Perceptions of residents of hosting the “Guimarães 2012 European Capital of Culture”: An ex-ante approach

The European Capital of Culture is an annual mega-event, which can provide a good forum though which to challenge and engage local citizens, thus generating feelings of common citizenship. In addition, it presents an ideal opportunity to promote the restructuring of the hosting urban space. However, the success of both the organization and the city that hosts the cultural event depends on the residents’ commitment towards it, the consistency of the tourism attractions and activities supplied, and the capacity of anticipating and monitoring the evolution of tourists’ preferences. The present study aims to assess the intention to participate and the impacts perceived by residents of Guimarães from hosting one of the 2012 European Capitals of Culture (2012 ECOC) in the ex-ante period (2011). Through a convenience sample of 471 usable surveys applied to the local population, conducted between October and December 2011, we tried to identify some of these potential impacts. According to the results received, 40% of residents had a low or very low knowledge of the cultural program, although only 11% demonstrated no intention of attending any activity during the event. The comparison of the mean scores of the expected 2012 ECOC impacts by gender reveals that the most valued and least valued factors are common to female and male respondents. With regard to the differences between those that intended to attend the event and the ones that did not, expected participants rated positive and negative impact factors more than did the ones that did not intend to attend.

Perceptions of residents of hosting the “Guimarães 2012 European Capital of Culture”: an ex-ante approach

The European Capital of Culture is an annual mega-event, which can provide a good forum though which to challenge and engage local citizens, thus generating feelings of common citizenship. In addition, it presents an ideal opportunity to promote the restructuring of the hosting urban space. However, the success of both the organization and the city that hosts the cultural event depends on the residents’ commitment towards it, the consistency of the tourism attractions and activities supplied, and the capacity of anticipating and monitoring the evolution of tourists’ preferences. The present study aims to assess the intention to participate and the impacts perceived by residents of Guimarães from hosting one of the 2012 European Capitals of Culture (2012 ECOC) in the ex-ante period (2011). Through a convenience sample of 471 usable surveys applied to the local population, conducted between October and December 2011, we tried to identify some of these potential impacts. According to the results received, 40% of residents had a low or very low knowledge of the cultural program, although only 11% demonstrated no intention of attending any activity during the event. The comparison of the mean scores of the expected 2012 ECOC impacts by gender reveals that the most valued and least valued factors are common to female and male respondents. With regard to the differences between those that intended to attend the event and the ones that did not, expected participants rated positive and negative impact factors more than did the ones that did not intend to attend.

Optimização do tratamento de um efluente aquoso resultante da utilização de cola nas máquinas de produção de placas de madeira

O presente trabalho teve como principais objectivos, estudar e optimizar o processo de tratamento do efluente proveniente das máquinas da unidade Cold-press da linha de produção da Empresa Swedwood, caracterizar a solução límpida obtida no tratamento e estudar a sua integração no processo, e por fim caracterizar o resíduo de pasta de cola obtido no tratamento e estudar a possível valorização energética deste resíduo. Após caracterização inicial do efluente e de acordo com os resultados de um estudo prévio solicitado pela Empresa Swedwood a uma empresa externa, decidiu-se iniciar o estudo de tratabilidade do efluente pelo processo físico-químico a coagulação/floculação. No processo de coagulação/floculação estudou-se a aplicabilidade, através de ensaios Jar-test, dos diferentes agentes de coagulação/floculação: a soda cáustica, a cal, o cloreto férrico e o sulfato de alumínio. Os melhores resultados neste processo foram obtidos com a adição de uma dose de cal de 500 mg/Lefluente, seguida da adição de 400 mg/Lefluente de sulfato de alumínio. Contudo, após este tratamento o clarificado obtido não possuía as características necessárias para a sua reintrodução no processo fabril nem para a sua descarga em meio hídrico. Deste modo procedeu-se ao estudo de tratamentos complementares. Nesta segunda fases de estudo testaram-se os seguintes os tratamentos: a oxidação química por Reagente de Fenton, o tratamento biológico por SBR (sequencing batch reactor) e o leito percolador. Da análise dos resultados obtidos nos diferentes tratamentos conclui-se que o tratamento mais eficaz foi o tratamento biológico por SBR com adição de carvão activado. Prevê-se que no final do processo de tratamento o clarificado obtido possa ser descarregado em meio hídrico ou reintroduzido no processo. Como o estudo apenas foi desenvolvido à escala laboratorial, seria útil poder validar os resultados numa escala piloto antes da sua implementação industrial. A partir dos resultados do estudo experimental, procedeu-se ao dimensionamento de uma unidade de tratamento físico-químico e biológico à escala industrial para o tratamento de 20 m3 de efluente produzido na fábrica, numa semana. Dimensionou-se ainda a unidade (leito de secagem) para tratamento das lamas produzidas. Na unidade de tratamento físico-químico (coagulação/floculação) os decantadores estáticos devem possuir o volume útil de 4,8 m3. Sendo necessários semanalmente 36 L da suspensão de cal (Neutrolac 300) e 12,3 L da solução de sulfato de alumínio a 8,3%. Os tanques de armazenamento destes compostos devem possuir 43,2 litros e 96 litros, respectivamente. Nesta unidade estimou-se que são produzidos diariamente 1,4 m3 de lamas. Na unidade de tratamento biológico o reactor biológico deve possuir um volume útil de 6 m3. Para que este processo seja eficaz é necessário fornecer diariamente 2,1 kg de oxigénio. Estima-se que neste processo será necessário efectuar a purga de 325 litros de lamas semanalmente. No final da purga repõe-se o carvão activado, que poderá ser arrastado juntamente com as lamas, adicionando-se 100 mg de carvão por litro de licor misto. De acordo com o volume de lamas produzidos em ambos os tratamentos a área mínima necessária para o leito de secagem é de cerca de 27 m2. A análise económica efectuada mostra que a aquisição do equipamento tem o custo de 22.079,50 euros, o custo dos reagentes necessários neste processo para um ano de funcionamento tem um custo total de 508,50 euros e as necessidades energéticas de 2.008,45 euros.

Realidade aumentada aplicada ao processo de ensino/aprendizagem. Estudo de caso.

Nas últimas décadas temos assistido a um avanço tecnológico a todos os níveis mas com particular incidência ao nível do hardware e dos dispositivos móveis. Estes tornaram-­‐se cada vez mais leves e mais baratos, e transferiram-­‐se do escritório para o carro, para os equipamentos e para os utensílios. A quantidade de informação (digital) disponível no meio envolvente aumentou de forma exponencial exigindo uma resposta tecnológica com o intuito de melhorar/facilitar o seu acesso e assimilação. É aqui que surge o conceito de Realidade Aumentada a funcionar como uma ponte de ligação entre o real e o digital convidando a novos modelos de interacção com o utilizador. A sua incorporação visa essencialmente tornar os sistemas mais usáveis diminuindo a carga cognitiva inerente à sua utilização. Este trabalho apresenta um estudo de caso, propondo um modelo para a construção de um Objecto de Aprendizagem com recurso a Realidade Aumentada especificamente para a área da saúde. O problema identificado nesta dissertação procura investigar se a integração de técnicas de Realidade Aumentada combinadas com técnicas multimédia e outros materiais convencionais podem contribuir para uma maior motivação e percepção cooperando para a construção de conhecimento.

Dominant set approach to ECG biometrics

Electrocardiographic (ECG) signals are emerging as a recent trend in the field of biometrics. In this paper, we propose a novel ECG biometric system that combines clustering and classification methodologies. Our approach is based on dominant-set clustering, and provides a framework for outlier removal and template selection. It enhances the typical workflows, by making them better suited to new ECG acquisition paradigms that use fingers or hand palms, which lead to signals with lower signal to noise ratio, and more prone to noise artifacts. Preliminary results show the potential of the approach, helping to further validate the highly usable setups and ECG signals as a complementary biometric modality.

Mix design process of polyester polymer mortars modified with recycled GFRP waste materials

In this study, the effect of incorporation of recycled glass fibre reinforced plastics (GFRP) waste materials, obtained by means of shredding and milling processes, on mechanical behaviour of polyester polymer mortars (PM) was assessed. For this purpose, different contents of GFRP recyclates, between 4% up to 12% in weight, were incorporated into polyester PM materials as sand aggregates and filler replacements. The effect of the addition of a silane coupling agent to resin binder was also evaluated. Applied waste material was proceeding from the shredding of the leftovers resultant from the cutting and assembly processes of GFRP pultrusion profiles. Currently, these leftovers as well as non-conform products and scrap resulting from pultrusion manufacturing process are landfilled, with additional costs to producers and suppliers. Hence, besides the evident environmental benefits, a viable and feasible solution for these wastes would also conduct to significant economic advantages. Design of experiments and data treatment were accomplish by means of full factorial design approach and analysis of variance ANOVA. Experimental results were promising toward the recyclability of GFRP waste materials as partial replacement of aggregates and reinforcement for PM materials, with significant improvements on mechanical properties of resultant mortars with regards to waste-free formulations.

From simulation to statistical analysis: timeliness assessment of ethernet/IP-based distributed systems

A number of characteristics are boosting the eagerness of extending Ethernet to also cover factory-floor distributed real-time applications. Full-duplex links, non-blocking and priority-based switching, bandwidth availability, just to mention a few, are characteristics upon which that eagerness is building up. But, will Ethernet technologies really manage to replace traditional Fieldbus networks? Ethernet technology, by itself, does not include features above the lower layers of the OSI communication model. In the past few years, it is particularly significant the considerable amount of work that has been devoted to the timing analysis of Ethernet-based technologies. It happens, however, that the majority of those works are restricted to the analysis of sub-sets of the overall computing and communication system, thus without addressing timeliness at a holistic level. To this end, we are addressing a few inter-linked research topics with the purpose of setting a framework for the development of tools suitable to extract temporal properties of Commercial-Off-The-Shelf (COTS) Ethernet-based factory-floor distributed systems. This framework is being applied to a specific COTS technology, Ethernet/IP. In this paper, we reason about the modelling and simulation of Ethernet/IP-based systems, and on the use of statistical analysis techniques to provide usable results. Discrete event simulation models of a distributed system can be a powerful tool for the timeliness evaluation of the overall system, but particular care must be taken with the results provided by traditional statistical analysis techniques.

EMMON - EMbedded MONitoring

Despite the steady increase in experimental deployments, most of research work on WSNs has focused only on communication protocols and algorithms, with a clear lack of effective, feasible and usable system architectures, integrated in a modular platform able to address both functional and non–functional requirements. In this paper, we outline EMMON [1], a full WSN-based system architecture for large–scale, dense and real–time embedded monitoring [3] applications. EMMON provides a hierarchical communication architecture together with integrated middleware and command and control software. Then, EM-Set, the EMMON engineering toolset will be presented. EM-Set includes a network deployment planning, worst–case analysis and dimensioning, protocol simulation and automatic remote programming and hardware testing tools. This toolset was crucial for the development of EMMON which was designed to use standard commercially available technologies, while maintaining as much flexibility as possible to meet specific applications requirements. Finally, the EMMON architecture has been validated through extensive simulation and experimental evaluation, including a 300+ nodes testbed.

EMMON: a system architecture for large- scale, dense and real-time WSNs

In spite of the significant amount of scientific work in Wireless Sensor Networks (WSNs), there is a clear lack of effective, feasible and usable WSN system architectures that address both functional and non-functional requirements in an integrated fashion. This poster abstract outlines the EMMON system architecture for large-scale, dense, real-time embedded monitoring. EMMON relies on a hierarchical network architecture together with integrated middleware and command&control mechanisms. It has been designed to use standard commercially– available technologies, while maintaining as much flexibility as possible to meet specific applications’ requirements. The EMMON WSN architecture has been validated through extensive simulation and experimental evaluation, including through a 300+ node test-bed, the largest WSN test-bed in Europe to date

Poster: EMMON: a WSN system architecture and toolset for large-scale and dense real-time embedded monitoring

Wireless sensor networks (WSNs) have attracted growing interest in the last decade as an infrastructure to support a diversity of ubiquitous computing and cyber-physical systems. However, most research work has focused on protocols or on specific applications. As a result, there remains a clear lack of effective and usable WSN system architectures that address both functional and non-functional requirements in an integrated fashion. This poster outlines the EMMON system architecture for large-scale, dense, real-time embedded monitoring. It provides a hierarchical communication architecture together with integrated middleware and command and control software. It has been designed to maintain as much as flexibility as possible while meeting specific applications requirements. EMMON has been validated through extensive analytical, simulation and experimental evaluations, including through a 300+ nodes test-bed the largest single-site WSN test-bed in Europe.

EMMON: a WSN system architecture for large scale and dense real-time embedded monitoring

Wireless sensor networks (WSNs) have attracted growing interest in the last decade as an infrastructure to support a diversity of ubiquitous computing and cyber-physical systems. However, most research work has focused on protocols or on specific applications. As a result, there remains a clear lack of effective, feasible and usable system architectures that address both functional and non-functional requirements in an integrated fashion. In this paper, we outline the EMMON system architecture for large-scale, dense, real-time embedded monitoring. EMMON provides a hierarchical communication architecture together with integrated middleware and command and control software. It has been designed to use standard commercially-available technologies, while maintaining as much flexibility as possible to meet specific applications requirements. The EMMON architecture has been validated through extensive simulation and experimental evaluation, including a 300+ node test-bed, which is, to the best of our knowledge, the largest single-site WSN test-bed in Europe to date.

Avaliação de custos e avaliação de fornecedores

O presente trabalho tem como principais objetivos caracterizar os trabalhos efetuados ao longo do estágio realizado na Tramel, empresa de serralharia civil, e efetuar um estudo de avaliação de fornecedores de alumínio. O estágio desenvolveu-se essencialmente no departamento comercial e de orçamentos e no departamento de qualidade da empresa. De forma a poder desenvolver um trabalho que reunisse informação destas duas áreas foi realizado um estudo de avaliação de fornecedores de alumínio em termos de custos e de qualidade. Assim este trabalho começa por descrever o que são as serralharias, dando especial atenção aos principais materiais utilizados na empresa e tipos de tratamento usados. Depois faz uma breve referência à evolução histórica da orçamentação, distinguindo os diferentes tipos de custos e ainda à qualidade e à importância de um sistema de gestão de qualidade numa empresa. Posteriormente são referidos os trabalhos efetuados ao longo do estágio que foram previamente definidos no plano de trabalhos. Por fim é apresentado o estudo de avaliação de fornecedores de alumínio. Foram estudados os quatro principais fornecedores de alumínio da empresa e para diversos tipos de caixilhos foi determinado o custo, distinguindo no final a percentagem necessária de perfis, acessórios, tratamento, mão de obra para fabrico, lacagem e sobras. Depois é realizada uma avaliação em termos de qualidade com base em inquéritos distribuídos aos colaboradores. Finalizado o estudo realizado são tiradas conclusões e sugeridas perspetivas futuras.

Personalized public transportation information

Thesis to obtain the Master of Science Degree in Computer Science and Engineering

Design of experiments applied to the mix design process of polymer mortar materials modified with GFRP recyclates

In this work, the effect of incorporation of recycled glass fibre reinforced plastics (GFRP) waste materials, obtained by means of shredding and milling processes, on mechanical behavior of polyester polymer mortar (PM) materials was assessed. For this purpose, different contents of GFRP recyclates (between 4% up to 12% in mass), were incorporated into polyester PM materials as sand aggregates and filler replacements. The effect of silane coupling agent addition to resin binder was also evaluated. Applied waste material was proceeding from the shredding of the leftovers resultant from the cutting and assembly processes of GFRP pultrusion profiles. Currently, these leftovers, jointly with unfinished products and scrap resulting from pultrusion manufacturing process, are landfilled, with supplementary added costs. Thus, besides the evident environmental benefits, a viable and feasible solution for these wastes would also conduct to significant economic advantages. Design of experiments and data treatment were accomplish by means of full factorial design approach and analysis of variance ANOVA. Experimental results were promising toward the recyclability of GFRP waste materials as aggregates and reinforcement for PM materials, with significant improvements on mechanical properties with regard to non-modified formulations.

Humidity passive sensors based on UHF RFID using cork dielectric slabs

In this paper we show the design of passive UHF RFID tag antenna on cork substrate. Due to the cork sensitivity to humidity changes, we can use the developed sensor to sense changes in the relative humidity of the environment, without the need for batteries. The antenna is built using inkjet printing technology, which allows a good accuracy of the design manufacturing. The sensor proved usable for humidity changes detection with a variation of threshold power from 11 to 15 dB between 60 and near 100% humidity levels. Presenting, therefore, reading ranges between 3 to 5 meters. © 2015 EurAAP.