Proposta metodológica para o imageamento digital e modelagem virtual 3d de um bloco de rochas travertinas

In this paper we present the methodological procedures involved in the digital imaging in mesoscale of a block of travertines rock of quaternary age, originating from the city of Acquasanta, located in the Apennines, Italy. This rocky block, called T-Block, was stored in the courtyard of the Laboratório Experimental Petróleo "Kelsen Valente" (LabPetro), of Universidade Estadual de Campinas (UNICAMP), so that from it were performed Scientific studies, mainly for research groups universities and research centers working in brazilian areas of reservoir characterization and 3D digital imaging. The purpose of this work is the development of a Model Solid Digital, from the use of non-invasive techniques of digital 3D imaging of internal and external surfaces of the T-Block. For the imaging of the external surfaces technology has been used LIDAR (Light Detection and Range) and the imaging surface Interior was done using Ground Penetrating Radar (GPR), moreover, profiles were obtained with a Gamma Ray Gamae-spectômetro laptop. The goal of 3D digital imaging involved the identification and parameterization of surface geological and sedimentary facies that could represent heterogeneities depositional mesoscale, based on study of a block rocky with dimensions of approximately 1.60 m x 1.60 m x 2.70 m. The data acquired by means of terrestrial laser scanner made available georeferenced spatial information of the surface of the block (X, Y, Z), and varying the intensity values of the return laser beam and high resolution RGB data (3 mm x 3 mm), total points acquired 28,505,106. This information was used as an aid in the interpretation of radargrams and are ready to be displayed in rooms virtual reality. With the GPR was obtained 15 profiles of 2.3 m and 2 3D grids, each with 24 sections horizontal of 1.3 and 14 m vertical sections of 2.3 m, both the Antenna 900 MHz to about 2600 MHz antenna. Finally, the use of GPR associated with Laser Scanner enabled the identification and 3D mapping of 3 different radarfácies which were correlated with three sedimentary facies as had been defined at the outset. The 6 profiles showed gamma a low amplitude variation in the values of radioactivity. This is likely due to the fact of the sedimentary layers profiled have the same mineralogical composition, being composed by carbonate sediments, with no clay in siliciclastic pellitic layers or other mineral carrier elements radioactive

A autonomia no processo de ensino e aprendizagem de línguas em ambiente virtual (teletandem)

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

THE VIRTUAL ENVIRONMENT OF A RESEARCH GROUP: THE TUTORS' PERSPECTIVE

The Grupo de Estudos e Pesquisas de Tecnologia da Informacao nos Processos de Trabalho em Enfermagem (Study and Research Group for Information Technology in the Nursing Working Processes, GEPETE) has the purpose of producing and socializing knowledge in information technology and health and nursing communication, making associations with research groups in this field and promoting student participation. This study was performed by the group tutors with the objective to report on the development of the virtual learning environment (VLE) and the tutors' experience as mediators of a research group using the Moodle platform. To do this, a VLE was developed and pedagogical mediation was performed following the theme of mentoring. An initial diagnosis was made of the difficulties in using this technology in interaction and communication, which permitted the proposal of continuing to use the platform as a resource to support research activities, offer lead researchers the mechanisms to socialize projects and offer the possibility of giving advice at a distance.

Motor learning, retention and transfer after virtual-reality-based training in Parkinson's disease - effect of motor and cognitive demands of games: a longitudinal, controlled clinical study

Objectives To evaluate the learning, retention and transfer of performance improvements after Nintendo Wii Fit (TM) training in patients with Parkinson's disease and healthy elderly people. Design Longitudinal, controlled clinical study. Participants Sixteen patients with early-stage Parkinson's disease and 11 healthy elderly people. Interventions Warm-up exercises and Wii Fit training that involved training motor (shifts centre of gravity and step alternation) and cognitive skills. A follow-up evaluative Wii Fit session was held 60 days after the end of training. Participants performed a functional reach test before and after training as a measure of learning transfer. Main outcome measures Learning and retention were determined based on the scores of 10 Wii Fit games over eight sessions. Transfer of learning was assessed after training using the functional reach test. Results Patients with Parkinson's disease showed no deficit in learning or retention on seven of the 10 games, despite showing poorer performance on five games compared with the healthy elderly group. Patients with Parkinson's disease showed marked learning deficits on three other games, independent of poorer initial performance. This deficit appears to be associated with cognitive demands of the games which require decision-making, response inhibition, divided attention and working memory. Finally, patients with Parkinson's disease were able to transfer motor ability trained on the games to a similar untrained task. Conclusions The ability of patients with Parkinson's disease to learn, retain and transfer performance improvements after training on the Nintendo Wii Fit depends largely on the demands, particularly cognitive demands, of the games involved, reiterating the importance of game selection for rehabilitation purposes. (C) 2012 Chartered Society of Physiotherapy. Published by Elsevier Ltd. All rights reserved.

Connecting Interactive Arts and Virtual Reality with Enaction

This paper reports on a Virtual Reality theater experiment named Il était Xn fois, conducted by artists and computer scientists working in cognitive science. It offered the opportunity for knowledge and ideas exchange between these groups, highlighting the benefits of collaboration of this kind. Section 1 explains the link between enaction in cognitive science and virtual reality, and specifically the need to develop an autonomous entity which enhances presence in an artificial world. Section 2 argues that enactive artificial intelligence is able to produce such autonomy. This was demonstrated by the theatrical experiment, "Il était Xn fois" (in English: Once upon Xn time), explained in section 3. Its first public performance was in 2009, by the company Dérézo. The last section offers the view that enaction can form a common ground between the artistic and computer science areas.

Ecological validity of virtual reality daily living activities screening for early dementia: longitudinal study

Background: Dementia is a multifaceted disorder that impairs cognitive functions, such as memory, language, and executive functions necessary to plan, organize, and prioritize tasks required for goal-directed behaviors. In most cases, individuals with dementia experience difficulties interacting with physical and social environments. The purpose of this study was to establish ecological validity and initial construct validity of a fire evacuation Virtual Reality Day-Out Task (VR-DOT) environment based on performance profiles as a screening tool for early dementia. Objective: The objectives were (1) to examine the relationships among the performances of 3 groups of participants in the VR-DOT and traditional neuropsychological tests employed to assess executive functions, and (2) to compare the performance of participants with mild Alzheimer’s-type dementia (AD) to those with amnestic single-domain mild cognitive impairment (MCI) and healthy controls in the VR-DOT and traditional neuropsychological tests used to assess executive functions. We hypothesized that the 2 cognitively impaired groups would have distinct performance profiles and show significantly impaired independent functioning in ADL compared to the healthy controls. Methods: The study population included 3 groups: 72 healthy control elderly participants, 65 amnestic MCI participants, and 68 mild AD participants. A natural user interface framework based on a fire evacuation VR-DOT environment was used for assessing physical and cognitive abilities of seniors over 3 years. VR-DOT focuses on the subtle errors and patterns in performing everyday activities and has the advantage of not depending on a subjective rating of an individual person. We further assessed functional capacity by both neuropsychological tests (including measures of attention, memory, working memory, executive functions, language, and depression). We also evaluated performance in finger tapping, grip strength, stride length, gait speed, and chair stands separately and while performing VR-DOTs in order to correlate performance in these measures with VR-DOTs because performance while navigating a virtual environment is a valid and reliable indicator of cognitive decline in elderly persons. Results: The mild AD group was more impaired than the amnestic MCI group, and both were more impaired than healthy controls. The novel VR-DOT functional index correlated strongly with standard cognitive and functional measurements, such as mini-mental state examination (MMSE; rho=0.26, P=.01) and Bristol Activities of Daily Living (ADL) scale scores (rho=0.32, P=.001). Conclusions: Functional impairment is a defining characteristic of predementia and is partly dependent on the degree of cognitive impairment. The novel virtual reality measures of functional ability seem more sensitive to functional impairment than qualitative measures in predementia, thus accurately differentiating from healthy controls. We conclude that VR-DOT is an effective tool for discriminating predementia and mild AD from controls by detecting differences in terms of errors, omissions, and perseverations while measuring ADL functional ability.

The Role for Virtual Patients in the Future of Medical Education

The medical education community is working-across disciplines and across the continuum-to address the current challenges facing the medical education system and to implement strategies to improve educational outcomes. Educational technology offers the promise of addressing these important challenges in ways not previously possible. The authors propose a role for virtual patients (VPs), which they define as multimedia, screen-based interactive patient scenarios. They believe VPs offer capabilities and benefits particularly well suited to addressing the challenges facing medical education. Well-designed, interactive VP-based learning activities can promote the deep learning that is needed to handle the rapid growth in medical knowledge. Clinically oriented learning from VPs can capture intrinsic motivation and promote mastery learning. VPs can also enhance trainees' application of foundational knowledge to promote the development of clinical reasoning, the foundation of medical practice. Although not the entire solution, VPs can support competency-based education. The data created by the use of VPs can serve as the basis for multi-institutional research that will enable the medical education community both to better understand the effectiveness of educational interventions and to measure progress toward an improved system of medical education.

Heckscher-Ohlin : evidence from virtual trade in value added

The fragmentation of production chains across borders is one of the most distinctive feature of the last 30 years of globalization. Nonetheless, our understanding of its implications for trade theory and policy is only in its infancy. We suggest that trade in value added should follow theories of comparative advantage more closely than gross trade, as value-added flows capture where factors of production, e.g. skilled and unskilled labor, are used along the global value chain. We find empirical evidence that Heckscher-Ohlin theory does predict manufacturing trade in value-added, and it does so better than for gross shipment flows. While countries exports across a broad range of sectors, they contribute more value-added in techniques using their abundant factor intensively.

Virtual Instruments in Dimensional Metrology

During the last five years, in order to improve understanding of content related to "Coordinate Metrology", the Laboratorio de Metrología y Metrotecnia (LMM) from the Polytechnic University of Madrid offers its PhD students, as a course work, the construction of a virtual instrument. This virtual instrument simulates the imaging of a part to be measured by optical dimensional metrology instruments (microscopes, profile projectors, vision machines). The LMM provides students with images similar to those they would obtain with real instrumentation for the instrument adjustment and calibration process. Working with these images, students should determine the adjustment parameters of the virtual instrument. Once these parameters are set, the student can perform the proper calibration of the virtual instrument. Beyond this process, the instrument is already able to perform traceable measurement. In order to do that, LMM offers students some images of parts. Students should perform some measurements using those images and estimate the corresponding uncertainties.

Implementación de ingeniería virtual con Joomla!

El Proyecto Final de Carrera(PFC)Implementación de Ingeniería Virtual con Joomla! tiene como objetivo la creación de una plataforma web. Para desarrollar un proyecto de ingeniería multidisciplinar, basado en el trabajo en red, grupos de trabajo y el trabajo flexible. El trabajo en red es desempeñar el trabajo por medio de las Tecnología de la Información y la comunicación (TIC). Los grupos de trabajo están compuestos por personas multidisciplinares, multirraciales, de diferentes religiones, situados en husos horarios distintos y multiculturales donde la colaboración, flexibilidad y la compartición de recursos están a la orden del día. La flexible es la capacidad de adaptación de los propios trabajadores a la demanda de la productividad, los responsables depositan sobre ellos su confianza, recibiendo el trabajo terminado en forma y fecha. Estos trabajadores no necesitan una supervisión constante ni un sitio fijo donde realizar su trabajo. Todo lo que necesitan esta en la red, la información que necesitan como las herramientas. Convirtiéndose este tipo de trabajador en teletrabajadores. Estos trabajadores utilizan de forma intensiva sus conocimientos, no se puede permitir quedarse obsoletos en su conocimientos, sería su gran desgracia. Por está razón, necesitan estar formándose continuamente, aprendiendo y conociendo las nuevas tecnologías que aparecen. Con el objetivo de conseguir nuevas líneas de negocio, con el fin de lograr nuevos ingresos. Los trabajadores que hacen un uso intensivo en la tecnología de la información y comunicación, se caracterizan por la continua innovación y cambio tecnológico. Estos trabajadores necesitan una red profesional, social amplia con enlaces fuertes y poderosos. Las redes son importantes, para estar actualizado con las innovaciones que se realizan en las empresas, optar a nuevos puesto de trabajo, curso en nuevas tecnologías… Gracias a los servicios actuales en Internet facilitan mantener vivos una gran cantidad de enlaces (contactos), en comparación con otras épocas. La plataforma propuesta en este proyecto final de carrera esta compuesta de todas las herramientas necesarias para que estos trabajadores puedan desarrollar su actividad y mantenimiento de sus redes profesionales. Abstract: The aim of this Final Project of Career, Implementation of Virtual Engineering with Joomla!, is to create a web software application where a multidisciplinary engineering project bases on the networking, working groups and the flexible working can be implemented. The networking is the job through the Information Technology and Communication (ITC) where working groups compounded of multidisciplinary and multiracial professions, different religions and located in different time zones are created. The multicultural environment, collaboration, flexibility and to share resources are the order of the day on this kind of groups. The flexibility is the ability to adaptability of workers to the productivity demand, with the trust which is placed on them by supervisor people who wait to receive the work completed in a specific form and date. These workers do not need either constant supervision or a fixed site where to do the job. Everything the workers need is on the network, as the information as the tools, that is why they become teleworkers. These workers demand a high use of their knowledge, so it can not be allowed to become obsolete. This would be a great misfortune. That is why they need to continue learning and knowing the new technologies emerging with the aim of getting new revenues. Workers do an intensive use of the information technology and communication, characterized by continuous innovation and technological change. These workers need a broad social and professional network with great power. This network is important to keep updated with innovations taking place at the companies, to apply for a new job, a new technology course etc.. Thanks to Internet services a bigger number of contacts are provided compared to earlier times. The software application of this project is compounded with enough tools with the aim of the workers can carry out their activity and maintenance of the links on their professional nets.

Virtual Excursions: a new way to explore science in class

The educational platform Virtual Science Hub (ViSH) has been developed as part of the GLOBAL excursion European project. ViSH (http://vishub.org/) is a portal where teachers and scientist interact to create virtual excursions to science infrastructures. The main motivation behind the project was to connect teachers - and in consequence their students - to scientific institutions and their wide amount of infrastructures and resources they are working with. Thus the idea of a hub was born that would allow the two worlds of scientists and teachers to connect and to innovate science teaching. The core of the ViSH?s concept design is based on virtual excursions, which allow for a number of pedagogical models to be applied. According to our internal definition a virtual excursion is a tour through some digital context by teachers and pupils on a given topic that is attractive and has an educational purpose. Inquiry-based learning, project-based and problem-based learning are the most prominent approaches that a virtual excursion may serve. The domain specific resources and scientific infrastructures currently available on the ViSH are focusing on life sciences, nano-technology, biotechnology, grid and volunteer computing. The virtual excursion approach allows an easy combination of these resources into interdisciplinary teaching scenarios. In addition, social networking features support the users in collaborating and communicating in relation to these excursions and thus create a community of interest for innovative science teaching. The design and development phases were performed following a participatory design approach. An important aspect in this process was to create design partnerships amongst all actors involved, researchers, developers, infrastructure providers, teachers, social scientists, and pedagogical experts early in the project. A joint sense of ownership was created and important changes during the conceptual phase were implemented in the ViSH due to early user feedback. Technology-wise the ViSH is based on the latest web technologies in order to make it cross-platform compatible so that it works on several operative systems such as Windows, Mac or Linux and multi-device accessible, such as desktop, tablet and mobile devices. The platform has been developed in HTML5, the latest standard for web development, assuring that it can run on any modern browser. In addition to social networking features a core element on the ViSH is the virtual excursions editor. It is a web tool that allows teachers and scientists to create rich mash-ups of learning resources provided by the e-Infrastructures (i.e. remote laboratories and live webcams). These rich mash-ups can be presented in either slides or flashcards format. Taking advantage of the web architecture supported, additional powerful components have been integrated like a recommendation engine to provide personalized suggestions about educational content or interesting users and a videoconference tool to enhance real-time collaboration like MashMeTV (http://www.mashme.tv/).

En un intervalo del límite : una nueva lectura del movimiento moderno desde la realidad virtual de lo ambiguo

Esta tesis doctoral busca estudiar el espacio desde la premisa de que el espacio es, fundamentalmente, lo intermedio. El entre, lo que hay entre las cosas mismas y que les da, precisamente, su definición como cosas en un constante proceso de delimitación. Este entre, lo que hay entre las cosas, no es sin embargo un resto que queda, sino bien al contrario el principio activo que hace que las cosas, desde lo que hay alrededor, se configuren en su ser sensible y puedan percibirse. El entre, lo intermedio, no es así una línea, un corte puro, sino un intervalo, un espacio en sí mismo, un ámbito en que se desarrolla un proceso. Es por tanto un espacio de formación, en el que las cosas aún no son y ya están siendo, un intervalo ambiguo pleno de virtualidades, unas desplegadas otras que permanecen en espera, siempre en movimiento. Es la hipótesis principal de esta tesis que en el llamado Movimiento Moderno en la arquitectura del siglo veinte esta condición ambigua del límite se pone de manifiesto como la raíz articuladora de los cambios espaciales y formales que definen su ser y su estética. Para desarrollar esta hipótesis, se parte de una doble premisa: por una parte, como un entre que es en sí misma, la arquitectura se encuentra delimitada por las disciplinas artísticas contemporáneas, especialmente pintura y escultura y a la vez las delimita. Por tanto, se explorarán una serie de momentos claves en las vanguardias de comienzos del siglo veinte en paralelo a una serie de arquitecturas contemporáneas para estudiar esta doble dialéctica entre límites. Por otra parte, y entendiendo que lo propio de la arquitectura es el espacio, se estudiarán en profundidad las concepciones espaciales que en la física y la estética del finales del siglo diecinueve y principios del veinte se desarrollan, para comprender cómo estas nuevas concepciones, centradas en las ideas de relatividad y de espacio-tiempo como magnitudes interlimitadas, determinan a su vez las concepciones espaciales que se desarrollan simultáneamente en las artes plásticas y en la arquitectura. La tríada espacio/tiempo/luz regirá este recorrido, en un doble camino: a través de la física y la teoría del arte, y a través de la arquitectura y las artes plásticas. Se trata por tanto de incardinar la arquitectura en su contexto artístico y científico, y comprobar cómo la comprensión del espacio como un entre, como un intervalo del límite y no como un absoluto trascendente, se generaliza en dichos ámbitos en una exploración paralela que condiciona los resultados en todos ellos y que define, por tanto, la arquitectura de la modernidad como una arquitectura del entre. El encuadre enmarca como motivo principal el Movimiento Moderno a través de la figura de Le Corbusier. Se muestra el modo en que los recursos y mecanismos empleados provocan el encuentro del espacio indecible a través de la polifonía de las artes. Desde el espaciamiento del límite, su borradura, su ambigüedad, producidos mediante el entrelazamiento de los recursos artísticos, la continuidad de lo lineal, el encabalgamiento, el maridaje, la ambivalencia, la relatividad del color y la luz, el intersticio. Ello se analiza a través de la obra de le Corbusier, destacando la dialéctica entre Le Cheminée y Nature morte aux nombreux objets; Ma maison y el pabellón del Zurichhorn; Unité y L’espace indicible. Aclaradas las premisas fundamentales y las consecuencias inmediatas para la arquitectura del Movimiento Moderno, la cuarta parte y final de la tesis, mucho más breve que las anteriores, expone una primera aproximación a las consecuencias que todo esto ha tenido en un momento liminal también: el comienzo de la postmodernidad. En realidad se trata de una apertura a lo que ha de venir, pues establecida la operatividad de la hipóteisi inicial, se trata aquí solamente de abrir el camino a una interpretación que en realidad escapa del alcance de esta tesis. Así se deja apuntado cómo, a través de la obra de tres arquitectos, teóricos y artistas trabajando en los años setenta y comienzos de los ochenta del pasado siglo, una comprensión más clara de la revolución moderna precipitada por esta nueva comprensión del espacio como límite-entre queda patente. Chamberworks de Daniel Libeskind, Wexner Center for the Visual Arts de Peter Eisenman y Manhattan Transcripts de Bernard Tschumi servirían de privilegiados ejemplo. Como queda patente que las consecuencias de todo ello aún las estamos sintiendo en nuestra contemporaneidad. ABSTRACT This thesis aims to study the space from the premise that space is mainly the in-between. The in-between, what is in-between the things themselves and gives them precisely its definition as things in a constant process of delimitation. This in-between, what is in between things, is not a remnant that remains, but on the contrary it is the active ingredient that produces things from what is around, that configures them in a sensitive to be perceived. The in-between, the intermediate, is not a line, a pure cut, but an interval, a space in itself, an area in which a process is developed. It is therefore a space in development, where things are still not and already been, delimiting an ambiguous range full of potentialities, some present and others that remain only as virtualities. It is the main hypothesis of this thesis that in the so-called Modern Movement in the architecture of the twentieth century this ambiguous boundary condition is revealed as the result of the articulatation of spatial and formal changes. To develop this hypothesis, I posit this double premise: On the one hand, as an in-between which is in itself, architecture is defined by contemporary artistic disciplines, especially painting and sculpture and simultaneously defines them. Therefore, a number of key moments in the avantgarde of the early twentieth century in parallel with a number of contemporary architecture to study this double dialectic between boundaries will be explored. On the other hand, and considering that the “essence” of the architecture is space, I will study in depth the spatial concepts in physics and aesthetics of late-nineteenth century and early twentieth century to understand how these new concepts centered on the ideas of relativity and space-time as interlimited magnitudes in turn determine the spatial conceptions that take place simultaneously in the visual arts and architecture. The space / time / light triad governs this journey in a double way: through physics and theory of art, and through architecture and the arts. The aim is to anchor architecture in its artistic and scientific context, and to see how the understanding of space as an in-between interval and not as an absolute transcendent determines the results in all of them, defining, therefore, the architecture of modernity as an architecture of the in-between. The frame of the study is centered in the modern movement through the figure of Le Corbusier and how rthe different resources and mechanisms employed provoke an unspeakable space of encounter through the polyphony of the arts. From the spacing of the limit, its erasure, its ambiguity, produced by the intertwining of artistic resources to continuity of the linear, the marriage, the ambivalence, the relativity of color and light, the gap. All this is analyzed through the work of Le Corbusier, highlighting the dialectic between Le Cheminée and Nature morte aux nombreux objets, Ma maison and Zürichhorn pavilion, Unité and L’espace indicible. Once the basic premises and immediate consequences for the architecture of the Modern Movement are set, the fourth and final part of the thesis aims to explore the impact that all this has had in another liminal time: the beginning of postmodernism. Of course, this part is shorter, in fact it is more a prospective survey and an opening of possibilities than a truly articulated body of theory, since the conceptual core of this thesis has been developed in the central part. Hence, through the work of three architects, theorists and artists working in the seventies and early eighties of last century, a clearer understanding of the modern revolution precipitated by this new understanding of space as a boundary- between is proposed. Chamberworks by Daniel Libeskind, Wexner Center for the Visual Arts by Peter Eisenman and Manhattan Transcripts by Bernard Tschumi will exemplify this approach. The consequences of all this are still haunting our contemporaneity.

The Virtual Interactive Relationship Between BIM Project Teams: Effective Communication to aid Collaboration in the Design Process

Building Information Modelling (BIM) provides a shared source of information about a built asset, which creates a collaborative virtual environment for project teams. Literature suggests that to collaborate efficiently, the relationship between the project team is based on sympathy, obligation, trust and rapport. Communication increases in importance when working collaboratively but effective communication can only be achieved when the stakeholders are willing to act, react, listen and share information. Case study research and interviews with Architecture, Engineering and Construction (AEC) industry experts suggest that synchronous face-to-face communication is project teams’ preferred method, allowing teams to socialise and build rapport, accelerating the creation of trust between the stakeholders. However, virtual unified communication platforms are a close second-preferred option for communication between the teams. Effective methods for virtual communication in professional practice, such as virtual collaboration environments (CVE), that build trust and achieve similar spontaneous responses as face-to-face communication, are necessary to face the global challenges and can be achieved with the right people, processes and technology. This research paper investigates current industry methods for virtual communication within BIM projects and explores the suitability of avatar interaction in a collaborative virtual environment as an alternative to face-to-face communication to enhance collaboration between design teams’ professional practice on a project. Hence, this paper presents comparisons between the effectiveness of these communication methods within construction design teams with results of further experiments conducted to test recommendations for more efficient methods for virtual communication to add value in the workplace between design teams.

Comparing Common Data Environment Platforms for Student Collaborative Working: A Case Study from Ulster University

PAS1192-2 (2013) outlines the “fundamental principles of Level 2 information modeling”, one of these principles is the use of what is commonly referred to as a Common Data Environment (CDE). A CDE could be described as an internet-enabled cloudhosting platform, accessible to all construction team members to access shared project information. For the construction sector to achieve increased productivity goals, the next generation of industry professionals will need to be educated in a way that provides them with an appreciation of Building Information Modelling (BIM) working methods, at all levels, including an understanding of how data in a CDE should be structured, managed, shared and published. This presents a challenge for educational institutions in terms of providing a CDE that addresses the requirements set out in PAS1192-2, and mirrors organisational and professional working practices without causing confusion due to over complexity. This paper presents the findings of a two-year study undertaken at Ulster University comparing the use of a leading industry CDE platform with one derived from the in-house Virtual Learning Environment (VLE), for the delivery of a student BIM project. The research methodology employed was a qualitative case study analysis, focusing on observations from the academics involved and feedback from students. The results of the study show advantages for both CDE platforms depending on the learning outcomes required.

Ukraine and the European Union: Time for a Re-Think. ACES Working Papers, 2011

There are two reasons for the virtual nature of the West’s dialogue with Ukraine. The first is institutional as the EU has until now only been willing to use ‘carrots’ and ‘sticks’ in ‘enlargement-heavy’ (i.e. full membership) whereas it has only used ‘carrots,’ but never ‘sticks’, in ‘enlargement-light’ (i.e. the DCFTA). European Council Foreign Relations Senior Fellows Nicu Popescu and Andrew Wilson argue that the EU should be more willing to use both carrots and sticks; that is integrating its soft and hard power. The second is a disconnection between the West and Kyiv over definitions of democracy. The Ukrainian authorities have until now wanted to have their cake and eat it, too; rolling back democracy in Kyiv while claiming to sign up to ‘European values’ in Brussels.