Cleaner Production initiatives and challenges for a sustainable world: an introduction to this special volume

This special volume of the Journal of Cleaner Production is comprised of articles presented at the 3rd International Workshop Advances in Cleaner Production held in Sao Paulo, Brazil, in 2011. The content underscores the recognition of the pressing and inescapable need for making changes from unsustainable to sustainable production and consumption patterns. The 48 articles from 15 countries provide different, but complimentary approaches to help industrial and societal sectors in advancing on their paths towards sustainability. Initiatives and challenges are included, which systematically address problems affecting raw material changes, technological modifications, product and policy changes. The findings range from proposals for alternative uses of wastes, substitution of raw materials for environmentally friendlier substances, optimization of industrial processes by source reductions of wastes and emissions and documented economic and environmental advantages of a wide array of initiatives. The roles of operational and managerial practices are also stressed, highlighting the role of diverse stakeholders as promoters of implementation and internalization of innovative cleaner technologies within companies. Systemic assessment tools are employed and experimented with in order to more effectively evaluate the environmental performance of systems on the biosphere scale. The methodological procedures and proposals presented can help in the design and management of production systems, for governmental and corporate policy development, for implementing and monitoring CP Programs, prevention and mitigation strategies, and evaluation of the outcomes of CP initiatives in the production and service sectors. (C) 2013 Elsevier Ltd. All rights reserved.

Food supply and raw materials in Japan : an index of the physical volume of production of foodstuffs, industrial crops, and minerals, 1894-1927 /

Published in 1929 under title: Agricultural and mineral production in Japan.

Small car driver inflatable restraint system evaluation. Volume III: investigation of potential crash survivability of a current production subcompact vehicle equipped with an advanced driver restraint system. Final report.

National Highway Traffic Safety Administration, Washington, D.C.

Automotive manufacturing processes. Volume V - manufacturing processes and equipment for the mass production and assembly of motor vehicles. Final report.

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

Multinational activities of major U.S. automotive producers. Volume V - diffusion of production and sales operations abroad. Final report.

National Highway Traffic Safety Administration, Office of Research and Development, Washington, D.C.

Perspectives on the top 50 production volume chemicals /

Mode of access: Internet.

Stem and Branch Diameter Response in Pruned Douglas-fir Plantations (Pseudotsuga menziesii var. menziesii): Implications for Volume and Clear Wood Production in the U.S. Pacific Northwest

Thesis (Master's)--University of Washington, 2016-06

A finite-volume shallow layer method for the MHD instabilities in an aluminium production cell

An electrolytic cell for Aluminium production contains molten metal and molten electrolyte, which are subject to high dc-currents and magnetic fields. Lorentz forces arising from the cross product of current and magnetic field may amplify natural gravity waves at the interface between the two fluids, leading to short circuits in extreme cases. The external magnetic field and current distribution in the production cell is computed through a detailed finite element analysis at Torino Polytechnic. The results are then used to compute the magnetohydrodynamic and thermal effects in the aluminium/electrolyte bath. Each cell has lateral dimensions of 6m x 2m, whilst the bath depth is only 30cm. the electrically resistive electrolyte path, which is critical in the operation of the cell, has layer depth of only a few centimetres below each carbon anode. Because the shallow dimensions of the liquid layer a finite-volume shallow-layer technique has been used at Greenwich to compute the resulting flow-field and interface perturbations. The information obtained from this method, i.e. depth averaged velocities and aluminium/electrolyte interface position is then embedded in the three-dimensional finite volume code PHYSICA and will be used to compute the heat transfer and phase change in the cell.

Microbial Lipid Production: Screening With Yeasts Grown On Brazilian Molasses.

Rhodotorula glutinis CCT 2182, Rhodosporidium toruloides CCT 0783, Rhodotorula minuta CCT 1751 and Lipomyces starkeyi DSM 70296 were evaluated for the conversion of sugars from Brazilian molasses into single-cell oil (SCO) feedstock for biodiesel. Pulsed fed-batch fermentations were performed in 1.65 l working volume bioreactors. The maximum specific growth rate (µmax), lipid productivity (Pr) and cellular lipid content were, respectively, 0.23 h(-1), 0.41 g l(-1) h(-1), and 41% for Rsp. toruloides; 0.20 h(-1), 0.27 g l(-1) h(-1), and 36% for Rta. glutinis; 0.115 h(-1), 0.135 g l(-1) h(-1), and 27 % for Rta. minuta; and 0.11 h(-1), 0.13 g l(-1) h(-1), and 32% for L. starkeyi. Based on their microbial lipid productivity, content, and profile, Rsp. toruloides and Rta. glutinis are promising candidates for biodiesel production from Brazilian molasses. All the oils from the yeasts were similar to the composition of plant oils (rapeseed and soybean) and could be used as raw material for biofuels, as well as in food and nutraceutical products.

Enhanced strange baryon production in Au+Au collisions compared to p+p at root s(NN)=200 GeV

We report on the observed differences in production rates of strange and multistrange baryons in Au+Au collisions at s(NN)=200 GeV compared to p+p interactions at the same energy. The strange baryon yields in Au+Au collisions, when scaled down by the number of participating nucleons, are enhanced relative to those measured in p+p reactions. The enhancement observed increases with the strangeness content of the baryon, and it increases for all strange baryons with collision centrality. The enhancement is qualitatively similar to that observed at the lower collision energy s(NN)=17.3 GeV. The previous observations are for the bulk production, while at intermediate p(T),1 < p(T)< 4 GeV/c, the strange baryons even exceed binary scaling from p+p yields.

Production, characterization and application of activated carbon from brewer`s spent grain lignin

Different types of activated carbon were prepared by chemical activation of brewer`s spent grain (BSG) lignin using H(3)PO(4) at various acid/lignin ratios (1, 2, or 3 g/g) and carbonization temperatures (300, 450, or 600 degrees C), according to a 2(2) full-factorial design. The resulting materials were characterized with regard to their surface area, pore volume, and pore size distribution, and used for detoxification of BSG hemicellulosic hydrolysate (a mixture of sugars, phenolic compounds, metallic ions, among other compounds). BSG carbons presented BET surface areas between 33 and 692 m(2)/g, and micro- and mesopores with volumes between 0.058 and 0.453 cm(3)/g. The carbons showed high capacity for adsorption of metallic ions, mainly nickel, iron, chromium, and silicon. The concentration of phenolic compounds and color were also reduced by these sorbents. These results suggest that activated carbons with characteristics similar to those commercially found and high adsorption capacity can be produced from BSG lignin. (C) 2009 Elsevier Ltd. All rights reserved.

Rotifer abundance, biomass, and secondary production after the recovery of hydrologic connectivity between a river and two marginal lakes (Sao Paulo, Brazil)

Rotifera density, biomass, and secondary production on two marginal lakes of Paranapanema River were compared after the recovery of hydrologic connectivity with the river (Sao Paulo State, Brazil). Daily samplings were performed in limnetic zone of both lakes during the rainy season immediately after lateral inflow of water and, in the dry period, six months after hydrologic connectivity recovery. In order to identify the factors that affect rotifer population dynamics, lake water level, volume, depth, temperature, transparency, dissolved oxygen, pH, alkalinity, conductivity, suspended solids, nutrients, and chlorophyll-a were determined. Variations of water physical and chemical factors that affect rotifer population were related to the lake-river degree of connection and to water level rising after drought. The water lateral inflow from the river resulted in an increase in lake water volume, depth, and transparency and a decrease in water pH, alkalinity, and suspended solids. The lake with the wider river connection, more frequent biota exchange, and larger amount of particulate and dissolved materials was richer and more diverse, while rotifer density, biomass, and productivity were lower in both periods studied. Density, biomass, and secondary production were higher in the lake with the smaller river connection and the higher physical and chemical stability. Our results show that the connectivity affects the limnological stability, associated to seasonality. Stable conditions, caused by low connectivity in dry periods, were related with high density, biomass and secondary production. Conversely, instability conditions in rainy periods were associated to elevated richness and diversity values, caused by exchange biota due to higher connectivity. (C) 2008 Elsevier GmbH. All rights reserved.