência da fitomassa; e manejo 5 (M5) - livre crescimento. Foram coletadas amostras de solo com estrutura indeformada para realização das análises físicas, para as quais as profundidades amostradas foram: 0-0,05, 0,05-0,10 e 0,10-0,20 m. Para fracionamento químico da matéria orgânica, as profundidades foram de 0-0,05 e 0,05-0,10 m. Em relação às culturas, avaliou-se a produtividade da soja, e para o milheto, a quantidade de matéria seca produzida pela parte aérea e a percentagem de fitomassa em cobertura deixada sobre o solo. A produtividade de matéria seca do milheto decresceu na ordem E1 > E2 > E3. A densidade do solo, a macroporosidade, a microporosidade e a porosidade total variaram com a época de semeadura do milheto. A adição contínua de fitomassa com ceifa a cada florescimento e permanência da cobertura proporcionou maior incremento nas frações menos estáveis da matéria orgânica (ácido húmico e ácido fúlvico). Recomenda-se, diante das condições edafoclimáticas estudadas, a semeadura do milheto na segunda e terceira épocas com ceifa apenas no primeiro florescimento, sempre se utilizando da permanência da fitomassa, para obter melhor cobertura, qualidade física do solo (menor densidade do solo, maior porosidade total) e maior produtividade para soja.

Interpretação de resultados analíticos de fósforo pelos extratores Mehlich-1 e Mehlich-3 em solos do Rio Grande do Sul

As soluções extratoras multielementares possibilitam avaliar a disponibilidade de vários nutrientes de plantas no mesmo extrato; dentre estes o P merece especial atenção. As soluções Mehlich-1 (M1) e Mehlich-3 (M3) enquadram-se nesta categoria. Neste estudo, foram comparados os teores de P extraídos por estas soluções em 360 amostras de solos do Estado do Rio Grande do Sul. Os coeficientes de correlação entre os teores de P extraído pelas mesmas indicaram alto grau de associação e de significância. Os teores de P extraído pela solução Mehlich-3 foram, em média, 50 % maiores que os extraídos pela solução Mehlich-1. O teor de argila, entretanto, influenciou a capacidade extrativa de P pela solução Mehlich-3, sendo necessária uma tabela de ajuste para a interpretação dos valores do P extraído por esta solução.

Disponibilidade de cobre e zinco em solos do sul do Brasil

O estudo da eficiência de soluções extratoras multielementares para avaliação da disponibilidade de nutrientes do solo às plantas tem aumentado. O uso dessas soluções aumenta a eficiência dos laboratórios de análise de solo devido à redução de procedimentos analíticos. Além disso, a determinação de nutrientes por espectrometria de emissão ótica por plasma induzido (ICP-OES) tem aumentado nos últimos anos, visando principalmente à redução dos procedimentos analíticos e dos limites de detecção. Com os objetivos de selecionar métodos de extração e verificar a eficiência para avaliar a disponibilidade de Cu e Zn para as plantas, foram realizados estudos em casa de vegetação e em laboratório. Em casa de vegetação, amostras de solos representativos do Estado do Rio Grande do Sul foram cultivadas, em vasos de 11 dm³ (a céu aberto), com plantas de milho (Zea mays), por 45 d e, em sequência, com soja (Glycine max), por mais 45 d. Os métodos estudados para extração de Zn e Cu foram: HCl 0,1 mol L-1 (HCl), Mehlich-1 (M1) e Mehlich-3 (M3). Os coeficientes de determinação obtidos entre as quantidade de Cu absorvida pelas plantas e o extraído pelos diferentes métodos foram: HCl = 0,56**, M1 = 0,35*; M3 = 0,46** para as plantas de milho; e HCl = 0,66**, M1 = 0,43*, M3 = 0,93** para as de soja. Para o Zn absorvido pelas plantas e o extraído pelos diferentes métodos, foram: HCl = 0,18*, M1 = 0,32**, M3 = 0,10* e HCl = 0,37*, M1 = 0,36**, M3 = 0,31*, respectivamente para as plantas de milho e de soja. Os métodos tiveram baixa capacidade preditiva na avaliação da disponibilidade de Cu e de Zn para as plantas.

Occupational respiratory exposures to irritating and sensitizing volatile compounds deriving from cleaning products

Recent findings suggest an association between exposure to cleaning products and respiratory dysfunctions including asthma. However, little information is available about quantitative airborne exposures of professional cleaners to volatile organic compounds deriving from cleaning products. During the first phases of the study, a systematic review of cleaning products was performed. Safety data sheets were reviewed to assess the most frequently added volatile organic compounds. It was found that professional cleaning products are complex mixtures of different components (compounds in cleaning products: 3.5 ± 2.8), and more than 130 chemical substances listed in the safety data sheets were identified in 105 products. The main groups of chemicals were fragrances, glycol ethers, surfactants, solvents; and to a lesser extent phosphates, salts, detergents, pH-stabilizers, acids, and bases. Up to 75% of products contained irritant (Xi), 64% harmful (Xn) and 28% corrosive (C) labeled substances. Hazards for eyes (59%), skin (50%) and by ingestion (60%) were the most reported. Monoethanolamine, a strong irritant and known to be involved in sensitizing mechanisms as well as allergic reactions, is frequently added to cleaning products. Monoethanolamine determination in air has traditionally been difficult and air sampling and analysis methods available were little adapted for personal occupational air concentration assessments. A convenient method was developed with air sampling on impregnated glass fiber filters followed by one step desorption, gas chromatography and nitrogen phosphorous selective detection. An exposure assessment was conducted in the cleaning sector, to determine airborne concentrations of monoethanolamine, glycol ethers, and benzyl alcohol during different cleaning tasks performed by professional cleaning workers in different companies, and to determine background air concentrations of formaldehyde, a known indoor air contaminant. The occupational exposure study was carried out in 12 cleaning companies, and personal air samples were collected for monoethanolamine (n=68), glycol ethers (n=79), benzyl alcohol (n=15) and formaldehyde (n=45). All but ethylene glycol mono-n-butyl ether air concentrations measured were far below (<1/10) of the Swiss eight hours occupational exposure limits, except for butoxypropanol and benzyl alcohol, where no occupational exposure limits were available. Although only detected once, ethylene glycol mono-n-butyl ether air concentrations (n=4) were high (49.5 mg/m3 to 58.7 mg/m3), hovering at the Swiss occupational exposure limit (49 mg/m3). Background air concentrations showed no presence of monoethanolamine, while the glycol ethers were often present, and formaldehyde was universally detected. Exposures were influenced by the amount of monoethanolamine in the cleaning product, cross ventilation and spraying. The collected data was used to test an already existing exposure modeling tool during the last phases of the study. The exposure estimation of the so called Bayesian tool converged with the measured range of exposure the more air concentrations of measured exposure were added. This was best described by an inverse 2nd order equation. The results suggest that the Bayesian tool is not adapted to predict low exposures. The Bayesian tool should be tested also with other datasets describing higher exposures. Low exposures to different chemical sensitizers and irritants should be further investigated to better understand the development of respiratory disorders in cleaning workers. Prevention measures should especially focus on incorrect use of cleaning products, to avoid high air concentrations at the exposure limits. - De récentes études montrent l'existence d'un lien entre l'exposition aux produits de nettoyages et les maladies respiratoires telles que l'asthme. En revanche, encore peu d'informations sont disponibles concernant la quantité d'exposition des professionnels du secteur du nettoyage aux composants organiques volatiles provenant des produits qu'ils utilisent. Pendant la première phase de cette étude, un recueil systématique des produits professionnels utilisés dans le secteur du nettoyage a été effectué. Les fiches de données de sécurité de ces produits ont ensuite été analysées, afin de répertorier les composés organiques volatiles les plus souvent utilisés. Il a été mis en évidence que les produits de nettoyage professionnels sont des mélanges complexes de composants chimiques (composants chimiques dans les produits de nettoyage : 3.5 ± 2.8). Ainsi, plus de 130 substances listées dans les fiches de données de sécurité ont été retrouvées dans les 105 produits répertoriés. Les principales classes de substances chimiques identifiées étaient les parfums, les éthers de glycol, les agents de surface et les solvants; dans une moindre mesure, les phosphates, les sels, les détergents, les régulateurs de pH, les acides et les bases ont été identifiés. Plus de 75% des produits répertoriés contenaient des substances décrites comme irritantes (Xi), 64% nuisibles (Xn) et 28% corrosives (C). Les risques pour les yeux (59%), la peau (50%) et par ingestion (60%) était les plus mentionnés. La monoéthanolamine, un fort irritant connu pour être impliqué dans les mécanismes de sensibilisation tels que les réactions allergiques, est fréquemment ajouté aux produits de nettoyage. L'analyse de la monoéthanolamine dans l'air a été habituellement difficile et les échantillons d'air ainsi que les méthodes d'analyse déjà disponibles étaient peu adaptées à l'évaluation de la concentration individuelle d'air aux postes de travail. Une nouvelle méthode plus efficace a donc été développée en captant les échantillons d'air sur des filtres de fibre de verre imprégnés, suivi par une étape de désorption, puis une Chromatographie des gaz et enfin une détection sélective des composants d'azote. Une évaluation de l'exposition des professionnels a été réalisée dans le secteur du nettoyage afin de déterminer la concentration atmosphérique en monoéthanolamine, en éthers de glycol et en alcool benzylique au cours des différentes tâches de nettoyage effectuées par les professionnels du nettoyage dans différentes entreprises, ainsi que pour déterminer les concentrations atmosphériques de fond en formaldéhyde, un polluant de l'air intérieur bien connu. L'étude de l'exposition professionnelle a été effectuée dans 12 compagnies de nettoyage et les échantillons d'air individuels ont été collectés pour l'éthanolamine (n=68), les éthers de glycol (n=79), l'alcool benzylique (n=15) et le formaldéhyde (n=45). Toutes les substances mesurées dans l'air, excepté le 2-butoxyéthanol, étaient en-dessous (<1/10) de la valeur moyenne d'exposition aux postes de travail en Suisse (8 heures), excepté pour le butoxypropanol et l'alcool benzylique, pour lesquels aucune valeur limite d'exposition n'était disponible. Bien que détecté qu'une seule fois, les concentrations d'air de 2-butoxyéthanol (n=4) étaient élevées (49,5 mg/m3 à 58,7 mg/m3), se situant au-dessus de la frontière des valeurs limites d'exposition aux postes de travail en Suisse (49 mg/m3). Les concentrations d'air de fond n'ont montré aucune présence de monoéthanolamine, alors que les éthers de glycol étaient souvent présents et les formaldéhydes quasiment toujours détectés. L'exposition des professionnels a été influencée par la quantité de monoéthanolamine présente dans les produits de nettoyage utilisés, par la ventilation extérieure et par l'emploie de sprays. Durant la dernière phase de l'étude, les informations collectées ont été utilisées pour tester un outil de modélisation de l'exposition déjà existant, l'outil de Bayesian. L'estimation de l'exposition de cet outil convergeait avec l'exposition mesurée. Cela a été le mieux décrit par une équation du second degré inversée. Les résultats suggèrent que l'outil de Bayesian n'est pas adapté pour mettre en évidence les taux d'expositions faibles. Cet outil devrait également être testé avec d'autres ensembles de données décrivant des taux d'expositions plus élevés. L'exposition répétée à des substances chimiques ayant des propriétés irritatives et sensibilisantes devrait être investiguée d'avantage, afin de mieux comprendre l'apparition de maladies respiratoires chez les professionnels du nettoyage. Des mesures de prévention devraient tout particulièrement être orientées sur l'utilisation correcte des produits de nettoyage, afin d'éviter les concentrations d'air élevées se situant à la valeur limite d'exposition acceptée.

Disponibilidade de potássio para as plantas em solos do sul do Brasil estimada por métodos multielementares

A avaliação da disponibilidade de K para as plantas é feita pela estimativa de seus teores na forma trocável. Métodos multielementares aumentam a eficiência nos laboratórios de análises de solo, porém a capacidade de troca de cátions (CTC) do solo pode alterar a predição do K disponível. O objetivo deste trabalho foi estimar o K disponível para o milho e para a soja em solos representativos do Estado do RS, pelos métodos Mehlich-1 (M1), Mehlich-3 (M3), resina de troca iônica (resina) e Acetato de Amônio pH 7,0 (AcNH4), bem como verificar se a CTC influencia a estimativa da disponibilidade de K no solo para as plantas. O experimento foi conduzido em microparcelas a céu aberto e, após 45 dias de cultivo, quantificou-se a matéria seca da parte aérea das plantas e determinou-se o o teor de K no tecido. Foram feitas as correlações entre os teores de K extraídos pelos métodos e a relação com a absorção de K pelas plantas em todos os solos e separando os solos em classes de CTC. As quantidades de K extraídas pela resina foram aproximadamente 50 % menores que as das soluções de M1, M3 e AcNH4. Os coeficientes de correlação entre os teores de K extraído pelos métodos tiveram alto grau de associação. A relação entre os teores de K acumuladas pelas culturas e os teores extraídos pelos métodos não diferiram, independentemente da separação por classes de CTC. A disponibilidade de K para as plantas em solos do RS pode ser feita pelos métodos testados no presente trabalho. Não houve diferença entre os métodos na avaliação da disponibilidade de K nas classes de CTC. O método da resina, embora não diferindo dos demais na predição do teor de K disponível, apresenta desvantagem em relação aos demais pela menor capacidade extrativa, o que resulta em classes de disponibilidade menores e propicia o erro analítico.

The nitrogen sufficiency index underlying estimates of nitrogen fertilization requirements of common bean

Chlorophyll determination with a portable chlorophyll meter can indicate the period of highest N demand of plants and whether sidedressing is required or not. In this sense, defining the optimal timing of N application to common bean is fundamental to increase N use efficiency, increase yields and reduce the cost of fertilization. The objectives of this study were to evaluate the efficiency of N sufficiency index (NSI) calculated based on the relative chlorophyll index (RCI) in leaves, measured with a portable chlorophyll meter, as an indicator of time of N sidedressing fertilization and to verify which NSI (90 and 95 %) value is the most appropriate to indicate the moment of N fertilization of common bean cultivar Perola. The experiment was carried out in the rainy and dry growing seasons of the agricultural year 2009/10 on a dystroferric Red Nitosol, in Botucatu, São Paulo State, Brazil. The experiment was arranged in a randomized complete block design with five treatments, consisting of N managements (M1: 200 kg ha-1 N (40 kg at sowing + 80 kg 15 days after emergence (DAE) + 80 kg 30 DAE); M2: 100 kg ha-1 N (20 kg at sowing + 40 kg 15 DAE + 40 kg 30 DAE); M3: 20 kg ha-1 N at sowing + 30 kg ha-1 when chlorophyll meter readings indicated NSI < 95 %; M4: 20 kg ha-1 N at sowing + 30 kg ha-1 N when chlorophyll meter readings indicated NSI < 90 % and, M5: control (without N application)) and four replications. The variables RCI, aboveground dry matter, total leaf N concentration, production components, grain yield, relative yield, and N use efficiency were evaluated. The RCI correlated with leaf N concentrations. By monitoring the RCI with the chlorophyll meter, the period of N sidedressing of common bean could be defined, improving N use efficiency and avoiding unnecessary N supply to common bean. The NSI 90 % of the reference area was more efficient to define the moment of N sidedressing of common bean, to increase N use efficiency.

Can one or two high doses of oral vitamin D3 correct insufficiency in a non-supplemented rheumatologic population?

We evaluated the effectiveness of supplementation with high dose of oral vitamin D3 to correct vitamin D insufficiency. We have shown that one or two oral bolus of 300,000 IU of vitamin D3 can correct vitamin D insufficiency in 50% of patients and that the patients who benefited more from supplementation were those with the lowest baseline levels. INTRODUCTION: Adherence with daily oral supplements of vitamin D3 is suboptimal. We evaluated the effectiveness of a single high dose of oral vitamin D3 (300,000 IU) to correct vitamin D insufficiency in a rheumatologic population. METHODS: Over 1 month, 292 patients had levels of 25-OH vitamin D determined. Results were classified as: deficiency <10 ng/ml, insufficiency ≥10 to 30 ng/ml, and normal ≥30 ng/ml. We added a category using the IOM recommended cut-off of 20 ng/ml. Patients with deficient or normal levels were excluded, as well as patients already supplemented with vitamin D3. Selected patients (141) with vitamin D insufficiency (18.5 ng/ml (10.2-29.1) received a prescription for 300,000 IU of oral vitamin D3 and were asked to return after 3 (M3) and 6 months (M6). Patients still insufficient at M3 received a second prescription for 300,000 IU of oral vitamin D3. Relation between changes in 25-OH vitamin D between M3 and M0 and baseline values were assessed. RESULTS: Patients (124) had a blood test at M3. Two (2%) had deficiency (8.1 ng/ml (7.5-8.7)) and 50 (40%) normal results (36.7 ng/ml (30.5-5.5)). Seventy-two (58%) were insufficient (23.6 ng/ml (13.8-29.8)) and received a second prescription for 300,000 IU of oral vitamin D3. Of the 50/124 patients who had normal results at M3 and did not receive a second prescription, 36 (72%) had a test at M6. Seventeen (47%) had normal results (34.8 ng/ml (30.3-42.8)) and 19 (53%) were insufficient (25.6 ng/ml (15.2-29.9)). Of the 72/124 patients who receive a second prescription, 54 (75%) had a test at M6. Twenty-eight (52%) had insufficiency (23.2 ng/ml (12.8-28.7)) and 26 (48%) had normal results (33.8 ng/ml (30.0-43.7)). At M3, 84% patients achieved a 25-OH vitamin D level >20 ng/ml. The lowest the baseline value, the highest the change after 3 months (negative relation with a correlation coefficient r = -0.3, p = 0.0007). CONCLUSIONS: We have shown that one or two oral bolus of 300,000 IU of vitamin D3 can correct vitamin D insufficiency in 50% of patients.

Characterizing emission and breathing-zone concentrations following exposure cases to fluororesin-based waterproofing spray mists.

Measurements and simulations were performed to assess workers' exposure to solvent vapors and aerosols during the waterproofing of a tiled surface. This investigation followed two recent incidents in the same company where workers experienced acute respiratory illness after spraying a stain-repellent resin containing fluorinated polymers on stone-tiled walls and floors. Because the waterproofing activity had been done for years at the tile company without encountering any exposure problems prior to these cases, it was strongly suspected that the incidents were linked to a recent change in the composition of the coating mixture. Experimental measurements and simulations indicated that the emission rate of particles smaller than 10 microm may be estimated at 0.66 mg/sec (SD 0.10) for the old resin and at 0.37 mg/sec (SD 0.04) for the new one. The measurement of the solvent emission rate from surfaces coated with the two resins indicated that shortly after spraying, the emission was in the range of 18 to 20 mg/sec x m2 and was similar for both products. Solvent and overspray emission rates were introduced in a two-zone compartment model. The results obtained in the near-field indicate significant exposure to overspray mist (7 and 34 mg/m3 for new resin) and solvent vapors (80 to 350 ppm for the new resin). It was also shown that the introduction of the new resin tended to significantly decrease the levels of solvents and particulates in the workers' breathing zone. These results strongly suggest that cases of acute respiratory illness are related to the specific toxicity of the fluorinated polymer itself. The fact that the same polymer is used in various commercial products raises concern regarding other possible occupational and domestic exposures.

Microscopic calculations of the excitation spectrum of one 3He impurity in liquid 4He

We calculate the chemical potential ¿0 and the effective mass m*/m3 of one 3He impurity in liquid 4He. First a variational wave function including two- and three-particle dynamical correlations is adopted. Triplet correlations bring the computed values of ¿0 very close to the experimental results. The variational estimate of m*/m3 includes also backflow correlations between the 3He atom and the particles in the medium. Different approximations for the three-particle distribution function give almost the same values for m*/m3. The variational approach underestimates m*/m3 by ~10% at all of the considered densities. Correlated-basis perturbation theory is then used to improve the wave function to include backflow around the particles of the medium. The perturbative series built up with one-phonon states only is summed up to infinite order and gives results very close to the variational ones. All the perturbative diagrams with two independent phonons have then been summed to compute m*/m3. Their contribution depends to some extent on the form used for the three-particle distribution function. When the scaling approximation is adopted, a reasonable agreement with the experimental results is achieved.

The 2006 Eiger rockslide, European Alps

In July 2006, approximately 2 million m3 of massive limestone began to move on the east flank of the Eiger in central Switzerland. For more than two years after the initial failure, the rock mass moved at rates of up to 70 cm per day. A detailed analysis of the structures and velocities of the different moving blocks was conducted with the aid of terrestrial laser scanning. The moving rock mass included a rear block that subsided, pushing a frontal block forward. Movement directions were controlled by discontinuity sets that formed wedges bounded on one side by sub-vertical bedding planes. The instability was, until recently, buttressed by a glacier. Slope observations and results of continuum and discontinuum modeling indicate that the structure of the rock mass and topography were the main causes of the instability. Progressive weathering and mechanical fatigue of the rock mass appear to have led to the failure. A dynamic analytical model further indicates that the rockslide was primarily controlled by a reduction in the strength of discontinuities, the effects of ice deformation, and ? to a limited extent ? groundwater flow. This study shows that realistic and simple instability models can be constructed for rock-slope failures if high-resolution data are available.

Liberação de nitrato de hidróxidos duplos lamelares como potenciais fertilizantes de liberação lenta

Hidróxidos duplos lamelares (HDL) são intercaladores potenciais aniônicos. Com o objetivo de obter fertilizantes de liberação lenta de nitrato, foram sintetizados HDL com a fórmula geral [M2+1-xM3+x(OH)2]x-(NO3)x.yH2O, em que M2+ = Mg2+ e M3+ = Al3+ e, ou, Fe3+, utilizando-se o método de coprecipitação a pH alcalino constante. Medidas de difração de raios-X evidenciaram que a cristalinidade aumenta com o acréscimo do valor de pH e da razão molar M2+/M3+. As medidas de FTIR apresentaram bandas características de nitrato livre no espaço interlamelar, além de pequena contaminação de íons carbonato. Medidas de TGA/DTA possibilitaram a confirmação das composições e dos teores de íons de nitrato intercalados. As curvas de liberação de nitrato demonstraram dois comportamentos de liberação complementar, um inicial rápido (A) e um lento gradativo (D), sendo, este último, relacionado à orientação planar do íon nitrato intercalado. Os materiais sintetizados e investigados neste trabalho apontaram grande potencial para serem utilizados como matrizes para fertilizantes de liberação lenta de nitrato.

Preliminary assessment of rockslide and rockfall hazards using a DEM (Oppstadhornet, Norway)

The increasing availability and precision of digital elevation model (DEM) helps in the assessment of landslide prone areas where only few data are available. This approach is performed in 6 main steps which include: DEM creation; identification of geomorphologic features; determination of the main sets of discontinuities; mapping of the most likely dangerous structures; preliminary rock-fall assessment; estimation of the large instabilities volumes. The method is applied to two the cases studies in the Oppstadhornet mountain (730m alt): (1) a 10 millions m3 slow-moving rockslide and (2) a potential high-energy rock falling prone area. The orientations of the foliation and of the major discontinuities have been determined directly from the DEM. These results are in very good agreement with field measurements. Spatial arrangements of discontinuities and foliation with the topography revealed hazardous structures. Maps of potential occurrence of these hazardous structures show highly probable sliding areas at the foot of the main landslide and potential rock falls in the eastern part of the mountain.